#include <inttypes.h>
#include <arpa/inet.h>
#include <glib.h>
-#include "sigrok.h"
+#include <sigrok.h>
-#define NUM_PROBES 32
+#define NUM_PROBES 32
#define NUM_TRIGGER_STAGES 4
#define TRIGGER_TYPES "01"
#define SERIAL_SPEED B115200
/* TODO: SERIAL_ bits, parity, stop bit */
-#define CLOCK_RATE 100000000
+#define CLOCK_RATE 100000000
-
-/* command opcodes */
-#define CMD_RESET 0x00
-#define CMD_ID 0x02
-#define CMD_SET_FLAGS 0x82
+/* Command opcodes */
+#define CMD_RESET 0x00
+#define CMD_ID 0x02
+#define CMD_SET_FLAGS 0x82
#define CMD_SET_DIVIDER 0x80
-#define CMD_RUN 0x01
-#define CMD_CAPTURE_SIZE 0x81
+#define CMD_RUN 0x01
+#define CMD_CAPTURE_SIZE 0x81
#define CMD_SET_TRIGGER_MASK_0 0xc0
#define CMD_SET_TRIGGER_MASK_1 0xc4
#define CMD_SET_TRIGGER_MASK_2 0xc8
#define CMD_SET_TRIGGER_MASK_3 0xcc
-#define CMD_SET_TRIGGER_VALUE_0 0xc1
-#define CMD_SET_TRIGGER_VALUE_1 0xc5
-#define CMD_SET_TRIGGER_VALUE_2 0xc9
-#define CMD_SET_TRIGGER_VALUE_3 0xcd
+#define CMD_SET_TRIGGER_VALUE_0 0xc1
+#define CMD_SET_TRIGGER_VALUE_1 0xc5
+#define CMD_SET_TRIGGER_VALUE_2 0xc9
+#define CMD_SET_TRIGGER_VALUE_3 0xcd
#define CMD_SET_TRIGGER_CONFIG_0 0xc2
#define CMD_SET_TRIGGER_CONFIG_1 0xc6
#define CMD_SET_TRIGGER_CONFIG_2 0xca
#define CMD_SET_TRIGGER_CONFIG_3 0xce
-/* bitmasks for CMD_FLAGS */
-#define FLAG_DEMUX 0x01
+/* Bitmasks for CMD_FLAGS */
+#define FLAG_DEMUX 0x01
#define FLAG_FILTER 0x02
-#define FLAG_CHANNELGROUP_1 0x04
-#define FLAG_CHANNELGROUP_2 0x08
-#define FLAG_CHANNELGROUP_3 0x10
-#define FLAG_CHANNELGROUP_4 0x20
-#define FLAG_CLOCK_EXTERNAL 0x40
-#define FLAG_CLOCK_INVERTED 0x80
-#define FLAG_RLE 0x0100
-
+#define FLAG_CHANNELGROUP_1 0x04
+#define FLAG_CHANNELGROUP_2 0x08
+#define FLAG_CHANNELGROUP_3 0x10
+#define FLAG_CHANNELGROUP_4 0x20
+#define FLAG_CLOCK_EXTERNAL 0x40
+#define FLAG_CLOCK_INVERTED 0x80
+#define FLAG_RLE 0x0100
static int capabilities[] = {
HWCAP_LOGIC_ANALYZER,
HWCAP_SAMPLERATE,
HWCAP_CAPTURE_RATIO,
HWCAP_LIMIT_SAMPLES,
- 0
+ 0,
};
static struct samplerates samplerates = {
10,
MHZ(200),
1,
- 0
+ 0,
};
-/* list of struct serial_device_instance */
+/* List of struct serial_device_instance */
static GSList *device_instances = NULL;
-/* current state of the flag register */
+/* Current state of the flag register */
static uint32_t flag_reg = 0;
static uint64_t cur_samplerate = 0;
static uint64_t limit_samples = 0;
-/* pre/post trigger capture ratio, in percentage. 0 means no pre-trigger data. */
+/*
+ * Pre/post trigger capture ratio, in percentage.
+ * 0 means no pre-trigger data.
