scpi-pps: Add support for OWON SPE6103

Signed-off-by: Sahaj Sarup <redacted>

diff --git a/src/hardware/scpi-pps/profiles.c b/src/hardware/scpi-pps/profiles.c
index e947f744a0dab2d71e3db594735740a0a50ac178..358e2701898b16e00caeb1ca26950e91caf3800f 100644 (file)
--- a/src/hardware/scpi-pps/profiles.c
+++ b/src/hardware/scpi-pps/profiles.c
@@ -1054,6 +1054,32 @@ static const struct scpi_command owon_p4000_cmd[] = {
        ALL_ZERO
 };
 
+/* Owon SPE series*/
+
+static const struct channel_spec owon_spe6103_ch[] = {
+       { "1", { 0.01, 60, 0.01, 3, 3 }, { 0.001, 10, 0.001, 3, 3 }, { 0, 300, 0, 3, 3 }, FREQ_DC_ONLY, { 0.01, 61, 0.01}, { 0.001, 10.1, 0.001} },
+};
+
+static const struct scpi_command owon_spe6103_cmd[] = {
+       { SCPI_CMD_REMOTE, "SYST:REM" },
+       { SCPI_CMD_LOCAL, "SYST:LOC" },
+       { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" },
+       { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" },
+       { SCPI_CMD_GET_MEAS_POWER, "MEAS:POW?" },
+       { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" },
+       { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" },
+       { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" },
+       { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" },
+       { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" },
+       { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP 1" },
+       { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP 0" },
+       { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:LIM?" },
+       { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:LIM %.6f" },
+       { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, "CURR:LIM?" },
+       { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, "CURR:LIM %.6f" },
+       ALL_ZERO
+};
+
 /* Philips/Fluke PM2800 series */
 static const uint32_t philips_pm2800_devopts[] = {
        SR_CONF_CONTINUOUS,
@@ -1683,6 +1709,17 @@ SR_PRIV const struct scpi_pps pps_profiles[] = {
                .update_status = NULL,
        },
 
+       { "OWON", "^SPE6103$", SCPI_DIALECT_UNKNOWN, 0,
+               ARRAY_AND_SIZE(owon_p4000_devopts),
+               ARRAY_AND_SIZE(owon_p4000_devopts_cg),
+               ARRAY_AND_SIZE(owon_spe6103_ch),
+               ARRAY_AND_SIZE(owon_p4000_cg),
+               owon_spe6103_cmd,
+               .probe_channels = NULL,
+               .init_acquisition = NULL,
+               .update_status = NULL,
+       },
+
        /* Philips/Fluke PM2800 series */
        { "Philips", "^PM28[13][123]/[01234]{1,2}$", SCPI_DIALECT_PHILIPS, 0,
                ARRAY_AND_SIZE(philips_pm2800_devopts),