Rigol DS1052E
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
 | |
| Status | supported |
|---|---|
| Source code | rigol-ds |
| Channels | 2 |
| Samplerate | 1GSa/s (1ch), 500MSa/s (2ch) |
| Samplerate (eq. time) | 10GSa/s |
| Analog bandwidth | 50MHz |
| Vertical resolution | 8bits |
| Triggers | edge, pulse width, slope, video, pattern, continuous time, alternate |
| Input impedance | 1MΩ‖15pF 300V RMS CAT I |
| Memory | 1Mpts (mode/ch-dependent) |
| Display | 5.7" QVGA (320x240), 64K colors |
| Connectivity | USB host/device, RS232, pass/fail out |
| Features | math: + / — / x / FFT, vertical sensitivity: 2mV/div - 10V/div |
| Website | rigolna.com |
The Rigol DS1052E is a 50MHz, 1GSa/s, 2-channel digital storage oscilloscope.
See Rigol DS1052E/Info for more details (such as lsusb -v output) about the device.
See Rigol DS1000 series for information common to all devices in this series.
Hardware
(based on this wiki page)
- CPU: Analog ADSP-BF531
- Flash EPROM: Spansion S29GL064N90TFI04 - 8MB, 16Bit
- Sample RAM: ISSI IS61LPS25636A-200 - 256kx36, 200MHz @ 250MHz
- Config FRAM: Ramtron FM24CL04B - 4kb non volatile ferroelectric memory
- SDRAM: Hynix H57V1262GTR - 4x2x16 Mb (16 MB)
- A/D converter: 5x Analog AD9288-40 - 8-Bit, 40MHz MSPS Dual A/D Converter @100MHz
- A/D driver: National LMH6552 or LMH6553
- FPGA: Altera Cyclone III EP3C5F256C8N
- CPLD: Lattice Mach XO LCMXO256C-3TN100C
- USB interface: NXP ISP1362BD
- LCD controller: UPS051 or Himax HX8802-C
Photos
Device, front
Protocol
See Rigol DS1000 series#Protocol.
Resources
- Rigol: DS1052E related documents (datasheet, user guide, ...)
- EEVblog forums: The Rigol DS1052E
- EEVblog #37 – Rigol DS1052E Oscilloscope Teardown
- DS1000E Programming Guide (link dead)
- Rigol Homebrew wiki (lots of useful info)