spi/ade7758: examples without CS pin

A short example of IRQ triggered SPI operation of the ADE7758 energy
measurement chip, showing it's use of spi mode 0,1 without a chip select
pin.

Signed-off-by: Karl Palsson <redacted>

diff --git a/spi/ade7758/README b/spi/ade7758/README
new file mode 100644 (file)
index 0000000..2b491fe
--- /dev/null
+++ b/spi/ade7758/README
@@ -0,0 +1,21 @@
+50MHz capture of an ADE7758 SPI communications.
+Note that Chip Select is _optional_ on this device, provided that you are
+careful to only use valid, full length spi read/write requests.
+
+In this case, the chip is configured to provide interrupts on voltage zero
+crossings, and the host MCU is reading the status register, and then the
+appropriate (phase B) voltage/current registers.
+
+It is largely an example of SPI without CS, in spi mode 0,1.
+
+Two captures are provided.
+ade7758-phaseB-zx-irq-context.sr: trigger with precapture on the IRQ pin falling edge.
+ade7758-phaseB-zx-irq-nocontext.sr: trigger on spi CLK rising edge.
+
+Correct decodings with the ADE7758 decoder should show
+RSTATUS: 0x400
+FREQ: 0x0 (frequency is from phase A, not connected on this device)
+BVRMS: 0x10cd0c (context) or 0x10ccfa (nocontext)
+BIRMS: 0x2ac    (context) or 0x2a8    (nocontext)
+
+Anything else has gotten the SPI decoding wrong due to the lack of chip select.

diff --git a/spi/ade7758/ade7758-phase-b-zx-irq-context.sr b/spi/ade7758/ade7758-phase-b-zx-irq-context.sr
new file mode 100644 (file)
index 0000000..a3e9d3f
Binary files /dev/null and b/spi/ade7758/ade7758-phase-b-zx-irq-context.sr differ

diff --git a/spi/ade7758/ade7758-phase-b-zx-irq-nocontext.sr b/spi/ade7758/ade7758-phase-b-zx-irq-nocontext.sr
new file mode 100644 (file)
index 0000000..c9b5630
Binary files /dev/null and b/spi/ade7758/ade7758-phase-b-zx-irq-nocontext.sr differ