Difference between revisions of "Mcupro Logic16 clone"

From sigrok
Jump to navigation Jump to search
m (Uwe Hermann moved page Mcupro Saleae16 to Mcupro Logic16 clone without leaving a redirect)
m
Line 1: Line 1:
{{DISPLAYTITLE:mcupro Saleae16}}
{{DISPLAYTITLE:mcupro Logic16 clone}}
{{Infobox logic analyzer
{{Infobox logic analyzer
| image            = [[File:Mcupro_Logic16_overview.png|180px]]
| image            = [[File:Mcupro_Logic16_overview.png|180px]]
| name            = mcupro Saleae16
| name            = mcupro Logic16 clone
| status          = planned
| status          = planned
| source_code_dir  = saleae-logic16
| source_code_dir  = saleae-logic16
Line 16: Line 16:
}}
}}


The '''mcupro Saleae16''' is a USB-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels).
The '''mcupro Logic16 clone''' is a USB-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels).


This is a clone of the [[Saleae Logic16]].
This is a clone of the [[Saleae Logic16]].


See [[Mcupro Saleae16/Info]] for more details (such as '''lsusb -v''' output) about the device.
See [[mcupro Logic16 clone/Info]] for more details (such as '''lsusb -v''' output) about the device.


== Hardware ==
== Hardware ==

Revision as of 14:08, 25 August 2014

mcupro Logic16 clone
Mcupro Logic16 overview.png
Status planned
Source code saleae-logic16
Channels 3/6/9/16
Samplerate 100/50/32/16MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage -0.9V — 6V
Threshold voltage 1.5V (operates with 3.3V logic)
Memory none
Compression yes
Website aliexpress.com

The mcupro Logic16 clone is a USB-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels).

This is a clone of the Saleae Logic16.

See mcupro Logic16 clone/Info for more details (such as lsusb -v output) about the device.

Hardware

Photos

Protocol

See Saleae_Logic16#Protocol.

Firmware

This logic analyzer works with unmodified Saleae software. The Actel FPGA has on-chip flash storage, so it only requires an upload of Cypress FX2LP firmware in order to operate.

The firmware extraction steps are identical to steps for Saleae Logic16, however you only need to have saleae-logic16-fx2.fw installed.