--- /dev/null
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * irmp.c - infrared multi-protocol decoder, supports several remote control protocols
+ *
+ * Copyright (c) 2009-2019 Frank Meyer - frank(at)fli4l.de
+ *
+ * Supported AVR mikrocontrollers:
+ *
+ * ATtiny87, ATtiny167
+ * ATtiny45, ATtiny85
+ * ATtiny44, ATtiny84
+ * ATmega8, ATmega16, ATmega32
+ * ATmega162
+ * ATmega164, ATmega324, ATmega644, ATmega644P, ATmega1284, ATmega1284P
+ * ATmega88, ATmega88P, ATmega168, ATmega168P, ATmega328P
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+
+#include "irmp.h"
+
+#if IRMP_SUPPORT_GRUNDIG_PROTOCOL == 1 || IRMP_SUPPORT_NOKIA_PROTOCOL == 1 || IRMP_SUPPORT_IR60_PROTOCOL == 1
+# define IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL 1
+#else
+# define IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL 0
+#endif
+
+#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 || IRMP_SUPPORT_RUWIDO_PROTOCOL == 1
+# define IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL 1
+#else
+# define IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL 0
+#endif
+
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 || \
+ IRMP_SUPPORT_RCII_PROTOCOL == 1 || \
+ IRMP_SUPPORT_S100_PROTOCOL == 1 || \
+ IRMP_SUPPORT_RC6_PROTOCOL == 1 || \
+ IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL == 1 || \
+ IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1 || \
+ IRMP_SUPPORT_IR60_PROTOCOL == 1 || \
+ IRMP_SUPPORT_A1TVBOX_PROTOCOL == 1 || \
+ IRMP_SUPPORT_MERLIN_PROTOCOL == 1 || \
+ IRMP_SUPPORT_ORTEK_PROTOCOL == 1
+# define IRMP_SUPPORT_MANCHESTER 1
+#else
+# define IRMP_SUPPORT_MANCHESTER 0
+#endif
+
+#if IRMP_SUPPORT_NETBOX_PROTOCOL == 1
+# define IRMP_SUPPORT_SERIAL 1
+#else
+# define IRMP_SUPPORT_SERIAL 0
+#endif
+
+#define IRMP_KEY_REPETITION_LEN (uint_fast16_t)(F_INTERRUPTS * 150.0e-3 + 0.5) // autodetect key repetition within 150 msec
+
+#define MIN_TOLERANCE_00 1.0 // -0%
+#define MAX_TOLERANCE_00 1.0 // +0%
+
+#define MIN_TOLERANCE_02 0.98 // -2%
+#define MAX_TOLERANCE_02 1.02 // +2%
+
+#define MIN_TOLERANCE_03 0.97 // -3%
+#define MAX_TOLERANCE_03 1.03 // +3%
+
+#define MIN_TOLERANCE_05 0.95 // -5%
+#define MAX_TOLERANCE_05 1.05 // +5%
+
+#define MIN_TOLERANCE_10 0.9 // -10%
+#define MAX_TOLERANCE_10 1.1 // +10%
+
+#define MIN_TOLERANCE_15 0.85 // -15%
+#define MAX_TOLERANCE_15 1.15 // +15%
+
+#define MIN_TOLERANCE_20 0.8 // -20%
+#define MAX_TOLERANCE_20 1.2 // +20%
+
+#define MIN_TOLERANCE_30 0.7 // -30%
+#define MAX_TOLERANCE_30 1.3 // +30%
+
+#define MIN_TOLERANCE_40 0.6 // -40%
+#define MAX_TOLERANCE_40 1.4 // +40%
+
+#define MIN_TOLERANCE_50 0.5 // -50%
+#define MAX_TOLERANCE_50 1.5 // +50%
+
+#define MIN_TOLERANCE_60 0.4 // -60%
+#define MAX_TOLERANCE_60 1.6 // +60%
+
+#define MIN_TOLERANCE_70 0.3 // -70%
+#define MAX_TOLERANCE_70 1.7 // +70%
+
+#define SIRCS_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIRCS_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define SIRCS_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIRCS_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define SIRCS_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIRCS_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#if IRMP_SUPPORT_NETBOX_PROTOCOL // only 5% to avoid conflict with NETBOX:
+# define SIRCS_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIRCS_START_BIT_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5))
+#else // only 5% + 1 to avoid conflict with RC6:
+# define SIRCS_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIRCS_START_BIT_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
+#endif
+#define SIRCS_1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIRCS_1_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define SIRCS_1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIRCS_1_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define SIRCS_0_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIRCS_0_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define SIRCS_0_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIRCS_0_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define SIRCS_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIRCS_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define SIRCS_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIRCS_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+
+#define NEC_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NEC_START_BIT_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define NEC_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NEC_START_BIT_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define NEC_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NEC_START_BIT_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define NEC_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NEC_START_BIT_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define NEC_REPEAT_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NEC_REPEAT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define NEC_REPEAT_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NEC_REPEAT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define NEC_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NEC_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define NEC_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NEC_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define NEC_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NEC_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define NEC_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NEC_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define NEC_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NEC_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define NEC_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NEC_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+// autodetect nec repetition frame within 50 msec:
+// NEC seems to send the first repetition frame after 40ms, further repetition frames after 100 ms
+#if 0
+#define NEC_FRAME_REPEAT_PAUSE_LEN_MAX (uint_fast16_t)(F_INTERRUPTS * NEC_FRAME_REPEAT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5)
+#else
+#define NEC_FRAME_REPEAT_PAUSE_LEN_MAX (uint_fast16_t)(F_INTERRUPTS * 100.0e-3 * MAX_TOLERANCE_20 + 0.5)
+#endif
+
+#define SAMSUNG_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define SAMSUNG_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define SAMSUNG_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define SAMSUNG_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define SAMSUNG_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define SAMSUNG_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define SAMSUNG_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define SAMSUNG_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define SAMSUNG_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define SAMSUNG_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+
+#define SAMSUNGAH_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define SAMSUNGAH_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define SAMSUNGAH_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define SAMSUNGAH_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define SAMSUNGAH_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define SAMSUNGAH_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define SAMSUNGAH_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define SAMSUNGAH_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define SAMSUNGAH_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define SAMSUNGAH_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+
+#define MATSUSHITA_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define MATSUSHITA_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define MATSUSHITA_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define MATSUSHITA_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define MATSUSHITA_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define MATSUSHITA_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+#define MATSUSHITA_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_1_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define MATSUSHITA_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_1_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+#define MATSUSHITA_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_0_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define MATSUSHITA_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_0_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+
+#define KASEIKYO_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define KASEIKYO_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define KASEIKYO_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define KASEIKYO_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define KASEIKYO_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define KASEIKYO_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+#define KASEIKYO_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define KASEIKYO_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define KASEIKYO_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define KASEIKYO_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+
+#define MITSU_HEAVY_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define MITSU_HEAVY_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define MITSU_HEAVY_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define MITSU_HEAVY_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define MITSU_HEAVY_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define MITSU_HEAVY_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+#define MITSU_HEAVY_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define MITSU_HEAVY_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define MITSU_HEAVY_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define MITSU_HEAVY_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+
+#define VINCENT_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * VINCENT_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define VINCENT_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * VINCENT_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define VINCENT_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * VINCENT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define VINCENT_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * VINCENT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define VINCENT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * VINCENT_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define VINCENT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * VINCENT_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+#define VINCENT_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * VINCENT_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define VINCENT_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * VINCENT_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define VINCENT_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * VINCENT_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define VINCENT_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * VINCENT_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+
+#define PANASONIC_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define PANASONIC_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define PANASONIC_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define PANASONIC_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define PANASONIC_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define PANASONIC_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+#define PANASONIC_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define PANASONIC_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define PANASONIC_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define PANASONIC_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+
+#define RECS80_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define RECS80_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define RECS80_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RECS80_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define RECS80_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define RECS80_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define RECS80_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RECS80_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define RECS80_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RECS80_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+
+#if IRMP_SUPPORT_BOSE_PROTOCOL == 1 // BOSE conflicts with RC5, so keep tolerance for RC5 minimal here:
+#define RC5_START_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC5_BIT_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
+#define RC5_START_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC5_BIT_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
+#else
+#define RC5_START_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC5_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RC5_START_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC5_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#endif
+
+#define RC5_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC5_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RC5_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC5_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+
+#define RCII_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCII_START_BIT_PULSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
+#define RCII_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCII_START_BIT_PULSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
+#define RCII_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCII_START_BIT_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
+#define RCII_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCII_START_BIT_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
+#define RCII_START_BIT2_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCII_START_BIT2_PULSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
+#define RCII_START_BIT2_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCII_START_BIT2_PULSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
+
+#define RCII_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCII_BIT_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define RCII_BIT_LEN ((uint_fast8_t)(F_INTERRUPTS * RCII_BIT_TIME))
+#define RCII_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCII_BIT_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+
+#if IRMP_SUPPORT_BOSE_PROTOCOL == 1 // BOSE conflicts with S100, so keep tolerance for S100 minimal here:
+#define S100_START_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * S100_BIT_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
+#define S100_START_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * S100_BIT_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
+#else
+#define S100_START_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * S100_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define S100_START_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * S100_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#endif
+
+#define S100_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * S100_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define S100_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * S100_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+
+#define DENON_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * DENON_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define DENON_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * DENON_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define DENON_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * DENON_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define DENON_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * DENON_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+// RUWIDO (see t-home-mediareceiver-15kHz.txt) conflicts here with DENON
+#define DENON_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * DENON_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define DENON_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * DENON_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define DENON_AUTO_REPETITION_PAUSE_LEN ((uint_fast16_t)(F_INTERRUPTS * DENON_AUTO_REPETITION_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+
+#define THOMSON_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * THOMSON_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define THOMSON_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * THOMSON_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define THOMSON_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * THOMSON_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define THOMSON_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * THOMSON_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define THOMSON_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * THOMSON_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define THOMSON_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * THOMSON_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+
+#define RC6_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC6_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RC6_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC6_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define RC6_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC6_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RC6_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC6_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define RC6_TOGGLE_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC6_TOGGLE_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RC6_TOGGLE_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC6_TOGGLE_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define RC6_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC6_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RC6_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC6_BIT_TIME * MAX_TOLERANCE_60 + 0.5) + 1) // pulses: 300 - 800
+#define RC6_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC6_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RC6_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC6_BIT_TIME * MAX_TOLERANCE_20 + 0.5) + 1) // pauses: 300 - 600
+
+#define RECS80EXT_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define RECS80EXT_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define RECS80EXT_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RECS80EXT_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define RECS80EXT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define RECS80EXT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define RECS80EXT_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RECS80EXT_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define RECS80EXT_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RECS80EXT_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+
+#define NUBERT_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NUBERT_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define NUBERT_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NUBERT_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define NUBERT_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NUBERT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define NUBERT_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NUBERT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define NUBERT_1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NUBERT_1_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define NUBERT_1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NUBERT_1_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define NUBERT_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NUBERT_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define NUBERT_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NUBERT_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define NUBERT_0_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NUBERT_0_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define NUBERT_0_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NUBERT_0_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define NUBERT_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NUBERT_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define NUBERT_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NUBERT_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+
+#define FAN_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define FAN_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define FAN_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define FAN_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define FAN_1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_1_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define FAN_1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_1_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define FAN_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define FAN_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define FAN_0_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_0_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define FAN_0_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_0_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define FAN_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define FAN_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+
+#define SPEAKER_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define SPEAKER_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define SPEAKER_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define SPEAKER_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define SPEAKER_1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_1_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define SPEAKER_1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_1_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define SPEAKER_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define SPEAKER_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define SPEAKER_0_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_0_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define SPEAKER_0_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_0_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define SPEAKER_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define SPEAKER_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+
+#define BANG_OLUFSEN_START_BIT1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT1_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define BANG_OLUFSEN_START_BIT1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT1_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define BANG_OLUFSEN_START_BIT2_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT2_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define BANG_OLUFSEN_START_BIT2_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT2_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define BANG_OLUFSEN_START_BIT2_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT2_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define BANG_OLUFSEN_START_BIT2_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT2_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define BANG_OLUFSEN_START_BIT3_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT3_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define BANG_OLUFSEN_START_BIT3_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT3_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT3_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MAX ((PAUSE_LEN)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT3_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1) // value must be below IRMP_TIMEOUT
+#define BANG_OLUFSEN_START_BIT4_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT4_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define BANG_OLUFSEN_START_BIT4_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT4_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT4_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT4_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define BANG_OLUFSEN_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define BANG_OLUFSEN_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define BANG_OLUFSEN_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define BANG_OLUFSEN_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define BANG_OLUFSEN_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define BANG_OLUFSEN_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define BANG_OLUFSEN_R_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_R_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define BANG_OLUFSEN_R_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_R_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define BANG_OLUFSEN_TRAILER_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define BANG_OLUFSEN_TRAILER_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+
+#define IR60_TIMEOUT_LEN ((uint_fast8_t)(F_INTERRUPTS * IR60_TIMEOUT_TIME * 0.5))
+#define GRUNDIG_NOKIA_IR60_START_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define GRUNDIG_NOKIA_IR60_START_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define GRUNDIG_NOKIA_IR60_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define GRUNDIG_NOKIA_IR60_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) + 1)
+#define GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+
+#define SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define SIEMENS_OR_RUWIDO_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define SIEMENS_OR_RUWIDO_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define SIEMENS_OR_RUWIDO_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define SIEMENS_OR_RUWIDO_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+
+#define FDC_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FDC_START_BIT_PULSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1) // 5%: avoid conflict with NETBOX
+#define FDC_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FDC_START_BIT_PULSE_TIME * MAX_TOLERANCE_05 + 0.5))
+#define FDC_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FDC_START_BIT_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
+#define FDC_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FDC_START_BIT_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5))
+#define FDC_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FDC_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define FDC_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FDC_PULSE_TIME * MAX_TOLERANCE_50 + 0.5) + 1)
+#define FDC_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FDC_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define FDC_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FDC_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#if 0
+#define FDC_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FDC_0_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) // could be negative: 255
+#else
+#define FDC_0_PAUSE_LEN_MIN (1) // simply use 1
+#endif
+#define FDC_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FDC_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+
+#define RCCAR_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCCAR_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RCCAR_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCCAR_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define RCCAR_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCCAR_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RCCAR_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCCAR_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define RCCAR_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCCAR_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define RCCAR_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCCAR_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define RCCAR_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCCAR_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define RCCAR_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCCAR_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define RCCAR_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCCAR_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define RCCAR_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCCAR_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+
+#define JVC_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * JVC_START_BIT_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define JVC_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * JVC_START_BIT_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+#define JVC_REPEAT_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * (JVC_FRAME_REPEAT_PAUSE_TIME - IRMP_TIMEOUT_TIME) * MIN_TOLERANCE_40 + 0.5) - 1) // HACK!
+#define JVC_REPEAT_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * (JVC_FRAME_REPEAT_PAUSE_TIME - IRMP_TIMEOUT_TIME) * MAX_TOLERANCE_70 + 0.5) - 1) // HACK!
+#define JVC_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * JVC_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define JVC_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * JVC_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+#define JVC_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * JVC_1_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define JVC_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * JVC_1_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+#define JVC_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * JVC_0_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define JVC_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * JVC_0_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+// autodetect JVC repetition frame within 50 msec:
+#define JVC_FRAME_REPEAT_PAUSE_LEN_MAX (uint_fast16_t)(F_INTERRUPTS * JVC_FRAME_REPEAT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5)
+
+#define NIKON_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NIKON_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define NIKON_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NIKON_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define NIKON_START_BIT_PAUSE_LEN_MIN ((uint_fast16_t)(F_INTERRUPTS * NIKON_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define NIKON_START_BIT_PAUSE_LEN_MAX ((uint_fast16_t)(F_INTERRUPTS * NIKON_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define NIKON_REPEAT_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NIKON_REPEAT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define NIKON_REPEAT_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NIKON_REPEAT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define NIKON_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NIKON_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define NIKON_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NIKON_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define NIKON_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NIKON_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define NIKON_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NIKON_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define NIKON_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NIKON_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define NIKON_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NIKON_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define NIKON_FRAME_REPEAT_PAUSE_LEN_MAX (uint_fast16_t)(F_INTERRUPTS * NIKON_FRAME_REPEAT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5)
+
+#define KATHREIN_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define KATHREIN_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define KATHREIN_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define KATHREIN_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define KATHREIN_1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_1_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define KATHREIN_1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_1_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define KATHREIN_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define KATHREIN_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define KATHREIN_0_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_0_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define KATHREIN_0_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_0_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define KATHREIN_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define KATHREIN_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define KATHREIN_SYNC_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_SYNC_BIT_PAUSE_LEN_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define KATHREIN_SYNC_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_SYNC_BIT_PAUSE_LEN_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+
+#define NETBOX_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NETBOX_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define NETBOX_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NETBOX_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define NETBOX_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NETBOX_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define NETBOX_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NETBOX_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define NETBOX_PULSE_LEN ((uint_fast8_t)(F_INTERRUPTS * NETBOX_PULSE_TIME))
+#define NETBOX_PAUSE_LEN ((uint_fast8_t)(F_INTERRUPTS * NETBOX_PAUSE_TIME))
+#define NETBOX_PULSE_REST_LEN ((uint_fast8_t)(F_INTERRUPTS * NETBOX_PULSE_TIME / 4))
+#define NETBOX_PAUSE_REST_LEN ((uint_fast8_t)(F_INTERRUPTS * NETBOX_PAUSE_TIME / 4))
+
+#define LEGO_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * LEGO_START_BIT_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define LEGO_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * LEGO_START_BIT_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+#define LEGO_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * LEGO_START_BIT_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define LEGO_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * LEGO_START_BIT_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+#define LEGO_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * LEGO_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define LEGO_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * LEGO_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+#define LEGO_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * LEGO_1_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define LEGO_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * LEGO_1_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+#define LEGO_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * LEGO_0_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
+#define LEGO_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * LEGO_0_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
+
+#define IRMP16_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * IRMP16_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define IRMP16_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * IRMP16_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define IRMP16_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * IRMP16_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define IRMP16_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * IRMP16_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define IRMP16_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * IRMP16_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define IRMP16_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * IRMP16_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define IRMP16_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * IRMP16_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define IRMP16_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * IRMP16_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define IRMP16_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * IRMP16_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define IRMP16_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * IRMP16_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+
+#define GREE_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * GREE_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define GREE_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * GREE_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define GREE_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * GREE_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define GREE_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * GREE_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define GREE_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * GREE_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define GREE_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * GREE_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define GREE_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * GREE_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define GREE_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * GREE_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define GREE_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * GREE_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define GREE_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * GREE_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+
+#define BOSE_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BOSE_START_BIT_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define BOSE_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BOSE_START_BIT_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define BOSE_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BOSE_START_BIT_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define BOSE_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BOSE_START_BIT_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define BOSE_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BOSE_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define BOSE_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BOSE_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define BOSE_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BOSE_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define BOSE_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BOSE_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define BOSE_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BOSE_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define BOSE_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BOSE_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define BOSE_FRAME_REPEAT_PAUSE_LEN_MAX (uint_fast16_t)(F_INTERRUPTS * 100.0e-3 * MAX_TOLERANCE_20 + 0.5)
+
+#define A1TVBOX_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define A1TVBOX_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define A1TVBOX_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define A1TVBOX_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define A1TVBOX_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_BIT_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define A1TVBOX_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_BIT_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define A1TVBOX_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_BIT_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define A1TVBOX_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_BIT_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+
+#define MERLIN_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MERLIN_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define MERLIN_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MERLIN_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define MERLIN_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MERLIN_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define MERLIN_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MERLIN_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define MERLIN_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MERLIN_BIT_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define MERLIN_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MERLIN_BIT_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define MERLIN_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MERLIN_BIT_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define MERLIN_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MERLIN_BIT_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+
+#define ORTEK_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ORTEK_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define ORTEK_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ORTEK_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define ORTEK_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ORTEK_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define ORTEK_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ORTEK_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define ORTEK_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ORTEK_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define ORTEK_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ORTEK_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define ORTEK_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ORTEK_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define ORTEK_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ORTEK_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+
+#define TELEFUNKEN_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define TELEFUNKEN_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define TELEFUNKEN_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * (TELEFUNKEN_START_BIT_PAUSE_TIME) * MIN_TOLERANCE_10 + 0.5) - 1)
+#define TELEFUNKEN_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * (TELEFUNKEN_START_BIT_PAUSE_TIME) * MAX_TOLERANCE_10 + 0.5) - 1)
+#define TELEFUNKEN_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define TELEFUNKEN_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define TELEFUNKEN_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define TELEFUNKEN_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+#define TELEFUNKEN_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
+#define TELEFUNKEN_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
+// autodetect TELEFUNKEN repetition frame within 50 msec:
+// #define TELEFUNKEN_FRAME_REPEAT_PAUSE_LEN_MAX (uint_fast16_t)(F_INTERRUPTS * TELEFUNKEN_FRAME_REPEAT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5)
+
+#define ROOMBA_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define ROOMBA_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define ROOMBA_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define ROOMBA_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define ROOMBA_1_PAUSE_LEN_EXACT ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_1_PAUSE_TIME + 0.5))
+#define ROOMBA_1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_1_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define ROOMBA_1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_1_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define ROOMBA_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define ROOMBA_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define ROOMBA_0_PAUSE_LEN ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_0_PAUSE_TIME))
+#define ROOMBA_0_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_0_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define ROOMBA_0_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_0_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define ROOMBA_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define ROOMBA_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+
+#define RCMM32_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCMM32_START_BIT_PULSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
+#define RCMM32_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCMM32_START_BIT_PULSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
+#define RCMM32_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCMM32_START_BIT_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
+#define RCMM32_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCMM32_START_BIT_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
+#define RCMM32_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCMM32_PULSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
+#define RCMM32_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCMM32_PULSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
+#define RCMM32_BIT_00_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCMM32_00_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
+#define RCMM32_BIT_00_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCMM32_00_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
+#define RCMM32_BIT_01_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCMM32_01_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
+#define RCMM32_BIT_01_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCMM32_01_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
+#define RCMM32_BIT_10_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCMM32_10_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
+#define RCMM32_BIT_10_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCMM32_10_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
+#define RCMM32_BIT_11_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCMM32_11_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
+#define RCMM32_BIT_11_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCMM32_11_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
+
+#define PENTAX_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PENTAX_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define PENTAX_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PENTAX_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define PENTAX_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PENTAX_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define PENTAX_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PENTAX_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define PENTAX_1_PAUSE_LEN_EXACT ((uint_fast8_t)(F_INTERRUPTS * PENTAX_1_PAUSE_TIME + 0.5))
+#define PENTAX_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PENTAX_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define PENTAX_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PENTAX_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define PENTAX_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PENTAX_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define PENTAX_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PENTAX_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define PENTAX_0_PAUSE_LEN ((uint_fast8_t)(F_INTERRUPTS * PENTAX_0_PAUSE_TIME))
+#define PENTAX_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PENTAX_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define PENTAX_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PENTAX_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define PENTAX_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PENTAX_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define PENTAX_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PENTAX_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+
+#define ACP24_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ACP24_START_BIT_PULSE_TIME * MIN_TOLERANCE_15 + 0.5) - 1)
+#define ACP24_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ACP24_START_BIT_PULSE_TIME * MAX_TOLERANCE_15 + 0.5) + 1)
+#define ACP24_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ACP24_START_BIT_PAUSE_TIME * MIN_TOLERANCE_15 + 0.5) - 1)
+#define ACP24_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ACP24_START_BIT_PAUSE_TIME * MAX_TOLERANCE_15 + 0.5) + 1)
+#define ACP24_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ACP24_PULSE_TIME * MIN_TOLERANCE_15 + 0.5) - 1)
+#define ACP24_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ACP24_PULSE_TIME * MAX_TOLERANCE_15 + 0.5) + 1)
+#define ACP24_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ACP24_1_PAUSE_TIME * MIN_TOLERANCE_15 + 0.5) - 1)
+#define ACP24_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ACP24_1_PAUSE_TIME * MAX_TOLERANCE_15 + 0.5) + 1)
+#define ACP24_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ACP24_0_PAUSE_TIME * MIN_TOLERANCE_15 + 0.5) - 1)
+#define ACP24_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ACP24_0_PAUSE_TIME * MAX_TOLERANCE_15 + 0.5) + 1)
+
+#define METZ_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * METZ_START_BIT_PULSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
+#define METZ_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * METZ_START_BIT_PULSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
+#define METZ_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * METZ_START_BIT_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
+#define METZ_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * METZ_START_BIT_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
+#define METZ_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * METZ_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define METZ_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * METZ_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define METZ_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * METZ_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define METZ_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * METZ_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define METZ_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * METZ_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define METZ_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * METZ_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define METZ_FRAME_REPEAT_PAUSE_LEN_MAX (uint_fast16_t)(F_INTERRUPTS * METZ_FRAME_REPEAT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5)
+
+#define RADIO1_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RADIO1_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RADIO1_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RADIO1_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define RADIO1_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RADIO1_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
+#define RADIO1_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RADIO1_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
+#define RADIO1_1_PAUSE_LEN_EXACT ((uint_fast8_t)(F_INTERRUPTS * RADIO1_1_PAUSE_TIME + 0.5))
+#define RADIO1_1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RADIO1_1_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define RADIO1_1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RADIO1_1_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define RADIO1_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RADIO1_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define RADIO1_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RADIO1_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define RADIO1_0_PAUSE_LEN ((uint_fast8_t)(F_INTERRUPTS * RADIO1_0_PAUSE_TIME))
+#define RADIO1_0_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RADIO1_0_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define RADIO1_0_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RADIO1_0_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+#define RADIO1_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RADIO1_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
+#define RADIO1_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RADIO1_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
+
+#define AUTO_FRAME_REPETITION_LEN (uint_fast16_t)(F_INTERRUPTS * AUTO_FRAME_REPETITION_TIME + 0.5) // use uint_fast16_t!
+
+#ifdef ANALYZE
+# define ANALYZE_PUTCHAR(a) { if (! silent) { putchar (a); } }
+# define ANALYZE_ONLY_NORMAL_PUTCHAR(a) { if (! silent && !verbose) { putchar (a); } }
+# define ANALYZE_PRINTF(...) { if (verbose) { printf (__VA_ARGS__); } }
+# define ANALYZE_ONLY_NORMAL_PRINTF(...) { if (! silent && !verbose) { printf (__VA_ARGS__); } }
+# define ANALYZE_NEWLINE() { if (verbose) { putchar ('\n'); } }
+static int silent;
+static int time_counter;
+static int verbose;
+
+/******************************* not every PIC compiler knows variadic macros :-(
+#else
+# define ANALYZE_PUTCHAR(a)
+# define ANALYZE_ONLY_NORMAL_PUTCHAR(a)
+# define ANALYZE_PRINTF(...)
+# define ANALYZE_ONLY_NORMAL_PRINTF(...)
