Difference between revisions of "Mcupro Logic16 clone"

From sigrok
Jump to navigation Jump to search
m
m
Line 2: Line 2:


{{Infobox logic analyzer
{{Infobox logic analyzer
| image            = [[File:USB-Logic-Analyzer-100M-max-sample-rate-16Channels-10B-samples-MCU-ARM-FPGA-debug-tool.jpg|180px]]
| image            =  
| name            = mcupro Saleae16
| name            = mcupro Saleae16
| status          = planned
| status          = planned

Revision as of 17:37, 22 August 2014


mcupro Saleae16
Status planned
Source code saleae-logic16
Channels 3/6/9/16
Samplerate 100/50/32/16MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage -0.9V — 6V
Threshold voltage configurable:
for 1.8V to 3.6V systems: VIH=1.4V, VIL=0.7V
for 5V systems: VIH=3.6V, VIL=1.4V
Memory none
Compression yes
Website [1]

The mcupro Saleae16 is a USB-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels).

This is a clone of the Saleae Logic16.

See Mcupro Saleae16/Info for more details (such as lsusb -vvv output) about the device.

Hardware

Operation

This logic analyzer works with unmodified Saleae software. The Actel FPGA has on-chip flash storage, so it appears that it only requires an upload of Cypress FX2LP firmware in order to operate.

Photos

Mcupro Logic16 top.jpeg Mcupro Logic16 bottom.jpeg

Protocol

See Saleae_Logic16#Protocol.