]> sigrok.org Git - sigrok-cli.git/commitdiff
cli: use SR_DF_META_*, support for analog packets
authorBert Vermeulen <redacted>
Sun, 22 Apr 2012 22:27:30 +0000 (00:27 +0200)
committerBert Vermeulen <redacted>
Wed, 30 May 2012 21:55:36 +0000 (23:55 +0200)
sigrok-cli.c

index 300c621b967acbfe32c3a7bc8ac865bd0b9a2cde..edd5d4e962432a35876a73f1e5c2383a5c135e0d 100644 (file)
@@ -341,17 +341,23 @@ static void show_pd_detail(void)
 static void datafeed_in(struct sr_dev *dev, struct sr_datafeed_packet *packet)
 {
        static struct sr_output *o = NULL;
-       static int probelist[SR_MAX_NUM_PROBES + 1] = { 0 };
+       static int logic_probelist[SR_MAX_NUM_PROBES] = { 0 };
+       static int analog_probelist[SR_MAX_NUM_PROBES] = { 0 };
        static uint64_t received_samples = 0;
        static int unitsize = 0;
        static int triggered = 0;
        static FILE *outfile = NULL;
+       static int num_analog_probes = 0;
        struct sr_probe *probe;
        struct sr_datafeed_header *header;
        struct sr_datafeed_logic *logic;
+       struct sr_datafeed_meta_logic *meta_logic;
+       struct sr_datafeed_analog *analog;
+       struct sr_datafeed_meta_analog *meta_analog;
        int num_enabled_probes, sample_size, ret, i;
        uint64_t output_len, filter_out_len;
        uint8_t *output_buf, *filter_out;
+       float asample1, asample2;
 
        /* If the first packet to come in isn't a header, don't even try. */
        if (packet->type != SR_DF_HEADER && o == NULL)
@@ -375,41 +381,8 @@ static void datafeed_in(struct sr_dev *dev, struct sr_datafeed_packet *packet)
                                exit(1);
                        }
                }
-
-               header = packet->payload;
-               num_enabled_probes = 0;
-               for (i = 0; i < header->num_logic_probes; i++) {
-                       probe = g_slist_nth_data(dev->probes, i);
-                       if (probe->enabled)
-                               probelist[num_enabled_probes++] = probe->index;
-               }
-               /* How many bytes we need to store num_enabled_probes bits */
-               unitsize = (num_enabled_probes + 7) / 8;
-
-               outfile = stdout;
-               if (opt_output_file) {
-                       if (default_output_format) {
-                               /* output file is in session format, which means we'll
-                                * dump everything in the datastore as it comes in,
-                                * and save from there after the session. */
-                               outfile = NULL;
-                               ret = sr_datastore_new(unitsize, &(dev->datastore));
-                               if (ret != SR_OK) {
-                                       g_critical("Failed to create datastore.");
-                                       exit(1);
-                               }
-                       } else {
-                               /* saving to a file in whatever format was set
-                                * with -O, so all we need is a filehandle */
-                               outfile = g_fopen(opt_output_file, "wb");
-                       }
-               }
-               if (opt_pds) {
-                       if (srd_session_start(num_enabled_probes, unitsize,
-                                       header->samplerate) != SRD_OK)
-                               sr_session_halt();
-               }
                break;
+
        case SR_DF_END:
                g_debug("cli: Received SR_DF_END");
                if (!o) {
@@ -437,6 +410,7 @@ static void datafeed_in(struct sr_dev *dev, struct sr_datafeed_packet *packet)
                g_free(o);
                o = NULL;
                break;
+
        case SR_DF_TRIGGER:
                g_debug("cli: received SR_DF_TRIGGER");
                if (o->format->event)
@@ -444,67 +418,159 @@ static void datafeed_in(struct sr_dev *dev, struct sr_datafeed_packet *packet)
                                         &output_len);
                triggered = 1;
                break;
+
+       case SR_DF_META_LOGIC:
+               g_message("cli: Received SR_DF_META_LOGIC");
+               meta_logic = packet->payload;
+               num_enabled_probes = 0;
+               for (i = 0; i < meta_logic->num_probes; i++) {
+                       probe = g_slist_nth_data(dev->probes, i);
+                       if (probe->enabled)
+                               logic_probelist[num_enabled_probes++] = probe->index;
+               }
+               /* How many bytes we need to store num_enabled_probes bits */
+               unitsize = (num_enabled_probes + 7) / 8;
+
+               outfile = stdout;
+               if (opt_output_file) {
+                       if (default_output_format) {
+                               /* output file is in session format, which means we'll
+                                * dump everything in the datastore as it comes in,
+                                * and save from there after the session. */
+                               outfile = NULL;
+                               ret = sr_datastore_new(unitsize, &(dev->datastore));
+                               if (ret != SR_OK) {
+                                       printf("Failed to create datastore.\n");
+                                       exit(1);
+                               }
+                       } else {
+                               /* saving to a file in whatever format was set
+                                * with --format, so all we need is a filehandle */
+                               outfile = g_fopen(opt_output_file, "wb");
+                       }
+               }
+               if (opt_pds)
+                       srd_session_start(num_enabled_probes, unitsize,
+                                       meta_logic->samplerate);
+               break;
+
        case SR_DF_LOGIC:
                logic = packet->payload;
-               sample_size = logic->unitsize;
                g_message("cli: received SR_DF_LOGIC, %"PRIu64" bytes", logic->length);
-               break;
-       }
+               sample_size = logic->unitsize;
+               if (logic->length == 0)
+                       break;
 
-       /* not supporting anything but SR_DF_LOGIC for now */
+               /* Don't store any samples until triggered. */
+               if (opt_wait_trigger && !triggered)
+                       break;
 
