* Close the ChronoVu LA8 USB port and reset the LA8 sequencer logic.
*
* @param ctx The struct containing private per-device-instance data.
- * @return SR_OK upon success, SR_ERR upon failure.
+ * @return SR_OK upon success, SR_ERR_ARG upon invalid arguments.
*/
static int la8_close_usb_reset_sequencer(struct context *ctx)
{
if (ctx->ftdic->usb_dev) {
/* Reset the LA8 sequencer logic, then wait 100ms. */
- sr_dbg("la8: resetting sequencer logic");
+ sr_dbg("la8: Resetting sequencer logic.");
(void) la8_write(ctx, buf, 8); /* Ignore errors. */
g_usleep(100 * 1000);
/* Purge FTDI buffers, then reset and close the FTDI device. */
- sr_dbg("la8: purging buffers, resetting+closing FTDI device");
+ sr_dbg("la8: Purging buffers, resetting+closing FTDI device.");
/* Log errors, but ignore them (i.e., don't abort). */
if ((ret = ftdi_usb_purge_buffers(ctx->ftdic)) < 0)
ret, ftdi_get_error_string(ctx->ftdic));
}
+ /* Close USB device, deinitialize and free the FTDI context. */
ftdi_free(ctx->ftdic); /* Returns void. */
ctx->ftdic = NULL;
return SR_ERR_ARG;
}
- sr_dbg("la8: resetting the device");
+ sr_dbg("la8: Resetting the device.");
/*
* Purge pending read data from the FTDI hardware FIFO until
/* Reset the LA8 sequencer logic and close the USB port. */
(void) la8_close_usb_reset_sequencer(ctx); /* Ignore errors. */
- sr_dbg("la8: device reset finished");
+ sr_dbg("la8: Device reset finished.");
return SR_OK;
}
}
}
- sr_dbg("la8: %s: trigger_mask = 0x%x, trigger_pattern = 0x%x",
- __func__, ctx->trigger_mask, ctx->trigger_pattern);
+ sr_dbg("la8: trigger_mask = 0x%x, trigger_pattern = 0x%x",
+ ctx->trigger_mask, ctx->trigger_pattern);
return SR_OK;
}
(void) la8_close_usb_reset_sequencer(ctx); /* Ignore errors. */
goto err_free_ftdic;
}
- sr_dbg("la8: found device");
+ sr_dbg("la8: Found LA8 device (%04x:%04x).", USB_VENDOR_ID,
+ USB_PRODUCT_ID);
/* Register the device with libsigrok. */
sdi = sr_dev_inst_new(0, SR_ST_INITIALIZING,
dev_insts = g_slist_append(dev_insts, sdi);
- sr_spew("la8: %s finished successfully", __func__);
+ sr_spew("la8: Device init successful.");
/* Close device. We'll reopen it again when we need it. */
(void) la8_close(ctx); /* Log, but ignore errors. */
return SR_ERR; /* TODO: SR_ERR_ARG? */
}
- sr_dbg("la8: opening device");
+ sr_dbg("la8: Opening LA8 device (%04x:%04x).", USB_VENDOR_ID,
+ USB_PRODUCT_ID);
/* Open the device. */
if ((ret = ftdi_usb_open_desc(ctx->ftdic, USB_VENDOR_ID,
(void) la8_close_usb_reset_sequencer(ctx); /* Ignore errors. */
return SR_ERR;
}
- sr_dbg("la8: device opened successfully");
+ sr_dbg("la8: Device opened successfully.");
/* Purge RX/TX buffers in the FTDI chip. */
if ((ret = ftdi_usb_purge_buffers(ctx->ftdic)) < 0) {
(void) la8_close_usb_reset_sequencer(ctx); /* Ignore errors. */
goto err_dev_open_close_ftdic;
}
- sr_dbg("la8: FTDI buffers purged successfully");
+ sr_dbg("la8: FTDI buffers purged successfully.");
/* Enable flow control in the FTDI chip. */
if ((ret = ftdi_setflowctrl(ctx->ftdic, SIO_RTS_CTS_HS)) < 0) {
(void) la8_close_usb_reset_sequencer(ctx); /* Ignore errors. */
goto err_dev_open_close_ftdic;
}
- sr_dbg("la8: FTDI flow control enabled successfully");
+ sr_dbg("la8: FTDI flow control enabled successfully.");
/* Wait 100ms. */
g_usleep(100 * 1000);
ctx = sdi->priv;
- sr_spew("la8: setting samplerate");
+ sr_spew("la8: Trying to set samplerate to %" PRIu64 "Hz.", samplerate);
fill_supported_samplerates_if_needed();
/* Set the new samplerate. */
ctx->cur_samplerate = samplerate;
- sr_dbg("la8: samplerate set to %" PRIu64 "Hz", ctx->cur_samplerate);
+ sr_dbg("la8: Samplerate set to %" PRIu64 "Hz.", ctx->cur_samplerate);
return SR_OK;
}