+# endif
+# define ANALYZE_NEWLINE()
+*********************************/
+#endif
+
+#if IRMP_USE_CALLBACK == 1
+static void (*irmp_callback_ptr) (uint_fast8_t);
+#endif // IRMP_USE_CALLBACK == 1
+
+#define PARITY_CHECK_OK 1
+#define PARITY_CHECK_FAILED 0
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Protocol names
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#if defined(UNIX_OR_WINDOWS) || IRMP_PROTOCOL_NAMES == 1
+static const char proto_unknown[] PROGMEM = "UNKNOWN";
+static const char proto_sircs[] PROGMEM = "SIRCS";
+static const char proto_nec[] PROGMEM = "NEC";
+static const char proto_samsung[] PROGMEM = "SAMSUNG";
+static const char proto_matsushita[] PROGMEM = "MATSUSH";
+static const char proto_kaseikyo[] PROGMEM = "KASEIKYO";
+static const char proto_recs80[] PROGMEM = "RECS80";
+static const char proto_rc5[] PROGMEM = "RC5";
+static const char proto_denon[] PROGMEM = "DENON";
+static const char proto_rc6[] PROGMEM = "RC6";
+static const char proto_samsung32[] PROGMEM = "SAMSG32";
+static const char proto_apple[] PROGMEM = "APPLE";
+static const char proto_recs80ext[] PROGMEM = "RECS80EX";
+static const char proto_nubert[] PROGMEM = "NUBERT";
+static const char proto_bang_olufsen[] PROGMEM = "BANG OLU";
+static const char proto_grundig[] PROGMEM = "GRUNDIG";
+static const char proto_nokia[] PROGMEM = "NOKIA";
+static const char proto_siemens[] PROGMEM = "SIEMENS";
+static const char proto_fdc[] PROGMEM = "FDC";
+static const char proto_rccar[] PROGMEM = "RCCAR";
+static const char proto_jvc[] PROGMEM = "JVC";
+static const char proto_rc6a[] PROGMEM = "RC6A";
+static const char proto_nikon[] PROGMEM = "NIKON";
+static const char proto_ruwido[] PROGMEM = "RUWIDO";
+static const char proto_ir60[] PROGMEM = "IR60";
+static const char proto_kathrein[] PROGMEM = "KATHREIN";
+static const char proto_netbox[] PROGMEM = "NETBOX";
+static const char proto_nec16[] PROGMEM = "NEC16";
+static const char proto_nec42[] PROGMEM = "NEC42";
+static const char proto_lego[] PROGMEM = "LEGO";
+static const char proto_thomson[] PROGMEM = "THOMSON";
+static const char proto_bose[] PROGMEM = "BOSE";
+static const char proto_a1tvbox[] PROGMEM = "A1TVBOX";
+static const char proto_ortek[] PROGMEM = "ORTEK";
+static const char proto_telefunken[] PROGMEM = "TELEFUNKEN";
+static const char proto_roomba[] PROGMEM = "ROOMBA";
+static const char proto_rcmm32[] PROGMEM = "RCMM32";
+static const char proto_rcmm24[] PROGMEM = "RCMM24";
+static const char proto_rcmm12[] PROGMEM = "RCMM12";
+static const char proto_speaker[] PROGMEM = "SPEAKER";
+static const char proto_lgair[] PROGMEM = "LGAIR";
+static const char proto_samsung48[] PROGMEM = "SAMSG48";
+static const char proto_merlin[] PROGMEM = "MERLIN";
+static const char proto_pentax[] PROGMEM = "PENTAX";
+static const char proto_fan[] PROGMEM = "FAN";
+static const char proto_s100[] PROGMEM = "S100";
+static const char proto_acp24[] PROGMEM = "ACP24";
+static const char proto_technics[] PROGMEM = "TECHNICS";
+static const char proto_panasonic[] PROGMEM = "PANASONIC";
+static const char proto_mitsu_heavy[] PROGMEM = "MITSU_HEAVY";
+static const char proto_vincent[] PROGMEM = "VINCENT";
+static const char proto_samsungah[] PROGMEM = "SAMSUNGAH";
+static const char proto_irmp16[] PROGMEM = "IRMP16";
+static const char proto_gree[] PROGMEM = "GREE";
+static const char proto_rcii[] PROGMEM = "RCII";
+static const char proto_metz[] PROGMEM = "METZ";
+static const char proto_onkyo[] PROGMEM = "ONKYO";
+
+static const char proto_radio1[] PROGMEM = "RADIO1";
+
+const char * const
+irmp_protocol_names[IRMP_N_PROTOCOLS + 1] PROGMEM =
+{
+ proto_unknown,
+ proto_sircs,
+ proto_nec,
+ proto_samsung,
+ proto_matsushita,
+ proto_kaseikyo,
+ proto_recs80,
+ proto_rc5,
+ proto_denon,
+ proto_rc6,
+ proto_samsung32,
+ proto_apple,
+ proto_recs80ext,
+ proto_nubert,
+ proto_bang_olufsen,
+ proto_grundig,
+ proto_nokia,
+ proto_siemens,
+ proto_fdc,
+ proto_rccar,
+ proto_jvc,
+ proto_rc6a,
+ proto_nikon,
+ proto_ruwido,
+ proto_ir60,
+ proto_kathrein,
+ proto_netbox,
+ proto_nec16,
+ proto_nec42,
+ proto_lego,
+ proto_thomson,
+ proto_bose,
+ proto_a1tvbox,
+ proto_ortek,
+ proto_telefunken,
+ proto_roomba,
+ proto_rcmm32,
+ proto_rcmm24,
+ proto_rcmm12,
+ proto_speaker,
+ proto_lgair,
+ proto_samsung48,
+ proto_merlin,
+ proto_pentax,
+ proto_fan,
+ proto_s100,
+ proto_acp24,
+ proto_technics,
+ proto_panasonic,
+ proto_mitsu_heavy,
+ proto_vincent,
+ proto_samsungah,
+ proto_irmp16,
+ proto_gree,
+ proto_rcii,
+ proto_metz,
+ proto_onkyo,
+
+ proto_radio1
+};
+
+#endif
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Logging
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#if IRMP_LOGGING == 1 // logging via UART
+
+#if defined(ARM_STM32F4XX)
+# define STM32_GPIO_CLOCK RCC_AHB1Periph_GPIOA // UART2 on PA2
+# define STM32_UART_CLOCK RCC_APB1Periph_USART2
+# define STM32_GPIO_PORT GPIOA
+# define STM32_GPIO_PIN GPIO_Pin_2
+# define STM32_GPIO_SOURCE GPIO_PinSource2
+# define STM32_UART_AF GPIO_AF_USART2
+# define STM32_UART_COM USART2
+# define STM32_UART_BAUD 115200 // 115200 Baud
+# include "stm32f4xx_usart.h"
+#elif defined(ARM_STM32F10X)
+# define STM32_UART_COM USART3 // UART3 on PB10
+#elif defined(ARDUINO) // Arduino Serial implementation
+# if defined(USB_SERIAL)
+# include "usb_serial.h"
+# else
+# error USB_SERIAL not defined in ARDUINO Environment
+# endif
+#elif defined(_CHIBIOS_HAL_) // ChibiOS HAL
+# if IRMP_EXT_LOGGING == 1
+# error IRMP_EXT_LOGGING not implemented for ChibiOS HAL, use regular logging instead
+# endif
+#else
+# if IRMP_EXT_LOGGING == 1 // use external logging
+# include "irmpextlog.h"
+# else // normal UART log (IRMP_EXT_LOGGING == 0)
+# define BAUD 9600L
+# ifndef UNIX_OR_WINDOWS
+# include <util/setbaud.h>
+# endif
+
+#ifdef UBRR0H
+
+#define UART0_UBRRH UBRR0H
+#define UART0_UBRRL UBRR0L
+#define UART0_UCSRA UCSR0A
+#define UART0_UCSRB UCSR0B
+#define UART0_UCSRC UCSR0C
+#define UART0_UDRE_BIT_VALUE (1<<UDRE0)
+#define UART0_UCSZ1_BIT_VALUE (1<<UCSZ01)
+#define UART0_UCSZ0_BIT_VALUE (1<<UCSZ00)
+#ifdef URSEL0
+#define UART0_URSEL_BIT_VALUE (1<<URSEL0)
+#else
+#define UART0_URSEL_BIT_VALUE (0)
+#endif
+#define UART0_TXEN_BIT_VALUE (1<<TXEN0)
+#define UART0_UDR UDR0
+#define UART0_U2X U2X0
+
+#else
+
+#define UART0_UBRRH UBRRH
+#define UART0_UBRRL UBRRL
+#define UART0_UCSRA UCSRA
+#define UART0_UCSRB UCSRB
+#define UART0_UCSRC UCSRC
+#define UART0_UDRE_BIT_VALUE (1<<UDRE)
+#define UART0_UCSZ1_BIT_VALUE (1<<UCSZ1)
+#define UART0_UCSZ0_BIT_VALUE (1<<UCSZ0)
+#ifdef URSEL
+#define UART0_URSEL_BIT_VALUE (1<<URSEL)
+#else
+#define UART0_URSEL_BIT_VALUE (0)
+#endif
+#define UART0_TXEN_BIT_VALUE (1<<TXEN)
+#define UART0_UDR UDR
+#define UART0_U2X U2X
+
+#endif //UBRR0H
+#endif //IRMP_EXT_LOGGING
+#endif //ARM_STM32F4XX
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Initialize UART
+ * @details Initializes UART
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+void
+irmp_uart_init (void)
+{
+#ifndef UNIX_OR_WINDOWS
+#if defined(ARM_STM32F4XX)
+ GPIO_InitTypeDef GPIO_InitStructure;
+ USART_InitTypeDef USART_InitStructure;
+
+ // Clock enable vom TX Pin
+ RCC_AHB1PeriphClockCmd(STM32_GPIO_CLOCK, ENABLE);
+
+ // Clock enable der UART
+ RCC_APB1PeriphClockCmd(STM32_UART_CLOCK, ENABLE);
+
+ // UART Alternative-Funktion mit dem IO-Pin verbinden
+ GPIO_PinAFConfig(STM32_GPIO_PORT,STM32_GPIO_SOURCE,STM32_UART_AF);
+
+ // UART als Alternative-Funktion mit PushPull
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
+ GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
+ GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
+
+ // TX-Pin
+ GPIO_InitStructure.GPIO_Pin = STM32_GPIO_PIN;
+ GPIO_Init(STM32_GPIO_PORT, &GPIO_InitStructure);
+
+ // Oversampling
+ USART_OverSampling8Cmd(STM32_UART_COM, ENABLE);
+
+ // init baud rate, 8 data bits, 1 stop bit, no parity, no RTS+CTS
+ USART_InitStructure.USART_BaudRate = STM32_UART_BAUD;
+ USART_InitStructure.USART_WordLength = USART_WordLength_8b;
+ USART_InitStructure.USART_StopBits = USART_StopBits_1;
+ USART_InitStructure.USART_Parity = USART_Parity_No;
+ USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+ USART_InitStructure.USART_Mode = USART_Mode_Tx;
+ USART_Init(STM32_UART_COM, &USART_InitStructure);
+
+ // UART enable
+ USART_Cmd(STM32_UART_COM, ENABLE);
+
+#elif defined(ARM_STM32F10X)
+ GPIO_InitTypeDef GPIO_InitStructure;
+ USART_InitTypeDef USART_InitStructure;
+
+ // Clock enable vom TX Pin
+ RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); // UART3 an PB10
+
+ // Clock enable der UART
+ RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE);
+
+ // UART als Alternative-Funktion mit PushPull
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+
+ // TX-Pin
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
+ GPIO_Init(GPIOB, &GPIO_InitStructure);
+
+ // Oversampling
+ USART_OverSampling8Cmd(STM32_UART_COM, ENABLE);
+
+ // init baud rate, 8 data bits, 1 stop bit, no parity, no RTS+CTS
+ USART_InitStructure.USART_BaudRate = 115200;
+ USART_InitStructure.USART_WordLength = USART_WordLength_8b;
+ USART_InitStructure.USART_StopBits = USART_StopBits_1;
+ USART_InitStructure.USART_Parity = USART_Parity_No;
+ USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+ USART_InitStructure.USART_Mode = USART_Mode_Tx;
+ USART_Init(STM32_UART_COM, &USART_InitStructure);
+
+ // UART enable
+ USART_Cmd(STM32_UART_COM, ENABLE);
+
+#elif defined(ARDUINO)
+ // we use the Arduino Serial Imlementation
+ // you have to call Serial.begin(SER_BAUD); in Arduino setup() function
+
+#elif defined (__AVR_XMEGA__)
+
+ PMIC.CTRL |= PMIC_HILVLEN_bm;
+
+ USARTC1.BAUDCTRLB = 0;
+ USARTC1.BAUDCTRLA = F_CPU / 153600 - 1;
+ USARTC1.CTRLA = USART_RXCINTLVL_HI_gc; // high INT level (receive)
+ USARTC1.CTRLB = USART_TXEN_bm | USART_RXEN_bm; // activated RX and TX
+ USARTC1.CTRLC = USART_CHSIZE_8BIT_gc; // 8 Bit
+ PORTC.DIR |= (1<<7); // TXD is output
+ PORTC.DIR &= ~(1<<6);
+
+#elif defined (_CHIBIOS_HAL_)
+ // we use the SD interface for logging, no need to init that here
+
+#else
+
+#if (IRMP_EXT_LOGGING == 0) // use UART
+ UART0_UBRRH = UBRRH_VALUE; // set baud rate
+ UART0_UBRRL = UBRRL_VALUE;
+
+#if USE_2X
+ UART0_UCSRA |= (1<<UART0_U2X);
+#else
+ UART0_UCSRA &= ~(1<<UART0_U2X);
+#endif
+
+ UART0_UCSRC = UART0_UCSZ1_BIT_VALUE | UART0_UCSZ0_BIT_VALUE | UART0_URSEL_BIT_VALUE;
+ UART0_UCSRB |= UART0_TXEN_BIT_VALUE; // enable UART TX
+#else // other log method
+ initextlog();
+#endif //IRMP_EXT_LOGGING
+#endif //ARM_STM32F4XX
+#endif // UNIX_OR_WINDOWS
+}
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Send character
+ * @details Sends character
+ * @param ch character to be transmitted
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+void
+irmp_uart_putc (unsigned char ch)
+{
+#ifndef UNIX_OR_WINDOWS
+#if defined(ARM_STM32F4XX) || defined(ARM_STM32F10X)
+ // warten bis altes Byte gesendet wurde
+ while (USART_GetFlagStatus(STM32_UART_COM, USART_FLAG_TXE) == RESET)
+ {
+ ;
+ }
+
+ USART_SendData(STM32_UART_COM, ch);
+
+ if (ch == '\n')
+ {
+ while (USART_GetFlagStatus(STM32_UART_COM, USART_FLAG_TXE) == RESET);
+ USART_SendData(STM32_UART_COM, '\r');
+ }
+
+#elif defined(ARDUINO)
+ // we use the Arduino Serial Imlementation
+ usb_serial_putchar(ch);
+
+#elif defined(_CHIBIOS_HAL_)
+ // use the SD interface from HAL, log to IRMP_LOGGING_SD which is defined in irmpconfig.h
+ sdWriteI(&IRMP_LOGGING_SD,&ch,1); // we are called from interrupt context, so use the ...I version of the function
+
+#else
+#if (IRMP_EXT_LOGGING == 0)
+
+# if defined (__AVR_XMEGA__)
+ while (!(USARTC1.STATUS & USART_DREIF_bm))
+ {
+ ;
+ }
+
+ USARTC1.DATA = ch;
+
+# else // AVR_MEGA
+ while (!(UART0_UCSRA & UART0_UDRE_BIT_VALUE))
+ {
+ ;
+ }
+
+ UART0_UDR = ch;
+
+# endif // __AVR_XMEGA__
+
+#else
+
+ sendextlog(ch); // use external log
+
+#endif // IRMP_EXT_LOGGING
+#endif // ARM_STM32F4XX
+#else
+ fputc (ch, stderr);
+#endif // UNIX_OR_WINDOWS
+}
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Log IR signal
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+
+#define STARTCYCLES 2 // min count of zeros before start of logging
+#define ENDBITS 1000 // number of sequenced highbits to detect end
+#define DATALEN 700 // log buffer size
+
+static void
+irmp_log (uint_fast8_t val)
+{
+ static uint8_t buf[DATALEN]; // logging buffer
+ static uint_fast16_t buf_idx; // index
+ static uint_fast8_t startcycles; // current number of start-zeros
+ static uint_fast16_t cnt; // counts sequenced highbits - to detect end
+ static uint_fast8_t last_val = 1;
+
+ if (! val && (startcycles < STARTCYCLES) && !buf_idx) // prevent that single random zeros init logging
+ {
+ startcycles++;
+ }
+ else
+ {
+ startcycles = 0;
+
+ if (! val || buf_idx != 0) // start or continue logging on "0", "1" cannot init logging
+ {
+ if (last_val == val)
+ {
+ cnt++;
+
+ if (val && cnt > ENDBITS) // if high received then look at log-stop condition
+ { // if stop condition is true, output on uart
+ uint_fast8_t i8;
+ uint_fast16_t i;
+ uint_fast16_t j;
+ uint_fast8_t v = '1';
+ uint_fast16_t d;
+
+ for (i8 = 0; i8 < STARTCYCLES; i8++)
+ {
+ irmp_uart_putc ('0'); // the ignored starting zeros
+ }
+
+ for (i = 0; i < buf_idx; i++)
+ {
+ d = buf[i];
+
+ if (d == 0xff)
+ {
+ i++;
+ d = buf[i];
+ i++;
+ d |= ((uint_fast16_t) buf[i] << 8);
+ }
+
+ for (j = 0; j < d; j++)
+ {
+ irmp_uart_putc (v);
+ }
+
+ v = (v == '1') ? '0' : '1';
+ }
+
+ for (i8 = 0; i8 < 20; i8++)
+ {
+ irmp_uart_putc ('1');
+ }
+
+ irmp_uart_putc ('\n');
+ buf_idx = 0;
+ last_val = 1;
+ cnt = 0;
+ }
+ }
+ else if (buf_idx < DATALEN - 3)
+ {
+ if (cnt >= 0xff)
+ {
+ buf[buf_idx++] = 0xff;
+ buf[buf_idx++] = (cnt & 0xff);
+ buf[buf_idx] = (cnt >> 8);
+ }
+ else
+ {
+ buf[buf_idx] = cnt;
+ }
+
+ buf_idx++;
+ cnt = 1;
+ last_val = val;
+ }
+ }
+ }
+}
+
+#else
+#define irmp_log(val)
+#endif //IRMP_LOGGING
+
+typedef struct
+{
+ uint_fast8_t protocol; // ir protocol
+ uint_fast8_t pulse_1_len_min; // minimum length of pulse with bit value 1
+ uint_fast8_t pulse_1_len_max; // maximum length of pulse with bit value 1
+ uint_fast8_t pause_1_len_min; // minimum length of pause with bit value 1
+ uint_fast8_t pause_1_len_max; // maximum length of pause with bit value 1
+ uint_fast8_t pulse_0_len_min; // minimum length of pulse with bit value 0
+ uint_fast8_t pulse_0_len_max; // maximum length of pulse with bit value 0
+ uint_fast8_t pause_0_len_min; // minimum length of pause with bit value 0
+ uint_fast8_t pause_0_len_max; // maximum length of pause with bit value 0
+ uint_fast8_t address_offset; // address offset
+ uint_fast8_t address_end; // end of address
+ uint_fast8_t command_offset; // command offset
+ uint_fast8_t command_end; // end of command
+ uint_fast8_t complete_len; // complete length of frame
+ uint_fast8_t stop_bit; // flag: frame has stop bit
+ uint_fast8_t lsb_first; // flag: LSB first
+ uint_fast8_t flags; // some flags
+} IRMP_PARAMETER;
+
+#if IRMP_SUPPORT_SIRCS_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER sircs_param =
+{
+ IRMP_SIRCS_PROTOCOL, // protocol: ir protocol
+ SIRCS_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ SIRCS_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ SIRCS_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ SIRCS_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ SIRCS_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ SIRCS_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ SIRCS_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ SIRCS_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ SIRCS_ADDRESS_OFFSET, // address_offset: address offset
+ SIRCS_ADDRESS_OFFSET + SIRCS_ADDRESS_LEN, // address_end: end of address
+ SIRCS_COMMAND_OFFSET, // command_offset: command offset
+ SIRCS_COMMAND_OFFSET + SIRCS_COMMAND_LEN, // command_end: end of command
+ SIRCS_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ SIRCS_STOP_BIT, // stop_bit: flag: frame has stop bit
+ SIRCS_LSB, // lsb_first: flag: LSB first
+ SIRCS_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_NEC_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER nec_param =
+{
+ IRMP_NEC_PROTOCOL, // protocol: ir protocol
+ NEC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ NEC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ NEC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ NEC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ NEC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ NEC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ NEC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ NEC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ NEC_ADDRESS_OFFSET, // address_offset: address offset
+ NEC_ADDRESS_OFFSET + NEC_ADDRESS_LEN, // address_end: end of address
+ NEC_COMMAND_OFFSET, // command_offset: command offset
+ NEC_COMMAND_OFFSET + NEC_COMMAND_LEN, // command_end: end of command
+ NEC_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ NEC_STOP_BIT, // stop_bit: flag: frame has stop bit
+ NEC_LSB, // lsb_first: flag: LSB first
+ NEC_FLAGS // flags: some flags
+};
+
+static const PROGMEM IRMP_PARAMETER nec_rep_param =
+{
+ IRMP_NEC_PROTOCOL, // protocol: ir protocol
+ NEC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ NEC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ NEC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ NEC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ NEC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ NEC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ NEC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ NEC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ 0, // address_offset: address offset
+ 0, // address_end: end of address
+ 0, // command_offset: command offset
+ 0, // command_end: end of command
+ 0, // complete_len: complete length of frame
+ NEC_STOP_BIT, // stop_bit: flag: frame has stop bit
+ NEC_LSB, // lsb_first: flag: LSB first
+ NEC_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_NEC42_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER nec42_param =
+{
+ IRMP_NEC42_PROTOCOL, // protocol: ir protocol
+ NEC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ NEC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ NEC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ NEC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ NEC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ NEC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ NEC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ NEC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ NEC42_ADDRESS_OFFSET, // address_offset: address offset
+ NEC42_ADDRESS_OFFSET + NEC42_ADDRESS_LEN, // address_end: end of address
+ NEC42_COMMAND_OFFSET, // command_offset: command offset
+ NEC42_COMMAND_OFFSET + NEC42_COMMAND_LEN, // command_end: end of command
+ NEC42_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ NEC_STOP_BIT, // stop_bit: flag: frame has stop bit
+ NEC_LSB, // lsb_first: flag: LSB first
+ NEC_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER lgair_param =
+{
+ IRMP_LGAIR_PROTOCOL, // protocol: ir protocol
+ NEC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ NEC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ NEC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ NEC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ NEC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ NEC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ NEC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ NEC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ LGAIR_ADDRESS_OFFSET, // address_offset: address offset
+ LGAIR_ADDRESS_OFFSET + LGAIR_ADDRESS_LEN, // address_end: end of address
+ LGAIR_COMMAND_OFFSET, // command_offset: command offset
+ LGAIR_COMMAND_OFFSET + LGAIR_COMMAND_LEN, // command_end: end of command
+ LGAIR_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ NEC_STOP_BIT, // stop_bit: flag: frame has stop bit
+ NEC_LSB, // lsb_first: flag: LSB first
+ NEC_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER samsung_param =
+{
+ IRMP_SAMSUNG_PROTOCOL, // protocol: ir protocol
+ SAMSUNG_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ SAMSUNG_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ SAMSUNG_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ SAMSUNG_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ SAMSUNG_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ SAMSUNG_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ SAMSUNG_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ SAMSUNG_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ SAMSUNG_ADDRESS_OFFSET, // address_offset: address offset
+ SAMSUNG_ADDRESS_OFFSET + SAMSUNG_ADDRESS_LEN, // address_end: end of address
+ SAMSUNG_COMMAND_OFFSET, // command_offset: command offset
+ SAMSUNG_COMMAND_OFFSET + SAMSUNG_COMMAND_LEN, // command_end: end of command
+ SAMSUNG_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ SAMSUNG_STOP_BIT, // stop_bit: flag: frame has stop bit
+ SAMSUNG_LSB, // lsb_first: flag: LSB first
+ SAMSUNG_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_SAMSUNGAH_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER samsungah_param =
+{
+ IRMP_SAMSUNGAH_PROTOCOL, // protocol: ir protocol
+ SAMSUNGAH_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ SAMSUNGAH_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ SAMSUNGAH_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ SAMSUNGAH_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ SAMSUNGAH_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ SAMSUNGAH_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ SAMSUNGAH_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ SAMSUNGAH_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ SAMSUNGAH_ADDRESS_OFFSET, // address_offset: address offset
+ SAMSUNGAH_ADDRESS_OFFSET + SAMSUNGAH_ADDRESS_LEN, // address_end: end of address
+ SAMSUNGAH_COMMAND_OFFSET, // command_offset: command offset
+ SAMSUNGAH_COMMAND_OFFSET + SAMSUNGAH_COMMAND_LEN, // command_end: end of command
+ SAMSUNGAH_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ SAMSUNGAH_STOP_BIT, // stop_bit: flag: frame has stop bit
+ SAMSUNGAH_LSB, // lsb_first: flag: LSB first
+ SAMSUNGAH_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_TELEFUNKEN_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER telefunken_param =
+{
+ IRMP_TELEFUNKEN_PROTOCOL, // protocol: ir protocol
+ TELEFUNKEN_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ TELEFUNKEN_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ TELEFUNKEN_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ TELEFUNKEN_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ TELEFUNKEN_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ TELEFUNKEN_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ TELEFUNKEN_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ TELEFUNKEN_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ TELEFUNKEN_ADDRESS_OFFSET, // address_offset: address offset
+ TELEFUNKEN_ADDRESS_OFFSET + TELEFUNKEN_ADDRESS_LEN, // address_end: end of address
+ TELEFUNKEN_COMMAND_OFFSET, // command_offset: command offset
+ TELEFUNKEN_COMMAND_OFFSET + TELEFUNKEN_COMMAND_LEN, // command_end: end of command
+ TELEFUNKEN_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ TELEFUNKEN_STOP_BIT, // stop_bit: flag: frame has stop bit
+ TELEFUNKEN_LSB, // lsb_first: flag: LSB first
+ TELEFUNKEN_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_MATSUSHITA_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER matsushita_param =
+{
+ IRMP_MATSUSHITA_PROTOCOL, // protocol: ir protocol
+ MATSUSHITA_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ MATSUSHITA_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ MATSUSHITA_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ MATSUSHITA_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ MATSUSHITA_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ MATSUSHITA_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ MATSUSHITA_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ MATSUSHITA_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ MATSUSHITA_ADDRESS_OFFSET, // address_offset: address offset
+ MATSUSHITA_ADDRESS_OFFSET + MATSUSHITA_ADDRESS_LEN, // address_end: end of address
+ MATSUSHITA_COMMAND_OFFSET, // command_offset: command offset
+ MATSUSHITA_COMMAND_OFFSET + MATSUSHITA_COMMAND_LEN, // command_end: end of command
+ MATSUSHITA_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ MATSUSHITA_STOP_BIT, // stop_bit: flag: frame has stop bit
+ MATSUSHITA_LSB, // lsb_first: flag: LSB first
+ MATSUSHITA_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER kaseikyo_param =
+{
+ IRMP_KASEIKYO_PROTOCOL, // protocol: ir protocol
+ KASEIKYO_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ KASEIKYO_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ KASEIKYO_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ KASEIKYO_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ KASEIKYO_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ KASEIKYO_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ KASEIKYO_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ KASEIKYO_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ KASEIKYO_ADDRESS_OFFSET, // address_offset: address offset
+ KASEIKYO_ADDRESS_OFFSET + KASEIKYO_ADDRESS_LEN, // address_end: end of address
+ KASEIKYO_COMMAND_OFFSET, // command_offset: command offset
+ KASEIKYO_COMMAND_OFFSET + KASEIKYO_COMMAND_LEN, // command_end: end of command
+ KASEIKYO_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ KASEIKYO_STOP_BIT, // stop_bit: flag: frame has stop bit
+ KASEIKYO_LSB, // lsb_first: flag: LSB first
+ KASEIKYO_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_PANASONIC_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER panasonic_param =
+{
+ IRMP_PANASONIC_PROTOCOL, // protocol: ir protocol
+ PANASONIC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ PANASONIC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ PANASONIC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ PANASONIC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ PANASONIC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ PANASONIC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ PANASONIC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ PANASONIC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ PANASONIC_ADDRESS_OFFSET, // address_offset: address offset
+ PANASONIC_ADDRESS_OFFSET + PANASONIC_ADDRESS_LEN, // address_end: end of address
+ PANASONIC_COMMAND_OFFSET, // command_offset: command offset
+ PANASONIC_COMMAND_OFFSET + PANASONIC_COMMAND_LEN, // command_end: end of command
+ PANASONIC_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ PANASONIC_STOP_BIT, // stop_bit: flag: frame has stop bit
+ PANASONIC_LSB, // lsb_first: flag: LSB first
+ PANASONIC_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER mitsu_heavy_param =
+{
+ IRMP_MITSU_HEAVY_PROTOCOL, // protocol: ir protocol
+ MITSU_HEAVY_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ MITSU_HEAVY_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ MITSU_HEAVY_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ MITSU_HEAVY_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ MITSU_HEAVY_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ MITSU_HEAVY_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ MITSU_HEAVY_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ MITSU_HEAVY_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ MITSU_HEAVY_ADDRESS_OFFSET, // address_offset: address offset
+ MITSU_HEAVY_ADDRESS_OFFSET + MITSU_HEAVY_ADDRESS_LEN, // address_end: end of address
+ MITSU_HEAVY_COMMAND_OFFSET, // command_offset: command offset
+ MITSU_HEAVY_COMMAND_OFFSET + MITSU_HEAVY_COMMAND_LEN, // command_end: end of command
+ MITSU_HEAVY_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ MITSU_HEAVY_STOP_BIT, // stop_bit: flag: frame has stop bit
+ MITSU_HEAVY_LSB, // lsb_first: flag: LSB first
+ MITSU_HEAVY_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_VINCENT_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER vincent_param =
+{
+ IRMP_VINCENT_PROTOCOL, // protocol: ir protocol
+ VINCENT_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ VINCENT_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ VINCENT_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ VINCENT_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ VINCENT_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ VINCENT_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ VINCENT_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ VINCENT_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ VINCENT_ADDRESS_OFFSET, // address_offset: address offset
+ VINCENT_ADDRESS_OFFSET + VINCENT_ADDRESS_LEN, // address_end: end of address
+ VINCENT_COMMAND_OFFSET, // command_offset: command offset
+ VINCENT_COMMAND_OFFSET + VINCENT_COMMAND_LEN, // command_end: end of command
+ VINCENT_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ VINCENT_STOP_BIT, // stop_bit: flag: frame has stop bit
+ VINCENT_LSB, // lsb_first: flag: LSB first
+ VINCENT_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_RECS80_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER recs80_param =
+{
+ IRMP_RECS80_PROTOCOL, // protocol: ir protocol
+ RECS80_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ RECS80_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ RECS80_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ RECS80_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ RECS80_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ RECS80_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ RECS80_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ RECS80_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ RECS80_ADDRESS_OFFSET, // address_offset: address offset
+ RECS80_ADDRESS_OFFSET + RECS80_ADDRESS_LEN, // address_end: end of address
+ RECS80_COMMAND_OFFSET, // command_offset: command offset
+ RECS80_COMMAND_OFFSET + RECS80_COMMAND_LEN, // command_end: end of command
+ RECS80_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ RECS80_STOP_BIT, // stop_bit: flag: frame has stop bit
+ RECS80_LSB, // lsb_first: flag: LSB first
+ RECS80_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER rc5_param =
+{
+ IRMP_RC5_PROTOCOL, // protocol: ir protocol
+ RC5_BIT_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
+ RC5_BIT_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
+ RC5_BIT_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
+ RC5_BIT_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
+ 0, // pulse_0_len_min: here: not used
+ 0, // pulse_0_len_max: here: not used
+ 0, // pause_0_len_min: here: not used
+ 0, // pause_0_len_max: here: not used
+ RC5_ADDRESS_OFFSET, // address_offset: address offset
+ RC5_ADDRESS_OFFSET + RC5_ADDRESS_LEN, // address_end: end of address
+ RC5_COMMAND_OFFSET, // command_offset: command offset
+ RC5_COMMAND_OFFSET + RC5_COMMAND_LEN, // command_end: end of command
+ RC5_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ RC5_STOP_BIT, // stop_bit: flag: frame has stop bit
+ RC5_LSB, // lsb_first: flag: LSB first
+ RC5_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_RCII_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER rcii_param =
+{
+ IRMP_RCII_PROTOCOL, // protocol: ir protocol
+ RCII_BIT_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
+ RCII_BIT_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
+ RCII_BIT_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
+ RCII_BIT_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
+ RCII_BIT_LEN_MIN, // pulse_0_len_min: here: not used
+ RCII_BIT_LEN_MAX, // pulse_0_len_max: here: not used
+ RCII_BIT_LEN_MIN, // pause_0_len_min: here: not used
+ RCII_BIT_LEN_MAX, // pause_0_len_max: here: not used
+ RCII_ADDRESS_OFFSET, // address_offset: address offset
+ RCII_ADDRESS_OFFSET + RCII_ADDRESS_LEN, // address_end: end of address
+ RCII_COMMAND_OFFSET, // command_offset: command offset
+ RCII_COMMAND_OFFSET + RCII_COMMAND_LEN, // command_end: end of command
+ RCII_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ RCII_STOP_BIT, // stop_bit: flag: frame has stop bit
+ RCII_LSB, // lsb_first: flag: LSB first
+ RCII_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_S100_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER s100_param =
+{
+ IRMP_S100_PROTOCOL, // protocol: ir protocol
+ S100_BIT_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
+ S100_BIT_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
+ S100_BIT_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
+ S100_BIT_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
+ 0, // pulse_0_len_min: here: not used
+ 0, // pulse_0_len_max: here: not used
+ 0, // pause_0_len_min: here: not used
+ 0, // pause_0_len_max: here: not used
+ S100_ADDRESS_OFFSET, // address_offset: address offset
+ S100_ADDRESS_OFFSET + S100_ADDRESS_LEN, // address_end: end of address
+ S100_COMMAND_OFFSET, // command_offset: command offset
+ S100_COMMAND_OFFSET + S100_COMMAND_LEN, // command_end: end of command
+ S100_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ S100_STOP_BIT, // stop_bit: flag: frame has stop bit
+ S100_LSB, // lsb_first: flag: LSB first
+ S100_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_DENON_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER denon_param =
+{
+ IRMP_DENON_PROTOCOL, // protocol: ir protocol
+ DENON_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ DENON_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ DENON_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ DENON_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ DENON_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ DENON_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ DENON_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ DENON_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ DENON_ADDRESS_OFFSET, // address_offset: address offset
+ DENON_ADDRESS_OFFSET + DENON_ADDRESS_LEN, // address_end: end of address
+ DENON_COMMAND_OFFSET, // command_offset: command offset
+ DENON_COMMAND_OFFSET + DENON_COMMAND_LEN, // command_end: end of command
+ DENON_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ DENON_STOP_BIT, // stop_bit: flag: frame has stop bit
+ DENON_LSB, // lsb_first: flag: LSB first
+ DENON_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_RC6_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER rc6_param =
+{
+ IRMP_RC6_PROTOCOL, // protocol: ir protocol
+
+ RC6_BIT_PULSE_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
+ RC6_BIT_PULSE_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
+ RC6_BIT_PAUSE_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
+ RC6_BIT_PAUSE_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
+ 0, // pulse_0_len_min: here: not used
+ 0, // pulse_0_len_max: here: not used
+ 0, // pause_0_len_min: here: not used
+ 0, // pause_0_len_max: here: not used
+ RC6_ADDRESS_OFFSET, // address_offset: address offset
+ RC6_ADDRESS_OFFSET + RC6_ADDRESS_LEN, // address_end: end of address
+ RC6_COMMAND_OFFSET, // command_offset: command offset
+ RC6_COMMAND_OFFSET + RC6_COMMAND_LEN, // command_end: end of command
+ RC6_COMPLETE_DATA_LEN_SHORT, // complete_len: complete length of frame
+ RC6_STOP_BIT, // stop_bit: flag: frame has stop bit
+ RC6_LSB, // lsb_first: flag: LSB first
+ RC6_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER recs80ext_param =
+{
+ IRMP_RECS80EXT_PROTOCOL, // protocol: ir protocol
+ RECS80EXT_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ RECS80EXT_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ RECS80EXT_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ RECS80EXT_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ RECS80EXT_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ RECS80EXT_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ RECS80EXT_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ RECS80EXT_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ RECS80EXT_ADDRESS_OFFSET, // address_offset: address offset
+ RECS80EXT_ADDRESS_OFFSET + RECS80EXT_ADDRESS_LEN, // address_end: end of address
+ RECS80EXT_COMMAND_OFFSET, // command_offset: command offset
+ RECS80EXT_COMMAND_OFFSET + RECS80EXT_COMMAND_LEN, // command_end: end of command
+ RECS80EXT_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ RECS80EXT_STOP_BIT, // stop_bit: flag: frame has stop bit
+ RECS80EXT_LSB, // lsb_first: flag: LSB first
+ RECS80EXT_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_NUBERT_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER nubert_param =
+{
+ IRMP_NUBERT_PROTOCOL, // protocol: ir protocol
+ NUBERT_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ NUBERT_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ NUBERT_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ NUBERT_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ NUBERT_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ NUBERT_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ NUBERT_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ NUBERT_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ NUBERT_ADDRESS_OFFSET, // address_offset: address offset
+ NUBERT_ADDRESS_OFFSET + NUBERT_ADDRESS_LEN, // address_end: end of address
+ NUBERT_COMMAND_OFFSET, // command_offset: command offset
+ NUBERT_COMMAND_OFFSET + NUBERT_COMMAND_LEN, // command_end: end of command
+ NUBERT_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ NUBERT_STOP_BIT, // stop_bit: flag: frame has stop bit
+ NUBERT_LSB, // lsb_first: flag: LSB first
+ NUBERT_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_FAN_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER fan_param =
+{
+ IRMP_FAN_PROTOCOL, // protocol: ir protocol
+ FAN_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ FAN_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ FAN_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ FAN_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ FAN_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ FAN_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ FAN_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ FAN_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ FAN_ADDRESS_OFFSET, // address_offset: address offset
+ FAN_ADDRESS_OFFSET + FAN_ADDRESS_LEN, // address_end: end of address
+ FAN_COMMAND_OFFSET, // command_offset: command offset
+ FAN_COMMAND_OFFSET + FAN_COMMAND_LEN, // command_end: end of command
+ FAN_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ FAN_STOP_BIT, // stop_bit: flag: frame has NO stop bit
+ FAN_LSB, // lsb_first: flag: LSB first
+ FAN_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_SPEAKER_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER speaker_param =
+{
+ IRMP_SPEAKER_PROTOCOL, // protocol: ir protocol
+ SPEAKER_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ SPEAKER_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ SPEAKER_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ SPEAKER_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ SPEAKER_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ SPEAKER_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ SPEAKER_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ SPEAKER_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ SPEAKER_ADDRESS_OFFSET, // address_offset: address offset
+ SPEAKER_ADDRESS_OFFSET + SPEAKER_ADDRESS_LEN, // address_end: end of address
+ SPEAKER_COMMAND_OFFSET, // command_offset: command offset
+ SPEAKER_COMMAND_OFFSET + SPEAKER_COMMAND_LEN, // command_end: end of command
+ SPEAKER_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ SPEAKER_STOP_BIT, // stop_bit: flag: frame has stop bit
+ SPEAKER_LSB, // lsb_first: flag: LSB first
+ SPEAKER_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER bang_olufsen_param =
+{
+ IRMP_BANG_OLUFSEN_PROTOCOL, // protocol: ir protocol
+ BANG_OLUFSEN_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ BANG_OLUFSEN_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ BANG_OLUFSEN_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ BANG_OLUFSEN_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ BANG_OLUFSEN_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ BANG_OLUFSEN_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ BANG_OLUFSEN_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ BANG_OLUFSEN_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ BANG_OLUFSEN_ADDRESS_OFFSET, // address_offset: address offset
+ BANG_OLUFSEN_ADDRESS_OFFSET + BANG_OLUFSEN_ADDRESS_LEN, // address_end: end of address
+ BANG_OLUFSEN_COMMAND_OFFSET, // command_offset: command offset
+ BANG_OLUFSEN_COMMAND_OFFSET + BANG_OLUFSEN_COMMAND_LEN, // command_end: end of command
+ BANG_OLUFSEN_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ BANG_OLUFSEN_STOP_BIT, // stop_bit: flag: frame has stop bit
+ BANG_OLUFSEN_LSB, // lsb_first: flag: LSB first
+ BANG_OLUFSEN_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL == 1
+
+static uint_fast8_t first_bit;
+
+static const PROGMEM IRMP_PARAMETER grundig_param =
+{
+ IRMP_GRUNDIG_PROTOCOL, // protocol: ir protocol
+
+ GRUNDIG_NOKIA_IR60_BIT_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
+ GRUNDIG_NOKIA_IR60_BIT_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
+ GRUNDIG_NOKIA_IR60_BIT_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
+ GRUNDIG_NOKIA_IR60_BIT_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
+ 0, // pulse_0_len_min: here: not used
+ 0, // pulse_0_len_max: here: not used
+ 0, // pause_0_len_min: here: not used
+ 0, // pause_0_len_max: here: not used
+ GRUNDIG_ADDRESS_OFFSET, // address_offset: address offset
+ GRUNDIG_ADDRESS_OFFSET + GRUNDIG_ADDRESS_LEN, // address_end: end of address
+ GRUNDIG_COMMAND_OFFSET, // command_offset: command offset
+ GRUNDIG_COMMAND_OFFSET + GRUNDIG_COMMAND_LEN + 1, // command_end: end of command (USE 1 bit MORE to STORE NOKIA DATA!)
+ NOKIA_COMPLETE_DATA_LEN, // complete_len: complete length of frame, here: NOKIA instead of GRUNDIG!
+ GRUNDIG_NOKIA_IR60_STOP_BIT, // stop_bit: flag: frame has stop bit
+ GRUNDIG_NOKIA_IR60_LSB, // lsb_first: flag: LSB first
+ GRUNDIG_NOKIA_IR60_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER ruwido_param =
+{
+ IRMP_RUWIDO_PROTOCOL, // protocol: ir protocol
+ SIEMENS_OR_RUWIDO_BIT_PULSE_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
+ SIEMENS_OR_RUWIDO_BIT_PULSE_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
+ SIEMENS_OR_RUWIDO_BIT_PAUSE_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
+ SIEMENS_OR_RUWIDO_BIT_PAUSE_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
+ 0, // pulse_0_len_min: here: not used
+ 0, // pulse_0_len_max: here: not used
+ 0, // pause_0_len_min: here: not used
+ 0, // pause_0_len_max: here: not used
+ RUWIDO_ADDRESS_OFFSET, // address_offset: address offset
+ RUWIDO_ADDRESS_OFFSET + RUWIDO_ADDRESS_LEN, // address_end: end of address
+ RUWIDO_COMMAND_OFFSET, // command_offset: command offset
+ RUWIDO_COMMAND_OFFSET + RUWIDO_COMMAND_LEN, // command_end: end of command
+ SIEMENS_COMPLETE_DATA_LEN, // complete_len: complete length of frame, here: SIEMENS instead of RUWIDO!