+ */
static int capture_ratio = 0;
-static uint32_t probe_mask = 0xffffffff, trigger_mask[4] = {0}, trigger_value[4] = {0};
-
-
+static uint32_t probe_mask = 0xffffffff;
+static uint32_t trigger_mask[4] = { 0, 0, 0, 0 };
+static uint32_t trigger_value[4] = { 0, 0, 0, 0 };
static int send_shortcommand(int fd, uint8_t command)
{
g_message("ols: sending cmd 0x%.2x", command);
buf[0] = command;
- if(write(fd, buf, 1) != 1)
+ if (write(fd, buf, 1) != 1)
return SIGROK_ERR;
return SIGROK_OK;
}
-
static int send_longcommand(int fd, uint8_t command, uint32_t data)
{
char buf[5];
buf[2] = (data & 0xff0000) >> 16;
buf[3] = (data & 0xff00) >> 8;
buf[4] = data & 0xff;
- if(write(fd, buf, 5) != 5)
+ if (write(fd, buf, 5) != 5)
return SIGROK_ERR;
return SIGROK_OK;
char *tc;
probe_mask = 0;
- for(i = 0; i < NUM_TRIGGER_STAGES; i++) {
+ for (i = 0; i < NUM_TRIGGER_STAGES; i++) {
trigger_mask[i] = 0;
trigger_value[i] = 0;
}
- for(l = probes; l; l = l->next) {
- probe = (struct probe *) l->data;
- if(!probe->enabled)
+ for (l = probes; l; l = l->next) {
+ probe = (struct probe *)l->data;
+ if (!probe->enabled)
continue;
- /* set up the probe mask for later configuration into the flag register */
+ /*
+ * Set up the probe mask for later configuration into the
+ * flag register.
+ */
probe_bit = 1 << (probe->index - 1);
probe_mask |= probe_bit;
- if(probe->trigger)
+ if (probe->trigger)
continue;
- /* configure trigger mask and value */
+ /* Configure trigger mask and value. */
stage = 0;
- for(tc = probe->trigger; tc && *tc; tc++) {
+ for (tc = probe->trigger; tc && *tc; tc++) {
trigger_mask[stage] |= probe_bit;
- if(*tc == '1')
+ if (*tc == '1')
trigger_value[stage] |= probe_bit;
stage++;
- if(stage > 3)
- /* TODO: only supporting parallel mode, with up to 4 stages */
+ if (stage > 3)
+ /*
+ * TODO: Only supporting parallel mode, with
+ * up to 4 stages.
+ */
return SIGROK_ERR;
}
}
return SIGROK_OK;
}
-
-static void byteswap(uint32_t *in)
+static void byteswap(uint32_t * in)
{
uint32_t out;
out |= (*in & 0xff0000) << 8;
out |= (*in & 0xff000000) >> 8;
*in = out;
-
}
-
static int hw_init(char *deviceinfo)
{
struct sigrok_device_instance *sdi;
int devcnt, final_devcnt, num_ports, fd, ret, i;
char buf[8], **device_names, **serial_params;
- if(deviceinfo)
+ if (deviceinfo)
ports = g_slist_append(NULL, strdup(deviceinfo));
else
- /* no specific device given, so scan all serial ports */
+ /* No specific device given, so scan all serial ports. */
ports = list_serial_ports();
num_ports = g_slist_length(ports);
fds = calloc(1, num_ports * sizeof(GPollFD));
- device_names = malloc(num_ports * (sizeof(char *)));
- serial_params = malloc(num_ports * (sizeof(char *)));
+ device_names = malloc(num_ports * sizeof(char *));
+ serial_params = malloc(num_ports * sizeof(char *));
devcnt = 0;
- for(l = ports; l; l = l->next) {
- /* The discovery procedure is like this: first send the Reset command (0x00) 5 times,
- * since the device could be anywhere in a 5-byte command. Then send the ID command
- * (0x02). If the device responds with 4 bytes ("OLS1" or "SLA1"), we have a match.
- * Since it may take the device a while to respond at 115Kb/s, we do all the sending
- * first, then wait for all of them to respond with g_poll().
+ for (l = ports; l; l = l->next) {
+ /* The discovery procedure is like this: first send the Reset
+ * command (0x00) 5 times, since the device could be anywhere
+ * in a 5-byte command. Then send the ID command (0x02).
+ * If the device responds with 4 bytes ("OLS1" or "SLA1"), we
+ * have a match.
+ *
+ * Since it may take the device a while to respond at 115Kb/s,
+ * we do all the sending first, then wait for all of them to
+ * respond with g_poll().
