Difference between revisions of "LeCroy LogicStudio"

From sigrok
Jump to navigation Jump to search
m (Add photos)
(Add photos of the FPGA and FX2)
Line 27: Line 27:
File:Lecroy-logicstudio.jpg|<small>LogicStudio</small>
File:Lecroy-logicstudio.jpg|<small>LogicStudio</small>
File:Lecroy-logicstudio-pcb.jpg|<small>PCB, front</small>
File:Lecroy-logicstudio-pcb.jpg|<small>PCB, front</small>
File:Lecroy-logicstudio-fpga.jpg|<small>FPGA</small>
File:Lecroy-logicstudio-usb.jpg|<small>FX2</small>
</gallery>
</gallery>

Revision as of 17:44, 12 October 2015

LeCroy LogicStudio
Lecroy-logicstudio.jpg
Status
Channels 16
Samplerate up to 1GHz (when sampling 8 channels) ; up to 500MHz (when sampling 16 channels)
Samplerate (state)
Triggers high/low state, rising/falling/any edge, more
Min/max voltage ?
Threshold voltage ?
Memory ?
Compression none
Website teledynelecroy.com

The LeCroy LogicStudio is an USB logic analyzer with 16 channels that offers up to 1GHz samplerate. When all 16 channels are enabled, the maximum samplerate is limited to at most 500MHz. Either the lower eight or the upper eight channels may be disabled for an increased samplerate of up to 1GHz. The device offers a continuous acquisition mode where all inputs are sampled at a frequency of 1kHz.

Hardware

  • FPGA: Xilinx Spartan-6 XC6SLX16
  • USB interface: Cypress CY7C68013A
  • Crystal (FX2): 24.000MHz
  • Crystal (FPGA): Unknown, xpress0?

Photos