+ SIEMENS_OR_RUWIDO_STOP_BIT, // stop_bit: flag: frame has stop bit
+ SIEMENS_OR_RUWIDO_LSB, // lsb_first: flag: LSB first
+ SIEMENS_OR_RUWIDO_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_FDC_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER fdc_param =
+{
+ IRMP_FDC_PROTOCOL, // protocol: ir protocol
+ FDC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ FDC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ FDC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ FDC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ FDC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ FDC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ FDC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ FDC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ FDC_ADDRESS_OFFSET, // address_offset: address offset
+ FDC_ADDRESS_OFFSET + FDC_ADDRESS_LEN, // address_end: end of address
+ FDC_COMMAND_OFFSET, // command_offset: command offset
+ FDC_COMMAND_OFFSET + FDC_COMMAND_LEN, // command_end: end of command
+ FDC_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ FDC_STOP_BIT, // stop_bit: flag: frame has stop bit
+ FDC_LSB, // lsb_first: flag: LSB first
+ FDC_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_RCCAR_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER rccar_param =
+{
+ IRMP_RCCAR_PROTOCOL, // protocol: ir protocol
+ RCCAR_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ RCCAR_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ RCCAR_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ RCCAR_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ RCCAR_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ RCCAR_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ RCCAR_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ RCCAR_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ RCCAR_ADDRESS_OFFSET, // address_offset: address offset
+ RCCAR_ADDRESS_OFFSET + RCCAR_ADDRESS_LEN, // address_end: end of address
+ RCCAR_COMMAND_OFFSET, // command_offset: command offset
+ RCCAR_COMMAND_OFFSET + RCCAR_COMMAND_LEN, // command_end: end of command
+ RCCAR_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ RCCAR_STOP_BIT, // stop_bit: flag: frame has stop bit
+ RCCAR_LSB, // lsb_first: flag: LSB first
+ RCCAR_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_NIKON_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER nikon_param =
+{
+ IRMP_NIKON_PROTOCOL, // protocol: ir protocol
+ NIKON_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ NIKON_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ NIKON_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ NIKON_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ NIKON_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ NIKON_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ NIKON_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ NIKON_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ NIKON_ADDRESS_OFFSET, // address_offset: address offset
+ NIKON_ADDRESS_OFFSET + NIKON_ADDRESS_LEN, // address_end: end of address
+ NIKON_COMMAND_OFFSET, // command_offset: command offset
+ NIKON_COMMAND_OFFSET + NIKON_COMMAND_LEN, // command_end: end of command
+ NIKON_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ NIKON_STOP_BIT, // stop_bit: flag: frame has stop bit
+ NIKON_LSB, // lsb_first: flag: LSB first
+ NIKON_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_KATHREIN_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER kathrein_param =
+{
+ IRMP_KATHREIN_PROTOCOL, // protocol: ir protocol
+ KATHREIN_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ KATHREIN_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ KATHREIN_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ KATHREIN_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ KATHREIN_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ KATHREIN_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ KATHREIN_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ KATHREIN_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ KATHREIN_ADDRESS_OFFSET, // address_offset: address offset
+ KATHREIN_ADDRESS_OFFSET + KATHREIN_ADDRESS_LEN, // address_end: end of address
+ KATHREIN_COMMAND_OFFSET, // command_offset: command offset
+ KATHREIN_COMMAND_OFFSET + KATHREIN_COMMAND_LEN, // command_end: end of command
+ KATHREIN_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ KATHREIN_STOP_BIT, // stop_bit: flag: frame has stop bit
+ KATHREIN_LSB, // lsb_first: flag: LSB first
+ KATHREIN_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_NETBOX_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER netbox_param =
+{
+ IRMP_NETBOX_PROTOCOL, // protocol: ir protocol
+ NETBOX_PULSE_LEN, // pulse_1_len_min: minimum length of pulse with bit value 1, here: exact value
+ NETBOX_PULSE_REST_LEN, // pulse_1_len_max: maximum length of pulse with bit value 1, here: rest value
+ NETBOX_PAUSE_LEN, // pause_1_len_min: minimum length of pause with bit value 1, here: exact value
+ NETBOX_PAUSE_REST_LEN, // pause_1_len_max: maximum length of pause with bit value 1, here: rest value
+ NETBOX_PULSE_LEN, // pulse_0_len_min: minimum length of pulse with bit value 0, here: exact value
+ NETBOX_PULSE_REST_LEN, // pulse_0_len_max: maximum length of pulse with bit value 0, here: rest value
+ NETBOX_PAUSE_LEN, // pause_0_len_min: minimum length of pause with bit value 0, here: exact value
+ NETBOX_PAUSE_REST_LEN, // pause_0_len_max: maximum length of pause with bit value 0, here: rest value
+ NETBOX_ADDRESS_OFFSET, // address_offset: address offset
+ NETBOX_ADDRESS_OFFSET + NETBOX_ADDRESS_LEN, // address_end: end of address
+ NETBOX_COMMAND_OFFSET, // command_offset: command offset
+ NETBOX_COMMAND_OFFSET + NETBOX_COMMAND_LEN, // command_end: end of command
+ NETBOX_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ NETBOX_STOP_BIT, // stop_bit: flag: frame has stop bit
+ NETBOX_LSB, // lsb_first: flag: LSB first
+ NETBOX_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_LEGO_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER lego_param =
+{
+ IRMP_LEGO_PROTOCOL, // protocol: ir protocol
+ LEGO_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ LEGO_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ LEGO_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ LEGO_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ LEGO_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ LEGO_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ LEGO_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ LEGO_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ LEGO_ADDRESS_OFFSET, // address_offset: address offset
+ LEGO_ADDRESS_OFFSET + LEGO_ADDRESS_LEN, // address_end: end of address
+ LEGO_COMMAND_OFFSET, // command_offset: command offset
+ LEGO_COMMAND_OFFSET + LEGO_COMMAND_LEN, // command_end: end of command
+ LEGO_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ LEGO_STOP_BIT, // stop_bit: flag: frame has stop bit
+ LEGO_LSB, // lsb_first: flag: LSB first
+ LEGO_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_IRMP16_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER irmp16_param =
+{
+ IRMP_IRMP16_PROTOCOL, // protocol: ir protocol
+ IRMP16_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ IRMP16_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ IRMP16_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ IRMP16_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ IRMP16_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ IRMP16_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ IRMP16_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ IRMP16_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ IRMP16_ADDRESS_OFFSET, // address_offset: address offset
+ IRMP16_ADDRESS_OFFSET + IRMP16_ADDRESS_LEN, // address_end: end of address
+ IRMP16_COMMAND_OFFSET, // command_offset: command offset
+ IRMP16_COMMAND_OFFSET + IRMP16_COMMAND_LEN, // command_end: end of command
+ IRMP16_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ IRMP16_STOP_BIT, // stop_bit: flag: frame has stop bit
+ IRMP16_LSB, // lsb_first: flag: LSB first
+ IRMP16_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_GREE_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER gree_param =
+{
+ IRMP_GREE_PROTOCOL, // protocol: ir protocol
+ GREE_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ GREE_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ GREE_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ GREE_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ GREE_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ GREE_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ GREE_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ GREE_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ GREE_ADDRESS_OFFSET, // address_offset: address offset
+ GREE_ADDRESS_OFFSET + GREE_ADDRESS_LEN, // address_end: end of address
+ GREE_COMMAND_OFFSET, // command_offset: command offset
+ GREE_COMMAND_OFFSET + GREE_COMMAND_LEN, // command_end: end of command
+ GREE_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ GREE_STOP_BIT, // stop_bit: flag: frame has stop bit
+ GREE_LSB, // lsb_first: flag: LSB first
+ GREE_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_THOMSON_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER thomson_param =
+{
+ IRMP_THOMSON_PROTOCOL, // protocol: ir protocol
+ THOMSON_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ THOMSON_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ THOMSON_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ THOMSON_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ THOMSON_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ THOMSON_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ THOMSON_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ THOMSON_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ THOMSON_ADDRESS_OFFSET, // address_offset: address offset
+ THOMSON_ADDRESS_OFFSET + THOMSON_ADDRESS_LEN, // address_end: end of address
+ THOMSON_COMMAND_OFFSET, // command_offset: command offset
+ THOMSON_COMMAND_OFFSET + THOMSON_COMMAND_LEN, // command_end: end of command
+ THOMSON_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ THOMSON_STOP_BIT, // stop_bit: flag: frame has stop bit
+ THOMSON_LSB, // lsb_first: flag: LSB first
+ THOMSON_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_BOSE_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER bose_param =
+{
+ IRMP_BOSE_PROTOCOL, // protocol: ir protocol
+ BOSE_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ BOSE_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ BOSE_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ BOSE_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ BOSE_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ BOSE_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ BOSE_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ BOSE_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ BOSE_ADDRESS_OFFSET, // address_offset: address offset
+ BOSE_ADDRESS_OFFSET + BOSE_ADDRESS_LEN, // address_end: end of address
+ BOSE_COMMAND_OFFSET, // command_offset: command offset
+ BOSE_COMMAND_OFFSET + BOSE_COMMAND_LEN, // command_end: end of command
+ BOSE_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ BOSE_STOP_BIT, // stop_bit: flag: frame has stop bit
+ BOSE_LSB, // lsb_first: flag: LSB first
+ BOSE_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_A1TVBOX_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER a1tvbox_param =
+{
+ IRMP_A1TVBOX_PROTOCOL, // protocol: ir protocol
+
+ A1TVBOX_BIT_PULSE_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
+ A1TVBOX_BIT_PULSE_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
+ A1TVBOX_BIT_PAUSE_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
+ A1TVBOX_BIT_PAUSE_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
+ 0, // pulse_0_len_min: here: not used
+ 0, // pulse_0_len_max: here: not used
+ 0, // pause_0_len_min: here: not used
+ 0, // pause_0_len_max: here: not used
+ A1TVBOX_ADDRESS_OFFSET, // address_offset: address offset
+ A1TVBOX_ADDRESS_OFFSET + A1TVBOX_ADDRESS_LEN, // address_end: end of address
+ A1TVBOX_COMMAND_OFFSET, // command_offset: command offset
+ A1TVBOX_COMMAND_OFFSET + A1TVBOX_COMMAND_LEN, // command_end: end of command
+ A1TVBOX_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ A1TVBOX_STOP_BIT, // stop_bit: flag: frame has stop bit
+ A1TVBOX_LSB, // lsb_first: flag: LSB first
+ A1TVBOX_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_MERLIN_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER merlin_param =
+{
+ IRMP_MERLIN_PROTOCOL, // protocol: ir protocol
+
+ MERLIN_BIT_PULSE_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
+ MERLIN_BIT_PULSE_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
+ MERLIN_BIT_PAUSE_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
+ MERLIN_BIT_PAUSE_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
+ 0, // pulse_0_len_min: here: not used
+ 0, // pulse_0_len_max: here: not used
+ 0, // pause_0_len_min: here: not used
+ 0, // pause_0_len_max: here: not used
+ MERLIN_ADDRESS_OFFSET, // address_offset: address offset
+ MERLIN_ADDRESS_OFFSET + MERLIN_ADDRESS_LEN, // address_end: end of address
+ MERLIN_COMMAND_OFFSET, // command_offset: command offset
+ MERLIN_COMMAND_OFFSET + MERLIN_COMMAND_LEN, // command_end: end of command
+ MERLIN_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ MERLIN_STOP_BIT, // stop_bit: flag: frame has stop bit
+ MERLIN_LSB, // lsb_first: flag: LSB first
+ MERLIN_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER ortek_param =
+{
+ IRMP_ORTEK_PROTOCOL, // protocol: ir protocol
+
+ ORTEK_BIT_PULSE_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
+ ORTEK_BIT_PULSE_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
+ ORTEK_BIT_PAUSE_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
+ ORTEK_BIT_PAUSE_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
+ 0, // pulse_0_len_min: here: not used
+ 0, // pulse_0_len_max: here: not used
+ 0, // pause_0_len_min: here: not used
+ 0, // pause_0_len_max: here: not used
+ ORTEK_ADDRESS_OFFSET, // address_offset: address offset
+ ORTEK_ADDRESS_OFFSET + ORTEK_ADDRESS_LEN, // address_end: end of address
+ ORTEK_COMMAND_OFFSET, // command_offset: command offset
+ ORTEK_COMMAND_OFFSET + ORTEK_COMMAND_LEN, // command_end: end of command
+ ORTEK_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ ORTEK_STOP_BIT, // stop_bit: flag: frame has stop bit
+ ORTEK_LSB, // lsb_first: flag: LSB first
+ ORTEK_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_ROOMBA_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER roomba_param =
+{
+ IRMP_ROOMBA_PROTOCOL, // protocol: ir protocol
+ ROOMBA_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ ROOMBA_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ ROOMBA_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ ROOMBA_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ ROOMBA_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ ROOMBA_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ ROOMBA_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ ROOMBA_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ ROOMBA_ADDRESS_OFFSET, // address_offset: address offset
+ ROOMBA_ADDRESS_OFFSET + ROOMBA_ADDRESS_LEN, // address_end: end of address
+ ROOMBA_COMMAND_OFFSET, // command_offset: command offset
+ ROOMBA_COMMAND_OFFSET + ROOMBA_COMMAND_LEN, // command_end: end of command
+ ROOMBA_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ ROOMBA_STOP_BIT, // stop_bit: flag: frame has stop bit
+ ROOMBA_LSB, // lsb_first: flag: LSB first
+ ROOMBA_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_RCMM_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER rcmm_param =
+{
+ IRMP_RCMM32_PROTOCOL, // protocol: ir protocol
+
+ RCMM32_BIT_PULSE_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
+ RCMM32_BIT_PULSE_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
+ 0, // pause_1_len_min: here: minimum length of short pause
+ 0, // pause_1_len_max: here: maximum length of short pause
+ RCMM32_BIT_PULSE_LEN_MIN, // pulse_0_len_min: here: not used
+ RCMM32_BIT_PULSE_LEN_MAX, // pulse_0_len_max: here: not used
+ 0, // pause_0_len_min: here: not used
+ 0, // pause_0_len_max: here: not used
+ RCMM32_ADDRESS_OFFSET, // address_offset: address offset
+ RCMM32_ADDRESS_OFFSET + RCMM32_ADDRESS_LEN, // address_end: end of address
+ RCMM32_COMMAND_OFFSET, // command_offset: command offset
+ RCMM32_COMMAND_OFFSET + RCMM32_COMMAND_LEN, // command_end: end of command
+ RCMM32_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ RCMM32_STOP_BIT, // stop_bit: flag: frame has stop bit
+ RCMM32_LSB, // lsb_first: flag: LSB first
+ RCMM32_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_PENTAX_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER pentax_param =
+{
+ IRMP_PENTAX_PROTOCOL, // protocol: ir protocol
+ PENTAX_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ PENTAX_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ PENTAX_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ PENTAX_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ PENTAX_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ PENTAX_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ PENTAX_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ PENTAX_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ PENTAX_ADDRESS_OFFSET, // address_offset: address offset
+ PENTAX_ADDRESS_OFFSET + PENTAX_ADDRESS_LEN, // address_end: end of address
+ PENTAX_COMMAND_OFFSET, // command_offset: command offset
+ PENTAX_COMMAND_OFFSET + PENTAX_COMMAND_LEN, // command_end: end of command
+ PENTAX_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ PENTAX_STOP_BIT, // stop_bit: flag: frame has stop bit
+ PENTAX_LSB, // lsb_first: flag: LSB first
+ PENTAX_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_ACP24_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER acp24_param =
+{
+ IRMP_ACP24_PROTOCOL, // protocol: ir protocol
+ ACP24_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ ACP24_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ ACP24_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ ACP24_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ ACP24_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ ACP24_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ ACP24_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ ACP24_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ ACP24_ADDRESS_OFFSET, // address_offset: address offset
+ ACP24_ADDRESS_OFFSET + ACP24_ADDRESS_LEN, // address_end: end of address
+ ACP24_COMMAND_OFFSET, // command_offset: command offset
+ ACP24_COMMAND_OFFSET + ACP24_COMMAND_LEN, // command_end: end of command
+ ACP24_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ ACP24_STOP_BIT, // stop_bit: flag: frame has stop bit
+ ACP24_LSB, // lsb_first: flag: LSB first
+ ACP24_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_METZ_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER metz_param =
+{
+ IRMP_METZ_PROTOCOL, // protocol: ir protocol
+ METZ_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ METZ_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ METZ_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ METZ_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ METZ_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ METZ_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ METZ_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ METZ_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ METZ_ADDRESS_OFFSET, // address_offset: address offset
+ METZ_ADDRESS_OFFSET + METZ_ADDRESS_LEN, // address_end: end of address
+ METZ_COMMAND_OFFSET, // command_offset: command offset
+ METZ_COMMAND_OFFSET + METZ_COMMAND_LEN, // command_end: end of command
+ METZ_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ METZ_STOP_BIT, // stop_bit: flag: frame has stop bit
+ METZ_LSB, // lsb_first: flag: LSB first
+ METZ_FLAGS // flags: some flags
+};
+
+#endif
+
+#if IRMP_SUPPORT_RADIO1_PROTOCOL == 1
+
+static const PROGMEM IRMP_PARAMETER radio1_param =
+{
+ IRMP_RADIO1_PROTOCOL, // protocol: ir protocol
+
+ RADIO1_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
+ RADIO1_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
+ RADIO1_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
+ RADIO1_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
+ RADIO1_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
+ RADIO1_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
+ RADIO1_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
+ RADIO1_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
+ RADIO1_ADDRESS_OFFSET, // address_offset: address offset
+ RADIO1_ADDRESS_OFFSET + RADIO1_ADDRESS_LEN, // address_end: end of address
+ RADIO1_COMMAND_OFFSET, // command_offset: command offset
+ RADIO1_COMMAND_OFFSET + RADIO1_COMMAND_LEN, // command_end: end of command
+ RADIO1_COMPLETE_DATA_LEN, // complete_len: complete length of frame
+ RADIO1_STOP_BIT, // stop_bit: flag: frame has stop bit
+ RADIO1_LSB, // lsb_first: flag: LSB first
+ RADIO1_FLAGS // flags: some flags
+};
+
+#endif
+
+static uint_fast8_t irmp_bit; // current bit position
+static IRMP_PARAMETER irmp_param;
+
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)
+static IRMP_PARAMETER irmp_param2;
+#endif
+
+static volatile uint_fast8_t irmp_ir_detected = FALSE;
+static volatile uint_fast8_t irmp_protocol;
+static volatile uint_fast16_t irmp_address;
+#if IRMP_32_BIT == 1
+static volatile uint_fast32_t irmp_command;
+#else
+static volatile uint_fast16_t irmp_command;
+#endif
+static volatile uint_fast16_t irmp_id; // only used for SAMSUNG protocol
+static volatile uint_fast8_t irmp_flags;
+// static volatile uint_fast8_t irmp_busy_flag;
+
+#if defined(__MBED__)
+// DigitalIn inputPin(IRMP_PIN, PullUp); // this requires mbed.h and source to be compiled as cpp
+gpio_t gpioIRin; // use low level c function instead
+#endif
+
+
+#ifdef ANALYZE
+#define input(x) (x)
+static uint_fast8_t IRMP_PIN;
+static uint_fast8_t radio;
+#endif
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Initialize IRMP decoder
+ * @details Configures IRMP input pin
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#ifndef ANALYZE
+void
+irmp_init (void)
+{
+#if defined(PIC_CCS) || defined(PIC_C18) // PIC: do nothing
+#elif defined (ARM_STM32_HAL) // STM32 with Hal Library: do nothing
+#elif defined (ARM_STM32) // STM32
+ GPIO_InitTypeDef GPIO_InitStructure;
+
+ /* GPIOx clock enable */
+# if defined (ARM_STM32L1XX)
+ RCC_AHBPeriphClockCmd(IRMP_PORT_RCC, ENABLE);
+# elif defined (ARM_STM32F10X)
+ RCC_APB2PeriphClockCmd(IRMP_PORT_RCC, ENABLE);
+# elif defined (ARM_STM32F4XX)
+ RCC_AHB1PeriphClockCmd(IRMP_PORT_RCC, ENABLE);
+# endif
+
+ /* GPIO Configuration */
+ GPIO_InitStructure.GPIO_Pin = IRMP_BIT;
+# if defined (ARM_STM32L1XX) || defined (ARM_STM32F4XX)
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+ GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
+ GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
+# elif defined (ARM_STM32F10X)
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+# endif
+ GPIO_Init(IRMP_PORT, &GPIO_InitStructure);
+
+#elif defined(STELLARIS_ARM_CORTEX_M4)
+ // Enable the GPIO port
+ ROM_SysCtlPeripheralEnable(IRMP_PORT_PERIPH);
+
+ // Set as an input
+ ROM_GPIODirModeSet(IRMP_PORT_BASE, IRMP_PORT_PIN, GPIO_DIR_MODE_IN);
+ ROM_GPIOPadConfigSet(IRMP_PORT_BASE, IRMP_PORT_PIN, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD_WPU);
+
+#elif defined(__SDCC_stm8) // STM8
+ IRMP_GPIO_STRUCT->DDR &= ~(1<<IRMP_BIT); // pin is input
+ IRMP_GPIO_STRUCT->CR1 |= (1<<IRMP_BIT); // activate pullup
+
+#elif defined (TEENSY_ARM_CORTEX_M4) // TEENSY
+ pinMode(IRMP_PIN, INPUT);
+
+#elif defined(__xtensa__) // ESP8266
+ pinMode(IRMP_BIT_NUMBER, INPUT);
+ // select pin function
+# if (IRMP_BIT_NUMBER == 12)
+ PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDI_U, FUNC_GPIO12);
+// doesn't work for me:
+// # elif (IRMP_BIT_NUMBER == 13)
+// PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTCK_U , FUNC_GPIO13);
+# else
+# warning Please add PIN_FUNC_SELECT when necessary.
+# endif
+ GPIO_DIS_OUTPUT(IRMP_BIT_NUMBER);
+
+#elif defined(__MBED__)
+ gpio_init_in_ex(&gpioIRin, IRMP_PIN, IRMP_PINMODE); // initialize input for IR diode
+
+#elif defined(_CHIBIOS_HAL_)
+ // ChibiOS HAL automatically initializes all pins according to the board config file, no need to repeat here
+
+#else // AVR
+ IRMP_PORT &= ~(1<<IRMP_BIT); // deactivate pullup
+ IRMP_DDR &= ~(1<<IRMP_BIT); // set pin to input
+#endif
+
+#if IRMP_LOGGING == 1
+ irmp_uart_init ();
+#endif
+}
+#endif
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Get IRMP data
+ * @details gets decoded IRMP data
+ * @param pointer in order to store IRMP data
+ * @return TRUE: successful, FALSE: failed
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+uint_fast8_t
+irmp_get_data (IRMP_DATA * irmp_data_p)
+{
+ uint_fast8_t rtc = FALSE;
+#if IRMP_SUPPORT_MERLIN_PROTOCOL == 1
+ uint_fast8_t cmd_len = 0;
+#endif
+
+ if (irmp_ir_detected)
+ {
+ switch (irmp_protocol)
+ {
+#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
+ case IRMP_SAMSUNG_PROTOCOL:
+ if ((irmp_command >> 8) == (~irmp_command & 0x00FF))
+ {
+ irmp_command &= 0xff;
+ irmp_command |= irmp_id << 8;
+ rtc = TRUE;
+ }
+ break;
+
+#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1
+ case IRMP_SAMSUNG48_PROTOCOL:
+ irmp_command = (irmp_command & 0x00FF) | ((irmp_id & 0x00FF) << 8);
+ rtc = TRUE;
+ break;
+#endif
+#endif
+
+#if IRMP_SUPPORT_NEC_PROTOCOL == 1
+ case IRMP_NEC_PROTOCOL:
+ if ((irmp_command >> 8) == (~irmp_command & 0x00FF))
+ {
+ irmp_command &= 0xff;
+ rtc = TRUE;
+ }
+ else if (irmp_address == 0x87EE)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to APPLE protocol\n");
+#endif // ANALYZE
+ irmp_protocol = IRMP_APPLE_PROTOCOL;
+ irmp_address = (irmp_command & 0xFF00) >> 8;
+ irmp_command &= 0x00FF;
+ rtc = TRUE;
+ }
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to ONKYO protocol\n");
+#endif // ANALYZE
+ irmp_protocol = IRMP_ONKYO_PROTOCOL;
+ rtc = TRUE;
+ }
+ break;
+#endif
+
+
+#if IRMP_SUPPORT_NEC_PROTOCOL == 1
+ case IRMP_VINCENT_PROTOCOL:
+ if ((irmp_command >> 8) == (irmp_command & 0x00FF))
+ {
+ irmp_command &= 0xff;
+ rtc = TRUE;
+ }
+ break;
+#endif
+
+#if IRMP_SUPPORT_BOSE_PROTOCOL == 1
+ case IRMP_BOSE_PROTOCOL:
+ if ((irmp_command >> 8) == (~irmp_command & 0x00FF))
+ {
+ irmp_command &= 0xff;
+ rtc = TRUE;
+ }
+ break;
+#endif
+
+#if IRMP_SUPPORT_MERLIN_PROTOCOL == 1
+ case IRMP_MERLIN_PROTOCOL:
+ if (irmp_bit == 10)
+ {
+ rtc = TRUE;
+ }
+ else if (irmp_bit >= 19 && ((irmp_bit - 3) % 8 == 0))
+ {
+ if (((irmp_command >> 1) & 1) != (irmp_command & 1))
+ {
+ irmp_command >>= 1;
+ irmp_command |= ((irmp_address & 1) << (irmp_bit - 12));
+ irmp_address >>= 1;
+ cmd_len = (irmp_bit - 11) >> 3;
+ rtc = TRUE;
+ }
+ }
+ break;
+#endif
+
+#if IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1
+ case IRMP_SIEMENS_PROTOCOL:
+ case IRMP_RUWIDO_PROTOCOL:
+ if (((irmp_command >> 1) & 0x0001) == (~irmp_command & 0x0001))
+ {
+ irmp_command >>= 1;
+ rtc = TRUE;
+ }
+ break;
+#endif
+#if IRMP_SUPPORT_KATHREIN_PROTOCOL == 1
+ case IRMP_KATHREIN_PROTOCOL:
+ if (irmp_command != 0x0000)
+ {
+ rtc = TRUE;
+ }
+ break;
+#endif
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1
+ case IRMP_RC5_PROTOCOL:
+ irmp_address &= ~0x20; // clear toggle bit
+ rtc = TRUE;
+ break;
+#endif
+#if IRMP_SUPPORT_S100_PROTOCOL == 1
+ case IRMP_S100_PROTOCOL:
+ irmp_address &= ~0x20; // clear toggle bit
+ rtc = TRUE;
+ break;
+#endif
+#if IRMP_SUPPORT_IR60_PROTOCOL == 1
+ case IRMP_IR60_PROTOCOL:
+ if (irmp_command != 0x007d) // 0x007d (== 62<<1 + 1) is start instruction frame
+ {
+ rtc = TRUE;
+ }
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF("Info IR60: got start instruction frame\n");
+#endif // ANALYZE
+ }
+ break;
+#endif
+#if IRMP_SUPPORT_RCCAR_PROTOCOL == 1
+ case IRMP_RCCAR_PROTOCOL:
+ // frame in irmp_data:
+ // Bit 12 11 10 9 8 7 6 5 4 3 2 1 0
+ // V D7 D6 D5 D4 D3 D2 D1 D0 A1 A0 C1 C0 // 10 9 8 7 6 5 4 3 2 1 0
+ irmp_address = (irmp_command & 0x000C) >> 2; // addr: 0 0 0 0 0 0 0 0 0 A1 A0
+ irmp_command = ((irmp_command & 0x1000) >> 2) | // V-Bit: V 0 0 0 0 0 0 0 0 0 0
+ ((irmp_command & 0x0003) << 8) | // C-Bits: 0 C1 C0 0 0 0 0 0 0 0 0
+ ((irmp_command & 0x0FF0) >> 4); // D-Bits: D7 D6 D5 D4 D3 D2 D1 D0
+ rtc = TRUE; // Summe: V C1 C0 D7 D6 D5 D4 D3 D2 D1 D0
+ break;
+#endif
+
+#if IRMP_SUPPORT_NETBOX_PROTOCOL == 1 // squeeze code to 8 bit, upper bit indicates release-key
+ case IRMP_NETBOX_PROTOCOL:
+ if (irmp_command & 0x1000) // last bit set?
+ {
+ if ((irmp_command & 0x1f) == 0x15) // key pressed: 101 01 (LSB)
+ {
+ irmp_command >>= 5;
+ irmp_command &= 0x7F;
+ rtc = TRUE;
+ }
+ else if ((irmp_command & 0x1f) == 0x10) // key released: 000 01 (LSB)
+ {
+ irmp_command >>= 5;
+ irmp_command |= 0x80;
+ rtc = TRUE;
+ }
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF("error NETBOX: bit6/7 must be 0/1\n");
+#endif // ANALYZE
+ }
+ }
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF("error NETBOX: last bit not set\n");
+#endif // ANALYZE
+ }
+ break;
+#endif
+#if IRMP_SUPPORT_LEGO_PROTOCOL == 1
+ case IRMP_LEGO_PROTOCOL:
+ {
+ uint_fast8_t crc = 0x0F ^ ((irmp_command & 0xF000) >> 12) ^ ((irmp_command & 0x0F00) >> 8) ^ ((irmp_command & 0x00F0) >> 4);
+
+ if ((irmp_command & 0x000F) == crc)
+ {
+ irmp_command >>= 4;
+ rtc = TRUE;
+ }
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("CRC error in LEGO protocol\n");
+#endif // ANALYZE
+ // rtc = TRUE; // don't accept codes with CRC errors
+ }
+ break;
+ }
+#endif
+
+#if IRMP_SUPPORT_METZ_PROTOCOL == 1
+ case IRMP_METZ_PROTOCOL:
+ irmp_address &= ~0x40; // clear toggle bit
+ if (((~irmp_address) & 0x07) == (irmp_address >> 3) && ((~irmp_command) & 0x3f) == (irmp_command >> 6))
+ {
+ irmp_address >>= 3;
+ irmp_command >>= 6;
+ rtc = TRUE;
+ }
+ break;
+#endif
+ default:
+ {
+ rtc = TRUE;
+ break;
+ }
+ }
+
+ if (rtc)
+ {
+ irmp_data_p->protocol = irmp_protocol;
+ irmp_data_p->address = irmp_address;
+ irmp_data_p->command = irmp_command;
+ irmp_data_p->flags = irmp_flags;
+#if IRMP_SUPPORT_MERLIN_PROTOCOL == 1
+ irmp_data_p->flags |= cmd_len;
+#endif
+ }
+ else
+ {
+ irmp_protocol = IRMP_UNKNOWN_PROTOCOL;
+ }
+
+ irmp_command = 0; // don't reset irmp_protocol here, needed for detection of NEC & JVC repetition frames!
+ irmp_address = 0;
+ irmp_flags = 0;
+
+ irmp_ir_detected = FALSE;
+ }
+
+ return rtc;
+}
+
+#if IRMP_USE_CALLBACK == 1
+void
+irmp_set_callback_ptr (void (*cb)(uint_fast8_t))
+{
+ irmp_callback_ptr = cb;
+}
+#endif // IRMP_USE_CALLBACK == 1
+
+// these statics must not be volatile, because they are only used by irmp_store_bit(), which is called by irmp_ISR()
+static uint_fast16_t irmp_tmp_address; // ir address
+#if IRMP_32_BIT == 1
+static uint_fast32_t irmp_tmp_command; // ir command
+#else
+static uint_fast16_t irmp_tmp_command; // ir command
+#endif
+
+#if (IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)) || IRMP_SUPPORT_NEC42_PROTOCOL == 1
+static uint_fast16_t irmp_tmp_address2; // ir address
+static uint_fast16_t irmp_tmp_command2; // ir command
+#endif
+
+#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1
+static uint_fast16_t irmp_lgair_address; // ir address
+static uint_fast16_t irmp_lgair_command; // ir command
+#endif
+
+#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
+static uint_fast16_t irmp_tmp_id; // ir id (only SAMSUNG)
+#endif
+#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
+static uint8_t xor_check[6]; // check kaseikyo "parity" bits
+static uint_fast8_t genre2; // save genre2 bits here, later copied to MSB in flags
+#endif
+
+#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1
+static uint_fast8_t parity; // number of '1' of the first 14 bits, check if even.
+#endif
+
+#if IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL == 1
+static uint_fast8_t check; // number of '1' of the first 14 bits, check if even.
+static uint_fast8_t mitsu_parity; // number of '1' of the first 14 bits, check if even.
+#endif
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * store bit
+ * @details store bit in temp address or temp command
+ * @param value to store: 0 or 1
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+// verhindert, dass irmp_store_bit() inline compiliert wird:
+// static void irmp_store_bit (uint_fast8_t) __attribute__ ((noinline));
+
+static void
+irmp_store_bit (uint_fast8_t value)
+{
+#if IRMP_SUPPORT_ACP24_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_ACP24_PROTOCOL) // squeeze 64 bits into 16 bits:
+ {
+ if (value)
+ {
+ // ACP24-Frame:
+ // 1 2 3 4 5 6
+ // 0123456789012345678901234567890123456789012345678901234567890123456789
+ // N VVMMM ? ??? t vmA x y TTTT
+ //
+ // irmp_data_p->command:
+ //
+ // 5432109876543210
+ // NAVVvMMMmtxyTTTT
+
+ switch (irmp_bit)
+ {
+ case 0: irmp_tmp_command |= (1<<15); break; // N
+ case 2: irmp_tmp_command |= (1<<13); break; // V
+ case 3: irmp_tmp_command |= (1<<12); break; // V
+ case 4: irmp_tmp_command |= (1<<10); break; // M
+ case 5: irmp_tmp_command |= (1<< 9); break; // M
+ case 6: irmp_tmp_command |= (1<< 8); break; // M
+ case 20: irmp_tmp_command |= (1<< 6); break; // t
+ case 22: irmp_tmp_command |= (1<<11); break; // v
+ case 23: irmp_tmp_command |= (1<< 7); break; // m
+ case 24: irmp_tmp_command |= (1<<14); break; // A
+ case 26: irmp_tmp_command |= (1<< 5); break; // x
+ case 44: irmp_tmp_command |= (1<< 4); break; // y
+ case 66: irmp_tmp_command |= (1<< 3); break; // T
+ case 67: irmp_tmp_command |= (1<< 2); break; // T
+ case 68: irmp_tmp_command |= (1<< 1); break; // T
+ case 69: irmp_tmp_command |= (1<< 0); break; // T
+ }
+ }
+ }
+ else
+#endif // IRMP_SUPPORT_ACP24_PROTOCOL
+
+#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_ORTEK_PROTOCOL)
+ {
+ if (irmp_bit < 14)
+ {
+ if (value)
+ {
+ parity++;
+ }
+ }
+ else if (irmp_bit == 14)
+ {
+ if (value) // value == 1: even parity
+ {
+ if (parity & 0x01)
+ {
+ parity = PARITY_CHECK_FAILED;
+ }
+ else
+ {
+ parity = PARITY_CHECK_OK;
+ }
+ }
+ else
+ {
+ if (parity & 0x01) // value == 0: odd parity
+ {
+ parity = PARITY_CHECK_OK;
+ }
+ else
+ {
+ parity = PARITY_CHECK_FAILED;
+ }
+ }
+ }
+ }
+ else
+#endif
+ {
+ ;
+ }
+
+#if IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL == 1
+ if (irmp_bit == 0 && irmp_param.protocol == IRMP_GRUNDIG_PROTOCOL)
+ {
+ first_bit = value;
+ }
+ else
+#endif
+
+ if (irmp_bit >= irmp_param.address_offset && irmp_bit < irmp_param.address_end)
+ {
+ if (irmp_param.lsb_first)
+ {
+ irmp_tmp_address |= (((uint_fast16_t) (value)) << (irmp_bit - irmp_param.address_offset)); // CV wants cast
+ }
+ else
+ {
+ irmp_tmp_address <<= 1;
+ irmp_tmp_address |= value;
+ }
+ }
+ else if (irmp_bit >= irmp_param.command_offset && irmp_bit < irmp_param.command_end)
+ {
+ if (irmp_param.lsb_first)
+ {
+#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_SAMSUNG48_PROTOCOL && irmp_bit >= 32)
+ {
+ irmp_tmp_id |= (((uint_fast16_t) (value)) << (irmp_bit - 32)); // CV wants cast
+ }
+ else
+#endif
+ {
+ irmp_tmp_command |= (((uint_fast16_t) (value)) << (irmp_bit - irmp_param.command_offset)); // CV wants cast
+ }
+ }
+ else
+ {
+ irmp_tmp_command <<= 1;
+ irmp_tmp_command |= value;
+ }
+ }
+
+#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_NEC_PROTOCOL || irmp_param.protocol == IRMP_NEC42_PROTOCOL)
+ {
+ if (irmp_bit < 8)
+ {
+ irmp_lgair_address <<= 1; // LGAIR uses MSB
+ irmp_lgair_address |= value;
+ }
+ else if (irmp_bit < 24)
+ {
+ irmp_lgair_command <<= 1; // LGAIR uses MSB
+ irmp_lgair_command |= value;
+ }
+ }
+ // NO else!
+#endif
+
+#if IRMP_SUPPORT_NEC42_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && irmp_bit >= 13 && irmp_bit < 26)
+ {
+ irmp_tmp_address2 |= (((uint_fast16_t) (value)) << (irmp_bit - 13)); // CV wants cast
+ }
+ else
+#endif
+
+#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_SAMSUNG_PROTOCOL && irmp_bit >= SAMSUNG_ID_OFFSET && irmp_bit < SAMSUNG_ID_OFFSET + SAMSUNG_ID_LEN)
+ {
+ irmp_tmp_id |= (((uint_fast16_t) (value)) << (irmp_bit - SAMSUNG_ID_OFFSET)); // store with LSB first
+ }
+ else
+#endif
+
+#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_KASEIKYO_PROTOCOL)
+ {
+ if (irmp_bit >= 20 && irmp_bit < 24)
+ {
+ irmp_tmp_command |= (((uint_fast16_t) (value)) << (irmp_bit - 8)); // store 4 system bits (genre 1) in upper nibble with LSB first
+ }
+ else if (irmp_bit >= 24 && irmp_bit < 28)
+ {
+ genre2 |= (((uint_fast8_t) (value)) << (irmp_bit - 20)); // store 4 system bits (genre 2) in upper nibble with LSB first
+ }
+
+ if (irmp_bit < KASEIKYO_COMPLETE_DATA_LEN)
+ {
+ if (value)
+ {
+ xor_check[irmp_bit / 8] |= 1 << (irmp_bit % 8);
+ }
+ else
+ {
+ xor_check[irmp_bit / 8] &= ~(1 << (irmp_bit % 8));
+ }
+ }
+ }
+ else
+#endif
+
+#if IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_MITSU_HEAVY_PROTOCOL) // squeeze 64 bits into 16 bits:
+ {
+ if (irmp_bit == 72 )
+ { // irmp_tmp_address, irmp_tmp_command received: check parity & compress
+ mitsu_parity = PARITY_CHECK_OK;
+
+ check = irmp_tmp_address >> 8; // inverted upper byte == lower byte?