-       if (sample_size == -1 || logic->length == 0)
-               return;
+               if (limit_samples && received_samples >= limit_samples)
+                       break;
 
-       /* Don't store any samples until triggered. */
-       if (opt_wait_trigger && !triggered)
-               return;
+               ret = sr_filter_probes(sample_size, unitsize, logic_probelist,
+                                          logic->data, logic->length,
+                                          &filter_out, &filter_out_len);
+               if (ret != SR_OK)
+                       break;
 
-       if (limit_samples && received_samples >= limit_samples)
-               return;
+               /* what comes out of the filter is guaranteed to be packed into the
+                * minimum size needed to support the number of samples at this sample
+                * size. however, the driver may have submitted too much -- cut off
+                * the buffer of the last packet according to the sample limit.
+                */
+               if (limit_samples && (received_samples + logic->length / sample_size >
+                               limit_samples * sample_size))
+                       filter_out_len = limit_samples * sample_size - received_samples;
 
-       /* TODO: filters only support SR_DF_LOGIC */
-       ret = sr_filter_probes(sample_size, unitsize, probelist,
-                                  logic->data, logic->length,
-                                  &filter_out, &filter_out_len);
-       if (ret != SR_OK)
-               return;
+               if (dev->datastore)
+                       sr_datastore_put(dev->datastore, filter_out,
+                                        filter_out_len, sample_size, logic_probelist);
 
-       /* what comes out of the filter is guaranteed to be packed into the
-        * minimum size needed to support the number of samples at this sample
-        * size. however, the driver may have submitted too much -- cut off
-        * the buffer of the last packet according to the sample limit.
-        */
-       if (limit_samples && (received_samples + logic->length / sample_size >
-                       limit_samples * sample_size))
-               filter_out_len = limit_samples * sample_size - received_samples;
+               if (opt_output_file && default_output_format)
+                       /* saving to a session file, don't need to do anything else
+                        * to this data for now. */
+                       goto cleanup;
 
-       if (dev->datastore)
-               sr_datastore_put(dev->datastore, filter_out,
-                                filter_out_len, sample_size, probelist);
+               if (opt_pds) {
+                       if (srd_session_send(received_samples, (uint8_t*)filter_out,
+                                       filter_out_len) != SRD_OK)
+                               sr_session_halt();
+               } else {
+                       output_len = 0;
+                       if (o->format->data && packet->type == o->format->df_type)
+                               o->format->data(o, filter_out, filter_out_len, &output_buf, &output_len);
+                       if (output_len) {
+                               fwrite(output_buf, 1, output_len, outfile);
+                               g_free(output_buf);
+                       }
+               }
 
-       if (opt_output_file && default_output_format)
-               /* saving to a session file, don't need to do anything else
-                * to this data for now. */
-               goto cleanup;
+               cleanup:
+               g_free(filter_out);
+               received_samples += logic->length / sample_size;
+               break;
 
-       if (opt_pds) {
-               if (srd_session_send(received_samples, (uint8_t*)filter_out,
-                               filter_out_len) != SRD_OK)
-                       sr_session_halt();
-       } else {
-               output_len = 0;
-               if (o->format->data && packet->type == o->format->df_type)
-                       o->format->data(o, filter_out, filter_out_len, &output_buf, &output_len);
-               if (output_len) {
-                       fwrite(output_buf, 1, output_len, outfile);
-                       g_free(output_buf);
+       case SR_DF_META_ANALOG:
+               g_message("cli: Received SR_DF_META_ANALOG");
+               meta_analog = packet->payload;
+               num_analog_probes = meta_analog->num_probes;
+               num_enabled_probes = 0;
+               for (i = 0; i < num_analog_probes; i++) {
+                       probe = g_slist_nth_data(dev->probes, i);
+                       if (probe->enabled)
+                               analog_probelist[num_enabled_probes++] = probe->index;
                }
+
+               outfile = stdout;
+               if (opt_output_file) {
+                       if (default_output_format) {
+                               /* output file is in session format, which means we'll
+                                * dump everything in the datastore as it comes in,
+                                * and save from there after the session. */
+                               outfile = NULL;
+                               ret = sr_datastore_new(unitsize, &(dev->datastore));
+                               if (ret != SR_OK) {
+                                       printf("Failed to create datastore.\n");
+                                       exit(1);
+                               }
+                       } else {
+                               /* saving to a file in whatever format was set
+                                * with --format, so all we need is a filehandle */
+                               outfile = g_fopen(opt_output_file, "wb");
+                       }
+               }
+//             if (opt_pds)
+//                     srd_session_start(num_enabled_probes, unitsize,
+//                                     meta_logic->samplerate);
+               break;
+
+       case SR_DF_ANALOG:
+               analog = packet->payload;
+               g_message("cli: received SR_DF_ANALOG, %d samples", analog->num_samples);
+               if (analog->num_samples == 0)
+                       break;
+
+               if (limit_samples && received_samples >= limit_samples)
+                       break;
+
+               for (i = 0; i < analog->num_samples; i++) {
+                       asample1 = analog->data[i * num_analog_probes];
+                       asample2 = analog->data[i * num_analog_probes + 1];
+                       printf("CH1 %f   CH2 %f\n", asample1, asample2);
+//                     write(STDOUT_FILENO, &asample1, sizeof(float));
+               }
+
+//             output_len = 0;
+//             if (o->format->data && packet->type == o->format->df_type)
+//                     o->format->data(o, filter_out, filter_out_len, &output_buf, &output_len);
+
+               received_samples += analog->num_samples;
+
+       default:
+               g_message("received unknown packet type %d", packet->type);
        }
 
-cleanup:
-       g_free(filter_out);
-       received_samples += logic->length / sample_size;
 }
 
 /* Register the given PDs for this session.