MCU123 Saleae Logic clone
Revision as of 23:51, 22 January 2013 by Uwe Hermann (talk | contribs) (Created page with "{{Infobox logic analyzer | image = | name = MCU123 Saleae Logic clone | status = supported | source_code_dir = fx2lafw | channels = ...")
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | ? |
| Memory | none |
| Compression | none |
| Website | mcu123.com |
The MCU123 Saleae Logic clone is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
It is a clone of the Saleae Logic. It's also very similar to the MCU123 USBee AX Pro clone minus the different USB vendor/device IDs.
In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.
See MCU123 Saleae Logic clone/Info for more detailed information on the device.
Hardware
TODO.
Photos
TODO.
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.
Resources
- Random aliexpress.com vendor (there are many)