+ check = ~ check;
+
+ if (check == (irmp_tmp_address & 0xFF))
+ { // ok:
+ irmp_tmp_address <<= 8; // throw away upper byte
+ }
+ else
+ {
+ mitsu_parity = PARITY_CHECK_FAILED;
+ }
+
+ check = irmp_tmp_command >> 8; // inverted upper byte == lower byte?
+ check = ~ check;
+ if (check == (irmp_tmp_command & 0xFF))
+ { // ok: pack together
+ irmp_tmp_address |= irmp_tmp_command & 0xFF; // byte 1, byte2 in irmp_tmp_address, irmp_tmp_command can be used for byte 3
+ }
+ else
+ {
+ mitsu_parity = PARITY_CHECK_FAILED;
+ }
+ irmp_tmp_command = 0;
+ }
+
+ if (irmp_bit >= 72 )
+ { // receive 3. word in irmp_tmp_command
+ irmp_tmp_command <<= 1;
+ irmp_tmp_command |= value;
+ }
+ }
+ else
+#endif // IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL
+ {
+ ;
+ }
+
+ irmp_bit++;
+}
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * store bit
+ * @details store bit in temp address or temp command
+ * @param value to store: 0 or 1
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)
+static void
+irmp_store_bit2 (uint_fast8_t value)
+{
+ uint_fast8_t irmp_bit2;
+
+ if (irmp_param.protocol)
+ {
+ irmp_bit2 = irmp_bit - 2;
+ }
+ else
+ {
+ irmp_bit2 = irmp_bit - 1;
+ }
+
+ if (irmp_bit2 >= irmp_param2.address_offset && irmp_bit2 < irmp_param2.address_end)
+ {
+ irmp_tmp_address2 |= (((uint_fast16_t) (value)) << (irmp_bit2 - irmp_param2.address_offset)); // CV wants cast
+ }
+ else if (irmp_bit2 >= irmp_param2.command_offset && irmp_bit2 < irmp_param2.command_end)
+ {
+ irmp_tmp_command2 |= (((uint_fast16_t) (value)) << (irmp_bit2 - irmp_param2.command_offset)); // CV wants cast
+ }
+}
+#endif // IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * ISR routine
+ * @details ISR routine, called 10000 times per second
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+uint_fast8_t
+irmp_ISR (void)
+{
+ static uint_fast8_t irmp_start_bit_detected; // flag: start bit detected
+ static uint_fast8_t wait_for_space; // flag: wait for data bit space
+ static uint_fast8_t wait_for_start_space; // flag: wait for start bit space
+ static uint_fast8_t irmp_pulse_time; // count bit time for pulse
+ static PAUSE_LEN irmp_pause_time; // count bit time for pause
+ static uint_fast16_t last_irmp_address = 0xFFFF; // save last irmp address to recognize key repetition
+#if IRMP_32_BIT == 1
+ static uint_fast32_t last_irmp_command = 0xFFFFFFFF; // save last irmp command to recognize key repetition
+#else
+ static uint_fast16_t last_irmp_command = 0xFFFF; // save last irmp command to recognize key repetition
+#endif
+ static uint_fast16_t key_repetition_len; // SIRCS repeats frame 2-5 times with 45 ms pause
+ static uint_fast8_t repetition_frame_number;
+#if IRMP_SUPPORT_DENON_PROTOCOL == 1
+ static uint_fast16_t last_irmp_denon_command; // save last irmp command to recognize DENON frame repetition
+ static uint_fast16_t denon_repetition_len = 0xFFFF; // denon repetition len of 2nd auto generated frame
+#endif
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 || IRMP_SUPPORT_S100_PROTOCOL == 1
+ static uint_fast8_t rc5_cmd_bit6; // bit 6 of RC5 command is the inverted 2nd start bit
+#endif
+#if IRMP_SUPPORT_MANCHESTER == 1
+ static PAUSE_LEN last_pause; // last pause value
+#endif
+#if IRMP_SUPPORT_MANCHESTER == 1 || IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1
+ static uint_fast8_t last_value; // last bit value
+#endif
+#if IRMP_SUPPORT_RCII_PROTOCOL == 1
+ static uint_fast8_t waiting_for_2nd_pulse = 0;
+#endif
+ uint_fast8_t irmp_input; // input value
+
+#ifdef ANALYZE
+
+#if 0 // only for test
+ static uint_fast8_t last_irmp_start_bit_detected = 0xFF;
+ static uint_fast8_t last_irmp_pulse_time = 0xFF;
+
+ if (last_irmp_start_bit_detected != irmp_start_bit_detected || last_irmp_pulse_time != irmp_pulse_time)
+ {
+ last_irmp_start_bit_detected = irmp_start_bit_detected;
+ last_irmp_pulse_time = irmp_pulse_time;
+
+ printf ("%d %d %d\n", time_counter, irmp_start_bit_detected, irmp_pulse_time);
+ }
+#endif // 0
+
+ time_counter++;
+#endif // ANALYZE
+
+#if defined(__SDCC_stm8)
+ irmp_input = input(IRMP_GPIO_STRUCT->IDR)
+#elif defined(__MBED__)
+ //irmp_input = inputPin;
+ irmp_input = gpio_read (&gpioIRin);
+#else
+ irmp_input = input(IRMP_PIN);
+#endif
+
+#if IRMP_USE_CALLBACK == 1
+ if (irmp_callback_ptr)
+ {
+ static uint_fast8_t last_inverted_input;
+
+ if (last_inverted_input != !irmp_input)
+ {
+ (*irmp_callback_ptr) (! irmp_input);
+ last_inverted_input = !irmp_input;
+ }
+ }
+#endif // IRMP_USE_CALLBACK == 1
+
+ irmp_log(irmp_input); // log ir signal, if IRMP_LOGGING defined
+
+ if (! irmp_ir_detected) // ir code already detected?
+ { // no...
+ if (! irmp_start_bit_detected) // start bit detected?
+ { // no...
+ if (! irmp_input) // receiving burst?
+ { // yes...
+// irmp_busy_flag = TRUE;
+#ifdef ANALYZE
+ if (! irmp_pulse_time)
+ {
+ ANALYZE_PRINTF("%8.3fms [starting pulse]\n", (double) (time_counter * 1000) / F_INTERRUPTS);
+ }
+#endif // ANALYZE
+ irmp_pulse_time++; // increment counter
+ }
+ else
+ { // no...
+ if (irmp_pulse_time) // it's dark....
+ { // set flags for counting the time of darkness...
+ irmp_start_bit_detected = 1;
+ wait_for_start_space = 1;
+ wait_for_space = 0;
+ irmp_tmp_command = 0;
+ irmp_tmp_address = 0;
+#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
+ genre2 = 0;
+#endif
+#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
+ irmp_tmp_id = 0;
+#endif
+
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) || IRMP_SUPPORT_NEC42_PROTOCOL == 1
+ irmp_tmp_command2 = 0;
+ irmp_tmp_address2 = 0;
+#endif
+#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1
+ irmp_lgair_command = 0;
+ irmp_lgair_address = 0;
+#endif
+ irmp_bit = 0xff;
+ irmp_pause_time = 1; // 1st pause: set to 1, not to 0!
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 || IRMP_SUPPORT_S100_PROTOCOL == 1
+ rc5_cmd_bit6 = 0; // fm 2010-03-07: bugfix: reset it after incomplete RC5 frame!
+#endif
+ }
+ else
+ {
+ if (key_repetition_len < 0xFFFF) // avoid overflow of counter
+ {
+ key_repetition_len++;
+
+#if IRMP_SUPPORT_DENON_PROTOCOL == 1
+ if (denon_repetition_len < 0xFFFF) // avoid overflow of counter
+ {
+ denon_repetition_len++;
+
+ if (denon_repetition_len >= DENON_AUTO_REPETITION_PAUSE_LEN && last_irmp_denon_command != 0)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("%8.3fms warning: did not receive inverted command repetition\n",
+ (double) (time_counter * 1000) / F_INTERRUPTS);
+#endif // ANALYZE
+ last_irmp_denon_command = 0;
+ denon_repetition_len = 0xFFFF;
+ }
+ }
+#endif // IRMP_SUPPORT_DENON_PROTOCOL == 1
+ }
+ }
+ }
+ }
+ else
+ {
+ if (wait_for_start_space) // we have received start bit...
+ { // ...and are counting the time of darkness
+ if (irmp_input) // still dark?
+ { // yes
+ irmp_pause_time++; // increment counter
+
+#if IRMP_SUPPORT_NIKON_PROTOCOL == 1
+ if (((irmp_pulse_time < NIKON_START_BIT_PULSE_LEN_MIN || irmp_pulse_time > NIKON_START_BIT_PULSE_LEN_MAX) && irmp_pause_time > IRMP_TIMEOUT_LEN) ||
+ irmp_pause_time > IRMP_TIMEOUT_NIKON_LEN)
+#else
+ if (irmp_pause_time > IRMP_TIMEOUT_LEN) // timeout?
+#endif
+ { // yes...
+#if IRMP_SUPPORT_JVC_PROTOCOL == 1
+ if (irmp_protocol == IRMP_JVC_PROTOCOL) // don't show eror if JVC protocol, irmp_pulse_time has been set below!
+ {
+ ;
+ }
+ else
+#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("%8.3fms error 1: pause after start bit pulse %d too long: %d\n", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_pulse_time, irmp_pause_time);
+ ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
+#endif // ANALYZE
+ }
+
+ irmp_start_bit_detected = 0; // reset flags, let's wait for another start bit
+ irmp_pulse_time = 0;
+ irmp_pause_time = 0;
+ }
+ }
+ else
+ { // receiving first data pulse!
+ IRMP_PARAMETER * irmp_param_p;
+ irmp_param_p = (IRMP_PARAMETER *) 0;
+
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)
+ irmp_param2.protocol = 0;
+#endif
+
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("%8.3fms [start-bit: pulse = %2d, pause = %2d]\n", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_pulse_time, irmp_pause_time);
+#endif // ANALYZE
+
+#if IRMP_SUPPORT_SIRCS_PROTOCOL == 1
+ if (irmp_pulse_time >= SIRCS_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SIRCS_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= SIRCS_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SIRCS_START_BIT_PAUSE_LEN_MAX)
+ { // it's SIRCS
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = SIRCS, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ SIRCS_START_BIT_PULSE_LEN_MIN, SIRCS_START_BIT_PULSE_LEN_MAX,
+ SIRCS_START_BIT_PAUSE_LEN_MIN, SIRCS_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &sircs_param;
+ }
+ else
+#endif // IRMP_SUPPORT_SIRCS_PROTOCOL == 1
+
+#if IRMP_SUPPORT_JVC_PROTOCOL == 1
+ if (irmp_protocol == IRMP_JVC_PROTOCOL && // last protocol was JVC, awaiting repeat frame
+ irmp_pulse_time >= JVC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= JVC_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= JVC_REPEAT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= JVC_REPEAT_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = NEC or JVC (type 1) repeat frame, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ JVC_START_BIT_PULSE_LEN_MIN, JVC_START_BIT_PULSE_LEN_MAX,
+ JVC_REPEAT_START_BIT_PAUSE_LEN_MIN, JVC_REPEAT_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &nec_param;
+ }
+ else
+#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1
+
+#if IRMP_SUPPORT_NEC_PROTOCOL == 1
+ if (irmp_pulse_time >= NEC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NEC_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= NEC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NEC_START_BIT_PAUSE_LEN_MAX)
+ {
+#if IRMP_SUPPORT_NEC42_PROTOCOL == 1
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = NEC42, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,
+ NEC_START_BIT_PAUSE_LEN_MIN, NEC_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &nec42_param;
+#else
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = NEC, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,
+ NEC_START_BIT_PAUSE_LEN_MIN, NEC_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &nec_param;
+#endif
+ }
+ else if (irmp_pulse_time >= NEC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NEC_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= NEC_REPEAT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NEC_REPEAT_START_BIT_PAUSE_LEN_MAX)
+ { // it's NEC
+#if IRMP_SUPPORT_JVC_PROTOCOL == 1
+ if (irmp_protocol == IRMP_JVC_PROTOCOL) // last protocol was JVC, awaiting repeat frame
+ { // some jvc remote controls use nec repetition frame for jvc repetition frame
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = JVC repeat frame type 2, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,
+ NEC_REPEAT_START_BIT_PAUSE_LEN_MIN, NEC_REPEAT_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &nec_param;
+ }
+ else
+#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = NEC (repetition frame), start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,
+ NEC_REPEAT_START_BIT_PAUSE_LEN_MIN, NEC_REPEAT_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+
+ irmp_param_p = (IRMP_PARAMETER *) &nec_rep_param;
+ }
+ }
+ else
+
+#if IRMP_SUPPORT_JVC_PROTOCOL == 1
+ if (irmp_protocol == IRMP_JVC_PROTOCOL && // last protocol was JVC, awaiting repeat frame
+ irmp_pulse_time >= NEC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NEC_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= NEC_0_PAUSE_LEN_MIN && irmp_pause_time <= NEC_0_PAUSE_LEN_MAX)
+ { // it's JVC repetition type 3
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = JVC repeat frame type 3, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,
+ NEC_0_PAUSE_LEN_MIN, NEC_0_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &nec_param;
+ }
+ else
+#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1
+
+#endif // IRMP_SUPPORT_NEC_PROTOCOL == 1
+
+#if IRMP_SUPPORT_TELEFUNKEN_PROTOCOL == 1
+ if (irmp_pulse_time >= TELEFUNKEN_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= TELEFUNKEN_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= TELEFUNKEN_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= TELEFUNKEN_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = TELEFUNKEN, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ TELEFUNKEN_START_BIT_PULSE_LEN_MIN, TELEFUNKEN_START_BIT_PULSE_LEN_MAX,
+ TELEFUNKEN_START_BIT_PAUSE_LEN_MIN, TELEFUNKEN_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &telefunken_param;
+ }
+ else
+#endif // IRMP_SUPPORT_TELEFUNKEN_PROTOCOL == 1
+
+#if IRMP_SUPPORT_ROOMBA_PROTOCOL == 1
+ if (irmp_pulse_time >= ROOMBA_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= ROOMBA_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= ROOMBA_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= ROOMBA_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = ROOMBA, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ ROOMBA_START_BIT_PULSE_LEN_MIN, ROOMBA_START_BIT_PULSE_LEN_MAX,
+ ROOMBA_START_BIT_PAUSE_LEN_MIN, ROOMBA_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &roomba_param;
+ }
+ else
+#endif // IRMP_SUPPORT_ROOMBA_PROTOCOL == 1
+
+#if IRMP_SUPPORT_ACP24_PROTOCOL == 1
+ if (irmp_pulse_time >= ACP24_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= ACP24_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= ACP24_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= ACP24_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = ACP24, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ ACP24_START_BIT_PULSE_LEN_MIN, ACP24_START_BIT_PULSE_LEN_MAX,
+ ACP24_START_BIT_PAUSE_LEN_MIN, ACP24_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &acp24_param;
+ }
+ else
+#endif // IRMP_SUPPORT_ROOMBA_PROTOCOL == 1
+
+#if IRMP_SUPPORT_PENTAX_PROTOCOL == 1
+ if (irmp_pulse_time >= PENTAX_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= PENTAX_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= PENTAX_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= PENTAX_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = PENTAX, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ PENTAX_START_BIT_PULSE_LEN_MIN, PENTAX_START_BIT_PULSE_LEN_MAX,
+ PENTAX_START_BIT_PAUSE_LEN_MIN, PENTAX_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &pentax_param;
+ }
+ else
+#endif // IRMP_SUPPORT_PENTAX_PROTOCOL == 1
+
+#if IRMP_SUPPORT_NIKON_PROTOCOL == 1
+ if (irmp_pulse_time >= NIKON_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NIKON_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= NIKON_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NIKON_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = NIKON, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ NIKON_START_BIT_PULSE_LEN_MIN, NIKON_START_BIT_PULSE_LEN_MAX,
+ NIKON_START_BIT_PAUSE_LEN_MIN, NIKON_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &nikon_param;
+ }
+ else
+#endif // IRMP_SUPPORT_NIKON_PROTOCOL == 1
+
+#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
+ if (irmp_pulse_time >= SAMSUNG_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SAMSUNG_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= SAMSUNG_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SAMSUNG_START_BIT_PAUSE_LEN_MAX)
+ { // it's SAMSUNG
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = SAMSUNG, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ SAMSUNG_START_BIT_PULSE_LEN_MIN, SAMSUNG_START_BIT_PULSE_LEN_MAX,
+ SAMSUNG_START_BIT_PAUSE_LEN_MIN, SAMSUNG_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &samsung_param;
+ }
+ else
+#endif // IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
+
+#if IRMP_SUPPORT_SAMSUNGAH_PROTOCOL == 1
+ if (irmp_pulse_time >= SAMSUNGAH_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SAMSUNGAH_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= SAMSUNGAH_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SAMSUNGAH_START_BIT_PAUSE_LEN_MAX)
+ { // it's SAMSUNGAH
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = SAMSUNGAH, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ SAMSUNGAH_START_BIT_PULSE_LEN_MIN, SAMSUNGAH_START_BIT_PULSE_LEN_MAX,
+ SAMSUNGAH_START_BIT_PAUSE_LEN_MIN, SAMSUNGAH_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &samsungah_param;
+ }
+ else
+#endif // IRMP_SUPPORT_SAMSUNGAH_PROTOCOL == 1
+
+#if IRMP_SUPPORT_MATSUSHITA_PROTOCOL == 1
+ if (irmp_pulse_time >= MATSUSHITA_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= MATSUSHITA_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= MATSUSHITA_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= MATSUSHITA_START_BIT_PAUSE_LEN_MAX)
+ { // it's MATSUSHITA
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = MATSUSHITA, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ MATSUSHITA_START_BIT_PULSE_LEN_MIN, MATSUSHITA_START_BIT_PULSE_LEN_MAX,
+ MATSUSHITA_START_BIT_PAUSE_LEN_MIN, MATSUSHITA_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &matsushita_param;
+ }
+ else
+#endif // IRMP_SUPPORT_MATSUSHITA_PROTOCOL == 1
+
+#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
+ if (irmp_pulse_time >= KASEIKYO_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= KASEIKYO_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= KASEIKYO_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= KASEIKYO_START_BIT_PAUSE_LEN_MAX)
+ { // it's KASEIKYO
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = KASEIKYO, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ KASEIKYO_START_BIT_PULSE_LEN_MIN, KASEIKYO_START_BIT_PULSE_LEN_MAX,
+ KASEIKYO_START_BIT_PAUSE_LEN_MIN, KASEIKYO_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &kaseikyo_param;
+ }
+ else
+#endif // IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
+
+#if IRMP_SUPPORT_PANASONIC_PROTOCOL == 1
+ if (irmp_pulse_time >= PANASONIC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= PANASONIC_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= PANASONIC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= PANASONIC_START_BIT_PAUSE_LEN_MAX)
+ { // it's PANASONIC
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = PANASONIC, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ PANASONIC_START_BIT_PULSE_LEN_MIN, PANASONIC_START_BIT_PULSE_LEN_MAX,
+ PANASONIC_START_BIT_PAUSE_LEN_MIN, PANASONIC_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &panasonic_param;
+ }
+ else
+#endif // IRMP_SUPPORT_PANASONIC_PROTOCOL == 1
+
+#if IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL == 1
+ if (irmp_pulse_time >= MITSU_HEAVY_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= MITSU_HEAVY_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= MITSU_HEAVY_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= MITSU_HEAVY_START_BIT_PAUSE_LEN_MAX)
+ { // it's MITSU_HEAVY
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = MITSU_HEAVY, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ MITSU_HEAVY_START_BIT_PULSE_LEN_MIN, MITSU_HEAVY_START_BIT_PULSE_LEN_MAX,
+ MITSU_HEAVY_START_BIT_PAUSE_LEN_MIN, MITSU_HEAVY_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &mitsu_heavy_param;
+ }
+ else
+#endif // IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL == 1
+
+#if IRMP_SUPPORT_VINCENT_PROTOCOL == 1
+ if (irmp_pulse_time >= VINCENT_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= VINCENT_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= VINCENT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= VINCENT_START_BIT_PAUSE_LEN_MAX)
+ { // it's VINCENT
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = VINCENT, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ VINCENT_START_BIT_PULSE_LEN_MIN, VINCENT_START_BIT_PULSE_LEN_MAX,
+ VINCENT_START_BIT_PAUSE_LEN_MIN, VINCENT_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &vincent_param;
+ }
+ else
+#endif // IRMP_SUPPORT_VINCENT_PROTOCOL == 1
+
+#if IRMP_SUPPORT_METZ_PROTOCOL == 1
+ if (irmp_pulse_time >= METZ_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= METZ_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= METZ_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= METZ_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = METZ, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ METZ_START_BIT_PULSE_LEN_MIN, METZ_START_BIT_PULSE_LEN_MAX,
+ METZ_START_BIT_PAUSE_LEN_MIN, METZ_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &metz_param;
+ }
+ else
+#endif // IRMP_SUPPORT_METZ_PROTOCOL == 1
+
+#if IRMP_SUPPORT_RADIO1_PROTOCOL == 1
+ if (irmp_pulse_time >= RADIO1_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RADIO1_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= RADIO1_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RADIO1_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = RADIO1, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ RADIO1_START_BIT_PULSE_LEN_MIN, RADIO1_START_BIT_PULSE_LEN_MAX,
+ RADIO1_START_BIT_PAUSE_LEN_MIN, RADIO1_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &radio1_param;
+ }
+ else
+#endif // IRMP_SUPPORT_RRADIO1_PROTOCOL == 1
+
+#if IRMP_SUPPORT_RECS80_PROTOCOL == 1
+ if (irmp_pulse_time >= RECS80_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RECS80_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= RECS80_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RECS80_START_BIT_PAUSE_LEN_MAX)
+ { // it's RECS80
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = RECS80, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ RECS80_START_BIT_PULSE_LEN_MIN, RECS80_START_BIT_PULSE_LEN_MAX,
+ RECS80_START_BIT_PAUSE_LEN_MIN, RECS80_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &recs80_param;
+ }
+ else
+#endif // IRMP_SUPPORT_RECS80_PROTOCOL == 1
+
+#if IRMP_SUPPORT_S100_PROTOCOL == 1
+ if (((irmp_pulse_time >= S100_START_BIT_LEN_MIN && irmp_pulse_time <= S100_START_BIT_LEN_MAX) ||
+ (irmp_pulse_time >= 2 * S100_START_BIT_LEN_MIN && irmp_pulse_time <= 2 * S100_START_BIT_LEN_MAX)) &&
+ ((irmp_pause_time >= S100_START_BIT_LEN_MIN && irmp_pause_time <= S100_START_BIT_LEN_MAX) ||
+ (irmp_pause_time >= 2 * S100_START_BIT_LEN_MIN && irmp_pause_time <= 2 * S100_START_BIT_LEN_MAX)))
+ { // it's S100
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = S100, start bit timings: pulse: %3d - %3d, pause: %3d - %3d or pulse: %3d - %3d, pause: %3d - %3d\n",
+ S100_START_BIT_LEN_MIN, S100_START_BIT_LEN_MAX,
+ 2 * S100_START_BIT_LEN_MIN, 2 * S100_START_BIT_LEN_MAX,
+ S100_START_BIT_LEN_MIN, S100_START_BIT_LEN_MAX,
+ 2 * S100_START_BIT_LEN_MIN, 2 * S100_START_BIT_LEN_MAX);
+#endif // ANALYZE
+
+ irmp_param_p = (IRMP_PARAMETER *) &s100_param;
+ last_pause = irmp_pause_time;
+
+ if ((irmp_pulse_time > S100_START_BIT_LEN_MAX && irmp_pulse_time <= 2 * S100_START_BIT_LEN_MAX) ||
+ (irmp_pause_time > S100_START_BIT_LEN_MAX && irmp_pause_time <= 2 * S100_START_BIT_LEN_MAX))
+ {
+ last_value = 0;
+ rc5_cmd_bit6 = 1<<6;
+ }
+ else
+ {
+ last_value = 1;
+ }
+ }
+ else
+#endif // IRMP_SUPPORT_S100_PROTOCOL == 1
+
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1
+ if (((irmp_pulse_time >= RC5_START_BIT_LEN_MIN && irmp_pulse_time <= RC5_START_BIT_LEN_MAX) ||
+ (irmp_pulse_time >= 2 * RC5_START_BIT_LEN_MIN && irmp_pulse_time <= 2 * RC5_START_BIT_LEN_MAX)) &&
+ ((irmp_pause_time >= RC5_START_BIT_LEN_MIN && irmp_pause_time <= RC5_START_BIT_LEN_MAX) ||
+ (irmp_pause_time >= 2 * RC5_START_BIT_LEN_MIN && irmp_pause_time <= 2 * RC5_START_BIT_LEN_MAX)))
+ { // it's RC5
+#if IRMP_SUPPORT_FDC_PROTOCOL == 1
+ if (irmp_pulse_time >= FDC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= FDC_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= FDC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= FDC_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = RC5 or FDC\n");
+ ANALYZE_PRINTF ("FDC start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ FDC_START_BIT_PULSE_LEN_MIN, FDC_START_BIT_PULSE_LEN_MAX,
+ FDC_START_BIT_PAUSE_LEN_MIN, FDC_START_BIT_PAUSE_LEN_MAX);
+ ANALYZE_PRINTF ("RC5 start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX,
+ RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX);
+#endif // ANALYZE
+ memcpy_P (&irmp_param2, &fdc_param, sizeof (IRMP_PARAMETER));
+ }
+ else
+#endif // IRMP_SUPPORT_FDC_PROTOCOL == 1
+
+#if IRMP_SUPPORT_RCCAR_PROTOCOL == 1
+ if (irmp_pulse_time >= RCCAR_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RCCAR_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= RCCAR_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = RC5 or RCCAR\n");
+ ANALYZE_PRINTF ("RCCAR start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ RCCAR_START_BIT_PULSE_LEN_MIN, RCCAR_START_BIT_PULSE_LEN_MAX,
+ RCCAR_START_BIT_PAUSE_LEN_MIN, RCCAR_START_BIT_PAUSE_LEN_MAX);
+ ANALYZE_PRINTF ("RC5 start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX,
+ RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX);
+#endif // ANALYZE
+ memcpy_P (&irmp_param2, &rccar_param, sizeof (IRMP_PARAMETER));
+ }
+ else
+#endif // IRMP_SUPPORT_RCCAR_PROTOCOL == 1
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = RC5, start bit timings: pulse: %3d - %3d, pause: %3d - %3d or pulse: %3d - %3d, pause: %3d - %3d\n",
+ RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX,
+ 2 * RC5_START_BIT_LEN_MIN, 2 * RC5_START_BIT_LEN_MAX,
+ RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX,
+ 2 * RC5_START_BIT_LEN_MIN, 2 * RC5_START_BIT_LEN_MAX);
+#endif // ANALYZE
+ }
+
+ irmp_param_p = (IRMP_PARAMETER *) &rc5_param;
+ last_pause = irmp_pause_time;
+
+ if ((irmp_pulse_time > RC5_START_BIT_LEN_MAX && irmp_pulse_time <= 2 * RC5_START_BIT_LEN_MAX) ||
+ (irmp_pause_time > RC5_START_BIT_LEN_MAX && irmp_pause_time <= 2 * RC5_START_BIT_LEN_MAX))
+ {
+ last_value = 0;
+ rc5_cmd_bit6 = 1<<6;
+ }
+ else
+ {
+ last_value = 1;
+ }
+ }
+ else
+#endif // IRMP_SUPPORT_RC5_PROTOCOL == 1
+
+#if IRMP_SUPPORT_RCII_PROTOCOL == 1
+ if ((irmp_pulse_time >= RCII_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RCII_START_BIT_PULSE_LEN_MAX) &&
+ (irmp_pause_time >= RCII_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RCII_START_BIT_PAUSE_LEN_MAX))
+ { // it's RCII
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = RCII, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ RCII_START_BIT_PULSE_LEN_MIN, RCII_START_BIT_PULSE_LEN_MAX,
+ RCII_START_BIT_PAUSE_LEN_MIN, RCII_START_BIT_PAUSE_LEN_MAX)
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &rcii_param;
+ last_pause = irmp_pause_time;
+ waiting_for_2nd_pulse = 1;
+ last_value = 1;
+ }
+ else
+#endif // IRMP_SUPPORT_RCII_PROTOCOL == 1
+
+#if IRMP_SUPPORT_DENON_PROTOCOL == 1
+ if ( (irmp_pulse_time >= DENON_PULSE_LEN_MIN && irmp_pulse_time <= DENON_PULSE_LEN_MAX) &&
+ ((irmp_pause_time >= DENON_1_PAUSE_LEN_MIN && irmp_pause_time <= DENON_1_PAUSE_LEN_MAX) ||
+ (irmp_pause_time >= DENON_0_PAUSE_LEN_MIN && irmp_pause_time <= DENON_0_PAUSE_LEN_MAX)))
+ { // it's DENON
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = DENON, start bit timings: pulse: %3d - %3d, pause: %3d - %3d or %3d - %3d\n",
+ DENON_PULSE_LEN_MIN, DENON_PULSE_LEN_MAX,
+ DENON_1_PAUSE_LEN_MIN, DENON_1_PAUSE_LEN_MAX,
+ DENON_0_PAUSE_LEN_MIN, DENON_0_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &denon_param;
+ }
+ else
+#endif // IRMP_SUPPORT_DENON_PROTOCOL == 1
+
+#if IRMP_SUPPORT_THOMSON_PROTOCOL == 1
+ if ( (irmp_pulse_time >= THOMSON_PULSE_LEN_MIN && irmp_pulse_time <= THOMSON_PULSE_LEN_MAX) &&
+ ((irmp_pause_time >= THOMSON_1_PAUSE_LEN_MIN && irmp_pause_time <= THOMSON_1_PAUSE_LEN_MAX) ||
+ (irmp_pause_time >= THOMSON_0_PAUSE_LEN_MIN && irmp_pause_time <= THOMSON_0_PAUSE_LEN_MAX)))
+ { // it's THOMSON
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = THOMSON, start bit timings: pulse: %3d - %3d, pause: %3d - %3d or %3d - %3d\n",
+ THOMSON_PULSE_LEN_MIN, THOMSON_PULSE_LEN_MAX,
+ THOMSON_1_PAUSE_LEN_MIN, THOMSON_1_PAUSE_LEN_MAX,
+ THOMSON_0_PAUSE_LEN_MIN, THOMSON_0_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &thomson_param;
+ }
+ else
+#endif // IRMP_SUPPORT_THOMSON_PROTOCOL == 1
+
+#if IRMP_SUPPORT_BOSE_PROTOCOL == 1
+ if (irmp_pulse_time >= BOSE_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= BOSE_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= BOSE_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= BOSE_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = BOSE, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ BOSE_START_BIT_PULSE_LEN_MIN, BOSE_START_BIT_PULSE_LEN_MAX,
+ BOSE_START_BIT_PAUSE_LEN_MIN, BOSE_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &bose_param;
+ }
+ else
+#endif // IRMP_SUPPORT_BOSE_PROTOCOL == 1
+
+#if IRMP_SUPPORT_RC6_PROTOCOL == 1
+ if (irmp_pulse_time >= RC6_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RC6_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= RC6_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RC6_START_BIT_PAUSE_LEN_MAX)
+ { // it's RC6
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = RC6, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ RC6_START_BIT_PULSE_LEN_MIN, RC6_START_BIT_PULSE_LEN_MAX,
+ RC6_START_BIT_PAUSE_LEN_MIN, RC6_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &rc6_param;
+ last_pause = 0;
+ last_value = 1;
+ }
+ else
+#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1
+
+#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1
+ if (irmp_pulse_time >= RECS80EXT_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RECS80EXT_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= RECS80EXT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RECS80EXT_START_BIT_PAUSE_LEN_MAX)
+ { // it's RECS80EXT
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = RECS80EXT, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ RECS80EXT_START_BIT_PULSE_LEN_MIN, RECS80EXT_START_BIT_PULSE_LEN_MAX,
+ RECS80EXT_START_BIT_PAUSE_LEN_MIN, RECS80EXT_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &recs80ext_param;
+ }
+ else
+#endif // IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1
+
+#if IRMP_SUPPORT_NUBERT_PROTOCOL == 1
+ if (irmp_pulse_time >= NUBERT_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NUBERT_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= NUBERT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NUBERT_START_BIT_PAUSE_LEN_MAX)
+ { // it's NUBERT
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = NUBERT, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ NUBERT_START_BIT_PULSE_LEN_MIN, NUBERT_START_BIT_PULSE_LEN_MAX,
+ NUBERT_START_BIT_PAUSE_LEN_MIN, NUBERT_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &nubert_param;
+ }
+ else
+#endif // IRMP_SUPPORT_NUBERT_PROTOCOL == 1
+
+#if IRMP_SUPPORT_FAN_PROTOCOL == 1
+ if (irmp_pulse_time >= FAN_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= FAN_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= FAN_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= FAN_START_BIT_PAUSE_LEN_MAX)
+ { // it's FAN
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = FAN, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ FAN_START_BIT_PULSE_LEN_MIN, FAN_START_BIT_PULSE_LEN_MAX,
+ FAN_START_BIT_PAUSE_LEN_MIN, FAN_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &fan_param;
+ }
+ else
+#endif // IRMP_SUPPORT_FAN_PROTOCOL == 1
+
+#if IRMP_SUPPORT_SPEAKER_PROTOCOL == 1
+ if (irmp_pulse_time >= SPEAKER_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SPEAKER_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= SPEAKER_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SPEAKER_START_BIT_PAUSE_LEN_MAX)
+ { // it's SPEAKER
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = SPEAKER, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ SPEAKER_START_BIT_PULSE_LEN_MIN, SPEAKER_START_BIT_PULSE_LEN_MAX,
+ SPEAKER_START_BIT_PAUSE_LEN_MIN, SPEAKER_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &speaker_param;
+ }
+ else
+#endif // IRMP_SUPPORT_SPEAKER_PROTOCOL == 1
+
+#if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1
+ if (irmp_pulse_time >= BANG_OLUFSEN_START_BIT1_PULSE_LEN_MIN && irmp_pulse_time <= BANG_OLUFSEN_START_BIT1_PULSE_LEN_MAX &&
+ irmp_pause_time >= BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MAX)
+ { // it's BANG_OLUFSEN
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = BANG_OLUFSEN\n");
+ ANALYZE_PRINTF ("start bit 1 timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ BANG_OLUFSEN_START_BIT1_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT1_PULSE_LEN_MAX,
+ BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MAX);
+ ANALYZE_PRINTF ("start bit 2 timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ BANG_OLUFSEN_START_BIT2_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT2_PULSE_LEN_MAX,
+ BANG_OLUFSEN_START_BIT2_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT2_PAUSE_LEN_MAX);
+ ANALYZE_PRINTF ("start bit 3 timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ BANG_OLUFSEN_START_BIT3_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT3_PULSE_LEN_MAX,
+ BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MAX);
+ ANALYZE_PRINTF ("start bit 4 timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ BANG_OLUFSEN_START_BIT4_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT4_PULSE_LEN_MAX,
+ BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &bang_olufsen_param;
+ last_value = 0;
+ }
+ else
+#endif // IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1
+
+#if IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL == 1
+ if (irmp_pulse_time >= GRUNDIG_NOKIA_IR60_START_BIT_LEN_MIN && irmp_pulse_time <= GRUNDIG_NOKIA_IR60_START_BIT_LEN_MAX &&
+ irmp_pause_time >= GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MIN && irmp_pause_time <= GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MAX)
+ { // it's GRUNDIG
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = GRUNDIG, pre bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ GRUNDIG_NOKIA_IR60_START_BIT_LEN_MIN, GRUNDIG_NOKIA_IR60_START_BIT_LEN_MAX,
+ GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MIN, GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &grundig_param;
+ last_pause = irmp_pause_time;
+ last_value = 1;
+ }
+ else
+#endif // IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL == 1
+
+#if IRMP_SUPPORT_MERLIN_PROTOCOL == 1 // check MERLIN before RUWIDO!