*/
- g_message("probing %s...", (char *) l->data);
+ g_message("probing %s...", (char *)l->data);
fd = serial_open(l->data, O_RDWR | O_NONBLOCK);
- if(fd != -1) {
+ if (fd != -1) {
serial_params[devcnt] = serial_backup_params(fd);
serial_set_params(fd, 115200, 8, 0, 1, 2);
ret = SIGROK_OK;
- for(i = 0; i < 5; i++) {
- if( (ret = send_shortcommand(fd, CMD_RESET)) != SIGROK_OK) {
- /* serial port is not writable */
+ for (i = 0; i < 5; i++) {
+ if ((ret = send_shortcommand(fd,
+ CMD_RESET)) != SIGROK_OK) {
+ /* Serial port is not writable. */
break;
}
}
- if(ret != SIGROK_OK) {
- serial_restore_params(fd, serial_params[devcnt]);
+ if (ret != SIGROK_OK) {
+ serial_restore_params(fd,
+ serial_params[devcnt]);
serial_close(fd);
continue;
}
free(l->data);
}
- /* 2ms should do it, that's enough time for 28 bytes to go over the bus */
+ /* 2ms should do (enough time for 28 bytes to go over the bus). */
usleep(2000);
final_devcnt = 0;
g_poll(fds, devcnt, 1);
- for(i = 0; i < devcnt; i++) {
- if(fds[i].revents == G_IO_IN) {
- if(read(fds[i].fd, buf, 4) == 4) {
- if(!strncmp(buf, "1SLO", 4) || !strncmp(buf, "1ALS", 4)) {
- if(!strncmp(buf, "1SLO", 4))
- sdi = sigrok_device_instance_new(final_devcnt, ST_INACTIVE,
- "Openbench", "Logic Sniffer", "v1.0");
+ for (i = 0; i < devcnt; i++) {
+ if (fds[i].revents == G_IO_IN) {
+ if (read(fds[i].fd, buf, 4) == 4) {
+ if (!strncmp(buf, "1SLO", 4)
+ || !strncmp(buf, "1ALS", 4)) {
+ if (!strncmp(buf, "1SLO", 4))
+ sdi = sigrok_device_instance_new
+ (final_devcnt, ST_INACTIVE,
+ "Openbench",
+ "Logic Sniffer", "v1.0");
else
- sdi = sigrok_device_instance_new(final_devcnt, ST_INACTIVE,
- "Sump", "Logic Analyzer", "v1.0");
- sdi->serial = serial_device_instance_new(device_names[i], -1);
- device_instances = g_slist_append(device_instances, sdi);
+ sdi = sigrok_device_instance_new
+ (final_devcnt, ST_INACTIVE,
+ "Sump", "Logic Analyzer",
+ "v1.0");
+ sdi->serial = serial_device_instance_new
+ (device_names[i], -1);
+ device_instances =
+ g_slist_append(device_instances, sdi);
final_devcnt++;
serial_close(fds[i].fd);
fds[i].fd = 0;
free(device_names[i]);
}
- if(fds[i].fd != 0) {
+ if (fds[i].fd != 0) {
serial_restore_params(fds[i].fd, serial_params[i]);
serial_close(fds[i].fd);
}
return final_devcnt;
}
-
static int hw_opendev(int device_index)
{
struct sigrok_device_instance *sdi;
- if(!(sdi = get_sigrok_device_instance(device_instances, device_index)))
+ if (!(sdi = get_sigrok_device_instance(device_instances, device_index)))
return SIGROK_ERR;
sdi->serial->fd = serial_open(sdi->serial->port, O_RDWR);
- if(sdi->serial->fd == -1)
+ if (sdi->serial->fd == -1)
return SIGROK_ERR;
sdi->status = ST_ACTIVE;
return SIGROK_OK;
}
-
static void hw_closedev(int device_index)
{
struct sigrok_device_instance *sdi;
- if(!(sdi = get_sigrok_device_instance(device_instances, device_index)))
+ if (!(sdi = get_sigrok_device_instance(device_instances, device_index)))
return;
- if(sdi->serial->fd != -1) {
+ if (sdi->serial->fd != -1) {
serial_close(sdi->serial->fd);
sdi->serial->fd = -1;
sdi->status = ST_INACTIVE;
}
-
}
-
static void hw_cleanup(void)
{
GSList *l;
struct sigrok_device_instance *sdi;
- /* properly close all devices */
- for(l = device_instances; l; l = l->next) {
+ /* Properly close all devices. */
+ for (l = device_instances; l; l = l->next) {
