* to NULL. Otherwise, it will be set to point to the newly allocated port.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_get_port_by_name(const char *portname, struct sp_port **port_ptr);
/**
* Free a port structure obtained from sp_get_port_by_name() or sp_copy_port().
+ *
+ * @since 0.1.0
*/
void sp_free_port(struct sp_port *port);
* to NULL. Otherwise, it will be set to point to the newly allocated array.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_list_ports(struct sp_port ***list_ptr);
* to NULL. Otherwise, it will be set to point to the newly allocated copy.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_copy_port(const struct sp_port *port, struct sp_port **copy_ptr);
*
* This will also free all the sp_port structures referred to from the list;
* any that are to be retained must be copied first using sp_copy_port().
+ *
+ * @since 0.1.0
*/
void sp_free_port_list(struct sp_port **ports);
* @param flags Flags to use when opening the serial port.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_open(struct sp_port *port, enum sp_mode flags);
* Close the specified serial port.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_close(struct sp_port *port);
* @return The port name, or NULL if an invalid port is passed. The name
* string is part of the port structure and may not be used after the
* port structure has been freed.
+ *
+ * @since 0.1.0
*/
char *sp_get_port_name(const struct sp_port *port);
* library's own usage of the port. Be careful.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_get_port_handle(const struct sp_port *port, void *result_ptr);
* @param config_ptr Pointer to variable to receive result.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_new_config(struct sp_port_config **config_ptr);
* Free a port configuration structure.
*
* @param config Pointer to configuration structure.
+ *
+ * @since 0.1.0
*/
void sp_free_config(struct sp_port_config *config);
* ignored by sp_set_config().
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_get_config(struct sp_port *port, struct sp_port_config *config);
* and the corresponding setting left unchanged on the port.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_config(struct sp_port *port, const struct sp_port_config *config);
* @param baudrate Baud rate in bits per second.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_baudrate(struct sp_port *port, int baudrate);
* @param baudrate_ptr Pointer to variable to store result.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_get_config_baudrate(const struct sp_port_config *config, int *baudrate_ptr);
* @param baudrate Baud rate in bits per second, or -1 to retain current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_config_baudrate(struct sp_port_config *config, int baudrate);
* @param bits Number of data bits.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_bits(struct sp_port *port, int bits);
* @param bits_ptr Pointer to variable to store result.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_get_config_bits(const struct sp_port_config *config, int *bits_ptr);
* @param bits Number of data bits, or -1 to retain current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_config_bits(struct sp_port_config *config, int bits);
* @param parity Parity setting.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_parity(struct sp_port *port, enum sp_parity parity);
* @param parity_ptr Pointer to variable to store result.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_get_config_parity(const struct sp_port_config *config, enum sp_parity *parity_ptr);
* @param parity Parity setting, or -1 to retain current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_config_parity(struct sp_port_config *config, enum sp_parity parity);
* @param stopbits Number of stop bits.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_stopbits(struct sp_port *port, int stopbits);
* @param stopbits_ptr Pointer to variable to store result.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_get_config_stopbits(const struct sp_port_config *config, int *stopbits_ptr);
* @param stopbits Number of stop bits, or -1 to retain current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_config_stopbits(struct sp_port_config *config, int stopbits);
* @param rts RTS pin mode.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_rts(struct sp_port *port, enum sp_rts rts);
* @param rts_ptr Pointer to variable to store result.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_get_config_rts(const struct sp_port_config *config, enum sp_rts *rts_ptr);
* @param rts RTS pin mode, or -1 to retain current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_config_rts(struct sp_port_config *config, enum sp_rts rts);
* @param cts CTS pin mode.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_cts(struct sp_port *port, enum sp_cts cts);
* @param cts_ptr Pointer to variable to store result.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_get_config_cts(const struct sp_port_config *config, enum sp_cts *cts_ptr);
* @param cts CTS pin mode, or -1 to retain current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_config_cts(struct sp_port_config *config, enum sp_cts cts);
* @param dtr DTR pin mode.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_dtr(struct sp_port *port, enum sp_dtr dtr);
* @param dtr_ptr Pointer to variable to store result.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_get_config_dtr(const struct sp_port_config *config, enum sp_dtr *dtr_ptr);