+ if (irmp_pulse_time >= MERLIN_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= MERLIN_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= MERLIN_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= MERLIN_START_BIT_PAUSE_LEN_MAX)
+ { // it's MERLIN
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = MERLIN, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ MERLIN_START_BIT_PULSE_LEN_MIN, MERLIN_START_BIT_PULSE_LEN_MAX,
+ MERLIN_START_BIT_PAUSE_LEN_MIN, MERLIN_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &merlin_param;
+ last_pause = irmp_pause_time;
+ last_value = 1;
+ }
+ else
+#endif // IRMP_SUPPORT_MERLIN_PROTOCOL == 1
+
+#if IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1
+ if (((irmp_pulse_time >= SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX) ||
+ (irmp_pulse_time >= 2 * SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= 2 * SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX)) &&
+ ((irmp_pause_time >= SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX) ||
+ (irmp_pause_time >= 2 * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= 2 * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX)))
+ { // it's RUWIDO or SIEMENS
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = RUWIDO, start bit timings: pulse: %3d - %3d or %3d - %3d, pause: %3d - %3d or %3d - %3d\n",
+ SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN, SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX,
+ 2 * SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN, 2 * SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX,
+ SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN, SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX,
+ 2 * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN, 2 * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &ruwido_param;
+ last_pause = irmp_pause_time;
+ last_value = 1;
+ }
+ else
+#endif // IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1
+
+#if IRMP_SUPPORT_FDC_PROTOCOL == 1
+ if (irmp_pulse_time >= FDC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= FDC_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= FDC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= FDC_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = FDC, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ FDC_START_BIT_PULSE_LEN_MIN, FDC_START_BIT_PULSE_LEN_MAX,
+ FDC_START_BIT_PAUSE_LEN_MIN, FDC_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &fdc_param;
+ }
+ else
+#endif // IRMP_SUPPORT_FDC_PROTOCOL == 1
+
+#if IRMP_SUPPORT_RCCAR_PROTOCOL == 1
+ if (irmp_pulse_time >= RCCAR_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RCCAR_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= RCCAR_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = RCCAR, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ RCCAR_START_BIT_PULSE_LEN_MIN, RCCAR_START_BIT_PULSE_LEN_MAX,
+ RCCAR_START_BIT_PAUSE_LEN_MIN, RCCAR_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &rccar_param;
+ }
+ else
+#endif // IRMP_SUPPORT_RCCAR_PROTOCOL == 1
+
+#if IRMP_SUPPORT_KATHREIN_PROTOCOL == 1
+ if (irmp_pulse_time >= KATHREIN_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= KATHREIN_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= KATHREIN_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= KATHREIN_START_BIT_PAUSE_LEN_MAX)
+ { // it's KATHREIN
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = KATHREIN, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ KATHREIN_START_BIT_PULSE_LEN_MIN, KATHREIN_START_BIT_PULSE_LEN_MAX,
+ KATHREIN_START_BIT_PAUSE_LEN_MIN, KATHREIN_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &kathrein_param;
+ }
+ else
+#endif // IRMP_SUPPORT_KATHREIN_PROTOCOL == 1
+
+#if IRMP_SUPPORT_NETBOX_PROTOCOL == 1
+ if (irmp_pulse_time >= NETBOX_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NETBOX_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= NETBOX_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NETBOX_START_BIT_PAUSE_LEN_MAX)
+ { // it's NETBOX
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = NETBOX, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ NETBOX_START_BIT_PULSE_LEN_MIN, NETBOX_START_BIT_PULSE_LEN_MAX,
+ NETBOX_START_BIT_PAUSE_LEN_MIN, NETBOX_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &netbox_param;
+ }
+ else
+#endif // IRMP_SUPPORT_NETBOX_PROTOCOL == 1
+
+#if IRMP_SUPPORT_LEGO_PROTOCOL == 1
+ if (irmp_pulse_time >= LEGO_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= LEGO_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= LEGO_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= LEGO_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = LEGO, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ LEGO_START_BIT_PULSE_LEN_MIN, LEGO_START_BIT_PULSE_LEN_MAX,
+ LEGO_START_BIT_PAUSE_LEN_MIN, LEGO_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &lego_param;
+ }
+ else
+#endif // IRMP_SUPPORT_LEGO_PROTOCOL == 1
+
+#if IRMP_SUPPORT_IRMP16_PROTOCOL == 1
+ if (irmp_pulse_time >= IRMP16_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= IRMP16_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= IRMP16_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= IRMP16_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = IRMP16, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ IRMP16_START_BIT_PULSE_LEN_MIN, IRMP16_START_BIT_PULSE_LEN_MAX,
+ IRMP16_START_BIT_PAUSE_LEN_MIN, IRMP16_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &irmp16_param;
+ }
+ else
+#endif // IRMP_SUPPORT_IRMP16_PROTOCOL == 1
+
+#if IRMP_SUPPORT_GREE_PROTOCOL == 1
+ if (irmp_pulse_time >= GREE_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= GREE_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= GREE_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= GREE_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = GREE, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ GREE_START_BIT_PULSE_LEN_MIN, GREE_START_BIT_PULSE_LEN_MAX,
+ GREE_START_BIT_PAUSE_LEN_MIN, GREE_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &gree_param;
+ }
+ else
+#endif // IRMP_SUPPORT_GREE_PROTOCOL == 1
+
+#if IRMP_SUPPORT_A1TVBOX_PROTOCOL == 1
+ if (irmp_pulse_time >= A1TVBOX_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= A1TVBOX_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= A1TVBOX_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= A1TVBOX_START_BIT_PAUSE_LEN_MAX)
+ { // it's A1TVBOX
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = A1TVBOX, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ A1TVBOX_START_BIT_PULSE_LEN_MIN, A1TVBOX_START_BIT_PULSE_LEN_MAX,
+ A1TVBOX_START_BIT_PAUSE_LEN_MIN, A1TVBOX_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &a1tvbox_param;
+ last_pause = 0;
+ last_value = 1;
+ }
+ else
+#endif // IRMP_SUPPORT_A1TVBOX_PROTOCOL == 1
+
+#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1
+ if (irmp_pulse_time >= ORTEK_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= ORTEK_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= ORTEK_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= ORTEK_START_BIT_PAUSE_LEN_MAX)
+ { // it's ORTEK (Hama)
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = ORTEK, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ ORTEK_START_BIT_PULSE_LEN_MIN, ORTEK_START_BIT_PULSE_LEN_MAX,
+ ORTEK_START_BIT_PAUSE_LEN_MIN, ORTEK_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &ortek_param;
+ last_pause = 0;
+ last_value = 1;
+ parity = 0;
+ }
+ else
+#endif // IRMP_SUPPORT_ORTEK_PROTOCOL == 1
+
+#if IRMP_SUPPORT_RCMM_PROTOCOL == 1
+ if (irmp_pulse_time >= RCMM32_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RCMM32_START_BIT_PULSE_LEN_MAX &&
+ irmp_pause_time >= RCMM32_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RCMM32_START_BIT_PAUSE_LEN_MAX)
+ { // it's RCMM
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = RCMM, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
+ RCMM32_START_BIT_PULSE_LEN_MIN, RCMM32_START_BIT_PULSE_LEN_MAX,
+ RCMM32_START_BIT_PAUSE_LEN_MIN, RCMM32_START_BIT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_param_p = (IRMP_PARAMETER *) &rcmm_param;
+ }
+ else
+#endif // IRMP_SUPPORT_RCMM_PROTOCOL == 1
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("protocol = UNKNOWN\n");
+#endif // ANALYZE
+ irmp_start_bit_detected = 0; // wait for another start bit...
+ }
+
+ if (irmp_start_bit_detected)
+ {
+ memcpy_P (&irmp_param, irmp_param_p, sizeof (IRMP_PARAMETER));
+
+ if (! (irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER))
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("pulse_1: %3d - %3d\n", irmp_param.pulse_1_len_min, irmp_param.pulse_1_len_max);
+ ANALYZE_PRINTF ("pause_1: %3d - %3d\n", irmp_param.pause_1_len_min, irmp_param.pause_1_len_max);
+#endif // ANALYZE
+ }
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("pulse: %3d - %3d or %3d - %3d\n", irmp_param.pulse_1_len_min, irmp_param.pulse_1_len_max,
+ 2 * irmp_param.pulse_1_len_min, 2 * irmp_param.pulse_1_len_max);
+ ANALYZE_PRINTF ("pause: %3d - %3d or %3d - %3d\n", irmp_param.pause_1_len_min, irmp_param.pause_1_len_max,
+ 2 * irmp_param.pause_1_len_min, 2 * irmp_param.pause_1_len_max);
+#endif // ANALYZE
+ }
+
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)
+ if (irmp_param2.protocol)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("pulse_0: %3d - %3d\n", irmp_param2.pulse_0_len_min, irmp_param2.pulse_0_len_max);
+ ANALYZE_PRINTF ("pause_0: %3d - %3d\n", irmp_param2.pause_0_len_min, irmp_param2.pause_0_len_max);
+ ANALYZE_PRINTF ("pulse_1: %3d - %3d\n", irmp_param2.pulse_1_len_min, irmp_param2.pulse_1_len_max);
+ ANALYZE_PRINTF ("pause_1: %3d - %3d\n", irmp_param2.pause_1_len_min, irmp_param2.pause_1_len_max);
+#endif // ANALYZE
+ }
+#endif
+
+
+#if IRMP_SUPPORT_RC6_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_RC6_PROTOCOL)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("pulse_toggle: %3d - %3d\n", RC6_TOGGLE_BIT_LEN_MIN, RC6_TOGGLE_BIT_LEN_MAX);
+#endif // ANALYZE
+ }
+#endif
+
+ if (! (irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER))
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("pulse_0: %3d - %3d\n", irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max);
+ ANALYZE_PRINTF ("pause_0: %3d - %3d\n", irmp_param.pause_0_len_min, irmp_param.pause_0_len_max);
+#endif // ANALYZE
+ }
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("pulse: %3d - %3d or %3d - %3d\n", irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max,
+ 2 * irmp_param.pulse_0_len_min, 2 * irmp_param.pulse_0_len_max);
+ ANALYZE_PRINTF ("pause: %3d - %3d or %3d - %3d\n", irmp_param.pause_0_len_min, irmp_param.pause_0_len_max,
+ 2 * irmp_param.pause_0_len_min, 2 * irmp_param.pause_0_len_max);
+#endif // ANALYZE
+ }
+
+#ifdef ANALYZE
+#if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_BANG_OLUFSEN_PROTOCOL)
+ {
+ ANALYZE_PRINTF ("pulse_r: %3d - %3d\n", irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max);
+ ANALYZE_PRINTF ("pause_r: %3d - %3d\n", BANG_OLUFSEN_R_PAUSE_LEN_MIN, BANG_OLUFSEN_R_PAUSE_LEN_MAX);
+ }
+#endif
+
+ ANALYZE_PRINTF ("command_offset: %2d\n", irmp_param.command_offset);
+ ANALYZE_PRINTF ("command_len: %3d\n", irmp_param.command_end - irmp_param.command_offset);
+ ANALYZE_PRINTF ("complete_len: %3d\n", irmp_param.complete_len);
+ ANALYZE_PRINTF ("stop_bit: %3d\n", irmp_param.stop_bit);
+#endif // ANALYZE
+ }
+
+ irmp_bit = 0;
+
+#if IRMP_SUPPORT_MANCHESTER == 1
+ if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER) &&
+ irmp_param.protocol != IRMP_RUWIDO_PROTOCOL && // Manchester, but not RUWIDO
+ irmp_param.protocol != IRMP_RC6_PROTOCOL /*** && // Manchester, but not RC6
+ irmp_param.protocol != IRMP_RCII_PROTOCOL ****/) // Manchester, but not RCII
+ {
+ if (irmp_pause_time > irmp_param.pulse_1_len_max && irmp_pause_time <= 2 * irmp_param.pulse_1_len_max)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);
+ ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '0' : '1');
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 0 : 1);
+ }
+ else if (! last_value) // && irmp_pause_time >= irmp_param.pause_1_len_min && irmp_pause_time <= irmp_param.pause_1_len_max)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);
+ ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '1' : '0');
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 1 : 0);
+ }
+ }
+ else
+#endif // IRMP_SUPPORT_MANCHESTER == 1
+
+#if IRMP_SUPPORT_SERIAL == 1
+ if (irmp_param.flags & IRMP_PARAM_FLAG_IS_SERIAL)
+ {
+ ; // do nothing
+ }
+ else
+#endif // IRMP_SUPPORT_SERIAL == 1
+
+
+#if IRMP_SUPPORT_DENON_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_DENON_PROTOCOL)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);
+#endif // ANALYZE
+
+ if (irmp_pause_time >= DENON_1_PAUSE_LEN_MIN && irmp_pause_time <= DENON_1_PAUSE_LEN_MAX)
+ { // pause timings correct for "1"?
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('1'); // yes, store 1
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ irmp_store_bit (1);
+ }
+ else // if (irmp_pause_time >= DENON_0_PAUSE_LEN_MIN && irmp_pause_time <= DENON_0_PAUSE_LEN_MAX)
+ { // pause timings correct for "0"?
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('0'); // yes, store 0
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ irmp_store_bit (0);
+ }
+ }
+ else
+#endif // IRMP_SUPPORT_DENON_PROTOCOL == 1
+#if IRMP_SUPPORT_THOMSON_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_THOMSON_PROTOCOL)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);
+#endif // ANALYZE
+
+ if (irmp_pause_time >= THOMSON_1_PAUSE_LEN_MIN && irmp_pause_time <= THOMSON_1_PAUSE_LEN_MAX)
+ { // pause timings correct for "1"?
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('1'); // yes, store 1
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ irmp_store_bit (1);
+ }
+ else // if (irmp_pause_time >= THOMSON_0_PAUSE_LEN_MIN && irmp_pause_time <= THOMSON_0_PAUSE_LEN_MAX)
+ { // pause timings correct for "0"?
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('0'); // yes, store 0
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ irmp_store_bit (0);
+ }
+ }
+ else
+#endif // IRMP_SUPPORT_THOMSON_PROTOCOL == 1
+ {
+ ; // else do nothing
+ }
+
+ irmp_pulse_time = 1; // set counter to 1, not 0
+ irmp_pause_time = 0;
+ wait_for_start_space = 0;
+ }
+ }
+ else if (wait_for_space) // the data section....
+ { // counting the time of darkness....
+ uint_fast8_t got_light = FALSE;
+
+ if (irmp_input) // still dark?
+ { // yes...
+ if (irmp_bit == irmp_param.complete_len && irmp_param.stop_bit == 1)
+ {
+ if (
+#if IRMP_SUPPORT_MANCHESTER == 1
+ (irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER) ||
+#endif
+#if IRMP_SUPPORT_SERIAL == 1
+ (irmp_param.flags & IRMP_PARAM_FLAG_IS_SERIAL) ||
+#endif
+ (irmp_pulse_time >= irmp_param.pulse_0_len_min && irmp_pulse_time <= irmp_param.pulse_0_len_max))
+ {
+#ifdef ANALYZE
+ if (! (irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER))
+ {
+ ANALYZE_PRINTF ("stop bit detected\n");
+ }
+#endif // ANALYZE
+ irmp_param.stop_bit = 0;
+ }
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("error: stop bit timing wrong, irmp_bit = %d, irmp_pulse_time = %d, pulse_0_len_min = %d, pulse_0_len_max = %d\n",
+ irmp_bit, irmp_pulse_time, irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max);
+#endif // ANALYZE
+ irmp_start_bit_detected = 0; // wait for another start bit...
+ irmp_pulse_time = 0;
+ irmp_pause_time = 0;
+ }
+ }
+ else
+ {
+ irmp_pause_time++; // increment counter
+
+#if IRMP_SUPPORT_SIRCS_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_SIRCS_PROTOCOL && // Sony has a variable number of bits:
+ irmp_pause_time > SIRCS_PAUSE_LEN_MAX && // minimum is 12
+ irmp_bit >= 12 - 1) // pause too long?
+ { // yes, break and close this frame
+ irmp_param.complete_len = irmp_bit + 1; // set new complete length
+ got_light = TRUE; // this is a lie, but helps (generates stop bit)
+ irmp_tmp_address |= (irmp_bit - SIRCS_MINIMUM_DATA_LEN + 1) << 8; // new: store number of additional bits in upper byte of address!
+ irmp_param.command_end = irmp_param.command_offset + irmp_bit + 1; // correct command length
+ irmp_pause_time = SIRCS_PAUSE_LEN_MAX - 1; // correct pause length
+ }
+ else
+#endif
+#if IRMP_SUPPORT_MERLIN_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_MERLIN_PROTOCOL && // Merlin has a variable number of bits:
+ irmp_pause_time > MERLIN_START_BIT_PAUSE_LEN_MAX && // minimum is 8
+ irmp_bit >= 8 - 1) // pause too long?
+ { // yes, break and close this frame
+ irmp_param.complete_len = irmp_bit; // set new complete length
+ got_light = TRUE; // this is a lie, but helps (generates stop bit)
+ irmp_pause_time = MERLIN_BIT_PAUSE_LEN_MAX - 1; // correct pause length
+ }
+ else
+#endif
+#if IRMP_SUPPORT_FAN_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_FAN_PROTOCOL && // FAN has no stop bit.
+ irmp_bit >= FAN_COMPLETE_DATA_LEN - 1) // last bit in frame
+ { // yes, break and close this frame
+ if (irmp_pulse_time <= FAN_0_PULSE_LEN_MAX && irmp_pause_time >= FAN_0_PAUSE_LEN_MIN)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Generating virtual stop bit\n");
+#endif // ANALYZE
+ got_light = TRUE; // this is a lie, but helps (generates stop bit)
+ }
+ else if (irmp_pulse_time >= FAN_1_PULSE_LEN_MIN && irmp_pause_time >= FAN_1_PAUSE_LEN_MIN)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Generating virtual stop bit\n");
+#endif // ANALYZE
+ got_light = TRUE; // this is a lie, but helps (generates stop bit)
+ }
+ }
+ else
+#endif
+#if IRMP_SUPPORT_SERIAL == 1
+ // NETBOX generates no stop bit, here is the timeout condition:
+ if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_SERIAL) && irmp_param.protocol == IRMP_NETBOX_PROTOCOL &&
+ irmp_pause_time >= NETBOX_PULSE_LEN * (NETBOX_COMPLETE_DATA_LEN - irmp_bit))
+ {
+ got_light = TRUE; // this is a lie, but helps (generates stop bit)
+ }
+ else
+#endif
+#if IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_GRUNDIG_PROTOCOL && !irmp_param.stop_bit)
+ {
+ if (irmp_pause_time > IR60_TIMEOUT_LEN && (irmp_bit == 5 || irmp_bit == 6))
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to IR60 protocol\n");
+#endif // ANALYZE
+ got_light = TRUE; // this is a lie, but generates a stop bit ;-)
+ irmp_param.stop_bit = TRUE; // set flag
+
+ irmp_param.protocol = IRMP_IR60_PROTOCOL; // change protocol
+ irmp_param.complete_len = IR60_COMPLETE_DATA_LEN; // correct complete len
+ irmp_param.address_offset = IR60_ADDRESS_OFFSET;
+ irmp_param.address_end = IR60_ADDRESS_OFFSET + IR60_ADDRESS_LEN;
+ irmp_param.command_offset = IR60_COMMAND_OFFSET;
+ irmp_param.command_end = IR60_COMMAND_OFFSET + IR60_COMMAND_LEN;
+
+ irmp_tmp_command <<= 1;
+ irmp_tmp_command |= first_bit;
+ }
+ else if (irmp_pause_time >= 2 * irmp_param.pause_1_len_max && irmp_bit >= GRUNDIG_COMPLETE_DATA_LEN - 2)
+ { // special manchester decoder
+ irmp_param.complete_len = GRUNDIG_COMPLETE_DATA_LEN; // correct complete len
+ got_light = TRUE; // this is a lie, but generates a stop bit ;-)
+ irmp_param.stop_bit = TRUE; // set flag
+ }
+ else if (irmp_bit >= GRUNDIG_COMPLETE_DATA_LEN)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to NOKIA protocol, irmp_bit = %d\n", irmp_bit);
+#endif // ANALYZE
+ irmp_param.protocol = IRMP_NOKIA_PROTOCOL; // change protocol
+ irmp_param.address_offset = NOKIA_ADDRESS_OFFSET;
+ irmp_param.address_end = NOKIA_ADDRESS_OFFSET + NOKIA_ADDRESS_LEN;
+ irmp_param.command_offset = NOKIA_COMMAND_OFFSET;
+ irmp_param.command_end = NOKIA_COMMAND_OFFSET + NOKIA_COMMAND_LEN;
+
+ if (irmp_tmp_command & 0x300)
+ {
+ irmp_tmp_address = (irmp_tmp_command >> 8);
+ irmp_tmp_command &= 0xFF;
+ }
+ }
+ }
+ else
+#endif
+#if IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_RUWIDO_PROTOCOL && !irmp_param.stop_bit)
+ {
+ if (irmp_pause_time >= 2 * irmp_param.pause_1_len_max && irmp_bit >= RUWIDO_COMPLETE_DATA_LEN - 2)
+ { // special manchester decoder
+ irmp_param.complete_len = RUWIDO_COMPLETE_DATA_LEN; // correct complete len
+ got_light = TRUE; // this is a lie, but generates a stop bit ;-)
+ irmp_param.stop_bit = TRUE; // set flag
+ }
+ else if (irmp_bit >= RUWIDO_COMPLETE_DATA_LEN)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to SIEMENS protocol\n");
+#endif // ANALYZE
+ irmp_param.protocol = IRMP_SIEMENS_PROTOCOL; // change protocol
+ irmp_param.address_offset = SIEMENS_ADDRESS_OFFSET;
+ irmp_param.address_end = SIEMENS_ADDRESS_OFFSET + SIEMENS_ADDRESS_LEN;
+ irmp_param.command_offset = SIEMENS_COMMAND_OFFSET;
+ irmp_param.command_end = SIEMENS_COMMAND_OFFSET + SIEMENS_COMMAND_LEN;
+
+ // 76543210
+ // RUWIDO: AAAAAAAAACCCCCCCp
+ // SIEMENS: AAAAAAAAAAACCCCCCCCCCp
+ irmp_tmp_address <<= 2;
+ irmp_tmp_address |= (irmp_tmp_command >> 6);
+ irmp_tmp_command &= 0x003F;
+// irmp_tmp_command <<= 4;
+ irmp_tmp_command |= last_value;
+ }
+ }
+ else
+#endif
+#if IRMP_SUPPORT_ROOMBA_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_ROOMBA_PROTOCOL && // Roomba has no stop bit
+ irmp_bit >= ROOMBA_COMPLETE_DATA_LEN - 1) // it's the last data bit...
+ { // break and close this frame
+ if (irmp_pulse_time >= ROOMBA_1_PULSE_LEN_MIN && irmp_pulse_time <= ROOMBA_1_PULSE_LEN_MAX)
+ {
+ irmp_pause_time = ROOMBA_1_PAUSE_LEN_EXACT;
+ }
+ else if (irmp_pulse_time >= ROOMBA_0_PULSE_LEN_MIN && irmp_pulse_time <= ROOMBA_0_PULSE_LEN_MAX)
+ {
+ irmp_pause_time = ROOMBA_0_PAUSE_LEN;
+ }
+
+ got_light = TRUE; // this is a lie, but helps (generates stop bit)
+ }
+ else
+#endif
+#if IRMP_SUPPORT_MANCHESTER == 1
+ if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER) &&
+ irmp_pause_time >= 2 * irmp_param.pause_1_len_max && irmp_bit >= irmp_param.complete_len - 2 && !irmp_param.stop_bit)
+ { // special manchester decoder
+ got_light = TRUE; // this is a lie, but generates a stop bit ;-)
+ irmp_param.stop_bit = TRUE; // set flag
+ }
+ else
+#endif // IRMP_SUPPORT_MANCHESTER == 1
+ if (irmp_pause_time > IRMP_TIMEOUT_LEN) // timeout?
+ { // yes...
+ if (irmp_bit == irmp_param.complete_len - 1 && irmp_param.stop_bit == 0)
+ {
+ irmp_bit++;
+ }
+#if IRMP_SUPPORT_NEC_PROTOCOL == 1
+ else if ((irmp_param.protocol == IRMP_NEC_PROTOCOL || irmp_param.protocol == IRMP_NEC42_PROTOCOL) && irmp_bit == 0)
+ { // it was a non-standard repetition frame
+#ifdef ANALYZE // with 4500us pause instead of 2250us
+ ANALYZE_PRINTF ("Detected non-standard repetition frame, switching to NEC repetition\n");
+#endif // ANALYZE
+ if (key_repetition_len < NEC_FRAME_REPEAT_PAUSE_LEN_MAX)
+ {
+ irmp_param.stop_bit = TRUE; // set flag
+ irmp_param.protocol = IRMP_NEC_PROTOCOL; // switch protocol
+ irmp_param.complete_len = irmp_bit; // patch length: 16 or 17
+ irmp_tmp_address = last_irmp_address; // address is last address
+ irmp_tmp_command = last_irmp_command; // command is last command
+ irmp_flags |= IRMP_FLAG_REPETITION;
+ key_repetition_len = 0;
+ }
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("ignoring NEC repetition frame: timeout occured, key_repetition_len = %d > %d\n",
+ key_repetition_len, NEC_FRAME_REPEAT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_ir_detected = FALSE;
+ }
+ }
+#endif // IRMP_SUPPORT_NEC_PROTOCOL == 1
+#if IRMP_SUPPORT_JVC_PROTOCOL == 1
+ else if (irmp_param.protocol == IRMP_NEC_PROTOCOL && (irmp_bit == 16 || irmp_bit == 17)) // it was a JVC stop bit
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to JVC protocol, irmp_bit = %d\n", irmp_bit);
+#endif // ANALYZE
+ irmp_param.stop_bit = TRUE; // set flag
+ irmp_param.protocol = IRMP_JVC_PROTOCOL; // switch protocol
+ irmp_param.complete_len = irmp_bit; // patch length: 16 or 17
+ irmp_tmp_command = (irmp_tmp_address >> 4); // set command: upper 12 bits are command bits
+ irmp_tmp_address = irmp_tmp_address & 0x000F; // lower 4 bits are address bits
+ irmp_start_bit_detected = 1; // tricky: don't wait for another start bit...
+ }
+#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1
+#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1
+ else if (irmp_param.protocol == IRMP_NEC_PROTOCOL && (irmp_bit == 28 || irmp_bit == 29)) // it was a LGAIR stop bit
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to LGAIR protocol, irmp_bit = %d\n", irmp_bit);
+#endif // ANALYZE
+ irmp_param.stop_bit = TRUE; // set flag
+ irmp_param.protocol = IRMP_LGAIR_PROTOCOL; // switch protocol
+ irmp_param.complete_len = irmp_bit; // patch length: 16 or 17
+ irmp_tmp_command = irmp_lgair_command; // set command: upper 8 bits are command bits
+ irmp_tmp_address = irmp_lgair_address; // lower 4 bits are address bits
+ irmp_start_bit_detected = 1; // tricky: don't wait for another start bit...
+ }
+#endif // IRMP_SUPPORT_LGAIR_PROTOCOL == 1
+
+#if IRMP_SUPPORT_NEC42_PROTOCOL == 1
+#if IRMP_SUPPORT_NEC_PROTOCOL == 1
+ else if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && irmp_bit == 32) // it was a NEC stop bit
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to NEC protocol\n");
+#endif // ANALYZE
+ irmp_param.stop_bit = TRUE; // set flag
+ irmp_param.protocol = IRMP_NEC_PROTOCOL; // switch protocol
+ irmp_param.complete_len = irmp_bit; // patch length: 16 or 17
+
+ // 0123456789ABC0123456789ABC0123456701234567
+ // NEC42: AAAAAAAAAAAAAaaaaaaaaaaaaaCCCCCCCCcccccccc
+ // NEC: AAAAAAAAaaaaaaaaCCCCCCCCcccccccc
+ irmp_tmp_address |= (irmp_tmp_address2 & 0x0007) << 13; // fm 2012-02-13: 12 -> 13
+ irmp_tmp_command = (irmp_tmp_address2 >> 3) | (irmp_tmp_command << 10);
+ }
+#endif // IRMP_SUPPORT_NEC_PROTOCOL == 1
+#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1
+ else if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && irmp_bit == 28) // it was a NEC stop bit
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to LGAIR protocol\n");
+#endif // ANALYZE
+ irmp_param.stop_bit = TRUE; // set flag
+ irmp_param.protocol = IRMP_LGAIR_PROTOCOL; // switch protocol
+ irmp_param.complete_len = irmp_bit; // patch length: 16 or 17
+ irmp_tmp_address = irmp_lgair_address;
+ irmp_tmp_command = irmp_lgair_command;
+ }
+#endif // IRMP_SUPPORT_LGAIR_PROTOCOL == 1
+#if IRMP_SUPPORT_JVC_PROTOCOL == 1
+ else if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && (irmp_bit == 16 || irmp_bit == 17)) // it was a JVC stop bit
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to JVC protocol, irmp_bit = %d\n", irmp_bit);
+#endif // ANALYZE
+ irmp_param.stop_bit = TRUE; // set flag
+ irmp_param.protocol = IRMP_JVC_PROTOCOL; // switch protocol
+ irmp_param.complete_len = irmp_bit; // patch length: 16 or 17
+
+ // 0123456789ABC0123456789ABC0123456701234567
+ // NEC42: AAAAAAAAAAAAAaaaaaaaaaaaaaCCCCCCCCcccccccc
+ // JVC: AAAACCCCCCCCCCCC
+ irmp_tmp_command = (irmp_tmp_address >> 4) | (irmp_tmp_address2 << 9); // set command: upper 12 bits are command bits
+ irmp_tmp_address = irmp_tmp_address & 0x000F; // lower 4 bits are address bits
+ }
+#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1
+#endif // IRMP_SUPPORT_NEC42_PROTOCOL == 1
+
+#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1
+ else if (irmp_param.protocol == IRMP_SAMSUNG48_PROTOCOL && irmp_bit == 32) // it was a SAMSUNG32 stop bit
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to SAMSUNG32 protocol\n");
+#endif // ANALYZE
+ irmp_param.protocol = IRMP_SAMSUNG32_PROTOCOL;
+ irmp_param.command_offset = SAMSUNG32_COMMAND_OFFSET;
+ irmp_param.command_end = SAMSUNG32_COMMAND_OFFSET + SAMSUNG32_COMMAND_LEN;
+ irmp_param.complete_len = SAMSUNG32_COMPLETE_DATA_LEN;
+ }
+#endif // IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
+
+#if IRMP_SUPPORT_RCMM_PROTOCOL == 1
+ else if (irmp_param.protocol == IRMP_RCMM32_PROTOCOL && (irmp_bit == 12 || irmp_bit == 24)) // it was a RCMM stop bit
+ {
+ if (irmp_bit == 12)
+ {
+ irmp_tmp_command = (irmp_tmp_address & 0xFF); // set command: lower 8 bits are command bits
+ irmp_tmp_address >>= 8; // upper 4 bits are address bits
+
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to RCMM12 protocol, irmp_bit = %d\n", irmp_bit);
+#endif // ANALYZE
+ irmp_param.protocol = IRMP_RCMM12_PROTOCOL; // switch protocol
+ }
+ else // if ((irmp_bit == 24)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to RCMM24 protocol, irmp_bit = %d\n", irmp_bit);
+#endif // ANALYZE
+ irmp_param.protocol = IRMP_RCMM24_PROTOCOL; // switch protocol
+ }
+ irmp_param.stop_bit = TRUE; // set flag
+ irmp_param.complete_len = irmp_bit; // patch length
+ }
+#endif // IRMP_SUPPORT_RCMM_PROTOCOL == 1
+
+#if IRMP_SUPPORT_TECHNICS_PROTOCOL == 1
+ else if (irmp_param.protocol == IRMP_MATSUSHITA_PROTOCOL && irmp_bit == 22) // it was a TECHNICS stop bit
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to TECHNICS protocol, irmp_bit = %d\n", irmp_bit);
+#endif // ANALYZE
+ // Situation:
+ // The first 12 bits have been stored in irmp_tmp_command (LSB first)
+ // The following 10 bits have been stored in irmp_tmp_address (LSB first)
+ // The code of TECHNICS is:
+ // cccccccccccCCCCCCCCCCC (11 times c and 11 times C)
+ // ccccccccccccaaaaaaaaaa
+ // where C is inverted value of c
+
+ irmp_tmp_address <<= 1;
+ if (irmp_tmp_command & (1<<11))
+ {
+ irmp_tmp_address |= 1;
+ irmp_tmp_command &= ~(1<<11);
+ }
+
+ if (irmp_tmp_command == ((~irmp_tmp_address) & 0x07FF))
+ {
+ irmp_tmp_address = 0;
+
+ irmp_param.protocol = IRMP_TECHNICS_PROTOCOL; // switch protocol
+ irmp_param.complete_len = irmp_bit; // patch length
+ }
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("error 8: TECHNICS frame error\n");
+ ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
+#endif // ANALYZE
+ irmp_start_bit_detected = 0; // wait for another start bit...
+ irmp_pulse_time = 0;
+ irmp_pause_time = 0;
+ }
+ }
+#endif // IRMP_SUPPORT_TECHNICS_PROTOCOL == 1
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("error 2: pause %d after data bit %d too long\n", irmp_pause_time, irmp_bit);
+ ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
+#endif // ANALYZE
+ irmp_start_bit_detected = 0; // wait for another start bit...
+ irmp_pulse_time = 0;
+ irmp_pause_time = 0;
+ }
+ }
+ }
+ }
+ else
+ { // got light now!
+ got_light = TRUE;
+ }
+
+ if (got_light)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);
+#endif // ANALYZE
+
+#if IRMP_SUPPORT_MANCHESTER == 1
+ if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER)) // Manchester
+ {
+#if IRMP_SUPPORT_MERLIN_PROTOCOL == 1
+ if (irmp_param.complete_len == irmp_bit && irmp_param.protocol == IRMP_MERLIN_PROTOCOL)
+ {
+ if (last_value == 0)
+ {
+ if (irmp_pulse_time >= 2 * irmp_param.pulse_1_len_min && irmp_pulse_time <= 2 * irmp_param.pulse_1_len_max &&
+ last_pause >= irmp_param.pause_1_len_min && last_pause <= irmp_param.pulse_1_len_max)
+ {
+ irmp_param.complete_len += 2;
+ irmp_store_bit(0);
+ irmp_store_bit(1);
+ }
+ }
+ else
+ {
+ if (last_pause >= 2 * irmp_param.pause_1_len_min && last_pause <= 2 * irmp_param.pulse_1_len_max)
+ {
+ if (irmp_pulse_time >= irmp_param.pulse_1_len_min && irmp_pulse_time <= irmp_param.pulse_1_len_max)
+ {
+ irmp_param.complete_len++;
+ irmp_store_bit(0);
+ }
+ else if (irmp_pulse_time >= 2 * irmp_param.pulse_1_len_min && irmp_pulse_time <= 2 * irmp_param.pulse_1_len_max)
+ {
+ irmp_param.complete_len += 2;
+ irmp_store_bit(0);
+ irmp_store_bit(1);
+ }
+ }
+ }
+ }
+ else
+#endif
+#if 1
+ if (irmp_pulse_time > irmp_param.pulse_1_len_max /* && irmp_pulse_time <= 2 * irmp_param.pulse_1_len_max */)
+#else // better, but some IR-RCs use asymmetric timings :-/
+ if (irmp_pulse_time > irmp_param.pulse_1_len_max && irmp_pulse_time <= 2 * irmp_param.pulse_1_len_max &&
+ irmp_pause_time <= 2 * irmp_param.pause_1_len_max)
+#endif
+ {
+#if IRMP_SUPPORT_RC6_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_bit == 4 && irmp_pulse_time > RC6_TOGGLE_BIT_LEN_MIN) // RC6 toggle bit
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('T');
+#endif // ANALYZE
+ if (irmp_param.complete_len == RC6_COMPLETE_DATA_LEN_LONG) // RC6 mode 6A
+ {
+ irmp_store_bit (1);
+ last_value = 1;
+ }
+ else // RC6 mode 0
+ {
+ irmp_store_bit (0);
+ last_value = 0;
+ }
+#ifdef ANALYZE
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ }
+ else
+#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '0' : '1');
+#endif // ANALYZE
+ irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 0 : 1 );
+
+#if IRMP_SUPPORT_RC6_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_bit == 4 && irmp_pulse_time > RC6_TOGGLE_BIT_LEN_MIN) // RC6 toggle bit
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('T');
+#endif // ANALYZE
+ irmp_store_bit (1);
+
+ if (irmp_pause_time > 2 * irmp_param.pause_1_len_max)
+ {
+ last_value = 0;
+ }
+ else
+ {
+ last_value = 1;
+ }
+#ifdef ANALYZE
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ }
+ else
+#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '1' : '0');
+#endif // ANALYZE
+ irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 1 : 0 );
+
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_RCII_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)
+ if (! irmp_param2.protocol)
+#endif
+ {
+#ifdef ANALYZE
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ }
+ last_value = (irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 1 : 0;
+ }
+ }
+ }
+ else if (irmp_pulse_time >= irmp_param.pulse_1_len_min && irmp_pulse_time <= irmp_param.pulse_1_len_max
+ /* && irmp_pause_time <= 2 * irmp_param.pause_1_len_max */)
+ {
+ uint_fast8_t manchester_value;
+
+ if (last_pause > irmp_param.pause_1_len_max && last_pause <= 2 * irmp_param.pause_1_len_max)
+ {
+ manchester_value = last_value ? 0 : 1;
+ last_value = manchester_value;
+ }
+ else
+ {
+ manchester_value = last_value;
+ }
+
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR (manchester_value + '0');
+#endif // ANALYZE
+
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)
+ if (! irmp_param2.protocol)
+#endif
+ {
+#ifdef ANALYZE
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ }
+
+#if IRMP_SUPPORT_RC6_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_bit == 1 && manchester_value == 1) // RC6 mode != 0 ???
