--- /dev/null
+-------------------------------------------------------------------------------
+ES51978 based multimeter, serial communication
+-------------------------------------------------------------------------------
+
+This is a set of example captures of the serial (UART) communication and
+its timings on an optical RS232 cable for the ISO-TECH IDM103N digital
+multimeter based on the Cyrustek ES51978 chip.
+
+The UART parameters are 2400 baud, with 7e1 settings.
+
+Details:
+http://www.cyrustek.com.tw/spec/ES51978.pdf
+
+
+Logic analyzer setup
+--------------------
+
+The logic analyzer used was an OpenBench Logic Sniffer :
+
+ Probe RS232 Cable
+ -------------------------
+ 0 RX
+
+
+Data
+----
+
+Contains 3 samples sent by the multimeter set in resistance mode, mesuring
+skin resistance, a few Mega Ohm.
+
+The sigrok command line used was:
+
+ sigrok-cli -d ols:conn=/dev/ttyACM0 -c samplerate=100khz:rle=1 \
+ -p 0=RX -t RX=0 -o es51978.sr --samples=245760