Robomotic BugLogic 3

From sigrok
Revision as of 12:23, 28 July 2013 by Uwe Hermann (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Robomotic BugLogic 3
Robomotic buglogic3.png
Status supported
Source code fx2lafw
Channels 8
Samplerate 24MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage -0.5V — 5.25V
Threshold voltage Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V
Memory none
Compression none
Website robomotic.com

The Robomotic BugLogic 3 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

It is a clone of the Saleae Logic.

In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.

See Robomotic BugLogic 3/Info for more details (such as lsusb -vvv output) about the device.

Hardware

  • Main chip: Cypress CY7C68013A-56LFXC (FX2LP)
  • I2C EEPROM: ?
  • Octal tristate bus transceiver: LVC245 (TODO: vendor?)
  • Crystal: 24MHz

Photos

Protocol

Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.

Resources