can_fd/arbitrary_traffic/README: Minor capitalization fixes.

diff --git a/can/can_fd/arbitrary_traffic/README b/can/can_fd/arbitrary_traffic/README
index a4c5f9cd354260adc90dcadeab7f6fca0563f5e2..6b16668d3a7880bb9adc92597647a9222c58446d 100644 (file)
--- a/can/can_fd/arbitrary_traffic/README
+++ b/can/can_fd/arbitrary_traffic/README
@@ -13,7 +13,7 @@ Logic analyzer setup
 --------------------
 
 The logic analyzer used was a Dreamsoucelab DSLogic Plus at a sample rate of
-100Mhz.
+100MHz.
 
 Channel 0 was hooked up to a PEAK-PCAN-USB Pro CAN-FD device which has two
 CAN ports. Both ports were connected together using a selfmade circuit board.
@@ -30,17 +30,17 @@ port. All ACKs were handled by the participants.
 can_fd_std_without_brs_8.sr
 ---------------------------
 
-This shows a single CAN-FD message with 8 Bytes of data without
+This shows a single CAN-FD message with 8 bytes of data without
 Bitrate Switch (BRS).
 
 Nominal bitrate: 1M (CLK: 80MHz, BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
 Data bitrate: 2M (ignored, since BRS is disabled)
-Extended frame: no
-BRS: no
-11898-1 ISO-mode: on
+Extended frame: No
+BRS: No
+11898-1 ISO-mode: On
 ID: 0x42
 Length: 8 bytes
-Data is counting up from 0x00 to 0x07.
+Data is counting up from 0x00 to 0x07
 
 
 can_fd_without_brs_64.sr
@@ -49,128 +49,128 @@ can_fd_without_brs_64.sr
 This shows a single CAN-FD message with 64 bytes of data without
 Bitrate Switch (BRS).
 
-Host Clock: 80Mhz
+Host Clock: 80MHz
 Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
 Data Bitrate: 2M (Ignored, since BRS is disabled)
 Extended Frame: No
 BRS: No
 11898-1 ISO-Mode: On
 ID: 0x42
-Length: 8 Bytes
+Length: 8 bytes
 Data is counting up from 0x00 to 0x07
 
 
 can_fd_std_without_brs_64.sr
 ----------------------------
 
-This shows a single CAN-FD message with 64 Bytes of data without
+This shows a single CAN-FD message with 64 bytes of data without
 Bitrate Switch (BRS).
 
-Host Clock: 80Mhz
+Host Clock: 80MHz
 Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
 Data Bitrate: 2M (Ignored, since BRS is disabled)
 Extended Frame: No
 BRS: No
 11898-1 ISO-Mode: On
 ID: 0x42
-Length: 64 Bytes
+Length: 64 bytes
 Data is counting up from 0x00 to 0x3F
 
 
 can_fd_ext_without_brs_8.sr
 ---------------------------
 
-This shows a single CAN-FD message with 8 Bytes of data without
+This shows a single CAN-FD message with 8 bytes of data without
 Bitrate Switch (BRS).
 
-Host Clock: 80Mhz
+Host Clock: 80MHz
 Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
 Data Bitrate: 2M (Ignored, since BRS is disabled)
 Extended Frame: Yes
 BRS: No
 11898-1 ISO-Mode: On
 ID: 0x42
-Length: 8 Bytes
+Length: 8 bytes
 Data is counting up from 0x00 to 0x07
 
 
 can_fd_ext_without_brs_64.sr
 ----------------------------
 
-This shows a single CAN-FD message with 64 Bytes of data without
+This shows a single CAN-FD message with 64 bytes of data without
 Bitrate Switch (BRS).
 
-Host Clock: 80Mhz
+Host Clock: 80MHz
 Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
 Data Bitrate: 2M (Ignored, since BRS is disabled)
 Extended Frame: Yes
 BRS: No
 11898-1 ISO-Mode: On
 ID: 0x42
-Length: 64 Bytes
+Length: 64 bytes
 Data is counting up from 0x00 to 0x3F
 
 
 can_fd_std_brs_8.sr
 -------------------
 
-This shows a single CAN-FD message with 64 Bytes of data with Bitrate Switch (BRS).
+This shows a single CAN-FD message with 64 bytes of data with Bitrate Switch (BRS).
 
-Host Clock: 80Mhz
+Host Clock: 80MHz
 Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
 Data Bitrate: 2M (BRP: 4, TSeg1: 7, Tseg2: 2, Sjw: 1, SPP: 80%)
 Extended Frame: No
 BRS: Yes
 11898-1 ISO-Mode: On
 ID: 0x42
-Length: 8 Bytes
+Length: 8 bytes
 Data is counting up from 0x00 to 0x07
 
 
 can_fd_std_brs_64.sr
 --------------------
 
-This shows a single CAN-FD message with 64 Bytes of data with Bitrate Switch (BRS).
+This shows a single CAN-FD message with 64 bytes of data with Bitrate Switch (BRS).
 
-Host Clock: 80Mhz
+Host Clock: 80MHz
 Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
 Data Bitrate: 2M (BRP: 4, TSeg1: 7, Tseg2: 2, Sjw: 1, SPP: 80%)
 Extended Frame: No
 BRS: Yes
 11898-1 ISO-Mode: On
 ID: 0x42
-Length: 64 Bytes
+Length: 64 bytes
 Data is counting up from 0x00 to 0x3F
 
 
 can_fd_ext_brs_8.sr
 -------------------
 
-This shows a single CAN-FD message with 64 Bytes of data with Bitrate Switch (BRS).
+This shows a single CAN-FD message with 64 bytes of data with Bitrate Switch (BRS).
 
-Host Clock: 80Mhz
+Host Clock: 80MHz
 Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
 Data Bitrate: 2M (BRP: 4, TSeg1: 7, Tseg2: 2, Sjw: 1, SPP: 80%)
 Extended Frame: Yes
 BRS: Yes
 11898-1 ISO-Mode: On
 ID: 0x42
-Length: 8 Bytes
+Length: 8 bytes
 Data is counting up from 0x00 to 0x07
 
 
 can_fd_ext_brs_64.sr
 --------------------
 
-This shows a single CAN-FD message with 64 Bytes of data with Bitrate Switch (BRS).
+This shows a single CAN-FD message with 64 bytes of data with Bitrate Switch (BRS).
 
-Host Clock: 80Mhz
+Host Clock: 80MHz
 Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
 Data Bitrate: 2M (BRP: 4, TSeg1: 7, Tseg2: 2, Sjw: 1, SPP: 80%)
 Extended Frame: Yes
 BRS: Yes
 11898-1 ISO-Mode: On
 ID: 0x42
-Length: 64 Bytes
+Length: 64 bytes
 Data is counting up from 0x00 to 0x3F