return SR_ERR; /* TODO: SR_ERR_ARG? */
}
- sr_dbg("la8: closing device");
+ sr_dbg("la8: Closing device.");
if (sdi->status == SR_ST_ACTIVE) {
- sr_dbg("la8: %s: status ACTIVE, closing device", __func__);
+ sr_dbg("la8: Status ACTIVE, closing device.");
/* TODO: Really ignore errors here, or return SR_ERR? */
(void) la8_close_usb_reset_sequencer(ctx); /* Ignore errors. */
} else {
- sr_spew("la8: %s: status not ACTIVE, nothing to do", __func__);
+ sr_spew("la8: Status not ACTIVE, nothing to do.");
}
sdi->status = SR_ST_INACTIVE;
- sr_dbg("la8: %s: freeing sample buffers", __func__);
+ sr_dbg("la8: Freeing sample buffer.");
g_free(ctx->final_buf);
return SR_OK;
struct context *ctx;
void *info;
- sr_spew("la8: entering %s", __func__);
-
if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) {
sr_err("la8: %s: sdi was NULL", __func__);
return NULL;
return NULL;
}
+ sr_spew("la8: %s: dev_index %d, dev_info_id %d.", __func__,
+ dev_index, dev_info_id);
+
switch (dev_info_id) {
case SR_DI_INST:
info = sdi;
+ sr_spew("la8: %s: Returning sdi.", __func__);
break;
case SR_DI_NUM_PROBES:
info = GINT_TO_POINTER(NUM_PROBES);
+ sr_spew("la8: %s: Returning number of probes: %d.", __func__,
+ NUM_PROBES);
break;
case SR_DI_PROBE_NAMES:
info = probe_names;
+ sr_spew("la8: %s: Returning probenames.", __func__);
break;
case SR_DI_SAMPLERATES:
fill_supported_samplerates_if_needed();
info = &samplerates;
+ sr_spew("la8: %s: Returning samplerates.", __func__);
break;
case SR_DI_TRIGGER_TYPES:
info = (char *)TRIGGER_TYPES;
+ sr_spew("la8: %s: Returning trigger types: %s.", __func__,
+ TRIGGER_TYPES);
break;
case SR_DI_CUR_SAMPLERATE:
info = &ctx->cur_samplerate;
+ sr_spew("la8: %s: Returning samplerate: %" PRIu64 "Hz.",
+ __func__, ctx->cur_samplerate);
break;
default:
/* Unknown device info ID, return NULL. */
return SR_ST_NOT_FOUND;
}
- sr_dbg("la8: %s: returning status %d", __func__, sdi->status);
+ sr_dbg("la8: Returning status: %d.", sdi->status);
return sdi->status;
}
static int *hw_hwcap_get_all(void)
{
- sr_spew("la8: entering %s", __func__);
+ sr_spew("la8: Returning list of device capabilities.");
return hwcaps;
}
struct sr_dev_inst *sdi;
struct context *ctx;
- sr_spew("la8: entering %s", __func__);
-
if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) {
sr_err("la8: %s: sdi was NULL", __func__);
return SR_ERR; /* TODO: SR_ERR_ARG? */
return SR_ERR; /* TODO: SR_ERR_ARG? */
}
+ sr_spew("la8: %s: dev_index %d, hwcap %d", __func__, dev_index, hwcap);
+
switch (hwcap) {
case SR_HWCAP_SAMPLERATE:
- if (set_samplerate(sdi, *(uint64_t *)value) == SR_ERR)
+ if (set_samplerate(sdi, *(uint64_t *)value) == SR_ERR) {
+ sr_err("la8: %s: setting samplerate failed.", __func__);
return SR_ERR;
+ }
sr_dbg("la8: SAMPLERATE = %" PRIu64, ctx->cur_samplerate);
break;
case SR_HWCAP_PROBECONFIG:
if (configure_probes(ctx, (GSList *)value) != SR_OK) {
- sr_err("la8: %s: probe config failed", __func__);
+ sr_err("la8: %s: probe config failed.", __func__);
return SR_ERR;
}
break;
case SR_HWCAP_LIMIT_MSEC:
if (*(uint64_t *)value == 0) {
- sr_err("la8: %s: LIMIT_MSEC can't be 0", __func__);
+ sr_err("la8: %s: LIMIT_MSEC can't be 0.", __func__);
return SR_ERR;
}
ctx->limit_msec = *(uint64_t *)value;
break;
case SR_HWCAP_LIMIT_SAMPLES:
if (*(uint64_t *)value < MIN_NUM_SAMPLES) {
- sr_err("la8: %s: LIMIT_SAMPLES too small", __func__);
+ sr_err("la8: %s: LIMIT_SAMPLES too small.", __func__);
return SR_ERR;
}
ctx->limit_samples = *(uint64_t *)value;
break;
default:
/* Unknown capability, return SR_ERR. */
- sr_err("la8: %s: Unknown capability", __func__);
+ sr_err("la8: %s: Unknown capability.", __func__);
return SR_ERR;
break;
}
/**
* Get a block of data from the LA8.