sdi = l->data;
- if(sdi->serial->fd != -1)
+ if (sdi->serial->fd != -1)
serial_close(sdi->serial->fd);
sigrok_device_instance_free(sdi);
}
g_slist_free(device_instances);
device_instances = NULL;
-
}
-
static void *hw_get_device_info(int device_index, int device_info_id)
{
struct sigrok_device_instance *sdi;
void *info;
- if( !(sdi = get_sigrok_device_instance(device_instances, device_index)) )
+ if (!(sdi = get_sigrok_device_instance(device_instances, device_index)))
return NULL;
info = NULL;
- switch(device_info_id)
- {
+ switch (device_info_id) {
case DI_INSTANCE:
info = sdi;
break;
info = &samplerates;
break;
case DI_TRIGGER_TYPES:
- info = (char *) TRIGGER_TYPES;
+ info = (char *)TRIGGER_TYPES;
break;
case DI_CUR_SAMPLERATE:
info = &cur_samplerate;
return info;
}
-
static int hw_get_status(int device_index)
{
struct sigrok_device_instance *sdi;
- if(!(sdi = get_sigrok_device_instance(device_instances, device_index)))
+ if (!(sdi = get_sigrok_device_instance(device_instances, device_index)))
return ST_NOT_FOUND;
return sdi->status;
}
-
static int *hw_get_capabilities(void)
{
-
return capabilities;
}
-
-static int set_configuration_samplerate(struct sigrok_device_instance *sdi, uint64_t samplerate)
+static int set_configuration_samplerate(struct sigrok_device_instance *sdi,
+ uint64_t samplerate)
{
uint32_t divider;
- if(samplerate < samplerates.low || samplerate > samplerates.high)
+ if (samplerate < samplerates.low || samplerate > samplerates.high)
return SIGROK_ERR_SAMPLERATE;
- if(samplerate > CLOCK_RATE) {
+ if (samplerate > CLOCK_RATE) {
flag_reg |= FLAG_DEMUX;
divider = (CLOCK_RATE * 2 / samplerate) - 1;
- }
- else {
+ } else {
flag_reg &= ~FLAG_DEMUX;
divider = (CLOCK_RATE / samplerate) - 1;
}
divider = htonl(divider);
- g_message("setting samplerate to %"PRIu64" Hz (divider %u, demux %s)", samplerate, divider,
- flag_reg & FLAG_DEMUX ? "on" : "off");
- if(send_longcommand(sdi->serial->fd, CMD_SET_DIVIDER, divider) != SIGROK_OK)
+ g_message("setting samplerate to %" PRIu64 " Hz (divider %u, demux %s)",
+ samplerate, divider, flag_reg & FLAG_DEMUX ? "on" : "off");
+
+ if (send_longcommand(sdi->serial->fd, CMD_SET_DIVIDER,
+ divider) != SIGROK_OK)
return SIGROK_ERR;
cur_samplerate = samplerate;
return SIGROK_OK;
}
-
static int hw_set_configuration(int device_index, int capability, void *value)
{
struct sigrok_device_instance *sdi;
int ret;
uint64_t *tmp_u64;
- if(!(sdi = get_sigrok_device_instance(device_instances, device_index)))
+ if (!(sdi = get_sigrok_device_instance(device_instances, device_index)))
return SIGROK_ERR;
- if(sdi->status != ST_ACTIVE)
+ if (sdi->status != ST_ACTIVE)
return SIGROK_ERR;
- if(capability == HWCAP_SAMPLERATE) {
+ if (capability == HWCAP_SAMPLERATE) {
tmp_u64 = value;
ret = set_configuration_samplerate(sdi, *tmp_u64);
- }
- else if(capability == HWCAP_PROBECONFIG)
- ret = configure_probes( (GSList *) value);
- else if(capability == HWCAP_LIMIT_SAMPLES) {
+ } else if (capability == HWCAP_PROBECONFIG) {
+ ret = configure_probes((GSList *) value);
+ } else if (capability == HWCAP_LIMIT_SAMPLES) {
limit_samples = strtoull(value, NULL, 10);
ret = SIGROK_OK;
- }
- else if(capability == HWCAP_CAPTURE_RATIO) {
+ } else if (capability == HWCAP_CAPTURE_RATIO) {
capture_ratio = strtol(value, NULL, 10);
- if(capture_ratio < 0 || capture_ratio > 100) {