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to RC6A protocol\n");
+#endif // ANALYZE
+ irmp_param.complete_len = RC6_COMPLETE_DATA_LEN_LONG;
+ irmp_param.address_offset = 5;
+ irmp_param.address_end = irmp_param.address_offset + 15;
+ irmp_param.command_offset = irmp_param.address_end + 1; // skip 1 system bit, changes like a toggle bit
+ irmp_param.command_end = irmp_param.command_offset + 16 - 1;
+ irmp_tmp_address = 0;
+ }
+#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1
+
+ irmp_store_bit (manchester_value);
+ }
+ else
+ {
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_FDC_PROTOCOL == 1
+ if (irmp_param2.protocol == IRMP_FDC_PROTOCOL &&
+ irmp_pulse_time >= FDC_PULSE_LEN_MIN && irmp_pulse_time <= FDC_PULSE_LEN_MAX &&
+ ((irmp_pause_time >= FDC_1_PAUSE_LEN_MIN && irmp_pause_time <= FDC_1_PAUSE_LEN_MAX) ||
+ (irmp_pause_time >= FDC_0_PAUSE_LEN_MIN && irmp_pause_time <= FDC_0_PAUSE_LEN_MAX)))
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('?');
+#endif // ANALYZE
+ irmp_param.protocol = 0; // switch to FDC, see below
+ }
+ else
+#endif // IRMP_SUPPORT_FDC_PROTOCOL == 1
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_RCCAR_PROTOCOL == 1
+ if (irmp_param2.protocol == IRMP_RCCAR_PROTOCOL &&
+ irmp_pulse_time >= RCCAR_PULSE_LEN_MIN && irmp_pulse_time <= RCCAR_PULSE_LEN_MAX &&
+ ((irmp_pause_time >= RCCAR_1_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_1_PAUSE_LEN_MAX) ||
+ (irmp_pause_time >= RCCAR_0_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_0_PAUSE_LEN_MAX)))
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('?');
+#endif // ANALYZE
+ irmp_param.protocol = 0; // switch to RCCAR, see below
+ }
+ else
+#endif // IRMP_SUPPORT_RCCAR_PROTOCOL == 1
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('?');
+ ANALYZE_NEWLINE ();
+ ANALYZE_PRINTF ("error 3 manchester: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);
+ ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
+#endif // ANALYZE
+ irmp_start_bit_detected = 0; // reset flags and wait for next start bit
+ irmp_pause_time = 0;
+ }
+ }
+
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_FDC_PROTOCOL == 1
+ if (irmp_param2.protocol == IRMP_FDC_PROTOCOL && irmp_pulse_time >= FDC_PULSE_LEN_MIN && irmp_pulse_time <= FDC_PULSE_LEN_MAX)
+ {
+ if (irmp_pause_time >= FDC_1_PAUSE_LEN_MIN && irmp_pause_time <= FDC_1_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF (" 1 (FDC)\n");
+#endif // ANALYZE
+ irmp_store_bit2 (1);
+ }
+ else if (irmp_pause_time >= FDC_0_PAUSE_LEN_MIN && irmp_pause_time <= FDC_0_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF (" 0 (FDC)\n");
+#endif // ANALYZE
+ irmp_store_bit2 (0);
+ }
+
+ if (! irmp_param.protocol)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to FDC protocol\n");
+#endif // ANALYZE
+ memcpy (&irmp_param, &irmp_param2, sizeof (IRMP_PARAMETER));
+ irmp_param2.protocol = 0;
+ irmp_tmp_address = irmp_tmp_address2;
+ irmp_tmp_command = irmp_tmp_command2;
+ }
+ }
+#endif // IRMP_SUPPORT_FDC_PROTOCOL == 1
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_RCCAR_PROTOCOL == 1
+ if (irmp_param2.protocol == IRMP_RCCAR_PROTOCOL && irmp_pulse_time >= RCCAR_PULSE_LEN_MIN && irmp_pulse_time <= RCCAR_PULSE_LEN_MAX)
+ {
+ if (irmp_pause_time >= RCCAR_1_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_1_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF (" 1 (RCCAR)\n");
+#endif // ANALYZE
+ irmp_store_bit2 (1);
+ }
+ else if (irmp_pause_time >= RCCAR_0_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_0_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF (" 0 (RCCAR)\n");
+#endif // ANALYZE
+ irmp_store_bit2 (0);
+ }
+
+ if (! irmp_param.protocol)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to RCCAR protocol\n");
+#endif // ANALYZE
+ memcpy (&irmp_param, &irmp_param2, sizeof (IRMP_PARAMETER));
+ irmp_param2.protocol = 0;
+ irmp_tmp_address = irmp_tmp_address2;
+ irmp_tmp_command = irmp_tmp_command2;
+ }
+ }
+#endif // IRMP_SUPPORT_RCCAR_PROTOCOL == 1
+
+ last_pause = irmp_pause_time;
+ wait_for_space = 0;
+ }
+ else
+#endif // IRMP_SUPPORT_MANCHESTER == 1
+
+#if IRMP_SUPPORT_SERIAL == 1
+ if (irmp_param.flags & IRMP_PARAM_FLAG_IS_SERIAL)
+ {
+ while (irmp_bit < irmp_param.complete_len && irmp_pulse_time > irmp_param.pulse_1_len_max)
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('1');
+#endif // ANALYZE
+ irmp_store_bit (1);
+
+ if (irmp_pulse_time >= irmp_param.pulse_1_len_min)
+ {
+ irmp_pulse_time -= irmp_param.pulse_1_len_min;
+ }
+ else
+ {
+ irmp_pulse_time = 0;
+ }
+ }
+
+ while (irmp_bit < irmp_param.complete_len && irmp_pause_time > irmp_param.pause_1_len_max)
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('0');
+#endif // ANALYZE
+ irmp_store_bit (0);
+
+ if (irmp_pause_time >= irmp_param.pause_1_len_min)
+ {
+ irmp_pause_time -= irmp_param.pause_1_len_min;
+ }
+ else
+ {
+ irmp_pause_time = 0;
+ }
+ }
+#ifdef ANALYZE
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ wait_for_space = 0;
+ }
+ else
+#endif // IRMP_SUPPORT_SERIAL == 1
+
+#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_SAMSUNG_PROTOCOL && irmp_bit == 16) // Samsung: 16th bit
+ {
+ if (irmp_pulse_time >= SAMSUNG_PULSE_LEN_MIN && irmp_pulse_time <= SAMSUNG_PULSE_LEN_MAX &&
+ irmp_pause_time >= SAMSUNG_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SAMSUNG_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("SYNC\n");
+#endif // ANALYZE
+ wait_for_space = 0;
+ irmp_bit++;
+ }
+ else if (irmp_pulse_time >= SAMSUNG_PULSE_LEN_MIN && irmp_pulse_time <= SAMSUNG_PULSE_LEN_MAX)
+ {
+#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to SAMSUNG48 protocol ");
+#endif // ANALYZE
+ irmp_param.protocol = IRMP_SAMSUNG48_PROTOCOL;
+ irmp_param.command_offset = SAMSUNG48_COMMAND_OFFSET;
+ irmp_param.command_end = SAMSUNG48_COMMAND_OFFSET + SAMSUNG48_COMMAND_LEN;
+ irmp_param.complete_len = SAMSUNG48_COMPLETE_DATA_LEN;
+#else
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to SAMSUNG32 protocol ");
+#endif // ANALYZE
+ irmp_param.protocol = IRMP_SAMSUNG32_PROTOCOL;
+ irmp_param.command_offset = SAMSUNG32_COMMAND_OFFSET;
+ irmp_param.command_end = SAMSUNG32_COMMAND_OFFSET + SAMSUNG32_COMMAND_LEN;
+ irmp_param.complete_len = SAMSUNG32_COMPLETE_DATA_LEN;
+#endif
+ if (irmp_pause_time >= SAMSUNG_1_PAUSE_LEN_MIN && irmp_pause_time <= SAMSUNG_1_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('1');
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ irmp_store_bit (1);
+ wait_for_space = 0;
+ }
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('0');
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ irmp_store_bit (0);
+ wait_for_space = 0;
+ }
+ }
+ else
+ { // timing incorrect!
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("error 3 Samsung: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);
+ ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
+#endif // ANALYZE
+ irmp_start_bit_detected = 0; // reset flags and wait for next start bit
+ irmp_pause_time = 0;
+ }
+ }
+ else
+#endif // IRMP_SUPPORT_SAMSUNG_PROTOCOL
+
+#if IRMP_SUPPORT_NEC16_PROTOCOL
+#if IRMP_SUPPORT_NEC42_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_NEC42_PROTOCOL &&
+#else // IRMP_SUPPORT_NEC_PROTOCOL instead
+ if (irmp_param.protocol == IRMP_NEC_PROTOCOL &&
+#endif // IRMP_SUPPORT_NEC42_PROTOCOL == 1
+ irmp_bit == 8 && irmp_pause_time >= NEC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NEC_START_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Switching to NEC16 protocol\n");
+#endif // ANALYZE
+ irmp_param.protocol = IRMP_NEC16_PROTOCOL;
+ irmp_param.address_offset = NEC16_ADDRESS_OFFSET;
+ irmp_param.address_end = NEC16_ADDRESS_OFFSET + NEC16_ADDRESS_LEN;
+ irmp_param.command_offset = NEC16_COMMAND_OFFSET;
+ irmp_param.command_end = NEC16_COMMAND_OFFSET + NEC16_COMMAND_LEN;
+ irmp_param.complete_len = NEC16_COMPLETE_DATA_LEN;
+ wait_for_space = 0;
+ }
+ else
+#endif // IRMP_SUPPORT_NEC16_PROTOCOL
+
+#if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_BANG_OLUFSEN_PROTOCOL)
+ {
+ if (irmp_pulse_time >= BANG_OLUFSEN_PULSE_LEN_MIN && irmp_pulse_time <= BANG_OLUFSEN_PULSE_LEN_MAX)
+ {
+ if (irmp_bit == 1) // Bang & Olufsen: 3rd bit
+ {
+ if (irmp_pause_time >= BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("3rd start bit\n");
+#endif // ANALYZE
+ wait_for_space = 0;
+ irmp_bit++;
+ }
+ else
+ { // timing incorrect!
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("error 3a B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);
+ ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
+#endif // ANALYZE
+ irmp_start_bit_detected = 0; // reset flags and wait for next start bit
+ irmp_pause_time = 0;
+ }
+ }
+ else if (irmp_bit == 19) // Bang & Olufsen: trailer bit
+ {
+ if (irmp_pause_time >= BANG_OLUFSEN_TRAILER_BIT_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_TRAILER_BIT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("trailer bit\n");
+#endif // ANALYZE
+ wait_for_space = 0;
+ irmp_bit++;
+ }
+ else
+ { // timing incorrect!
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("error 3b B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);
+ ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
+#endif // ANALYZE
+ irmp_start_bit_detected = 0; // reset flags and wait for next start bit
+ irmp_pause_time = 0;
+ }
+ }
+ else
+ {
+ if (irmp_pause_time >= BANG_OLUFSEN_1_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_1_PAUSE_LEN_MAX)
+ { // pulse & pause timings correct for "1"?
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('1');
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ irmp_store_bit (1);
+ last_value = 1;
+ wait_for_space = 0;
+ }
+ else if (irmp_pause_time >= BANG_OLUFSEN_0_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_0_PAUSE_LEN_MAX)
+ { // pulse & pause timings correct for "0"?
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('0');
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ irmp_store_bit (0);
+ last_value = 0;
+ wait_for_space = 0;
+ }
+ else if (irmp_pause_time >= BANG_OLUFSEN_R_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_R_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR (last_value + '0');
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ irmp_store_bit (last_value);
+ wait_for_space = 0;
+ }
+ else
+ { // timing incorrect!
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("error 3c B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);
+ ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
+#endif // ANALYZE
+ irmp_start_bit_detected = 0; // reset flags and wait for next start bit
+ irmp_pause_time = 0;
+ }
+ }
+ }
+ else
+ { // timing incorrect!
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("error 3d B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);
+ ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
+#endif // ANALYZE
+ irmp_start_bit_detected = 0; // reset flags and wait for next start bit
+ irmp_pause_time = 0;
+ }
+ }
+ else
+#endif // IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL
+
+#if IRMP_SUPPORT_RCMM_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_RCMM32_PROTOCOL)
+ {
+ if (irmp_pause_time >= RCMM32_BIT_00_PAUSE_LEN_MIN && irmp_pause_time <= RCMM32_BIT_00_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('0');
+ ANALYZE_PUTCHAR ('0');
+#endif // ANALYZE
+ irmp_store_bit (0);
+ irmp_store_bit (0);
+ }
+ else if (irmp_pause_time >= RCMM32_BIT_01_PAUSE_LEN_MIN && irmp_pause_time <= RCMM32_BIT_01_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('0');
+ ANALYZE_PUTCHAR ('1');
+#endif // ANALYZE
+ irmp_store_bit (0);
+ irmp_store_bit (1);
+ }
+ else if (irmp_pause_time >= RCMM32_BIT_10_PAUSE_LEN_MIN && irmp_pause_time <= RCMM32_BIT_10_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('1');
+ ANALYZE_PUTCHAR ('0');
+#endif // ANALYZE
+ irmp_store_bit (1);
+ irmp_store_bit (0);
+ }
+ else if (irmp_pause_time >= RCMM32_BIT_11_PAUSE_LEN_MIN && irmp_pause_time <= RCMM32_BIT_11_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('1');
+ ANALYZE_PUTCHAR ('1');
+#endif // ANALYZE
+ irmp_store_bit (1);
+ irmp_store_bit (1);
+ }
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("\n");
+#endif // ANALYZE
+ wait_for_space = 0;
+ }
+ else
+#endif
+
+ if (irmp_pulse_time >= irmp_param.pulse_1_len_min && irmp_pulse_time <= irmp_param.pulse_1_len_max &&
+ irmp_pause_time >= irmp_param.pause_1_len_min && irmp_pause_time <= irmp_param.pause_1_len_max)
+ { // pulse & pause timings correct for "1"?
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('1');
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ irmp_store_bit (1);
+ wait_for_space = 0;
+ }
+ else if (irmp_pulse_time >= irmp_param.pulse_0_len_min && irmp_pulse_time <= irmp_param.pulse_0_len_max &&
+ irmp_pause_time >= irmp_param.pause_0_len_min && irmp_pause_time <= irmp_param.pause_0_len_max)
+ { // pulse & pause timings correct for "0"?
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('0');
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ irmp_store_bit (0);
+ wait_for_space = 0;
+ }
+ else
+#if IRMP_SUPPORT_KATHREIN_PROTOCOL
+
+ if (irmp_param.protocol == IRMP_KATHREIN_PROTOCOL &&
+ irmp_pulse_time >= KATHREIN_1_PULSE_LEN_MIN && irmp_pulse_time <= KATHREIN_1_PULSE_LEN_MAX &&
+ (((irmp_bit == 8 || irmp_bit == 6) &&
+ irmp_pause_time >= KATHREIN_SYNC_BIT_PAUSE_LEN_MIN && irmp_pause_time <= KATHREIN_SYNC_BIT_PAUSE_LEN_MAX) ||
+ (irmp_bit == 12 &&
+ irmp_pause_time >= KATHREIN_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= KATHREIN_START_BIT_PAUSE_LEN_MAX)))
+
+ {
+ if (irmp_bit == 8)
+ {
+ irmp_bit++;
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('S');
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ irmp_tmp_command <<= 1;
+ }
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_PUTCHAR ('S');
+ ANALYZE_NEWLINE ();
+#endif // ANALYZE
+ irmp_store_bit (1);
+ }
+ wait_for_space = 0;
+ }
+ else
+#endif // IRMP_SUPPORT_KATHREIN_PROTOCOL
+ { // timing incorrect!
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("error 3: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);
+ ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
+#endif // ANALYZE
+ irmp_start_bit_detected = 0; // reset flags and wait for next start bit
+ irmp_pause_time = 0;
+ }
+
+ irmp_pulse_time = 1; // set counter to 1, not 0
+ }
+ }
+ else
+ { // counting the pulse length ...
+ if (! irmp_input) // still light?
+ { // yes...
+ irmp_pulse_time++; // increment counter
+ }
+ else
+ { // now it's dark!
+ wait_for_space = 1; // let's count the time (see above)
+ irmp_pause_time = 1; // set pause counter to 1, not 0
+
+#if IRMP_SUPPORT_RCII_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_RCII_PROTOCOL && waiting_for_2nd_pulse)
+ {
+printf ("fm: %d %d\n", irmp_pulse_time * 1000000 / F_INTERRUPTS, RCII_BIT_LEN * 1000000 / F_INTERRUPTS); // fm: Ausgabe ist "1000 466" oder "1533 466"
+#if 0
+ if (irmp_pulse_time >= RCII_BIT_LEN)
+ {
+ irmp_pulse_time -= RCII_BIT_LEN;
+ last_value = 0;
+ }
+ else
+ {
+ last_value = 1;
+ }
+#else // fm: das reicht für RCII
+ irmp_pulse_time -= RCII_BIT_LEN;
+ last_value = 0;
+#endif
+
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("RCII: got 2nd pulse, irmp_pulse_time = %d\n", irmp_pulse_time);
+#endif
+ waiting_for_2nd_pulse = 0;
+ }
+#endif
+ }
+ }
+
+ if (irmp_start_bit_detected && irmp_bit == irmp_param.complete_len && irmp_param.stop_bit == 0) // enough bits received?
+ {
+ if (last_irmp_command == irmp_tmp_command && key_repetition_len < AUTO_FRAME_REPETITION_LEN)
+ {
+ repetition_frame_number++;
+ }
+ else
+ {
+ repetition_frame_number = 0;
+ }
+
+#if IRMP_SUPPORT_SIRCS_PROTOCOL == 1
+ // if SIRCS protocol and the code will be repeated within 50 ms, we will ignore 2nd and 3rd repetition frame
+ if (irmp_param.protocol == IRMP_SIRCS_PROTOCOL && (repetition_frame_number == 1 || repetition_frame_number == 2))
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("code skipped: SIRCS auto repetition frame #%d, counter = %d, auto repetition len = %d\n",
+ repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);
+#endif // ANALYZE
+ key_repetition_len = 0;
+ }
+ else
+#endif
+
+#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1
+ // if ORTEK protocol and the code will be repeated within 50 ms, we will ignore 2nd repetition frame
+ if (irmp_param.protocol == IRMP_ORTEK_PROTOCOL && repetition_frame_number == 1)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("code skipped: ORTEK auto repetition frame #%d, counter = %d, auto repetition len = %d\n",
+ repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);
+#endif // ANALYZE
+ key_repetition_len = 0;
+ }
+ else
+#endif
+
+#if 0 && IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1 // fm 2015-12-02: don't ignore every 2nd frame
+ // if KASEIKYO protocol and the code will be repeated within 50 ms, we will ignore 2nd repetition frame
+ if (irmp_param.protocol == IRMP_KASEIKYO_PROTOCOL && repetition_frame_number == 1)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("code skipped: KASEIKYO auto repetition frame #%d, counter = %d, auto repetition len = %d\n",
+ repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);
+#endif // ANALYZE
+ key_repetition_len = 0;
+ }
+ else
+#endif
+
+#if 0 && IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1 // fm 2015-12-02: don't ignore every 2nd frame
+ // if SAMSUNG32 or SAMSUNG48 protocol and the code will be repeated within 50 ms, we will ignore every 2nd frame
+ if ((irmp_param.protocol == IRMP_SAMSUNG32_PROTOCOL || irmp_param.protocol == IRMP_SAMSUNG48_PROTOCOL) && (repetition_frame_number & 0x01))
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("code skipped: SAMSUNG32/SAMSUNG48 auto repetition frame #%d, counter = %d, auto repetition len = %d\n",
+ repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);
+#endif // ANALYZE
+ key_repetition_len = 0;
+ }
+ else
+#endif
+
+#if IRMP_SUPPORT_NUBERT_PROTOCOL == 1
+ // if NUBERT protocol and the code will be repeated within 50 ms, we will ignore every 2nd frame
+ if (irmp_param.protocol == IRMP_NUBERT_PROTOCOL && (repetition_frame_number & 0x01))
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("code skipped: NUBERT auto repetition frame #%d, counter = %d, auto repetition len = %d\n",
+ repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);
+#endif // ANALYZE
+ key_repetition_len = 0;
+ }
+ else
+#endif
+
+#if IRMP_SUPPORT_SPEAKER_PROTOCOL == 1
+ // if SPEAKER protocol and the code will be repeated within 50 ms, we will ignore every 2nd frame
+ if (irmp_param.protocol == IRMP_SPEAKER_PROTOCOL && (repetition_frame_number & 0x01))
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("code skipped: SPEAKER auto repetition frame #%d, counter = %d, auto repetition len = %d\n",
+ repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);
+#endif // ANALYZE
+ key_repetition_len = 0;
+ }
+ else
+#endif
+
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("%8.3fms code detected, length = %d\n", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit);
+#endif // ANALYZE
+ irmp_ir_detected = TRUE;
+
+#if IRMP_SUPPORT_DENON_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_DENON_PROTOCOL)
+ { // check for repetition frame
+ if ((~irmp_tmp_command & 0x3FF) == last_irmp_denon_command) // command bits must be inverted
+ {
+ irmp_tmp_command = last_irmp_denon_command; // use command received before!
+ last_irmp_denon_command = 0;
+
+ irmp_protocol = irmp_param.protocol; // store protocol
+ irmp_address = irmp_tmp_address; // store address
+ irmp_command = irmp_tmp_command; // store command
+ }
+ else
+ {
+ if ((irmp_tmp_command & 0x01) == 0x00)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("%8.3fms info Denon: waiting for inverted command repetition\n", (double) (time_counter * 1000) / F_INTERRUPTS);
+#endif // ANALYZE
+ last_irmp_denon_command = irmp_tmp_command;
+ denon_repetition_len = 0;
+ irmp_ir_detected = FALSE;
+ }
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("%8.3fms warning Denon: got unexpected inverted command, ignoring it\n", (double) (time_counter * 1000) / F_INTERRUPTS);
+#endif // ANALYZE
+ last_irmp_denon_command = 0;
+ irmp_ir_detected = FALSE;
+ }
+ }
+ }
+ else
+#endif // IRMP_SUPPORT_DENON_PROTOCOL
+
+#if IRMP_SUPPORT_GRUNDIG_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_GRUNDIG_PROTOCOL && irmp_tmp_command == 0x01ff)
+ { // Grundig start frame?
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Detected GRUNDIG start frame, ignoring it\n");
+#endif // ANALYZE
+ irmp_ir_detected = FALSE;
+ }
+ else
+#endif // IRMP_SUPPORT_GRUNDIG_PROTOCOL
+
+#if IRMP_SUPPORT_NOKIA_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_NOKIA_PROTOCOL && irmp_tmp_address == 0x00ff && irmp_tmp_command == 0x00fe)
+ { // Nokia start frame?
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Detected NOKIA start frame, ignoring it\n");
+#endif // ANALYZE
+ irmp_ir_detected = FALSE;
+ }
+ else
+#endif // IRMP_SUPPORT_NOKIA_PROTOCOL
+ {
+#if IRMP_SUPPORT_NEC_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_NEC_PROTOCOL && irmp_bit == 0) // repetition frame
+ {
+ if (key_repetition_len < NEC_FRAME_REPEAT_PAUSE_LEN_MAX)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Detected NEC repetition frame, key_repetition_len = %d\n", key_repetition_len);
+ ANALYZE_ONLY_NORMAL_PRINTF("REPETETION FRAME ");
+#endif // ANALYZE
+ irmp_tmp_address = last_irmp_address; // address is last address
+ irmp_tmp_command = last_irmp_command; // command is last command
+ irmp_flags |= IRMP_FLAG_REPETITION;
+ key_repetition_len = 0;
+ }
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("Detected NEC repetition frame, ignoring it: timeout occured, key_repetition_len = %d > %d\n",
+ key_repetition_len, NEC_FRAME_REPEAT_PAUSE_LEN_MAX);
+#endif // ANALYZE
+ irmp_ir_detected = FALSE;
+ }
+ }
+#endif // IRMP_SUPPORT_NEC_PROTOCOL
+
+#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_KASEIKYO_PROTOCOL)
+ {
+ uint_fast8_t xor_value;
+
+ xor_value = (xor_check[0] & 0x0F) ^ ((xor_check[0] & 0xF0) >> 4) ^ (xor_check[1] & 0x0F) ^ ((xor_check[1] & 0xF0) >> 4);
+
+ if (xor_value != (xor_check[2] & 0x0F))
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("error 4: wrong XOR check for customer id: 0x%1x 0x%1x\n", xor_value, xor_check[2] & 0x0F);
+#endif // ANALYZE
+ irmp_ir_detected = FALSE;
+ }
+
+ xor_value = xor_check[2] ^ xor_check[3] ^ xor_check[4];
+
+ if (xor_value != xor_check[5])
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("error 5: wrong XOR check for data bits: 0x%02x 0x%02x\n", xor_value, xor_check[5]);
+#endif // ANALYZE
+ irmp_ir_detected = FALSE;
+ }
+
+ irmp_flags |= genre2; // write the genre2 bits into MSB of the flag byte
+ }
+#endif // IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
+
+#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_ORTEK_PROTOCOL)
+ {
+ if (parity == PARITY_CHECK_FAILED)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("error 6: parity check failed\n");
+#endif // ANALYZE
+ irmp_ir_detected = FALSE;
+ }
+
+ if ((irmp_tmp_address & 0x03) == 0x02)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("code skipped: ORTEK end of transmission frame (key release)\n");
+#endif // ANALYZE
+ irmp_ir_detected = FALSE;
+ }
+ irmp_tmp_address >>= 2;
+ }
+#endif // IRMP_SUPPORT_ORTEK_PROTOCOL == 1
+
+#if IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_MITSU_HEAVY_PROTOCOL)
+ {
+ check = irmp_tmp_command >> 8; // inverted upper byte == lower byte?
+ check = ~ check;
+ if (check == (irmp_tmp_command & 0xFF)) { //ok:
+ irmp_tmp_command &= 0xFF;
+ }
+ else mitsu_parity = PARITY_CHECK_FAILED;
+ if (mitsu_parity == PARITY_CHECK_FAILED)
+ {
+#ifdef ANALYZE
+ ANALYZE_PRINTF ("error 7: parity check failed\n");
+#endif // ANALYZE
+ irmp_ir_detected = FALSE;
+ }
+ }
+#endif // IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL
+
+#if IRMP_SUPPORT_RC6_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_param.complete_len == RC6_COMPLETE_DATA_LEN_LONG) // RC6 mode = 6?
+ {
+ irmp_protocol = IRMP_RC6A_PROTOCOL;
+ }
+ else
+#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1
+ {
+ irmp_protocol = irmp_param.protocol;
+ }
+
+#if IRMP_SUPPORT_FDC_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_FDC_PROTOCOL)
+ {
+ if (irmp_tmp_command & 0x000F) // released key?
+ {
+ irmp_tmp_command = (irmp_tmp_command >> 4) | 0x80; // yes, set bit 7
+ }
+ else
+ {
+ irmp_tmp_command >>= 4; // no, it's a pressed key
+ }
+ irmp_tmp_command |= (irmp_tmp_address << 2) & 0x0F00; // 000000CCCCAAAAAA -> 0000CCCC00000000
+ irmp_tmp_address &= 0x003F;
+ }
+#endif
+
+ irmp_address = irmp_tmp_address; // store address
+#if IRMP_SUPPORT_NEC_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_NEC_PROTOCOL)
+ {
+ last_irmp_address = irmp_tmp_address; // store as last address, too
+ }
+#endif
+
+#if IRMP_SUPPORT_RC5_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_RC5_PROTOCOL)
+ {
+ irmp_tmp_command |= rc5_cmd_bit6; // store bit 6
+ }
+#endif
+#if IRMP_SUPPORT_S100_PROTOCOL == 1
+ if (irmp_param.protocol == IRMP_S100_PROTOCOL)
+ {
+ irmp_tmp_command |= rc5_cmd_bit6; // store bit 6
+ }
+#endif
+ irmp_command = irmp_tmp_command; // store command
+
+#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
+ irmp_id = irmp_tmp_id;
+#endif
+ }
+ }
+
+ if (irmp_ir_detected)
+ {
+ if (last_irmp_command == irmp_tmp_command &&
+ last_irmp_address == irmp_tmp_address &&
+ key_repetition_len < IRMP_KEY_REPETITION_LEN)
+ {
+ irmp_flags |= IRMP_FLAG_REPETITION;
+ }
+
+ last_irmp_address = irmp_tmp_address; // store as last address, too
+ last_irmp_command = irmp_tmp_command; // store as last command, too
+
+ key_repetition_len = 0;
+ }
+ else
+ {
+#ifdef ANALYZE
+ ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
+#endif // ANALYZE
+ }
+
+ irmp_start_bit_detected = 0; // and wait for next start bit
+ irmp_tmp_command = 0;
+ irmp_pulse_time = 0;
+ irmp_pause_time = 0;
+
+#if IRMP_SUPPORT_JVC_PROTOCOL == 1
+ if (irmp_protocol == IRMP_JVC_PROTOCOL) // the stop bit of JVC frame is also start bit of next frame
+ { // set pulse time here!
+ irmp_pulse_time = ((uint_fast8_t)(F_INTERRUPTS * JVC_START_BIT_PULSE_TIME));
+ }
+#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1
+ }
+ }
+ }
+
+#if defined(STELLARIS_ARM_CORTEX_M4)
+ // Clear the timer interrupt
+ TimerIntClear(TIMER1_BASE, TIMER_TIMA_TIMEOUT);
+#endif
+
+#if (defined(_CHIBIOS_RT_) || defined(_CHIBIOS_NIL_)) && IRMP_USE_EVENT == 1
+ if (IRMP_EVENT_THREAD_PTR != NULL && irmp_ir_detected)
+ chEvtSignalI(IRMP_EVENT_THREAD_PTR,IRMP_EVENT_BIT);
+#endif
+
+#if IRMP_USE_IDLE_CALL == 1
+ // check if there is no ongoing transmission or repetition
+ if (!irmp_start_bit_detected && !irmp_pulse_time
+ && key_repetition_len > IRMP_KEY_REPETITION_LEN)
+ {
+ // no ongoing transmission
+ // enough time passed since last decoded signal that a repetition won't affect our output
+
+ irmp_idle();
+ }
+#endif // IRMP_USE_IDLE_CALL
+
+ return (irmp_ir_detected);
+}
+
+#ifdef ANALYZE
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * main functions - for Unix/Linux + Windows only!
+ *
+ * AVR: see main.c!