* @param dtr DTR pin mode, or -1 to retain current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_config_dtr(struct sp_port_config *config, enum sp_dtr dtr);
* @param dsr DSR pin mode.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_dsr(struct sp_port *port, enum sp_dsr dsr);
* @param dsr_ptr Pointer to variable to store result.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_get_config_dsr(const struct sp_port_config *config, enum sp_dsr *dsr_ptr);
* @param dsr DSR pin mode, or -1 to retain current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_config_dsr(struct sp_port_config *config, enum sp_dsr dsr);
* @param xon_xoff XON/XOFF mode.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_xon_xoff(struct sp_port *port, enum sp_xonxoff xon_xoff);
* @param xon_xoff_ptr Pointer to variable to store result.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_get_config_xon_xoff(const struct sp_port_config *config, enum sp_xonxoff *xon_xoff_ptr);
* @param xon_xoff XON/XOFF mode, or -1 to retain current setting.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_config_xon_xoff(struct sp_port_config *config, enum sp_xonxoff xon_xoff);
* @param flowcontrol Flow control setting to use.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_config_flowcontrol(struct sp_port_config *config, enum sp_flowcontrol flowcontrol);
* @param flowcontrol Flow control setting to use.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_set_flowcontrol(struct sp_port *port, enum sp_flowcontrol flowcontrol);
* timeout was reached before the requested number of bytes was
* available. If timeout is zero, the function will always return
* either the requested number of bytes or a negative error code.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_blocking_read(struct sp_port *port, void *buf, size_t count, unsigned int timeout);
* @return The number of bytes read on success, or a negative error code. The
* number of bytes returned may be any number from zero to the maximum
* that was requested.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_nonblocking_read(struct sp_port *port, void *buf, size_t count);
* either the requested number of bytes or a negative error code. In
* the event of an error there is no way to determine how many bytes
* were sent before the error occured.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_blocking_write(struct sp_port *port, const void *buf, size_t count, unsigned int timeout);
* @return The number of bytes written on success, or a negative error code.
* The number of bytes returned may be any number from zero to the
* maximum that was requested.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_nonblocking_write(struct sp_port *port, const void *buf, size_t count);
* @param port Pointer to port structure.
*
* @return Number of bytes waiting on success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_input_waiting(struct sp_port *port);
* @param port Pointer to port structure.
*
* @return Number of bytes waiting on success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_output_waiting(struct sp_port *port);
* @param buffers Which buffer(s) to flush.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_flush(struct sp_port *port, enum sp_buffer buffers);
* @param port Pointer to port structure.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_drain(struct sp_port *port);
* The result should be freed after use by calling sp_free_event_set().
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_new_event_set(struct sp_event_set **result_ptr);
* @param mask Bitmask of events to be waited for.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_add_port_events(struct sp_event_set *event_set,
const struct sp_port *port, enum sp_event mask);
* @param timeout Timeout in milliseconds, or zero to wait indefinitely.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_wait(struct sp_event_set *event_set, unsigned int timeout);
/**
* Free a structure allocated by sp_new_event_set().
+ *
+ * @since 0.1.0
*/
void sp_free_event_set(struct sp_event_set *event_set);
* @param signals Pointer to variable to receive result.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_get_signals(struct sp_port *port, enum sp_signal *signals);
* @param port Pointer to port structure.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_start_break(struct sp_port *port);
* @param port Pointer to port structure.
*
* @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
*/
enum sp_return sp_end_break(struct sp_port *port);
*
* @return The system's numeric code for the error that caused the last
* operation to fail.
+ *
+ * @since 0.1.0
*/
int sp_last_error_code(void);
* @return The system's message for the error that caused the last
* operation to fail. This string may be allocated by the function,
* and should be freed after use by calling sp_free_error_message().
+ *
+ * @since 0.1.0
*/
char *sp_last_error_message(void);
/**
* Free an error message returned by sp_last_error_message().
+ *
+ * @since 0.1.0
*/
void sp_free_error_message(char *message);
* argument list, in the same manner as e.g. printf().
*
* The default handler is sp_default_debug_handler().
+ *
+ * @since 0.1.0
*/
void sp_set_debug_handler(void (*handler)(const char *format, ...));
* This function prints debug messages to the standard error stream if the
* environment variable LIBSERIALPORT_DEBUG is set. Otherwise, they are
* ignored.
+ *
+ * @since 0.1.0
*/
void sp_default_debug_handler(const char *format, ...);