*
- * @param ctx The struct containing private per-device-instance data.
+ * @param ctx The struct containing private per-device-instance data. Must not
+ * be NULL. ctx->ftdic must not be NULL either.
* @return SR_OK upon success, or SR_ERR upon errors.
*/
static int la8_read_block(struct context *ctx)
/* Note: Caller checked that ctx and ctx->ftdic != NULL. */
- sr_spew("la8: %s: reading block %d", __func__, ctx->block_counter);
+ sr_spew("la8: Reading block %d.", ctx->block_counter);
bytes_read = la8_read(ctx, ctx->mangled_buf, BS);
/* If first block read got 0 bytes, retry until success or timeout. */
if ((bytes_read == 0) && (ctx->block_counter == 0)) {
do {
- sr_spew("la8: %s: reading block 0 again", __func__);
+ sr_spew("la8: Reading block 0 (again).");
bytes_read = la8_read(ctx, ctx->mangled_buf, BS);
/* TODO: How to handle read errors here? */
now = time(NULL);
/* Check if block read was successful or a timeout occured. */
if (bytes_read != BS) {
- sr_err("la8: %s: trigger timed out", __func__);
+ sr_err("la8: Trigger timed out. Bytes read: %d.", bytes_read);
(void) la8_reset(ctx); /* Ignore errors. */
return SR_ERR;
}
/* De-mangle the data. */
- sr_spew("la8: de-mangling samples of block %d", ctx->block_counter);
+ sr_spew("la8: Demangling block %d.", ctx->block_counter);
byte_offset = ctx->block_counter * BS;
m = byte_offset / (1024 * 1024);
mi = m * (1024 * 1024);
return TRUE;
}
- sr_dbg("la8: sampling finished, sending data to session bus now");
+ sr_dbg("la8: Sampling finished, sending data to session bus now.");
/* All data was received and demangled, send it to the session bus. */
for (i = 0; i < NUM_BLOCKS; i++)
uint8_t buf[4];
int bytes_written;
- sr_spew("la8: entering %s", __func__);
-
if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) {
sr_err("la8: %s: sdi was NULL", __func__);
return SR_ERR; /* TODO: SR_ERR_ARG? */
return SR_ERR;
}
+ sr_dbg("la8: Starting acquisition.");
+
/* Fill acquisition parameters into buf[]. */
buf[0] = ctx->divcount;
buf[1] = 0xff; /* This byte must always be 0xff. */
bytes_written = la8_write(ctx, buf, 4);
if (bytes_written < 0) {
- sr_err("la8: acquisition failed to start");
+ sr_err("la8: Acquisition failed to start.");
return SR_ERR;
} else if (bytes_written != 4) {
- sr_err("la8: acquisition failed to start");
+ sr_err("la8: Acquisition failed to start.");
return SR_ERR; /* TODO: Other error and return code? */
}
- sr_dbg("la8: acquisition started successfully");
+ sr_dbg("la8: Acquisition started successfully.");
ctx->session_id = session_data;
/* Send header packet to the session bus. */
- sr_dbg("la8: %s: sending SR_DF_HEADER", __func__);
+ sr_dbg("la8: Sending SR_DF_HEADER.");
packet.type = SR_DF_HEADER;
packet.payload = &header;
header.feed_version = 1;
struct context *ctx;
struct sr_datafeed_packet packet;
- sr_dbg("la8: stopping acquisition");
+ sr_dbg("la8: Stopping acquisition.");
if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) {
sr_err("la8: %s: sdi was NULL", __func__);
}
/* Send end packet to the session bus. */
- sr_dbg("la8: %s: sending SR_DF_END", __func__);
+ sr_dbg("la8: Sending SR_DF_END.");
packet.type = SR_DF_END;
sr_session_bus(session_data, &packet);
projects / libsigrok.git / commitdiff