Voltcraft VC-940
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Status | supported |
---|---|
Source code | serial-dmm |
Counts | 40000/4000 |
IEC 61010-1 | CAT III (1000V) / CAT IV (600V) |
Connectivity | RS232 / USB |
Measurements | voltage, resistance, diode, continuity, capacitance, frequency, duty cycle, current, temperature |
Features | autorange, hold, relative, min/max, bargraph, backlight, true-rms |
Website | conrad.de |
The Voltcraft VC-940 is a 40000/4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.
This is a rebadged UNI-T UT71E.
See UNI-T UT71x series for information common to all devices in this series.
Hardware
Multimeter:
- Cyrustek ES51966F multimeter chip
- Texas Instruments MSP430F149 16 bit microcontroller with 60K flash and 2K RAM on board
- Texas Instruments MSP430FE425 16 bit microcontroller for energy meters with 16K flash and 512B RAM on board
- HOLTEK HT1621B 128 (32 x 4) pattern multi-function LCD driver
- PCB markings: The silkscreen reads "71E V20051120-3", but the correct "940" model indication is apparently added manually by UNI-T using a sticker.
RS232 cable:
USB cable:
Photos
Multimeter:
RS232 cable:
See Device cables#UNI-T_UT-D02.
USB cable:
See Device cables#UNI-T_UT-D04.
Protocol
See UNI-T UT71x series#Protocol.