libsigrokdecode
unreleased development snapshot
sigrok protocol decoding library
Main Page
Modules
Data Structures
Files
File List
Globals
irmp
irmpconfig.h
Go to the documentation of this file.
1
/*---------------------------------------------------------------------------------------------------------------------------------------------------
2
* irmpconfig.h
3
*
4
* DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H!
5
*
6
* Copyright (c) 2009-2019 Frank Meyer - frank(at)fli4l.de
7
* Extensions for PIC 12F1820 W.Strobl 2014-07-20
8
*
9
* This program is free software; you can redistribute it and/or modify
10
* it under the terms of the GNU General Public License as published by
11
* the Free Software Foundation; either version 2 of the License, or
12
* (at your option) any later version.
13
*---------------------------------------------------------------------------------------------------------------------------------------------------
14
*/
15
16
#ifndef _IRMP_H_
17
# error please include only irmp.h, not irmpconfig.h
18
#endif
19
20
#ifdef IRMPCONFIG_STAGE1_H
21
22
/*---------------------------------------------------------------------------------------------------------------------------------------------------
23
* Change IRMP_32_BIT here
24
*
25
* Normally, IRMP_32_BIT ist 0. Then we use irmp.command as a 16 bit value.
26
* If you set IRMP_32_BIT to 1, we will use irmp.command as a 32 bit value.
27
* A 32 bit command costs more CPU resources on 8 bit processors (e.g. AVR),
28
* but there are IR protocols which need more than 16 bits for a reasonable
29
* command value.
30
*
31
* If you want to use one of the following protocols, set IRMP_32_BIT to 1,
32
* otherwise set it to 0:
33
* - MERLIN
34
*---------------------------------------------------------------------------------------------------------------------------------------------------
35
*/
36
37
#define IRMP_32_BIT 1 // use 32 bit command value, 0 or 1
38
39
#endif // IRMPCONFIG_STAGE1_H
40
#ifdef IRMPCONFIG_STAGE2_H
41
42
/*---------------------------------------------------------------------------------------------------------------------------------------------------
43
* Change F_INTERRUPTS if you change the number of interrupts per second,
44
* Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000
45
* A value above 15000 costs additional program space, absolute maximum value is 20000.
46
* On PIC with XC8/C18 Compiler, use 15151 as the correct value.
47
*---------------------------------------------------------------------------------------------------------------------------------------------------
48
*/
49
#ifndef F_INTERRUPTS
50
# define F_INTERRUPTS 20000 // interrupts per second, min: 10000, max: 20000, typ: 15000
51
#endif
52
53
/*---------------------------------------------------------------------------------------------------------------------------------------------------
54
* Change settings from 1 to 0 if you want to disable one or more decoders.
55
* This saves program space.
56
*
57
* 1 enable decoder
58
* 0 disable decoder
59
*
60
* The standard decoders are enabled per default.
61
* Less common protocols are disabled here, you need to enable them manually.
62
*
63
* If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.
64
* If you don't need RC5 when using FDC/RCCAR, you should disable RC5.
65
* You cannot enable both DENON and RUWIDO, only enable one of them.
