spci-pps: Add profile for Agilent N5767A DC source

diff --git a/src/hardware/scpi-pps/profiles.c b/src/hardware/scpi-pps/profiles.c
index a532e792b0aeca9034df0d0fd8e6d329d0d40c50..6f77de120a07416a6e83876b2cce7d75a89fbc65 100644 (file)
--- a/src/hardware/scpi-pps/profiles.c
+++ b/src/hardware/scpi-pps/profiles.c
@@ -31,6 +31,7 @@ const char *pps_vendors[][2] = {
        { "HEWLETT-PACKARD", "HP" },
        { "PHILIPS", "Philips" },
        { "Chroma ATE", "Chroma" },
+       { "Agilent Technologies", "Agilent" },
 };
 
 const char *get_vendor(const char *raw_vendor)
@@ -47,6 +48,55 @@ const char *get_vendor(const char *raw_vendor)
 
 static const uint32_t devopts_none[] = { };
 
+/* Agilent/Keysight N5700A series */
+static const uint32_t agilent_n5700a_devopts[] = {
+       SR_CONF_CONTINUOUS | SR_CONF_SET,
+};
+
+static const uint32_t agilent_n5700a_devopts_cg[] = {
+       SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
+       SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
+       SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
+       SR_CONF_OUTPUT_VOLTAGE | SR_CONF_GET,
+       SR_CONF_OUTPUT_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+       SR_CONF_OUTPUT_CURRENT | SR_CONF_GET,
+       SR_CONF_OUTPUT_ENABLED | SR_CONF_GET | SR_CONF_SET,
+};
+
+const struct channel_spec agilent_n5767a_ch[] = {
+       { "1", { 0, 60, 0.0001 }, { 0, 25, 0.1 } },
+};
+
+const struct channel_group_spec agilent_n5767a_cg[] = {
+       { "1", CH_IDX(0), PPS_OVP | PPS_OCP },
+};
+
+/*
+ * TODO: OVER_CURRENT_PROTECTION_ACTIVE status can be determined by the OC bit
+ * in STAT:QUES:EVEN?, but this is not implemented
+ */
+const struct scpi_command agilent_n5700a_cmd[] = {
+       { SCPI_CMD_REMOTE, "SYST:COMM:RLST REM" },
+       { SCPI_CMD_LOCAL, "SYST:COMM:RLST LOC" },
+       { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
+       { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" },
+       { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
+       { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" },
+       { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
+       { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
+       { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP:STAT?" },
+       { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" },
+       { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" },
+       { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT?" },
+       { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT %.6f" },
+       { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":CURR:PROT:STAT?" },
+       { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":CURR:PROT:STAT ON?"},
+       { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":CURR:PROT:STAT OFF?"},
+       /* Current limit (CC mode) and OCP are set using the same cmd. sad */
+       { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR?" },
+       { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR %.6f" },
+};
+
 /* Chroma 61600 series AC source */
 static const uint32_t chroma_61604_devopts[] = {
        SR_CONF_CONTINUOUS | SR_CONF_SET,
@@ -353,6 +403,15 @@ const struct scpi_command philips_pm2800_cmd[] = {
 };
 
 SR_PRIV const struct scpi_pps pps_profiles[] = {
+       /* Agilent N5767A */
+       { "Agilent", "N5767A", 0,
+               ARRAY_AND_SIZE(agilent_n5700a_devopts),
+               ARRAY_AND_SIZE(agilent_n5700a_devopts_cg),
+               ARRAY_AND_SIZE(agilent_n5767a_ch),
+               ARRAY_AND_SIZE(agilent_n5767a_cg),
+               ARRAY_AND_SIZE(agilent_n5700a_cmd),
+               .probe_channels = NULL,
+       },
        /* Chroma 61604 */
        { "Chroma", "61604", 0,
                ARRAY_AND_SIZE(chroma_61604_devopts),