+ *
+ * Compile it under linux with:
+ * cc irmp.c -o irmp
+ *
+ * usage: ./irmp [-v|-s|-a|-l] < file
+ *
+ * options:
+ * -v verbose
+ * -s silent
+ * -a analyze
+ * -l list pulse/pauses
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+
+void
+print_spectrum (char * text, int * buf, int is_pulse)
+{
+ int i;
+ int j;
+ int min;
+ int max;
+ int max_value = 0;
+ int value;
+ int sum = 0;
+ int counter = 0;
+ double average = 0;
+ double tolerance;
+
+ puts ("-----------------------------------------------------------------------------");
+ printf ("%s:\n", text);
+
+ for (i = 0; i < 256; i++)
+ {
+ if (buf[i] > max_value)
+ {
+ max_value = buf[i];
+ }
+ }
+
+ for (i = 1; i < 200; i++)
+ {
+ if (buf[i] > 0)
+ {
+ printf ("%3d ", i);
+ value = (buf[i] * 60) / max_value;
+
+ for (j = 0; j < value; j++)
+ {
+ putchar ('o');
+ }
+ printf (" %d\n", buf[i]);
+
+ sum += i * buf[i];
+ counter += buf[i];
+ }
+ else
+ {
+ max = i - 1;
+
+ if (counter > 0)
+ {
+ average = (float) sum / (float) counter;
+
+ if (is_pulse)
+ {
+ printf ("pulse ");
+ }
+ else
+ {
+ printf ("pause ");
+ }
+
+ printf ("avg: %4.1f=%6.1f us, ", average, (1000000. * average) / (float) F_INTERRUPTS);
+ printf ("min: %2d=%6.1f us, ", min, (1000000. * min) / (float) F_INTERRUPTS);
+ printf ("max: %2d=%6.1f us, ", max, (1000000. * max) / (float) F_INTERRUPTS);
+
+ tolerance = (max - average);
+
+ if (average - min > tolerance)
+ {
+ tolerance = average - min;
+ }
+
+ tolerance = tolerance * 100 / average;
+ printf ("tol: %4.1f%%\n", tolerance);
+ }
+
+ counter = 0;
+ sum = 0;
+ min = i + 1;
+ }
+ }
+}
+
+#define STATE_LEFT_SHIFT 0x01
+#define STATE_RIGHT_SHIFT 0x02
+#define STATE_LEFT_CTRL 0x04
+#define STATE_LEFT_ALT 0x08
+#define STATE_RIGHT_ALT 0x10
+
+#define KEY_ESCAPE 0x1B // keycode = 0x006e
+#define KEY_MENUE 0x80 // keycode = 0x0070
+#define KEY_BACK 0x81 // keycode = 0x0071
+#define KEY_FORWARD 0x82 // keycode = 0x0072
+#define KEY_ADDRESS 0x83 // keycode = 0x0073
+#define KEY_WINDOW 0x84 // keycode = 0x0074
+#define KEY_1ST_PAGE 0x85 // keycode = 0x0075
+#define KEY_STOP 0x86 // keycode = 0x0076
+#define KEY_MAIL 0x87 // keycode = 0x0077
+#define KEY_FAVORITES 0x88 // keycode = 0x0078
+#define KEY_NEW_PAGE 0x89 // keycode = 0x0079
+#define KEY_SETUP 0x8A // keycode = 0x007a
+#define KEY_FONT 0x8B // keycode = 0x007b
+#define KEY_PRINT 0x8C // keycode = 0x007c
+#define KEY_ON_OFF 0x8E // keycode = 0x007c
+
+#define KEY_INSERT 0x90 // keycode = 0x004b
+#define KEY_DELETE 0x91 // keycode = 0x004c
+#define KEY_LEFT 0x92 // keycode = 0x004f
+#define KEY_HOME 0x93 // keycode = 0x0050
+#define KEY_END 0x94 // keycode = 0x0051
+#define KEY_UP 0x95 // keycode = 0x0053
+#define KEY_DOWN 0x96 // keycode = 0x0054
+#define KEY_PAGE_UP 0x97 // keycode = 0x0055
+#define KEY_PAGE_DOWN 0x98 // keycode = 0x0056
+#define KEY_RIGHT 0x99 // keycode = 0x0059
+#define KEY_MOUSE_1 0x9E // keycode = 0x0400
+#define KEY_MOUSE_2 0x9F // keycode = 0x0800
+
+static uint_fast8_t
+get_fdc_key (uint_fast16_t cmd)
+{
+ static uint8_t key_table[128] =
+ {
+ // 0 1 2 3 4 5 6 7 8 9 A B C D E F
+ 0, '^', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', 0xDF, '´', 0, '\b',
+ '\t', 'q', 'w', 'e', 'r', 't', 'z', 'u', 'i', 'o', 'p', 0xFC, '+', 0, 0, 'a',
+ 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 0xF6, 0xE4, '#', '\r', 0, '<', 'y', 'x',
+ 'c', 'v', 'b', 'n', 'm', ',', '.', '-', 0, 0, 0, 0, 0, ' ', 0, 0,
+
+ 0, '°', '!', '"', '§', '$', '%', '&', '/', '(', ')', '=', '?', '`', 0, '\b',
+ '\t', 'Q', 'W', 'E', 'R', 'T', 'Z', 'U', 'I', 'O', 'P', 0xDC, '*', 0, 0, 'A',
+ 'S', 'D', 'F', 'G', 'H', 'J', 'K', 'L', 0xD6, 0xC4, '\'', '\r', 0, '>', 'Y', 'X',
+ 'C', 'V', 'B', 'N', 'M', ';', ':', '_', 0, 0, 0, 0, 0, ' ', 0, 0
+ };
+ static uint_fast8_t state;
+
+ uint_fast8_t key = 0;
+
+ switch (cmd)
+ {
+ case 0x002C: state |= STATE_LEFT_SHIFT; break; // pressed left shift
+ case 0x00AC: state &= ~STATE_LEFT_SHIFT; break; // released left shift
+ case 0x0039: state |= STATE_RIGHT_SHIFT; break; // pressed right shift
+ case 0x00B9: state &= ~STATE_RIGHT_SHIFT; break; // released right shift
+ case 0x003A: state |= STATE_LEFT_CTRL; break; // pressed left ctrl
+ case 0x00BA: state &= ~STATE_LEFT_CTRL; break; // released left ctrl
+ case 0x003C: state |= STATE_LEFT_ALT; break; // pressed left alt
+ case 0x00BC: state &= ~STATE_LEFT_ALT; break; // released left alt
+ case 0x003E: state |= STATE_RIGHT_ALT; break; // pressed left alt
+ case 0x00BE: state &= ~STATE_RIGHT_ALT; break; // released left alt
+
+ case 0x006e: key = KEY_ESCAPE; break;
+ case 0x004b: key = KEY_INSERT; break;
+ case 0x004c: key = KEY_DELETE; break;
+ case 0x004f: key = KEY_LEFT; break;
+ case 0x0050: key = KEY_HOME; break;
+ case 0x0051: key = KEY_END; break;
+ case 0x0053: key = KEY_UP; break;
+ case 0x0054: key = KEY_DOWN; break;
+ case 0x0055: key = KEY_PAGE_UP; break;
+ case 0x0056: key = KEY_PAGE_DOWN; break;
+ case 0x0059: key = KEY_RIGHT; break;
+ case 0x0400: key = KEY_MOUSE_1; break;
+ case 0x0800: key = KEY_MOUSE_2; break;
+
+ default:
+ {
+ if (!(cmd & 0x80)) // pressed key
+ {
+ if (cmd >= 0x70 && cmd <= 0x7F) // function keys
+ {
+ key = cmd + 0x10; // 7x -> 8x
+ }
+ else if (cmd < 64) // key listed in key_table
+ {
+ if (state & (STATE_LEFT_ALT | STATE_RIGHT_ALT))
+ {
+ switch (cmd)
+ {
+ case 0x0003: key = 0xB2; break; // upper 2
+ case 0x0008: key = '{'; break;
+ case 0x0009: key = '['; break;
+ case 0x000A: key = ']'; break;
+ case 0x000B: key = '}'; break;
+ case 0x000C: key = '\\'; break;
+ case 0x001C: key = '~'; break;
+ case 0x002D: key = '|'; break;
+ case 0x0034: key = 0xB5; break; // Mu
+ }
+ }
+ else if (state & (STATE_LEFT_CTRL))
+ {
+ if (key_table[cmd] >= 'a' && key_table[cmd] <= 'z')
+ {
+ key = key_table[cmd] - 'a' + 1;
+ }
+ else
+ {
+ key = key_table[cmd];
+ }
+ }
+ else
+ {
+ int idx = cmd + ((state & (STATE_LEFT_SHIFT | STATE_RIGHT_SHIFT)) ? 64 : 0);
+
+ if (key_table[idx])
+ {
+ key = key_table[idx];
+ }
+ }
+ }
+ }
+ break;
+ }
+ }
+
+ return (key);
+}
+
+static int analyze = FALSE;
+static int list = FALSE;
+static IRMP_DATA irmp_data;
+static int expected_protocol;
+static int expected_address;
+static int expected_command;
+static int do_check_expected_values;
+
+static void
+next_tick (void)
+{
+ if (! analyze && ! list)
+ {
+ (void) irmp_ISR ();
+
+ if (irmp_get_data (&irmp_data))
+ {
+ uint_fast8_t key;
+
+ ANALYZE_ONLY_NORMAL_PUTCHAR (' ');
+
+ if (verbose)
+ {
+ printf ("%8.3fms ", (double) (time_counter * 1000) / F_INTERRUPTS);
+ }
+
+ if (irmp_data.protocol == IRMP_ACP24_PROTOCOL)
+ {
+ uint16_t temp = (irmp_data.command & 0x000F) + 15;
+
+ printf ("p=%2d (%s), a=0x%04x, c=0x%04x, f=0x%02x, temp=%d",
+ irmp_data.protocol, irmp_protocol_names[irmp_data.protocol], irmp_data.address, irmp_data.command, irmp_data.flags, temp);
+ }
+ else if (irmp_data.protocol == IRMP_FDC_PROTOCOL && (key = get_fdc_key (irmp_data.command)) != 0)
+ {
+ if ((key >= 0x20 && key < 0x7F) || key >= 0xA0)
+ {
+ printf ("p=%2d (%s), a=0x%04x, c=0x%04x, f=0x%02x, asc=0x%02x, key='%c'",
+ irmp_data.protocol, irmp_protocol_names[irmp_data.protocol], irmp_data.address, irmp_data.command, irmp_data.flags, key, key);
+ }
+ else if (key == '\r' || key == '\t' || key == KEY_ESCAPE || (key >= 0x80 && key <= 0x9F)) // function keys
+ {
+ char * p = (char *) NULL;
+
+ switch (key)
+ {
+ case '\t' : p = "TAB"; break;
+ case '\r' : p = "CR"; break;
+ case KEY_ESCAPE : p = "ESCAPE"; break;
+ case KEY_MENUE : p = "MENUE"; break;
+ case KEY_BACK : p = "BACK"; break;
+ case KEY_FORWARD : p = "FORWARD"; break;
+ case KEY_ADDRESS : p = "ADDRESS"; break;
+ case KEY_WINDOW : p = "WINDOW"; break;
+ case KEY_1ST_PAGE : p = "1ST_PAGE"; break;
+ case KEY_STOP : p = "STOP"; break;
+ case KEY_MAIL : p = "MAIL"; break;
+ case KEY_FAVORITES : p = "FAVORITES"; break;
+ case KEY_NEW_PAGE : p = "NEW_PAGE"; break;
+ case KEY_SETUP : p = "SETUP"; break;
+ case KEY_FONT : p = "FONT"; break;
+ case KEY_PRINT : p = "PRINT"; break;
+ case KEY_ON_OFF : p = "ON_OFF"; break;
+
+ case KEY_INSERT : p = "INSERT"; break;
+ case KEY_DELETE : p = "DELETE"; break;
+ case KEY_LEFT : p = "LEFT"; break;
+ case KEY_HOME : p = "HOME"; break;
+ case KEY_END : p = "END"; break;
+ case KEY_UP : p = "UP"; break;
+ case KEY_DOWN : p = "DOWN"; break;
+ case KEY_PAGE_UP : p = "PAGE_UP"; break;
+ case KEY_PAGE_DOWN : p = "PAGE_DOWN"; break;
+ case KEY_RIGHT : p = "RIGHT"; break;
+ case KEY_MOUSE_1 : p = "KEY_MOUSE_1"; break;
+ case KEY_MOUSE_2 : p = "KEY_MOUSE_2"; break;
+ default : p = "<UNKNWON>"; break;
+ }
+
+ printf ("p=%2d (%s), a=0x%04x, c=0x%04x, f=0x%02x, asc=0x%02x, key=%s",
+ irmp_data.protocol, irmp_protocol_names[irmp_data.protocol], irmp_data.address, irmp_data.command, irmp_data.flags, key, p);
+ }
+ else
+ {
+ printf ("p=%2d (%s), a=0x%04x, c=0x%04x, f=0x%02x, asc=0x%02x",
+ irmp_data.protocol, irmp_protocol_names[irmp_data.protocol], irmp_data.address, irmp_data.command, irmp_data.flags, key);
+ }
+ }
+ else
+ {
+ printf ("p=%2d (%s), a=0x%04x, c=0x%04x, f=0x%02x",
+ irmp_data.protocol, irmp_protocol_names[irmp_data.protocol], irmp_data.address, irmp_data.command, irmp_data.flags);
+ }
+
+ if (do_check_expected_values)
+ {
+ if (irmp_data.protocol != expected_protocol ||
+ irmp_data.address != expected_address ||
+ irmp_data.command != expected_command)
+ {
+ printf ("\nerror 7: expected values differ: p=%2d (%s), a=0x%04x, c=0x%04x\n",
+ expected_protocol, irmp_protocol_names[expected_protocol], expected_address, expected_command);
+ }
+ else
+ {
+ printf (" checked!\n");
+ }
+ do_check_expected_values = FALSE; // only check 1st frame in a line!
+ }
+ else
+ {
+ putchar ('\n');
+ }
+ }
+ }
+}
+
+int
+main (int argc, char ** argv)
+{
+ int i;
+ int ch;
+ int last_ch = 0;
+ int pulse = 0;
+ int pause = 0;
+
+ int start_pulses[256];
+ int start_pauses[256];
+ int pulses[256];
+ int pauses[256];
+
+ int first_pulse = TRUE;
+ int first_pause = TRUE;
+
+ if (argc == 2)
+ {
+ if (! strcmp (argv[1], "-v"))
+ {
+ verbose = TRUE;
+ }
+ else if (! strcmp (argv[1], "-l"))
+ {
+ list = TRUE;
+ }
+ else if (! strcmp (argv[1], "-a"))
+ {
+ analyze = TRUE;
+ }
+ else if (! strcmp (argv[1], "-s"))
+ {
+ silent = TRUE;
+ }
+ else if (! strcmp (argv[1], "-r"))
+ {
+ radio = TRUE;
+ }
+ }
+
+ for (i = 0; i < 256; i++)
+ {
+ start_pulses[i] = 0;
+ start_pauses[i] = 0;
+ pulses[i] = 0;
+ pauses[i] = 0;
+ }
+
+ IRMP_PIN = 0xFF;
+
+ while ((ch = getchar ()) != EOF)
+ {
+ if (ch == '_' || ch == '0')
+ {
+ if (last_ch != ch)
+ {
+ if (pause > 0)
+ {
+ if (list)
+ {
+ printf ("pause: %d\n", pause);
+ }
+
+ if (analyze)
+ {
+ if (first_pause)
+ {
+ if (pause < 256)
+ {
+ start_pauses[pause]++;
+ }
+ first_pause = FALSE;
+ }
+ else
+ {
+ if (pause < 256)
+ {
+ pauses[pause]++;
+ }
+ }
+ }
+ }
+ pause = 0;
+ }
+ pulse++;
+ IRMP_PIN = 0x00;
+ }
+ else if (ch == 0xaf || ch == '-' || ch == '1')
+ {
+ if (last_ch != ch)
+ {
+ if (list)
+ {
+ printf ("pulse: %d ", pulse);
+ }
+
+ if (analyze)
+ {
+ if (first_pulse)
+ {
+ if (pulse < 256)
+ {
+ start_pulses[pulse]++;
+ }
+ first_pulse = FALSE;
+ }
+ else
+ {
+ if (pulse < 256)
+ {
+ pulses[pulse]++;
+ }
+ }
+ }
+ pulse = 0;
+ }
+
+ pause++;
+ IRMP_PIN = 0xff;
+ }
+ else if (ch == '\n')
+ {
+ IRMP_PIN = 0xff;
+ time_counter = 0;
+
+ if (list && pause > 0)
+ {
+ printf ("pause: %d\n", pause);
+ }
+ pause = 0;
+
+ if (! analyze)
+ {
+ for (i = 0; i < (int) ((10000.0 * F_INTERRUPTS) / 10000); i++) // newline: long pause of 10000 msec
+ {
+ next_tick ();
+ }
+ }
+ first_pulse = TRUE;
+ first_pause = TRUE;
+ }
+ else if (ch == '#')
+ {
+ time_counter = 0;
+
+ if (analyze)
+ {
+ while ((ch = getchar()) != '\n' && ch != EOF)
+ {
+ ;
+ }
+ }
+ else
+ {
+ char buf[1024];
+ char * p;
+ int idx = -1;
+
+ puts ("----------------------------------------------------------------------");
+ putchar (ch);
+
+
+ while ((ch = getchar()) != '\n' && ch != EOF)
+ {
+ if (ch != '\r') // ignore CR in DOS/Windows files
+ {
+ if (ch == '[' && idx == -1)
+ {
+ idx = 0;
+ }
+ else if (idx >= 0)
+ {
+ if (ch == ']')
+ {
+ do_check_expected_values = FALSE;
+ buf[idx] = '\0';
+ idx = -1;
+
+ expected_protocol = atoi (buf);
+
+ if (expected_protocol > 0)
+ {
+ p = buf;
+ while (*p)
+ {
+ if (*p == 'x')
+ {
+ p++;
+
+ if (sscanf (p, "%x", &expected_address) == 1)
+ {
+ do_check_expected_values = TRUE;
+ }
+ break;
+ }
+ p++;
+ }
+
+ if (do_check_expected_values)
+ {
+ do_check_expected_values = FALSE;
+
+ while (*p)
+ {
+ if (*p == 'x')
+ {
+ p++;
+
+ if (sscanf (p, "%x", &expected_command) == 1)
+ {
+ do_check_expected_values = TRUE;
+ }
+ break;
+ }
+ p++;
+ }
+
+ if (do_check_expected_values)
+ {
+ // printf ("!%2d %04x %04x!\n", expected_protocol, expected_address, expected_command);
+ }
+ }
+ }
+ }
+ else if (idx < 1024 - 2)
+ {
+ buf[idx++] = ch;
+ }
+ }
+ putchar (ch);
+ }
+ }
+ putchar ('\n');
+ }
+
+ }
+
+ last_ch = ch;
+
+ next_tick ();
+ }
+
+ if (analyze)
+ {
+ print_spectrum ("START PULSES", start_pulses, TRUE);
+ print_spectrum ("START PAUSES", start_pauses, FALSE);
+ print_spectrum ("PULSES", pulses, TRUE);
+ print_spectrum ("PAUSES", pauses, FALSE);
+ puts ("-----------------------------------------------------------------------------");
+ }
+ return 0;
+}
+
+#endif // ANALYZE
--- /dev/null
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * irmpprotocols.h - irmp protocols
+ *
+ * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H or IRSND.H!
+ *
+ * Copyright (c) 2013-2019 Frank Meyer - frank(at)fli4l.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+
+#ifndef _IRMP_PROTOCOLS_H_
+#define _IRMP_PROTOCOLS_H_
+
+#if !defined(_IRMP_H_) && !defined(_IRSND_H_)
+# error please include only irmp.h or irsnd.h, not irmpprotocols.h
+#endif
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * IR protocols:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define IRMP_UNKNOWN_PROTOCOL 0 // uknown protocol
+#define IRMP_SIRCS_PROTOCOL 1 // Sony
+#define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc.
+#define IRMP_SAMSUNG_PROTOCOL 3 // Samsung
+#define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita
+#define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc)
+#define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba
+#define IRMP_RC5_PROTOCOL 7 // Philips etc
+#define IRMP_DENON_PROTOCOL 8 // Denon, Sharp
+#define IRMP_RC6_PROTOCOL 9 // Philips etc
+#define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37
+#define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC
+#define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba
+#define IRMP_NUBERT_PROTOCOL 13 // Nubert
+#define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen
+#define IRMP_GRUNDIG_PROTOCOL 15 // Grundig
+#define IRMP_NOKIA_PROTOCOL 16 // Nokia
+#define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset
+#define IRMP_FDC_PROTOCOL 18 // FDC keyboard
+#define IRMP_RCCAR_PROTOCOL 19 // RC Car
+#define IRMP_JVC_PROTOCOL 20 // JVC (NEC with 16 bits)
+#define IRMP_RC6A_PROTOCOL 21 // RC6A, e.g. Kathrein, XBOX
+#define IRMP_NIKON_PROTOCOL 22 // Nikon
+#define IRMP_RUWIDO_PROTOCOL 23 // Ruwido, e.g. T-Home Mediareceiver
+#define IRMP_IR60_PROTOCOL 24 // IR60 (SDA2008)
+#define IRMP_KATHREIN_PROTOCOL 25 // Kathrein
+#define IRMP_NETBOX_PROTOCOL 26 // Netbox keyboard (bitserial)
+#define IRMP_NEC16_PROTOCOL 27 // NEC with 16 bits (incl. sync)
+#define IRMP_NEC42_PROTOCOL 28 // NEC with 42 bits
+#define IRMP_LEGO_PROTOCOL 29 // LEGO Power Functions RC
+#define IRMP_THOMSON_PROTOCOL 30 // Thomson
+#define IRMP_BOSE_PROTOCOL 31 // BOSE
+#define IRMP_A1TVBOX_PROTOCOL 32 // A1 TV Box
+#define IRMP_ORTEK_PROTOCOL 33 // ORTEK - Hama
+#define IRMP_TELEFUNKEN_PROTOCOL 34 // Telefunken (1560)
+#define IRMP_ROOMBA_PROTOCOL 35 // iRobot Roomba vacuum cleaner
+#define IRMP_RCMM32_PROTOCOL 36 // Fujitsu-Siemens (Activy remote control)
+#define IRMP_RCMM24_PROTOCOL 37 // Fujitsu-Siemens (Activy keyboard)
+#define IRMP_RCMM12_PROTOCOL 38 // Fujitsu-Siemens (Activy keyboard)
+#define IRMP_SPEAKER_PROTOCOL 39 // Another loudspeaker protocol, similar to Nubert
+#define IRMP_LGAIR_PROTOCOL 40 // LG air conditioner
+#define IRMP_SAMSUNG48_PROTOCOL 41 // air conditioner with SAMSUNG protocol (48 bits)
+#define IRMP_MERLIN_PROTOCOL 42 // Merlin (Pollin 620 185)
+#define IRMP_PENTAX_PROTOCOL 43 // Pentax camera
+#define IRMP_FAN_PROTOCOL 44 // FAN (ventilator), very similar to NUBERT, but last bit is data bit instead of stop bit
+#define IRMP_S100_PROTOCOL 45 // very similar to RC5, but 14 instead of 13 data bits
+#define IRMP_ACP24_PROTOCOL 46 // Stiebel Eltron ACP24 air conditioner
+#define IRMP_TECHNICS_PROTOCOL 47 // Technics, similar to Matsushita, but 22 instead of 24 bits
+#define IRMP_PANASONIC_PROTOCOL 48 // Panasonic (Beamer), start bits similar to KASEIKYO
+#define IRMP_MITSU_HEAVY_PROTOCOL 49 // Mitsubishi-Heavy Aircondition, similar timing as Panasonic beamer
+#define IRMP_VINCENT_PROTOCOL 50 // Vincent
+#define IRMP_SAMSUNGAH_PROTOCOL 51 // SAMSUNG AH
+#define IRMP_IRMP16_PROTOCOL 52 // IRMP specific protocol for data transfer, e.g. between two microcontrollers via IR
+#define IRMP_GREE_PROTOCOL 53 // Gree climate
+#define IRMP_RCII_PROTOCOL 54 // RC II Infra Red Remote Control Protocol for FM8
+#define IRMP_METZ_PROTOCOL 55 // METZ
+#define IRMP_ONKYO_PROTOCOL 56
+
+#define IRMP_RADIO1_PROTOCOL 57 // Radio protocol (experimental status), do not use it yet!
+
+#define IRMP_N_PROTOCOLS 57 // number of supported protocols
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * timing constants:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+// fm 22.09.2011: may not be more than 16000L, otherwise some JVC codes will not be accepted
+#define IRMP_TIMEOUT_TIME 15500.0e-6 // timeout after 15.5 ms darkness
+#define IRMP_TIMEOUT_TIME_MS 15500L // timeout after 15.5 ms darkness
+
+#if IRMP_SUPPORT_NIKON_PROTOCOL == 1
+# define IRMP_TIMEOUT_NIKON_TIME 29500.0e-6 // 2nd timeout after 29.5 ms darkness (only for NIKON!)
+# define IRMP_TIMEOUT_NIKON_TIME_MS 29500L // 2nd timeout after 29.5 ms darkness
+typedef uint16_t PAUSE_LEN;
+# define IRMP_TIMEOUT_NIKON_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_NIKON_TIME + 0.5)
+#else
+# if (F_INTERRUPTS * IRMP_TIMEOUT_TIME_MS) / 1000000 >= 254
+typedef uint16_t PAUSE_LEN;
+# else
+typedef uint8_t PAUSE_LEN;
+# endif
+#endif
+
+#define IRMP_TIMEOUT_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_TIME + 0.5)
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * flags of struct IRMP_PARAMETER:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01
+#define IRMP_PARAM_FLAG_1ST_PULSE_IS_1 0x02
+#define IRMP_PARAM_FLAG_IS_SERIAL 0x04
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * SIRCS:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse
+#define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause
+#define SIRCS_1_PULSE_TIME 1200.0e-6 // 1200 usec pulse
+#define SIRCS_0_PULSE_TIME 600.0e-6 // 600 usec pulse
+#define SIRCS_PAUSE_TIME 600.0e-6 // 600 usec pause
+#define SIRCS_FRAMES 3 // SIRCS sends each frame 3 times
+#define SIRCS_AUTO_REPETITION_PAUSE_TIME 25.0e-3 // auto repetition after 25ms
+#define SIRCS_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
+#define SIRCS_ADDRESS_OFFSET 15 // skip 15 bits
+#define SIRCS_ADDRESS_LEN 5 // read up to 5 address bits
+#define SIRCS_COMMAND_OFFSET 0 // skip 0 bits
+#define SIRCS_COMMAND_LEN 15 // read 12-15 command bits
+#define SIRCS_MINIMUM_DATA_LEN 12 // minimum data length
+#define SIRCS_COMPLETE_DATA_LEN 20 // complete length - may be up to 20
+#define SIRCS_STOP_BIT 0 // has no stop bit
+#define SIRCS_LSB 1 // LSB...MSB
+#define SIRCS_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * NEC & NEC42 & NEC16 & LGAIR:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse
+#define NEC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
+#define NEC_REPEAT_START_BIT_PAUSE_TIME 2250.0e-6 // 2250 usec pause
+#define NEC_PULSE_TIME 560.0e-6 // 560 usec pulse
+#define NEC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause
+#define NEC_0_PAUSE_TIME 560.0e-6 // 560 usec pause
+#define NEC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
+#define NEC_ADDRESS_OFFSET 0 // skip 0 bits
+#define NEC_ADDRESS_LEN 16 // read 16 address bits
+#define NEC_COMMAND_OFFSET 16 // skip 16 bits (8 address + 8 /address)
+#define NEC_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command)
+#define NEC_COMPLETE_DATA_LEN 32 // complete length
+#define NEC_STOP_BIT 1 // has stop bit
+#define NEC_LSB 1 // LSB...MSB
+#define NEC_FLAGS 0 // flags
+
+#define NEC42_ADDRESS_OFFSET 0 // skip 0 bits
+#define NEC42_ADDRESS_LEN 13 // read 13 address bits
+#define NEC42_COMMAND_OFFSET 26 // skip 26 bits (2 x 13 address bits)
+#define NEC42_COMMAND_LEN 8 // read 8 command bits
+#define NEC42_COMPLETE_DATA_LEN 42 // complete length (2 x 13 + 2 x 8)
+
+#define LGAIR_ADDRESS_OFFSET 0 // skip 0 bits
+#define LGAIR_ADDRESS_LEN 8 // read 8 address bits
+#define LGAIR_COMMAND_OFFSET 8 // skip 8 bits (8 address)
+#define LGAIR_COMMAND_LEN 16 // read 16 bits (16 command)
+#define LGAIR_COMPLETE_DATA_LEN 28 // complete length (8 address + 16 command + 4 checksum)
+
+#define NEC16_ADDRESS_OFFSET 0 // skip 0 bits
+#define NEC16_ADDRESS_LEN 8 // read 8 address bits
+#define NEC16_COMMAND_OFFSET 8 // skip 8 bits (8 address)
+#define NEC16_COMMAND_LEN 8 // read 8 bits (8 command)
+#define NEC16_COMPLETE_DATA_LEN 16 // complete length
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * SAMSUNG & SAMSUNG32 & SAMSUNG48:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse
+#define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
+#define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse
+#define SAMSUNG_1_PAUSE_TIME 1500.0e-6 // 1550 usec pause
+#define SAMSUNG_0_PAUSE_TIME 500.0e-6 // 500 usec pause
+
+#define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
+#define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits
+#define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits
+#define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit
+#define SAMSUNG_ID_LEN 4 // read 4 id bits
+#define SAMSUNG_COMMAND_OFFSET 21 // skip 16 + 1 sync + 4 data bits
+#define SAMSUNG_COMMAND_LEN 16 // read 16 command bits
+#define SAMSUNG_COMPLETE_DATA_LEN 37 // complete length
+#define SAMSUNG_STOP_BIT 1 // has stop bit
+#define SAMSUNG_LSB 1 // LSB...MSB?
+#define SAMSUNG_FLAGS 0 // flags
+
+#define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits
+#define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits
+#define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length
+#define SAMSUNG32_FRAMES 1 // SAMSUNG32 sends one frame
+#define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms
+#define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 47ms
+
+#define SAMSUNG48_COMMAND_OFFSET 16 // skip 16 bits
+#define SAMSUNG48_COMMAND_LEN 32 // read 32 command bits
+#define SAMSUNG48_COMPLETE_DATA_LEN 48 // complete length
+#define SAMSUNG48_FRAMES 2 // SAMSUNG48 sends each frame 2 times
+#define SAMSUNG48_AUTO_REPETITION_PAUSE_TIME 5.0e-3 // repetition after 5 ms
+#define SAMSUNG48_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 47ms
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * SAMSUNGAH:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define SAMSUNGAH_START_BIT_PULSE_TIME 2500.0e-6 // 2500 usec pulse
+#define SAMSUNGAH_START_BIT_PAUSE_TIME 1900.0e-6 // 1900 usec pause
+#define SAMSUNGAH_PULSE_TIME 450.0e-6 // 450 usec pulse
+#define SAMSUNGAH_1_PAUSE_TIME 1100.0e-6 // 1100 usec pause
+#define SAMSUNGAH_0_PAUSE_TIME 450.0e-6 // 450 usec pause
+#define SAMSUNGAH_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
+#define SAMSUNGAH_ADDRESS_OFFSET 0 // skip 0 bits
+#define SAMSUNGAH_ADDRESS_LEN 16 // read 16 address bits, ignore 17..31
+#define SAMSUNGAH_COMMAND_OFFSET 32 // skip 32 bits
+#define SAMSUNGAH_COMMAND_LEN 16 // read 32 bits
+#define SAMSUNGAH_COMPLETE_DATA_LEN 48 // complete length
+#define SAMSUNGAH_STOP_BIT 1 // has stop bit
+#define SAMSUNGAH_LSB 1 // LSB...MSB?
+#define SAMSUNGAH_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * MATSUSHITA:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse
+#define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause
+#define MATSUSHITA_PULSE_TIME 872.0e-6 // 872 usec pulse
+#define MATSUSHITA_1_PAUSE_TIME 2616.0e-6 // 2616 usec pause
+#define MATSUSHITA_0_PAUSE_TIME 872.0e-6 // 872 usec pause
+#define MATSUSHITA_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
+#define MATSUSHITA_ADDRESS_OFFSET 12 // skip 12 bits
+#define MATSUSHITA_ADDRESS_LEN 12 // read 12 address bits
+#define MATSUSHITA_COMMAND_OFFSET 0 // skip 0 bits
+#define MATSUSHITA_COMMAND_LEN 12 // read 12 bits (6 custom + 6 command)
+#define MATSUSHITA_COMPLETE_DATA_LEN 24 // complete length
+#define MATSUSHITA_STOP_BIT 1 // has stop bit
+#define MATSUSHITA_LSB 1 // LSB...MSB?
+#define MATSUSHITA_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * TECHNICS: same timings as MATSUSHITA
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define TECHNICS_ADDRESS_LEN 0 // read 0 address bits
+#define TECHNICS_COMMAND_LEN 11 // read 11 bits
+#define TECHNICS_COMPLETE_DATA_LEN 22 // complete length
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * KASEIKYO:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define KASEIKYO_START_BIT_PULSE_TIME 3380.0e-6 // 3380 usec pulse
+#define KASEIKYO_START_BIT_PAUSE_TIME 1690.0e-6 // 1690 usec pause
+#define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse
+#define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause
+#define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause
+#define KASEIKYO_AUTO_REPETITION_PAUSE_TIME 74.0e-3 // repetition after 74 ms
+#define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 74.0e-3 // frame repeat after 74 ms
+#define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits
+#define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits
+#define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre)
+#define KASEIKYO_COMMAND_LEN 12 // read 12 command bits (10 real command & 2 id)
+#define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length
+#define KASEIKYO_STOP_BIT 1 // has stop bit
+#define KASEIKYO_LSB 1 // LSB...MSB?
+#define KASEIKYO_FRAMES 1 // KASEIKYO sends 1 frame
+#define KASEIKYO_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * PANASONIC (Beamer), start bit timings similar to KASEIKYO
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define PANASONIC_START_BIT_PULSE_TIME 3600.0e-6 // 3600 usec pulse
+#define PANASONIC_START_BIT_PAUSE_TIME 1600.0e-6 // 1690 usec pause
+#define PANASONIC_PULSE_TIME 565.0e-6 // 565 usec pulse
+#define PANASONIC_1_PAUSE_TIME 1140.0e-6 // 1140 usec pause
+#define PANASONIC_0_PAUSE_TIME 316.0e-6 // 316 usec pause
+#define PANASONIC_AUTO_REPETITION_PAUSE_TIME 40.0e-3 // repetition after 40 ms?
+#define PANASONIC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40 ms
+#define PANASONIC_ADDRESS_OFFSET 24 // skip 24 bits: 010000000000010000000001
+#define PANASONIC_ADDRESS_LEN 16 // read 16 address bits
+#define PANASONIC_COMMAND_OFFSET 40 // skip 40 bits
+#define PANASONIC_COMMAND_LEN 16 // read 16 command bits
+#define PANASONIC_COMPLETE_DATA_LEN 56 // complete length
+#define PANASONIC_STOP_BIT 1 // has stop bit
+#define PANASONIC_LSB 1 // LSB...MSB?
+#define PANASONIC_FRAMES 1 // PANASONIC sends 1 frame
+#define PANASONIC_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * MITSUBISHI-Heavy Aircondition, timings similar to PANASONIC beamer
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define MITSU_HEAVY_START_BIT_PULSE_TIME 3200.0e-6 // 3600 usec pulse
+#define MITSU_HEAVY_START_BIT_PAUSE_TIME 1560.0e-6 // 1690 usec pause
+#define MITSU_HEAVY_PULSE_TIME 400.0e-6 // 565 usec pulse
+#define MITSU_HEAVY_1_PAUSE_TIME 1200.0e-6 // 1140 usec pause
+#define MITSU_HEAVY_0_PAUSE_TIME 430.0e-6 // 316 usec pause
+#define MITSU_HEAVY_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40 ms
+#define MITSU_HEAVY_ADDRESS_OFFSET 40 // skip 24 bits: 010000000000010000000001
+#define MITSU_HEAVY_ADDRESS_LEN 16 // read 16 address bits
+#define MITSU_HEAVY_COMMAND_OFFSET 56 // skip 40 bits
+#define MITSU_HEAVY_COMMAND_LEN 16 // read 16 command bits
+#define MITSU_HEAVY_COMPLETE_DATA_LEN 88 // complete length
+#define MITSU_HEAVY_STOP_BIT 1 // has stop bit
+#define MITSU_HEAVY_LSB 0 // LSB...MSB?
+#define MITSU_HEAVY_FRAMES 1 // PANASONIC sends 1 frame
+#define MITSU_HEAVY_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * VINCENT
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define VINCENT_START_BIT_PULSE_TIME 2500.0e-6 // 2500 usec pulse
+#define VINCENT_START_BIT_PAUSE_TIME 4600.0e-6 // 4600 usec pause
+#define VINCENT_PULSE_TIME 550.0e-6 // 550 usec pulse
+#define VINCENT_1_PAUSE_TIME 1540.0e-6 // 1540 usec pause
+#define VINCENT_0_PAUSE_TIME 550.0e-6 // 550 usec pause
+#define VINCENT_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40 ms ?
+#define VINCENT_ADDRESS_OFFSET 0 // skip 0 bits
+#define VINCENT_ADDRESS_LEN 16 // read 16 address bits
+#define VINCENT_COMMAND_OFFSET 16 // skip 16 bits
+#define VINCENT_COMMAND_LEN 16 // read 16 command bits
+#define VINCENT_COMPLETE_DATA_LEN 32 // complete length
+#define VINCENT_STOP_BIT 1 // has stop bit
+#define VINCENT_LSB 0 // LSB...MSB?
+#define VINCENT_FRAMES 1 // VINCENT sends 1 frame
+#define VINCENT_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * RECS80:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse
+#define RECS80_START_BIT_PAUSE_TIME 7432.0e-6 // 7432 usec pause
+#define RECS80_PULSE_TIME 158.0e-6 // 158 usec pulse
+#define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause
+#define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause
+#define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
+#define RECS80_ADDRESS_OFFSET 1 // skip 1 bit (toggle bit)
+#define RECS80_ADDRESS_LEN 3 // read 3 address bits
+#define RECS80_COMMAND_OFFSET 4 // skip 4 bits (1 toggle + 3 address)
+#define RECS80_COMMAND_LEN 6 // read 6 command bits
+#define RECS80_COMPLETE_DATA_LEN 10 // complete length
+#define RECS80_STOP_BIT 1 // has stop bit
+#define RECS80_LSB 0 // MSB...LSB
+#define RECS80_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * RC5:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause
+#define RC5_FRAME_REPEAT_PAUSE_TIME 88.9e-3 // frame repeat after 88.9ms
+
+#define RC5_ADDRESS_OFFSET 1 // skip 1 bit (2nd start)
+#define RC5_ADDRESS_LEN 6 // read 1 toggle bit (for key repetition detection) + 5 address bits
+#define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)
+#define RC5_COMMAND_LEN 6 // read 6 command bits
+#define RC5_COMPLETE_DATA_LEN 13 // complete length
+#define RC5_STOP_BIT 0 // has no stop bit
+#define RC5_LSB 0 // MSB...LSB
+#define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * RCII:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define RCII_START_BIT_PULSE_TIME 512.0e-6 // 512 usec pulse
+#define RCII_START_BIT_PAUSE_TIME 2560.0e-6 // 2560 usec pause
+#define RCII_START_BIT2_PULSE_TIME 1024.0e-6 // 1024 usec pulse
+
+#define RCII_BIT_TIME 512.0e-6 // 512 usec pulse/pause
+#define RCII_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // frame repeat after 117.76ms
+
+#define RCII_ADDRESS_OFFSET 0 // skip 1 bit (2nd start)
+#define RCII_ADDRESS_LEN 0 // no address
+#define RCII_COMMAND_OFFSET 0 // command offset is 0
+#define RCII_COMMAND_LEN 10 // read 1 + 9 command bits
+#define RCII_COMPLETE_DATA_LEN 10 // complete length
+#define RCII_STOP_BIT 0 // has no stop bit
+#define RCII_LSB 0 // MSB...LSB
+#define RCII_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * S100: very similar to RC5, but 14 insted of 13 bits
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define S100_BIT_TIME 889.0e-6 // 889 usec pulse/pause
+#define S100_FRAME_REPEAT_PAUSE_TIME 88.9e-3 // frame repeat after 88.9ms
+
+#define S100_ADDRESS_OFFSET 1 // skip 1 bit (2nd start)
+#define S100_ADDRESS_LEN 6 // read 1 toggle bit (for key repetition detection) + 5 address bits
+#define S100_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)
+#define S100_COMMAND_LEN 7 // read 7 command bits
+#define S100_COMPLETE_DATA_LEN 14 // complete length
+#define S100_STOP_BIT 0 // has no stop bit
+#define S100_LSB 0 // MSB...LSB
+#define S100_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * DENON:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define DENON_PULSE_TIME 310.0e-6 // 310 usec pulse in practice, 275 in theory
+#define DENON_1_PAUSE_TIME 1780.0e-6 // 1780 usec pause in practice, 1900 in theory
+#define DENON_0_PAUSE_TIME 745.0e-6 // 745 usec pause in practice, 775 in theory
+#define DENON_FRAMES 2 // DENON sends each frame 2 times
+#define DENON_AUTO_REPETITION_PAUSE_TIME 45.0e-3 // inverted repetition after 45ms
+#define DENON_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
+#define DENON_ADDRESS_OFFSET 0 // skip 0 bits
+#define DENON_ADDRESS_LEN 5 // read 5 address bits
+#define DENON_COMMAND_OFFSET 5 // skip 5
+#define DENON_COMMAND_LEN 10 // read 10 command bits
+#define DENON_COMPLETE_DATA_LEN 15 // complete length
+#define DENON_STOP_BIT 1 // has stop bit
+#define DENON_LSB 0 // MSB...LSB
+#define DENON_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * RC6:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define RC6_START_BIT_PULSE_TIME 2666.0e-6 // 2.666 msec pulse
+#define RC6_START_BIT_PAUSE_TIME 889.0e-6 // 889 usec pause
+#define RC6_TOGGLE_BIT_TIME 889.0e-6 // 889 msec pulse/pause
+#define RC6_BIT_TIME 444.0e-6 // 444 usec pulse/pause
+#define RC6_BIT_2_TIME 889.0e-6 // 889 usec pulse/pause
+#define RC6_BIT_3_TIME 1333.0e-6 // 1333 usec pulse/pause
+#define RC6_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
+#define RC6_ADDRESS_OFFSET 5 // skip "1" + 3 mode bits + 1 toggle bit
+#define RC6_ADDRESS_LEN 8 // read 8 address bits
+#define RC6_COMMAND_OFFSET 13 // skip 12 bits ("1" + 3 mode + 1 toggle + 8 address)
+#define RC6_COMMAND_LEN 8 // read 8 command bits
+#define RC6_COMPLETE_DATA_LEN_SHORT 21 // complete length
+#define RC6_COMPLETE_DATA_LEN_LONG 36 // complete length
+#define RC6_STOP_BIT 0 // has no stop bit
+#define RC6_LSB 0 // MSB...LSB
+#define RC6_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * RECS80EXT:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define RECS80EXT_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse
+#define RECS80EXT_START_BIT_PAUSE_TIME 3637.0e-6 // 3637 usec pause
+#define RECS80EXT_PULSE_TIME 158.0e-6 // 158 usec pulse
+#define RECS80EXT_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause
+#define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause
+#define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
+#define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)
+#define RECS80EXT_ADDRESS_LEN 4 // read 4 address bits
+#define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address)
+#define RECS80EXT_COMMAND_LEN 6 // read 6 command bits
+#define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length
+#define RECS80EXT_STOP_BIT 1 // has stop bit
+#define RECS80EXT_LSB 0 // MSB...LSB
+#define RECS80EXT_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * NUBERT:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define NUBERT_START_BIT_PULSE_TIME 1340.0e-6 // 1340 usec pulse
+#define NUBERT_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause
+#define NUBERT_1_PULSE_TIME 1340.0e-6 // 1340 usec pulse
+#define NUBERT_1_PAUSE_TIME 340.0e-6 // 340 usec pause
+#define NUBERT_0_PULSE_TIME 500.0e-6 // 500 usec pulse
+#define NUBERT_0_PAUSE_TIME 1300.0e-6 // 1300 usec pause
+#define NUBERT_FRAMES 2 // Nubert sends 2 frames
+#define NUBERT_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
+#define NUBERT_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms
+#define NUBERT_ADDRESS_OFFSET 0 // skip 0 bits
+#define NUBERT_ADDRESS_LEN 0 // read 0 address bits
+#define NUBERT_COMMAND_OFFSET 0 // skip 0 bits
+#define NUBERT_COMMAND_LEN 10 // read 10 bits
+#define NUBERT_COMPLETE_DATA_LEN 10 // complete length
+#define NUBERT_STOP_BIT 1 // has stop bit
+#define NUBERT_LSB 0 // MSB?
