Difference between revisions of "TODO"

From sigrok
Jump to navigation Jump to search
Line 10: Line 10:
* Scanalogic ([[User:Uwe Hermann|Uwe Hermann]]).
* Scanalogic ([[User:Uwe Hermann|Uwe Hermann]]).
* Rigol
* Rigol
** RAF: Used by DG1000Z, DG4000, and DG5000 series. See [http://www.batronix.com/pdf/Rigol/UserGuide/DG1000Z_UserGuide_EN.pdf DG100Z User Guide] page 2-75, also [http://www.eevblog.com/forum/testgear/rigol-dg4000-series-raf-file-format/msg559443/ this post] at eevblog.
** [[File format:ROF]]: Used by [[Rigol DP800 series|DP800 series]] power supplies
** RAF: Used by DG1000Z, DG4000, and DG5000 series signal generators. See [http://www.batronix.com/pdf/Rigol/UserGuide/DG1000Z_UserGuide_EN.pdf DG100Z User Guide] page 2-75, also [http://www.eevblog.com/forum/testgear/rigol-dg4000-series-raf-file-format/msg559443/ this post] at eevblog.


=== Input modules ===
=== Input modules ===

Revision as of 22:51, 2 December 2014

libsigrok

Hardware support

  • Clean up device-specific globals in hardware drivers, to properly permit multiple devices per driver: fx2lafw, zeroplus-logic-cube, others(?)
  • Asix SIGMA driver: support multiple devices properly (currently only one is supported).
  • Chronovu LA8/LA16 driver: support multiple devices properly (currently only one is supported).

Input/output modules

Input modules

  • Add OLS input module support.
  • Add gnuplot input module support (Uwe Hermann).

Miscellaneous

  • Check all public API calls to see whether they need an sr_context parameter.
  • sr_errno:
    • Most functions should return SR_OK or SR_ERR_* (same for SRD_OK etc).
    • Most backend functions return status as an integer, which is SR_OK if all went well, or SR_ERR_* if an error occurred.
    • However, there is no way to pass any information back as to what went wrong — and this is important for user-friendliness.
    • Perhaps an error code is not enough; maybe something like sigrok_errno(errorcode, "unsupported device") is better.
  • Support specifying the firmware directory at runtime.

libsigrokdecode

Major features

  • Add high-precision timer to runtc

Other

  • Test/implement support for multiple outputs of one PD, and stacking different additional PDs on those outputs.
  • Test/implement multiple inputs support.
  • Python exception handling in libsrd: add full traceback support with srd_dbg().

sigrok-cli

fx2lafw

  • Analog sampling: 1-channel, 2-channel, voltage meter
  • Trigger pin
  • Clock input
  • Clock output
  • Frequency/pulse counter
  • Signal generator
  • Fix power consumption during enumeration.
    • Non-LP FX2's consume more than 100mA during enumeration. This is outside of the USB specification
    • Official workaround is to enumerate first as full-speed, then as high-speed. This is overkill for sigrok.
    • Investigate putting the CPU to sleep (except for processing interrupts) until enumerated.

PulseView

  • Deduplicate property setting functionality between SamplingBar and DeviceOptions - make SamplingBar a properties container
  • Analog support
    • Add signal v-scale control (Volts/div).
    • Add interpolation (cosine? sinc? some kind of interpolation filter?)
  • Add support for other open/import file formats
  • Add signal overview
  • Paint speed profiling information.
  • Code documentation
  • Transition coding
  • Store more config options with QSettings