66
*---------------------------------------------------------------------------------------------------------------------------------------------------
67
*/
68
69
// typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space
70
#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes
71
#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE + ONKYO >= 10000 ~300 bytes
72
#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsg32 >= 10000 ~300 bytes
73
#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes
74
75
// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space
76
#define IRMP_SUPPORT_JVC_PROTOCOL 1 // JVC >= 10000 ~150 bytes
77
#define IRMP_SUPPORT_NEC16_PROTOCOL 1 // NEC16 >= 10000 ~100 bytes
78
#define IRMP_SUPPORT_NEC42_PROTOCOL 1 // NEC42 >= 10000 ~300 bytes
79
#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes
80
#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes
81
#define IRMP_SUPPORT_RC5_PROTOCOL 1 // RC5 >= 10000 ~250 bytes
82
#define IRMP_SUPPORT_RC6_PROTOCOL 1 // RC6 & RC6A >= 10000 ~250 bytes
83
#define IRMP_SUPPORT_IR60_PROTOCOL 1 // IR60 (SDA2008) >= 10000 ~300 bytes
84
#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 1 // Grundig >= 10000 ~300 bytes
85
#define IRMP_SUPPORT_SIEMENS_PROTOCOL 1 // Siemens Gigaset >= 15000 ~550 bytes
86
#define IRMP_SUPPORT_NOKIA_PROTOCOL 1 // Nokia >= 10000 ~300 bytes
87
88
// exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space
89
#define IRMP_SUPPORT_BOSE_PROTOCOL 1 // BOSE >= 10000 ~150 bytes
90
#define IRMP_SUPPORT_KATHREIN_PROTOCOL 1 // Kathrein >= 10000 ~200 bytes
91
#define IRMP_SUPPORT_NUBERT_PROTOCOL 1 // NUBERT >= 10000 ~50 bytes
92
#define IRMP_SUPPORT_FAN_PROTOCOL 0 // FAN (ventilator) >= 10000 ~50 bytes
93
#define IRMP_SUPPORT_SPEAKER_PROTOCOL 1 // SPEAKER (~NUBERT) >= 10000 ~50 bytes
94
#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // Bang & Olufsen >= 10000 ~200 bytes
95
#define IRMP_SUPPORT_RECS80_PROTOCOL 1 // RECS80 (SAA3004) >= 15000 ~50 bytes
96
#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 1 // RECS80EXT (SAA3008) >= 15000 ~50 bytes
97
#define IRMP_SUPPORT_THOMSON_PROTOCOL 1 // Thomson >= 10000 ~250 bytes
98
#define IRMP_SUPPORT_NIKON_PROTOCOL 1 // NIKON camera >= 10000 ~250 bytes
99
#define IRMP_SUPPORT_NETBOX_PROTOCOL 1 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)
100
#define IRMP_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 ~150 bytes
101
#define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL 1 // Telefunken 1560 >= 10000 ~150 bytes
102
#define IRMP_SUPPORT_FDC_PROTOCOL 1 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)
103
#define IRMP_SUPPORT_RCCAR_PROTOCOL 1 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)
104
#define IRMP_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes
105
#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes
106
#define IRMP_SUPPORT_A1TVBOX_PROTOCOL 1 // A1 TV BOX >= 15000 (better 20000) ~300 bytes
107
#define IRMP_SUPPORT_LEGO_PROTOCOL 1 // LEGO Power RC >= 20000 ~150 bytes
108
#define IRMP_SUPPORT_RCMM_PROTOCOL 1 // RCMM 12,24, or 32 >= 20000 ~150 bytes
109
#define IRMP_SUPPORT_LGAIR_PROTOCOL 1 // LG Air Condition >= 10000 ~300 bytes
110
#define IRMP_SUPPORT_SAMSUNG48_PROTOCOL 1 // Samsung48 >= 10000 ~100 bytes (SAMSUNG must be enabled!)
111
#define IRMP_SUPPORT_MERLIN_PROTOCOL 0 // Merlin >= 15000 (better 20000) ~300 bytes
112
#define IRMP_SUPPORT_PENTAX_PROTOCOL 0 // Pentax >= 10000 ~150 bytes
113
#define IRMP_SUPPORT_S100_PROTOCOL 0 // S100 >= 10000 ~250 bytes
114
#define IRMP_SUPPORT_ACP24_PROTOCOL 0 // ACP24 >= 10000 ~250 bytes
115
#define IRMP_SUPPORT_TECHNICS_PROTOCOL 1 // TECHNICS >= 10000 ~250 bytes
116
#define IRMP_SUPPORT_PANASONIC_PROTOCOL 0 // PANASONIC Beamer >= 10000 ~250 bytes
117
#define IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL 1 // Mitsubishi Aircond >= 10000 ~250 bytes
118
#define IRMP_SUPPORT_VINCENT_PROTOCOL 1 // VINCENT >= 10000 ~250 bytes
119
#define IRMP_SUPPORT_SAMSUNGAH_PROTOCOL 1 // SAMSUNG AH >= 10000 ~250 bytes
120
#define IRMP_SUPPORT_IRMP16_PROTOCOL 1 // IRMP specific >= 15000 ~250 bytes
121
#define IRMP_SUPPORT_GREE_PROTOCOL 0 // GREE CLIMATE >= 10000 ~250 bytes
122
#define IRMP_SUPPORT_RCII_PROTOCOL 0 // RCII T+A >= 15000 ~250 bytes
123
#define IRMP_SUPPORT_METZ_PROTOCOL 1 // METZ >= 15000 ~250 bytes
124
125
#define IRMP_SUPPORT_RADIO1_PROTOCOL 0 // RADIO, e.g. TEVION >= 10000 ~250 bytes (experimental)
126
127
/*---------------------------------------------------------------------------------------------------------------------------------------------------
128
* Change hardware pin here for ATMEL ATMega/ATTiny/XMega
129
*---------------------------------------------------------------------------------------------------------------------------------------------------
130
*/
131
#if defined (ATMEL_AVR) || defined (__AVR_XMEGA__) // use PB6 as IR input on AVR
132
# define IRMP_PORT_LETTER B
133
# define IRMP_BIT_NUMBER 6
134
135
/*---------------------------------------------------------------------------------------------------------------------------------------------------
136
* Change hardware pin here for PIC C18 or XC8 compiler