+#define NUBERT_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * FAN: (ventilator)
+ *
+ * Similar to NUBERT, but
+ * - has data bit instead of stop bit
+ * - has NO frame repetition
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define FAN_START_BIT_PULSE_TIME 1280.0e-6 // 1280 usec pulse
+#define FAN_START_BIT_PAUSE_TIME 380.0e-6 // 380 usec pause
+#define FAN_1_PULSE_TIME 1280.0e-6 // 1280 usec pulse
+#define FAN_1_PAUSE_TIME 380.0e-6 // 380 usec pause
+#define FAN_0_PULSE_TIME 380.0e-6 // 380 usec pulse
+#define FAN_0_PAUSE_TIME 1280.0e-6 // 1280 usec pause
+#define FAN_FRAMES 1 // FAN sends only 1 frame (NUBERT sends 2)
+#define FAN_AUTO_REPETITION_PAUSE_TIME 6.6e-3 // auto repetition after 6.6ms
+#define FAN_FRAME_REPEAT_PAUSE_TIME 6.6e-3 // frame repeat after 6.6ms
+#define FAN_ADDRESS_OFFSET 0 // skip 0 bits
+#define FAN_ADDRESS_LEN 0 // read 0 address bits
+#define FAN_COMMAND_OFFSET 0 // skip 0 bits
+#define FAN_COMMAND_LEN 11 // read 10 bits
+#define FAN_COMPLETE_DATA_LEN 11 // complete length
+#define FAN_STOP_BIT 0 // has NO stop bit (fm: this seems to be wrong)
+#define FAN_LSB 0 // MSB
+#define FAN_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * SPEAKER:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define SPEAKER_START_BIT_PULSE_TIME 440.0e-6 // 440 usec pulse
+#define SPEAKER_START_BIT_PAUSE_TIME 1250.0e-6 // 1250 usec pause
+#define SPEAKER_1_PULSE_TIME 1250.0e-6 // 1250 usec pulse
+#define SPEAKER_1_PAUSE_TIME 440.0e-6 // 440 usec pause
+#define SPEAKER_0_PULSE_TIME 440.0e-6 // 440 usec pulse
+#define SPEAKER_0_PAUSE_TIME 1250.0e-6 // 1250 usec pause
+#define SPEAKER_FRAMES 2 // SPEAKER sends 2 frames
+#define SPEAKER_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
+#define SPEAKER_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms
+#define SPEAKER_ADDRESS_OFFSET 0 // skip 0 bits
+#define SPEAKER_ADDRESS_LEN 0 // read 0 address bits
+#define SPEAKER_COMMAND_OFFSET 0 // skip 0 bits
+#define SPEAKER_COMMAND_LEN 10 // read 10 bits
+#define SPEAKER_COMPLETE_DATA_LEN 10 // complete length
+#define SPEAKER_STOP_BIT 1 // has stop bit
+#define SPEAKER_LSB 0 // MSB?
+#define SPEAKER_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * BANG_OLUFSEN:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define BANG_OLUFSEN_START_BIT1_PULSE_TIME 200.0e-6 // 200 usec pulse
+#define BANG_OLUFSEN_START_BIT1_PAUSE_TIME 3125.0e-6 // 3125 usec pause
+#define BANG_OLUFSEN_START_BIT2_PULSE_TIME 200.0e-6 // 200 usec pulse
+#define BANG_OLUFSEN_START_BIT2_PAUSE_TIME 3125.0e-6 // 3125 usec pause
+#define BANG_OLUFSEN_START_BIT3_PULSE_TIME 200.0e-6 // 200 usec pulse
+#define BANG_OLUFSEN_START_BIT3_PAUSE_TIME 15625.0e-6 // 15625 usec pause
+#define BANG_OLUFSEN_START_BIT4_PULSE_TIME 200.0e-6 // 200 usec pulse
+#define BANG_OLUFSEN_START_BIT4_PAUSE_TIME 3125.0e-6 // 3125 usec pause
+#define BANG_OLUFSEN_PULSE_TIME 200.0e-6 // 200 usec pulse
+#define BANG_OLUFSEN_1_PAUSE_TIME 9375.0e-6 // 9375 usec pause
+#define BANG_OLUFSEN_0_PAUSE_TIME 3125.0e-6 // 3125 usec pause
+#define BANG_OLUFSEN_R_PAUSE_TIME 6250.0e-6 // 6250 usec pause (repeat last bit)
+#define BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME 12500.0e-6 // 12500 usec pause (trailer bit)
+#define BANG_OLUFSEN_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
+#define BANG_OLUFSEN_ADDRESS_OFFSET 0 // no address bits
+#define BANG_OLUFSEN_ADDRESS_LEN 0 // no address bits
+#define BANG_OLUFSEN_COMMAND_OFFSET 3 // skip startbits 2, 3, 4
+#define BANG_OLUFSEN_COMMAND_LEN 16 // read 16 command bits
+#define BANG_OLUFSEN_COMPLETE_DATA_LEN 20 // complete length: startbits 2, 3, 4 + 16 data bits + trailer bit
+#define BANG_OLUFSEN_STOP_BIT 1 // has stop bit
+#define BANG_OLUFSEN_LSB 0 // MSB...LSB
+#define BANG_OLUFSEN_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * GRUNDIG & NOKIA
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define GRUNDIG_NOKIA_IR60_BIT_TIME 528.0e-6 // 528 usec pulse/pause
+#define GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit
+#define GRUNDIG_NOKIA_IR60_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms
+#define GRUNDIG_NOKIA_IR60_STOP_BIT 0 // has no stop bit
+#define GRUNDIG_NOKIA_IR60_LSB 1 // MSB...LSB
+#define GRUNDIG_NOKIA_IR60_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
+
+#define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times
+#define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms
+#define GRUNDIG_ADDRESS_OFFSET 0 // no address
+#define GRUNDIG_ADDRESS_LEN 0 // no address
+#define GRUNDIG_COMMAND_OFFSET 1 // skip 1 start bit
+#define GRUNDIG_COMMAND_LEN 9 // read 9 command bits
+#define GRUNDIG_COMPLETE_DATA_LEN 10 // complete length: 1 start bit + 9 data bits
+
+#define NOKIA_FRAMES 3 // NOKIA sends each frame 1 + 1 + 1 times
+#define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms
+#define NOKIA_ADDRESS_OFFSET 9 // skip 9 bits (1 start bit + 8 data bits)
+#define NOKIA_ADDRESS_LEN 8 // 7 address bits
+#define NOKIA_COMMAND_OFFSET 1 // skip 1 bit (1 start bit)
+#define NOKIA_COMMAND_LEN 8 // read 8 command bits
+#define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * IR60:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define IR60_FRAMES 2 // IR60 sends each frame 1+1 times
+#define IR60_AUTO_REPETITION_PAUSE_TIME 22.2e-3 // repetition after 22.2ms
+#define IR60_TIMEOUT_TIME 5000.0e-6 // timeout grundig frame, switch to IR60
+#define IR60_ADDRESS_OFFSET 0 // skip 1 bits
+#define IR60_ADDRESS_LEN 0 // read 0 address bits
+#define IR60_COMMAND_OFFSET 0 // skip 1 bit (start bit after pre bit, always 1)
+#define IR60_COMMAND_LEN 7 // read 6 command bits
+#define IR60_COMPLETE_DATA_LEN 7 // complete length
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * SIEMENS & RUWIDO:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+
+#if 0
+#define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 275.0e-6 // 275 usec pulse
+#define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause
+#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 275.0e-6 // 275 usec short pulse
+#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 550.0e-6 // 550 usec long pulse
+#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause
+#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause
+#else
+#define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 370.0e-6 // 370 usec pulse
+#define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause
+#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 370.0e-6 // 370 usec short pulse
+#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 680.0e-6 // 680 usec long pulse
+#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause
+#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause
+#endif
+
+#define SIEMENS_OR_RUWIDO_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
+#define SIEMENS_OR_RUWIDO_STOP_BIT 0 // has no stop bit
+#define SIEMENS_OR_RUWIDO_LSB 0 // MSB...LSB
+#define SIEMENS_OR_RUWIDO_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
+
+#define RUWIDO_ADDRESS_OFFSET 0 // skip 0 bits
+#define RUWIDO_ADDRESS_LEN 9 // read 9 address bits
+#define RUWIDO_COMMAND_OFFSET 9 // skip 9 bits
+#define RUWIDO_COMMAND_LEN 8 // read 7 + 1 command bits, last bit is only check bit
+#define RUWIDO_COMPLETE_DATA_LEN 17 // complete length
+
+#define SIEMENS_ADDRESS_OFFSET 0 // skip 0 bits
+#define SIEMENS_ADDRESS_LEN 11 // read 11 bits
+#define SIEMENS_COMMAND_OFFSET 11 // skip 11 bits
+#define SIEMENS_COMMAND_LEN 11 // read 10 + 1 command bits, last bit is only check bit
+#define SIEMENS_COMPLETE_DATA_LEN 22 // complete length
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * FDC:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define FDC_START_BIT_PULSE_TIME 2085.0e-6 // 2085 usec pulse
+#define FDC_START_BIT_PAUSE_TIME 966.0e-6 // 966 usec pause
+#define FDC_PULSE_TIME 300.0e-6 // 300 usec pulse
+#define FDC_1_PAUSE_TIME 715.0e-6 // 715 usec pause
+#define FDC_0_PAUSE_TIME 220.0e-6 // 220 usec pause
+#define FDC_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
+#define FDC_ADDRESS_OFFSET 0 // skip 0 bits
+#define FDC_ADDRESS_LEN 14 // read 14 address bits, but use only 6, shift 8 into command
+#define FDC_COMMAND_OFFSET 20 // skip 20 bits
+#define FDC_COMMAND_LEN 12 // read 12 bits
+#define FDC_COMPLETE_DATA_LEN 40 // complete length
+#define FDC_STOP_BIT 1 // has stop bit
+#define FDC_LSB 1 // LSB...MSB
+#define FDC_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * RCCAR:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define RCCAR_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse
+#define RCCAR_START_BIT_PAUSE_TIME 2000.0e-6 // 2000 usec pause
+#define RCCAR_PULSE_TIME 600.0e-6 // 360 usec pulse
+#define RCCAR_1_PAUSE_TIME 450.0e-6 // 650 usec pause
+#define RCCAR_0_PAUSE_TIME 900.0e-6 // 180 usec pause
+#define RCCAR_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
+#define RCCAR_ADDRESS_OFFSET 0 // skip 0 bits
+#define RCCAR_ADDRESS_LEN 0 // read 0 address bits
+#define RCCAR_COMMAND_OFFSET 0 // skip 0 bits
+#define RCCAR_COMMAND_LEN 13 // read 13 bits
+#define RCCAR_COMPLETE_DATA_LEN 13 // complete length
+#define RCCAR_STOP_BIT 1 // has stop bit
+#define RCCAR_LSB 1 // LSB...MSB
+#define RCCAR_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * JVC:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define JVC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse
+#define JVC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
+#define JVC_PULSE_TIME 560.0e-6 // 560 usec pulse
+#define JVC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause
+#define JVC_0_PAUSE_TIME 560.0e-6 // 560 usec pause
+#define JVC_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms
+#define JVC_ADDRESS_OFFSET 0 // skip 0 bits
+#define JVC_ADDRESS_LEN 4 // read 4 address bits
+#define JVC_COMMAND_OFFSET 4 // skip 4 bits
+#define JVC_COMMAND_LEN 12 // read 12 bits
+#define JVC_COMPLETE_DATA_LEN 16 // complete length
+#define JVC_STOP_BIT 1 // has stop bit
+#define JVC_LSB 1 // LSB...MSB
+#define JVC_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * NIKON:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define NIKON_START_BIT_PULSE_TIME 2200.0e-6 // 2200 usec pulse
+#define NIKON_START_BIT_PAUSE_TIME 27100.0e-6 // 27100 usec pause
+#define NIKON_PULSE_TIME 500.0e-6 // 500 usec pulse
+#define NIKON_1_PAUSE_TIME 3500.0e-6 // 3500 usec pause
+#define NIKON_0_PAUSE_TIME 1500.0e-6 // 1500 usec pause
+#define NIKON_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
+#define NIKON_ADDRESS_OFFSET 0 // skip 0 bits
+#define NIKON_ADDRESS_LEN 0 // read 0 address bits
+#define NIKON_COMMAND_OFFSET 0 // skip 0 bits
+#define NIKON_COMMAND_LEN 2 // read 2 bits
+#define NIKON_COMPLETE_DATA_LEN 2 // complete length
+#define NIKON_STOP_BIT 1 // has stop bit
+#define NIKON_LSB 0 // LSB...MSB
+#define NIKON_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * KATHREIN:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define KATHREIN_START_BIT_PULSE_TIME 210.0e-6 // 1340 usec pulse
+#define KATHREIN_START_BIT_PAUSE_TIME 6218.0e-6 // 340 usec pause
+#define KATHREIN_1_PULSE_TIME 210.0e-6 // 1340 usec pulse
+#define KATHREIN_1_PAUSE_TIME 3000.0e-6 // 340 usec pause
+#define KATHREIN_0_PULSE_TIME 210.0e-6 // 500 usec pulse
+#define KATHREIN_0_PAUSE_TIME 1400.0e-6 // 1300 usec pause
+#define KATHREIN_SYNC_BIT_PAUSE_LEN_TIME 4600.0e-6 // 4600 usec sync (on 6th and/or 8th bit)
+#define KATHREIN_FRAMES 1 // Kathrein sends 1 frame
+#define KATHREIN_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
+#define KATHREIN_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms
+#define KATHREIN_ADDRESS_OFFSET 1 // skip 1 bits
+#define KATHREIN_ADDRESS_LEN 4 // read 4 address bits
+#define KATHREIN_COMMAND_OFFSET 5 // skip 5 bits
+#define KATHREIN_COMMAND_LEN 7 // read 7 bits
+#define KATHREIN_COMPLETE_DATA_LEN 13 // complete length
+#define KATHREIN_STOP_BIT 1 // has stop bit
+#define KATHREIN_LSB 0 // MSB
+#define KATHREIN_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * NETBOX:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define NETBOX_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse
+#define NETBOX_START_BIT_PAUSE_TIME 800.0e-6 // 800 usec pause
+#define NETBOX_PULSE_TIME 800.0e-6 // 800 usec pulse
+#define NETBOX_PAUSE_TIME 800.0e-6 // 800 usec pause
+#define NETBOX_FRAMES 1 // Netbox sends 1 frame
+#define NETBOX_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
+#define NETBOX_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms
+#define NETBOX_ADDRESS_OFFSET 0 // skip 0 bits
+#define NETBOX_ADDRESS_LEN 3 // read 3 address bits
+#define NETBOX_COMMAND_OFFSET 3 // skip 3 bits
+#define NETBOX_COMMAND_LEN 13 // read 13 bits
+#define NETBOX_COMPLETE_DATA_LEN 16 // complete length
+#define NETBOX_STOP_BIT 0 // has no stop bit
+#define NETBOX_LSB 1 // LSB
+#define NETBOX_FLAGS IRMP_PARAM_FLAG_IS_SERIAL // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * LEGO:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define LEGO_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse ( 6 x 1/38kHz)
+#define LEGO_START_BIT_PAUSE_TIME 1026.0e-6 // 1026 usec pause (39 x 1/38kHz)
+#define LEGO_PULSE_TIME 158.0e-6 // 158 usec pulse ( 6 x 1/38kHz)
+#define LEGO_1_PAUSE_TIME 553.0e-6 // 553 usec pause (21 x 1/38kHz)
+#define LEGO_0_PAUSE_TIME 263.0e-6 // 263 usec pause (10 x 1/38kHz)
+#define LEGO_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
+#define LEGO_ADDRESS_OFFSET 0 // skip 0 bits
+#define LEGO_ADDRESS_LEN 0 // read 0 address bits
+#define LEGO_COMMAND_OFFSET 0 // skip 0 bits
+#define LEGO_COMMAND_LEN 16 // read 16 bits (12 command + 4 CRC)
+#define LEGO_COMPLETE_DATA_LEN 16 // complete length
+#define LEGO_STOP_BIT 1 // has stop bit
+#define LEGO_LSB 0 // MSB...LSB
+#define LEGO_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * THOMSON:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define THOMSON_PULSE_TIME 550.0e-6 // 550 usec pulse
+#define THOMSON_1_PAUSE_TIME 4500.0e-6 // 4500 usec pause
+#define THOMSON_0_PAUSE_TIME 2000.0e-6 // 2000 usec pause
+#define THOMSON_FRAMES 1 // THOMSON sends 1 frame
+#define THOMSON_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // repetition after 35ms
+#define THOMSON_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms
+#define THOMSON_ADDRESS_OFFSET 0 // skip 0 bits
+#define THOMSON_ADDRESS_LEN 4 // read 4 address bits
+#define THOMSON_COMMAND_OFFSET 5 // skip 4 address bits + 1 toggle bit
+#define THOMSON_COMMAND_LEN 7 // read 7 command bits
+#define THOMSON_COMPLETE_DATA_LEN 12 // complete length
+#define THOMSON_STOP_BIT 1 // has stop bit
+#define THOMSON_LSB 0 // MSB...LSB
+#define THOMSON_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * BOSE:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define BOSE_START_BIT_PULSE_TIME 1060.0e-6 // 1060 usec pulse
+#define BOSE_START_BIT_PAUSE_TIME 1425.0e-6 // 1425 usec pause
+#define BOSE_PULSE_TIME 550.0e-6 // 550 usec pulse
+#define BOSE_1_PAUSE_TIME 1425.0e-6 // 1425 usec pause
+#define BOSE_0_PAUSE_TIME 437.0e-6 // 437 usec pause
+#define BOSE_FRAMES 1
+#define BOSE_AUTO_REPETITION_PAUSE_TIME 40.0e-3 // repetition after 40ms?
+#define BOSE_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms?
+#define BOSE_ADDRESS_OFFSET 0 // skip 0 bits
+#define BOSE_ADDRESS_LEN 0 // read 16 address bits
+#define BOSE_COMMAND_OFFSET 0 // skip 16 bits (8 address + 8 /address)
+#define BOSE_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command)
+#define BOSE_COMPLETE_DATA_LEN 16 // complete length
+#define BOSE_STOP_BIT 1 // has stop bit
+#define BOSE_LSB 1 // LSB...MSB
+#define BOSE_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * A1TVBOX:
+ * In reality A1 TV Box has no start bit with 300/340 usec. There are 2 start bits "10" with 250us pulse + 150us pause + 150us pause + 250us pulse
+ * This is not very easy to detect, because 1st and 2nd pause of both start bits are closely spaced.
+ * So IRMP looks for pseudo start bit with 300/340 usec and ignores the second half of the 2nd bit (250us pulse)
+ * This method only works because the first data bit (which is the 3rd bit) following is always "1":
+ * IRMP treats the first "long" pulse (250us of 2nd start bit + 250us of 1st data bit) of this "1" as a first _short_ pulse.
+ * This is a bug in IRMP's manchester decoder, but a good feature here ;-)
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define A1TVBOX_START_BIT_PULSE_TIME 300.0e-6 // 300 usec pulse
+#define A1TVBOX_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause
+#define A1TVBOX_BIT_PULSE_TIME 250.0e-6 // 250 usec pulse
+#define A1TVBOX_BIT_PAUSE_TIME 150.0e-6 // 150 usec pulse
+#define A1TVBOX_STOP_BIT 0 // has no stop bit
+#define A1TVBOX_LSB 0 // MSB...LSB
+#define A1TVBOX_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1 ) // flags
+#define A1TVBOX_FRAMES 1 // A1TVBOX sends each frame 1 times
+#define A1TVBOX_ADDRESS_OFFSET 1 // skip 1 bits
+#define A1TVBOX_ADDRESS_LEN 8 // read 8 address bits
+#define A1TVBOX_COMMAND_OFFSET 9 // skip 9 bits (start bit + address)
+#define A1TVBOX_COMMAND_LEN 8 // read 8 command bits
+#define A1TVBOX_COMPLETE_DATA_LEN 17 // complete length incl. start bit
+#define A1TVBOX_FRAME_REPEAT_PAUSE_TIME 50.0e-3 // 50 msec pause between frames, don't know if it is correct
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * MERLIN:
+ * See notes for A1TVBOX
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define MERLIN_START_BIT_PULSE_TIME 210.0e-6 // 210 usec pulse
+#define MERLIN_START_BIT_PAUSE_TIME 420.0e-6 // 429 usec pause
+#define MERLIN_BIT_PULSE_TIME 210.0e-6 // 210 usec pulse
+#define MERLIN_BIT_PAUSE_TIME 210.0e-6 // 210 usec pulse
+#define MERLIN_STOP_BIT 0 // has no stop bit
+#define MERLIN_LSB 0 // MSB...LSB
+#define MERLIN_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1 ) // flags
+#define MERLIN_FRAMES 1 // MERLIN sends each frame 1 times
+#define MERLIN_ADDRESS_OFFSET 2 // skip 1 bits
+#define MERLIN_ADDRESS_LEN 9 // read 9 address bits
+#define MERLIN_COMMAND_OFFSET 11 // skip 11 bits (start bit + address)
+#define MERLIN_COMMAND_LEN 32 // read up to 32 command bits
+#define MERLIN_COMPLETE_DATA_LEN 45 // complete length incl. start bit
+#define MERLIN_FRAME_REPEAT_PAUSE_TIME 50.0e-3 // 50 msec pause between frames, don't know if it is correct
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * ORTEK (Hama): 6 address bits + 2 frame type bits + 6 command bits + 1 parity bit + 1 unknown bit + "1" + "0"
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define ORTEK_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse
+#define ORTEK_START_BIT_PAUSE_TIME 1000.0e-6 // 1000 usec pause
+#define ORTEK_BIT_TIME 500.0e-6 // 500 usec pulse/pause
+#define ORTEK_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
+#define ORTEK_ADDRESS_OFFSET 0 // skip 0 bits
+#define ORTEK_ADDRESS_LEN 8 // read 6 address bits + 2 special bits
+#define ORTEK_COMMAND_OFFSET 8 // skip 6 address bits + 2 special bits
+#define ORTEK_COMMAND_LEN 6 // read 6 command bits
+#define ORTEK_COMPLETE_DATA_LEN 18 // complete length
+#define ORTEK_STOP_BIT 0 // has no stop bit
+#define ORTEK_LSB 0 // MSB...LSB
+#define ORTEK_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * TELEFUNKEN:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define TELEFUNKEN_START_BIT_PULSE_TIME 600.0e-6 // 600 usec pulse
+#define TELEFUNKEN_START_BIT_PAUSE_TIME 1500.0e-6 // 1500 usec pause
+#define TELEFUNKEN_PULSE_TIME 600.0e-6 // 600 usec pulse
+#define TELEFUNKEN_1_PAUSE_TIME 1500.0e-6 // 1500 usec pause
+#define TELEFUNKEN_0_PAUSE_TIME 600.0e-6 // 600 usec pause
+#define TELEFUNKEN_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after XX ms ?????
+#define TELEFUNKEN_ADDRESS_OFFSET 0 // skip 0 bits
+#define TELEFUNKEN_ADDRESS_LEN 0 // read 0 address bits
+#define TELEFUNKEN_COMMAND_OFFSET 0 // skip 0 bits
+#define TELEFUNKEN_COMMAND_LEN 15 // read 15 bits
+#define TELEFUNKEN_COMPLETE_DATA_LEN 15 // complete length
+#define TELEFUNKEN_STOP_BIT 1 // has stop bit
+#define TELEFUNKEN_LSB 0 // LSB...MSB
+#define TELEFUNKEN_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * ROOMBA
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define ROOMBA_START_BIT_PULSE_TIME 2790.0e-6 // 2790 usec pulse
+#define ROOMBA_START_BIT_PAUSE_TIME 930.0e-6 // 930 usec pause
+#define ROOMBA_0_PULSE_TIME 930.0e-6 // 930 usec pulse
+#define ROOMBA_1_PULSE_TIME 2790.0e-6 // 2790 usec pulse
+#define ROOMBA_0_PAUSE_TIME 2790.0e-6 // 2790 usec pause
+#define ROOMBA_1_PAUSE_TIME 930.0e-6 // 930 usec pause
+#define ROOMBA_FRAME_REPEAT_PAUSE_TIME 18.0e-3 // frame repeat after 18ms
+#define ROOMBA_ADDRESS_OFFSET 0 // skip 0 bits
+#define ROOMBA_ADDRESS_LEN 0 // read 0 address bits
+#define ROOMBA_COMMAND_OFFSET 0 // skip 0 bits
+#define ROOMBA_COMMAND_LEN 7 // read 7 bits
+#define ROOMBA_COMPLETE_DATA_LEN 7 // complete length
+#define ROOMBA_STOP_BIT 0 // has stop bit (fm: sure?)
+#define ROOMBA_LSB 0 // MSB...LSB
+#define ROOMBA_FLAGS 0 // flags
+#define ROOMBA_FRAMES 8 // ROOMBA sends 8 frames (this is a lie, but more comfortable)
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * RC-MM (32, 24, or 12 bit)
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define RCMM32_START_BIT_PULSE_TIME 500.0e-6 // 500 usec pulse
+#define RCMM32_START_BIT_PAUSE_TIME 220.0e-6 // 220 usec pause
+#define RCMM32_PULSE_TIME 230.0e-6 // 230 usec pulse
+#define RCMM32_00_PAUSE_TIME 220.0e-6 // 220 usec pause
+#define RCMM32_01_PAUSE_TIME 370.0e-6 // 370 usec pause
+#define RCMM32_10_PAUSE_TIME 540.0e-6 // 540 usec pause
+#define RCMM32_11_PAUSE_TIME 720.0e-6 // 720 usec pause
+
+#define RCMM32_FRAME_REPEAT_PAUSE_TIME 80.0e-3 // frame repeat after 80 ms
+#define RCMM32_ADDRESS_OFFSET 0 // skip 0 bits
+#define RCMM32_ADDRESS_LEN 16 // read 16 address bits
+#define RCMM32_COMMAND_OFFSET 17 // skip 17 bits
+#define RCMM32_COMMAND_LEN 15 // read 15 bits
+#define RCMM32_COMPLETE_DATA_LEN 32 // complete length
+#define RCMM32_STOP_BIT 1 // has stop bit
+#define RCMM32_LSB 0 // LSB...MSB
+#define RCMM32_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * PENTAX:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define PENTAX_START_BIT_PULSE_TIME 13000.0e-6 // 13 msec pulse
+#define PENTAX_START_BIT_PAUSE_TIME 3000.0e-6 // 3 msec pause
+#define PENTAX_PULSE_TIME 1000.0e-6 // 1 msec pulse
+#define PENTAX_1_PAUSE_TIME 3000.0e-6 // 3 msec pause
+#define PENTAX_0_PAUSE_TIME 1000.0e-6 // 1 msec pause
+#define PENTAX_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
+#define PENTAX_ADDRESS_OFFSET 0 // skip 0 bits
+#define PENTAX_ADDRESS_LEN 0 // read 0 address bits
+#define PENTAX_COMMAND_OFFSET 0 // skip 0 bits
+#define PENTAX_COMMAND_LEN 6 // read 6 bits
+#define PENTAX_COMPLETE_DATA_LEN 6 // complete length
+#define PENTAX_STOP_BIT 1 // has stop bit
+#define PENTAX_LSB 0 // LSB...MSB
+#define PENTAX_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * ACP24: Stiebel Eltron ACP24 air conditioner
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define ACP24_START_BIT_PULSE_TIME 390.0e-6 // 390 usec pulse
+#define ACP24_START_BIT_PAUSE_TIME 950.0e-6 // 950 usec pause
+#define ACP24_PULSE_TIME 390.0e-6 // 390 usec pulse
+#define ACP24_1_PAUSE_TIME 1300.0e-6 // 1300 usec pause
+#define ACP24_0_PAUSE_TIME 950.0e-6 // 950 usec pause
+#define ACP24_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms?
+#define ACP24_ADDRESS_OFFSET 0 // skip 0 bits
+#define ACP24_ADDRESS_LEN 0 // read 6 address bits
+#define ACP24_COMMAND_OFFSET 0 // skip 6 bits
+#define ACP24_COMMAND_LEN 0 // read 0 bits (70 bits will be read and compressed by special routine)
+#define ACP24_COMPLETE_DATA_LEN 70 // complete length
+#define ACP24_STOP_BIT 1 // has stop bit
+#define ACP24_LSB 0 // LSB...MSB
+#define ACP24_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * IRMP16:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define IRMP16_START_BIT_PULSE_TIME 842.0e-6 // 842 usec pulse (32 x 1/38kHz)
+#define IRMP16_START_BIT_PAUSE_TIME 1052.0e-6 // 1052 usec pause (40 x 1/38kHz)
+#define IRMP16_PULSE_TIME 421.0e-6 // 421 usec pulse (16 x 1/38kHz)
+#define IRMP16_1_PAUSE_TIME 842.0e-6 // 842 usec pause (32 x 1/38kHz)
+#define IRMP16_0_PAUSE_TIME 421.0e-6 // 421 usec pause (16 x 1/38kHz)
+#define IRMP16_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
+#define IRMP16_ADDRESS_OFFSET 0 // skip 0 bits
+#define IRMP16_ADDRESS_LEN 0 // read 0 address bits
+#define IRMP16_COMMAND_OFFSET 0 // skip 0 bits
+#define IRMP16_COMMAND_LEN 16 // read 16 bits (12 command + 4 CRC)
+#define IRMP16_COMPLETE_DATA_LEN 16 // complete length
+#define IRMP16_STOP_BIT 1 // has stop bit
+#define IRMP16_LSB 1 // LSB...MSB
+#define IRMP16_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * GREE - climate:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define GREE_START_BIT_PULSE_TIME 12000.0e-6 // 12000 usec pulse (32 x 1/38kHz)
+#define GREE_START_BIT_PAUSE_TIME 6000.0e-6 // 6000 usec pause (40 x 1/38kHz)
+#define GREE_PULSE_TIME 900.0e-6 // 900 usec pulse (16 x 1/38kHz)
+#define GREE_1_PAUSE_TIME 700.0e-6 // 700 usec pause (32 x 1/38kHz)
+#define GREE_0_PAUSE_TIME 2100.0e-6 // 2100 usec pause (16 x 1/38kHz)
+#define GREE_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
+#define GREE_ADDRESS_OFFSET 0 // skip 0 bits
+#define GREE_ADDRESS_LEN 16 // read 16 address bits
+#define GREE_COMMAND_OFFSET 16 // skip 16 bits
+#define GREE_COMMAND_LEN 16 // read 16 bits
+#define GREE_COMPLETE_DATA_LEN 32 // complete length
+#define GREE_STOP_BIT 1 // has stop bit
+#define GREE_LSB 1 // LSB...MSB
+#define GREE_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * METZ:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define METZ_START_BIT_PULSE_TIME 870.0e-6 // 870 usec pulse
+#define METZ_START_BIT_PAUSE_TIME 2300.0e-6 // 2300 usec pause
+#define METZ_PULSE_TIME 435.0e-6 // 435 usec pulse
+#define METZ_1_PAUSE_TIME 1680.0e-6 // 1680 usec pause
+#define METZ_0_PAUSE_TIME 960.0e-6 // 960 usec pause
+#define METZ_FRAME_REPEAT_PAUSE_TIME 122.0e-3 // frame repeat after 122ms
+#define METZ_ADDRESS_OFFSET 1 // skip 1 bit (toggle bit)
+#define METZ_ADDRESS_LEN 6 // read 6 address bits
+#define METZ_COMMAND_OFFSET 7 // skip 7 bits
+#define METZ_COMMAND_LEN 13 // read 13 bits
+#define METZ_COMPLETE_DATA_LEN 20 // complete length
+#define METZ_STOP_BIT 0 // has no stop bit
+#define METZ_LSB 0 // MSB...LSB
+#define METZ_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * RADIO1 - e.g. Tevion
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define RADIO1_START_BIT_PULSE_TIME 3000.0e-6 // 3000 usec pulse
+#define RADIO1_START_BIT_PAUSE_TIME 7000.0e-6 // 7000 usec pulse
+#define RADIO1_0_PULSE_TIME 500.0e-6 // 500 usec pulse
+#define RADIO1_0_PAUSE_TIME 1000.0e-6 // 1000 usec pause
+#define RADIO1_1_PULSE_TIME 1000.0e-6 // 1000 usec pulse
+#define RADIO1_1_PAUSE_TIME 500.0e-6 // 500 usec pause
+
+#define RADIO1_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
+#define RADIO1_ADDRESS_OFFSET 4 // skip 4 bits
+#define RADIO1_ADDRESS_LEN 16 // read 16 address bits
+#define RADIO1_COMMAND_OFFSET 20 // skip 4 + 16 bits
+#define RADIO1_COMMAND_LEN 3 // read 3 command bits
+#define RADIO1_COMPLETE_DATA_LEN 23 // complete length
+#define RADIO1_STOP_BIT 1 // has stop bit
+#define RADIO1_LSB 1 // LSB...MSB?
+#define RADIO1_FLAGS 0 // flags
+
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * Frame Repetitions:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#define AUTO_FRAME_REPETITION_TIME 80.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms
+
+#endif // _IRMP_PROTOCOLS_H_
projects / libsigrokdecode.git / commitdiff