Sysclk LWLA1016
 | |
| Status | supported |
|---|---|
| Source code | sysclk-lwla |
| Channels | 16/8 |
| Samplerate | 100/200/250 MHz |
| Samplerate (state) | ? |
| Triggers | only in 100MHz mode |
| Min/max voltage | ? |
| Threshold voltage | ? |
| Memory | 512Kbit/channel, or 256Kbit/channel with RLE |
| Compression | optional RLE |
| Website | taobao.com |
The Sysclk LWLA1016 is a USB-based, 16-channel logic analyzer with up to 100MHz sampling rate, or up to 250MHz with 8 channels.
Note that sigrok supports only the 100 MHz mode with 16 channels. Supporting the 200/250 MHz 8 channel modes is not worth the effort, since the device does not support triggers in these modes. A non-streaming device without triggers is pretty much useless for any real world application.
See Sysclk LWLA1016/Info for more details (such as lsusb -v output) about the device.
Hardware
TODO.
Photos
Device, front
Device, back
Device, open
PCB, top
PCB, bottom
Cypress FX2
ISSI 1
ISSI 2
ATMLH105
STC
LDOs
Input stage
Crystal
Protocol
Reverse engineering of the vendor's custom protocol is complete. See Sysclk LWLA1016/Protocol for the findings gathered.
Resources
TODO.