+ if (capture_ratio < 0 || capture_ratio > 100) {
capture_ratio = 0;
ret = SIGROK_ERR;
- }
- else
+ } else
ret = SIGROK_OK;
- }
- else
+ } else {
ret = SIGROK_ERR;
+ }
return ret;
}
-
static int receive_data(int fd, int revents, void *user_data)
{
static unsigned int num_transfers = 0;
static int num_bytes = 0;
- static char last_sample[4] = {0xff};
- static unsigned char sample[4] = {0}, tmp_sample[4];
+ static char last_sample[4] = { 0xff, 0xff, 0xff, 0xff };
+ static unsigned char sample[4] = { 0, 0, 0, 0 };
+ static unsigned char tmp_sample[4];
int count, buflen, num_channels, i, j;
struct datafeed_packet packet;
unsigned char byte, *buffer;
- if(num_transfers++ == 0) {
- /* first time round, means the device started sending data, and will not
- * stop until done. if it stops sending for longer than it takes to send
- * a byte, that means it's finished. we'll double that to 30ms to be sure...
+ if (num_transfers++ == 0) {
+ /*
+ * First time round, means the device started sending data,
+ * and will not stop until done. If it stops sending for
+ * longer than it takes to send a byte, that means it's
+ * finished. We'll double that to 30ms to be sure...
*/
source_remove(fd);
source_add(fd, G_IO_IN, 100, receive_data, user_data);
}
num_channels = 0;
- for(i = 0x20; i > 0x02; i /= 2)
- if((flag_reg & i) == 0)
+ for (i = 0x20; i > 0x02; i /= 2) {
+ if ((flag_reg & i) == 0)
num_channels++;
+ }
- if(revents == G_IO_IN && num_transfers / num_channels <= limit_samples) {
- if(read(fd, &byte, 1) != 1)
+ if (revents == G_IO_IN
+ && num_transfers / num_channels <= limit_samples) {
+ if (read(fd, &byte, 1) != 1)
return FALSE;
sample[num_bytes++] = byte;
- if(num_bytes == num_channels) {
- /* got a full sample */
- if(flag_reg & FLAG_RLE) {
- /* in RLE mode -1 should never come in as a sample, because
- * bit 31 is the "count" flag */
- /* TODO: endianness may be wrong here, could be sample[3] */
- if(sample[0] & 0x80 && !(last_sample[0] & 0x80)) {
- count = (int) (*sample) & 0x7fffffff;
+ if (num_bytes == num_channels) {
+ /* Got a full sample. */
+ if (flag_reg & FLAG_RLE) {
+ /*
+ * In RLE mode -1 should never come in as a
+ * sample, because bit 31 is the "count" flag.
+ * TODO: Endianness may be wrong here, could be
+ * sample[3].
+ */
+ if (sample[0] & 0x80
+ && !(last_sample[0] & 0x80)) {
+ count = (int)(*sample) & 0x7fffffff;
buffer = g_malloc(count);
buflen = 0;
- for(i = 0; i < count; i++)
- {
- memcpy(buffer + buflen , last_sample, 4);
+ for (i = 0; i < count; i++) {
+ memcpy(buffer + buflen,
+ last_sample, 4);
buflen += 4;
}
- }
- else {
- /* just a single sample, next sample will probably be a count
- * referring to this -- but this one is still a part of the stream
+ } else {
+ /*
+ * Just a single sample, next sample
+ * will probably be a count referring
+ * to this -- but this one is still a
+ * part of the stream.
*/
buffer = sample;
buflen = 4;
}
- }
- else {
- /* no compression */
+ } else {
+ /* No compression. */
buffer = sample;
buflen = 4;
}
- if(num_channels < 4) {
- /* some channel groups may have been turned off, to speed up transfer
- * between the hardware and the PC. expand that here before submitting
- * it over the session bus -- whatever is listening on the bus will be
- * expecting a full 32-bit sample, based on the number of probes.
