Difference between revisions of "Siglent SDG1010"

From sigrok
Jump to navigation Jump to search
Line 1: Line 1:
[[File:Siglent sdg1010 device front 8116.jpg|thumb|right|Siglent SDG1010]]
{{Infobox signal generator
 
| image = [[File:Siglent sdg1010 device front 8116.jpg|180px]]
The [http://siglent.com/en/product/detail3.aspx?id=100000001526838&nodecode=119008003 Siglent SDG1010] is a 10MHz function generator with USB connectivity.
| name = Siglent SDG1010
| status = planned
| source_code_dir =
| freqsine = 10MHz
| freqsquare = 10MHz
| freqother = 5MHz (pulse), 300KHz (ramp)
| frequser = 5MHz
| waveforms = sine, square, pulse, ramp, noise, user
| waveformmem = 16000 points
| modulation = AM, FM, PM, DSB-AM, FSK, ASK, PWM
| connectivity = USBTMC
| website = [http://siglent.com/en/product/detail3.aspx?id=100000001526838&nodecode=119008003 siglent.com]
}}
The Siglent SDG1010 is a 10MHz function generator with USB connectivity.


See [[Siglent SDG1010/Info]] for more details (such as '''lsusb -vvv''' output) about the device.
See [[Siglent SDG1010/Info]] for more details (such as '''lsusb -vvv''' output) about the device.

Revision as of 12:18, 28 September 2014

Siglent SDG1010
Siglent sdg1010 device front 8116.jpg
Status planned
Frequency (sine) 10MHz
Frequency (square) 10MHz
Frequency (other) 5MHz (pulse), 300KHz (ramp)
Frequency (user) 5MHz
Waveforms sine, square, pulse, ramp, noise, user
Waveform memory 16000 points
Modulation AM, FM, PM, DSB-AM, FSK, ASK, PWM
Connectivity USBTMC
Website siglent.com

The Siglent SDG1010 is a 10MHz function generator with USB connectivity.

See Siglent SDG1010/Info for more details (such as lsusb -vvv output) about the device.

Hardware

Digital:

  • ...: XILINX SPARTAN-6 XC6SLX9 (marking: "XILINX SPARTAN-6 XC6SLX9 FTG256BIV1201 D4339091A 2C TAIWAN")
  • ...: ISP13628D (marking: "ISP13628D 78535 8W D78132F")
  • ...: Lattice MachXO LCMXO640C (marking: "Lattice MachXO LCMXO640C 3TN144C A211CC25")
  • ...: Analog Devices ADSP-BF531 (markings: "Analog Devices ADSP-BF531 SBSTZ400 2310414.1 0.6 #1208 Blackfin")
  • ...: Advanced Monolithic Systems AMS1117 (marking: "AMS1117 1125")
  • ...: Hynix H57V1262GTR (marking: "Hynix H57V1262GTR-75C 209S N8FT1265Q2")
  • ...: Spansion S29GL064N90TFIO4 (markings: "Spansion S29GL064N90TFIO4 124FF491 H (C)06 SPANSION")
  • and lots more...

Analog:

Display/frontpanel:

  • ...

Power supply:

  • ...

Photos

Device

Teardown

Digital parts

Analog parts

Display / frontpanel

Power supply

Protocol

There are two possible PC connectivity methods that can be selected in the SDG1010 menu, which have different USB VID/PID pairs:

  • "Raw USB" (this is what the vendor PC software uses): f4ed:ee37
  • "USBTMC": f4ed:ee3a

Additionally, there are apparently GPIB and Ethernet options, but those are not available in the "standard" device. It's unclear if/where devices with those options can be bought, maybe only the rebranded LeCroy devices have them (?)

TODO: Details.

See the SDG1000 programming manual for a protocol description.

Resources