137
*---------------------------------------------------------------------------------------------------------------------------------------------------
138
*/
139
#elif defined (PIC_C18) // use RB4 as IR input on PIC (C18 or XC8 compiler)
140
# if defined(__12F1840)
141
# define IRMP_PIN RA5 // on 12F1840 with XC8 compiler
142
# else
143
# define IRMP_PIN PORTBbits.RB4 // PIC C18
144
# endif
145
146
/*---------------------------------------------------------------------------------------------------------------------------------------------------
147
* Change hardware pin here for PIC CCS compiler
148
*---------------------------------------------------------------------------------------------------------------------------------------------------
149
*/
150
#elif defined (PIC_CCS)
151
# define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC (CCS compiler)
152
153
/*---------------------------------------------------------------------------------------------------------------------------------------------------
154
* Change hardware pin here for ARM STM32
155
*---------------------------------------------------------------------------------------------------------------------------------------------------
156
*/
157
#elif defined (ARM_STM32) // use C13 as IR input on STM32
158
# define IRMP_PORT_LETTER C
159
# define IRMP_BIT_NUMBER 13
160
161
/*---------------------------------------------------------------------------------------------------------------------------------------------------
162
* Hardware pin for ARM STM32 (HAL) - don't change here, define IRMP_RECEIVE_GPIO_Port & IRMP_RECEIVE_PIN in STM32Cube (Main.h)
163
*---------------------------------------------------------------------------------------------------------------------------------------------------
164
*/
165
#elif defined (ARM_STM32_HAL) // STM32: IRMP_RECEIVE_GPIO_Port & IRMP_RECEIVE_PIN must be defined in STM32Cube
166
# define IRMP_PORT_LETTER IRMP_Receive_GPIO_Port
167
# define IRMP_BIT_NUMBER IRMP_Receive_Pin
168
169
/*---------------------------------------------------------------------------------------------------------------------------------------------------
170
* Change hardware pin here for Stellaris ARM Cortex M4
171
*---------------------------------------------------------------------------------------------------------------------------------------------------
172
*/
173
#elif defined (STELLARIS_ARM_CORTEX_M4) // use B4 as IR input on Stellaris LM4F
174
# define IRMP_PORT_LETTER B
175
# define IRMP_BIT_NUMBER 4
176
177
/*---------------------------------------------------------------------------------------------------------------------------------------------------
178
* Change hardware pin here for STM8
179
*---------------------------------------------------------------------------------------------------------------------------------------------------
180
*/
181
#elif defined (SDCC_STM8) // use PA1 as IR input on STM8
182
# define IRMP_PORT_LETTER A
183
# define IRMP_BIT_NUMBER 1
184
185
/*---------------------------------------------------------------------------------------------------------------------------------------------------
186
* Change hardware pin here for ESP8266
187
*---------------------------------------------------------------------------------------------------------------------------------------------------
188
*/
189
#elif defined (__xtensa__)
190
# define IRMP_BIT_NUMBER 12 // use GPIO12 (Pin 7 UEXT) on ESP8266-EVB evaluation board
191
192
/*---------------------------------------------------------------------------------------------------------------------------------------------------
193
* Change hardware pin here for Teensy 3.x with teensyduino gcc compiler
194
*---------------------------------------------------------------------------------------------------------------------------------------------------
195
*/
196
#elif defined (TEENSY_ARM_CORTEX_M4)
197
# define IRMP_PIN 1 // use Digital pin 1 as IR input on Teensy
198
199
/*---------------------------------------------------------------------------------------------------------------------------------------------------
200
* Change hardware pin here for MBED
201
*---------------------------------------------------------------------------------------------------------------------------------------------------
202
*/
203
#elif defined(__MBED__)
204
# define IRMP_PIN P0_22 // use P1_27 on LPC1347
205
# define IRMP_PINMODE PullUp // hardware dependent
206
207
/*---------------------------------------------------------------------------------------------------------------------------------------------------
208
* Change hardware pin here for ChibiOS HAL
209
*---------------------------------------------------------------------------------------------------------------------------------------------------
210
*/
211
#elif defined(_CHIBIOS_HAL_)
212
# define IRMP_PIN LINE_IR_IN // use pin names as defined in the board config file, prefixed with "LINE_"
213
# define IRMP_LOGGING_SD SD1 // the ChibiOS HAL Serial Driver instance to log to
214
// (when IRMP_LOGGING is enabled below).
