Difference between revisions of "Robomotic MiniLogic"

From sigrok
Jump to navigation Jump to search
m
m
 
Line 8: Line 8:
| samplerate_state = —
| samplerate_state = —
| triggers        = none (SW-only)
| triggers        = none (SW-only)
| voltages        = ?
| voltages        = -0.5V — 5.25V
| threshold        = Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V
| memory          = none
| memory          = none
| compression      = none
| compression      = none

Latest revision as of 12:19, 28 July 2013

Robomotic MiniLogic
Robomotic minilogic.png
Status supported
Source code fx2lafw
Channels 8
Samplerate 24MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage -0.5V — 5.25V
Threshold voltage Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V
Memory none
Compression none
Website robomotic.com

The Robomotic MiniLogic is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

It is a clone of the Saleae Logic.

In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.

See Robomotic MiniLogic/Info for more details (such as lsusb -vvv output) about the device.

Hardware

Photos

See also this flickr set for more photos of the device.

Protocol

Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.

Resources

TODO.