+ if (num_channels < 4) {
+ /*
+ * Some channel groups may have been turned
+ * off, to speed up transfer between the
+ * hardware and the PC. Expand that here before
+ * submitting it over the session bus --
+ * whatever is listening on the bus will be
+ * expecting a full 32-bit sample, based on
+ * the number of probes.
*/
j = 0;
memset(tmp_sample, 0, 4);
- for(i = 0; i < 4; i++) {
- if((flag_reg & (8 >> i)) == 0) {
- /* this channel group was enabled, copy from received sample */
+ for (i = 0; i < 4; i++) {
+ if ((flag_reg & (8 >> i)) == 0) {
+ /*
+ * This channel group was
+ * enabled, copy from received
+ * sample.
+ */
tmp_sample[i] = sample[j++];
}
}
memcpy(sample, tmp_sample, 4);
}
- /* send it all to the session bus */
+ /* Send it all to the session bus. */
packet.type = DF_LOGIC32;
packet.length = buflen;
packet.payload = buffer;
session_bus(user_data, &packet);
- if(buffer == sample)
+ if (buffer == sample)
memcpy(last_sample, buffer, num_channels);
else
g_free(buffer);
memset(sample, 0, 4);
num_bytes = 0;
}
- }
- else {
- /* this is the main loop telling us a timeout was reached, or we've
- * acquired all the samples we asked for -- we're done */
+ } else {
+ /*
+ * This is the main loop telling us a timeout was reached, or
+ * we've acquired all the samples we asked for -- we're done.
+ */
tcflush(fd, TCIOFLUSH);
serial_close(fd);
packet.type = DF_END;
return TRUE;
}
-
static int hw_start_acquisition(int device_index, gpointer session_device_id)
{
+ int i;
struct datafeed_packet *packet;
struct datafeed_header *header;
struct sigrok_device_instance *sdi;
- int i;
uint32_t data;
uint16_t readcount, delaycount;
uint8_t changrp_mask;
- if(!(sdi = get_sigrok_device_instance(device_instances, device_index)))
+ if (!(sdi = get_sigrok_device_instance(device_instances, device_index)))
return SIGROK_ERR;
- if(sdi->status != ST_ACTIVE)
+ if (sdi->status != ST_ACTIVE)
return SIGROK_ERR;
- if(trigger_mask[0]) {
- /* trigger masks */
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0, trigger_mask[0]) != SIGROK_OK)
+ if (trigger_mask[0]) {
+ /* Trigger masks */
+ if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0,
+ trigger_mask[0]) != SIGROK_OK)
return SIGROK_ERR;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_1, trigger_mask[1]) != SIGROK_OK)
+ if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_1,
+ trigger_mask[1]) != SIGROK_OK)
return SIGROK_ERR;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_2, trigger_mask[2]) != SIGROK_OK)
+ if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_2,
+ trigger_mask[2]) != SIGROK_OK)
return SIGROK_ERR;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_3, trigger_mask[3]) != SIGROK_OK)
+ if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_3,
+ trigger_mask[3]) != SIGROK_OK)
return SIGROK_ERR;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0, trigger_value[0]) != SIGROK_OK)
+ if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0,
+ trigger_value[0]) != SIGROK_OK)
return SIGROK_ERR;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_1, trigger_value[1]) != SIGROK_OK)
+ if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_1,
+ trigger_value[1]) != SIGROK_OK)
return SIGROK_ERR;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_2, trigger_value[2]) != SIGROK_OK)
+ if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_2,
+ trigger_value[2]) != SIGROK_OK)
return SIGROK_ERR;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_3, trigger_value[3]) != SIGROK_OK)
+ if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_3,
+ trigger_value[3]) != SIGROK_OK)
return SIGROK_ERR;
- /* trigger configuration */
- /* TODO: the start flag should only be on the last used stage I think... */
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0, 0x00000008) != SIGROK_OK)
+ /* Trigger configuration */
+ /*
+ * TODO: The start flag should only be on the last used
+ * stage I think...