215
// Make sure SERIAL_BUFFERS_SIZE is large enough when enabling logging
216
217
/*---------------------------------------------------------------------------------------------------------------------------------------------------
218
* Handling of unknown target system: DON'T CHANGE
219
*---------------------------------------------------------------------------------------------------------------------------------------------------
220
*/
221
#elif !defined (UNIX_OR_WINDOWS)
222
# error target system not defined.
223
#endif
224
225
/*---------------------------------------------------------------------------------------------------------------------------------------------------
226
* Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd
227
*---------------------------------------------------------------------------------------------------------------------------------------------------
228
*/
229
#ifndef IRMP_LOGGING
230
# define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not. default is 0
231
#endif
232
233
/*---------------------------------------------------------------------------------------------------------------------------------------------------
234
* Use external logging routines
235
* If you enable external logging, you have also to enable IRMP_LOGGING above
236
*---------------------------------------------------------------------------------------------------------------------------------------------------
237
*/
238
#ifndef IRMP_EXT_LOGGING
239
# define IRMP_EXT_LOGGING 0 // 1: use external logging, 0: do not. default is 0
240
#endif
241
242
/*---------------------------------------------------------------------------------------------------------------------------------------------------
243
* Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!
244
*---------------------------------------------------------------------------------------------------------------------------------------------------
245
*/
246
#ifndef IRMP_PROTOCOL_NAMES
247
# define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not. default is 0
248
#endif
249
250
/*---------------------------------------------------------------------------------------------------------------------------------------------------
251
* Use Callbacks to indicate input signal
252
*---------------------------------------------------------------------------------------------------------------------------------------------------
253
*/
254
#ifndef IRMP_USE_CALLBACK
255
# define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0
256
#endif
257
258
/*---------------------------------------------------------------------------------------------------------------------------------------------------
259
* Call the user-provided irmp_idle() function when IRMP is idle.
260
* Can be used to disable the timer irq and enter a sleep mode to save power
261
*---------------------------------------------------------------------------------------------------------------------------------------------------
262
*/
263
#ifndef IRMP_USE_IDLE_CALL
264
# define IRMP_USE_IDLE_CALL 0 // 1: use idle calls. 0: do not. default is 0
265
#endif
266
267
/*---------------------------------------------------------------------------------------------------------------------------------------------------
268
* Use ChibiOS Events to signal that valid IR data was received
269
*---------------------------------------------------------------------------------------------------------------------------------------------------
270
*/
271
#if defined(_CHIBIOS_RT_) || defined(_CHIBIOS_NIL_)
272
273
# ifndef IRMP_USE_EVENT
274
# define IRMP_USE_EVENT 0 // 1: use event. 0: do not. default is 0
275
# endif
276
277
# if IRMP_USE_EVENT == 1 && !defined(IRMP_EVENT_BIT)
278
# define IRMP_EVENT_BIT 1 // event flag or bit to send
279
# endif
280
# if IRMP_USE_EVENT == 1 && !defined(IRMP_EVENT_THREAD_PTR)
281
# define IRMP_EVENT_THREAD_PTR ir_receive_thread_p // pointer to the thread to send the event to
282
extern
thread_t *IRMP_EVENT_THREAD_PTR;
// the pointer must be defined and initialized elsewhere
283
# endif
284
285
#endif // _CHIBIOS_RT_ || _CHIBIOS_NIL_
286
287
#endif // _IRMPCONFIG_STAGE2_H_
Generated on Wed Feb 28 2024 07:47:38 for libsigrokdecode by
1.8.11