+ */
+ if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0,
+ 0x00000008) != SIGROK_OK)
return SIGROK_ERR;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_1, 0x00000000) != SIGROK_OK)
+ if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_1,
+ 0x00000000) != SIGROK_OK)
return SIGROK_ERR;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_2, 0x00000000) != SIGROK_OK)
+ if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_2,
+ 0x00000000) != SIGROK_OK)
return SIGROK_ERR;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_3, 0x00000000) != SIGROK_OK)
+ if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_3,
+ 0x00000000) != SIGROK_OK)
return SIGROK_ERR;
delaycount = limit_samples / 4 * (capture_ratio / 100);
} else {
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0, trigger_mask[0]) != SIGROK_OK)
+ if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0,
+ trigger_mask[0]) != SIGROK_OK)
return SIGROK_ERR;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0, trigger_value[0]) != SIGROK_OK)
+ if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0,
+ trigger_value[0]) != SIGROK_OK)
return SIGROK_ERR;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0, 0x00000008) != SIGROK_OK)
+ if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0,
+ 0x00000008) != SIGROK_OK)
return SIGROK_ERR;
delaycount = limit_samples / 4;
}
set_configuration_samplerate(sdi, cur_samplerate);
- /* send sample limit and pre/post-trigger capture ratio */
+ /* Send sample limit and pre/post-trigger capture ratio. */
readcount = limit_samples / 4;
- if(flag_reg & FLAG_DEMUX) {
+ if (flag_reg & FLAG_DEMUX) {
data = (delaycount - 8) & 0xfff8 << 13;
data |= (readcount - 4) & 0xffff;
} else {
}
/* TODO: htonl()? */
byteswap(&data);
- if(send_longcommand(sdi->serial->fd, CMD_CAPTURE_SIZE, data) != SIGROK_OK)
+ if (send_longcommand(sdi->serial->fd, CMD_CAPTURE_SIZE,
+ data) != SIGROK_OK)
return SIGROK_ERR;
- /* flag register */
- /* enable/disable channel groups in the flag register according to the
- * probe mask. The register stores them backwards, hence shift right from 1000.
+ /*
+ * Enable/disable channel groups in the flag register according to the
+ * probe mask. The register stores them backwards, hence shift right
+ * from 1000.
*/
changrp_mask = 0;
- for(i = 0; i < 4; i++)
- {
- if(probe_mask & (0xff << (i * 8)))
+ for (i = 0; i < 4; i++) {
+ if (probe_mask & (0xff << (i * 8)))
changrp_mask |= (8 >> i);
}
- /* but the flag register wants them here, with 1 meaning "disable channel" */
+
+ /* The flag register wants them here, and 1 means "disable channel". */
flag_reg |= ~(changrp_mask << 2) & 0x3c;
data = flag_reg << 24;
- if(send_longcommand(sdi->serial->fd, CMD_SET_FLAGS, data) != SIGROK_OK)
+ if (send_longcommand(sdi->serial->fd, CMD_SET_FLAGS, data) != SIGROK_OK)
return SIGROK_ERR;
- /* start acquisition on the device */
- if(send_shortcommand(sdi->serial->fd, CMD_RUN) != SIGROK_OK)
+ /* Start acquisition on the device. */
+ if (send_shortcommand(sdi->serial->fd, CMD_RUN) != SIGROK_OK)
return SIGROK_ERR;
- source_add(sdi->serial->fd, G_IO_IN, -1, receive_data, session_device_id);
+ source_add(sdi->serial->fd, G_IO_IN, -1, receive_data,
+ session_device_id);
- /* send header packet to the session bus */
+ /* Send header packet to the session bus. */
packet = g_malloc(sizeof(struct datafeed_packet));
header = g_malloc(sizeof(struct datafeed_header));
- if(!packet || !header)
+ if (!packet || !header)
return SIGROK_ERR;
packet->type = DF_HEADER;
packet->length = sizeof(struct datafeed_header);
- packet->payload = (unsigned char *) header;
+ packet->payload = (unsigned char *)header;
header->feed_version = 1;
gettimeofday(&header->starttime, NULL);
header->samplerate = cur_samplerate;
return SIGROK_OK;
}
-
static void hw_stop_acquisition(int device_index, gpointer session_device_id)
{
struct datafeed_packet packet;
packet.type = DF_END;
packet.length = 0;
session_bus(session_device_id, &packet);
-
}
-
-
struct device_plugin ols_plugin_info = {
"sump",
1,
hw_init,
hw_cleanup,
-
hw_opendev,
hw_closedev,
hw_get_device_info,
hw_get_capabilities,
hw_set_configuration,
hw_start_acquisition,
- hw_stop_acquisition
+ hw_stop_acquisition,
};
-
projects / libsigrok.git / commitdiff