Difference between revisions of "Fx2lafw"

From sigrok
Jump to navigation Jump to search
m
(→‎Hardware overview: Add more devices, mark tested AX-Pro and clones as supported wrt analog channels as well.)
(22 intermediate revisions by 4 users not shown)
Line 1: Line 1:
{{DISPLAYTITLE:fx2lafw}}
'''fx2lafw''' is an open-source firmware for Cypress FX2 chips which makes them usable as simple logic analyzer hardware.
'''fx2lafw''' is an open-source firmware for Cypress FX2 chips which makes them usable as simple logic analyzer hardware.


It is licensed under the terms of the GNU GPL (version 2, or later) and written in C, using [http://sdcc.sourceforge.net/ sdcc] as compiler, and [https://github.com/mulicheng/fx2lib fx2lib] as helper library.
It is licensed under the terms of the '''GNU GPL (version 2, or later)''' and written in C, using [http://sdcc.sourceforge.net/ sdcc] as compiler, and [https://github.com/mulicheng/fx2lib fx2lib] as helper library.


== Hardware overview ==
== Hardware overview ==
Line 18: Line 19:
!Probes (pins)
!Probes (pins)
!FX2 package
!FX2 package
!Buffer/ESD-protection
!Buffer / ESD-protection
!Resistor/probe
!Resistors
!I2C EEPROM
!I2C EEPROM
!Status
!Status
Line 153: Line 154:
| ?
| ?
| ?
| ?
| bgcolor="lime" | 95%<sup>1</sup>
| bgcolor="lime" | 100%


|-
|-
Line 197: Line 198:
| ?
| ?
| ?
| ?
| bgcolor="red" | TODO
| bgcolor="lime" | 100%


|-
|-
Line 220: Line 221:
| Atmel ATMLH113
| Atmel ATMLH113
| bgcolor="lime" | 95%<sup>1</sup>
| bgcolor="lime" | 95%<sup>1</sup>
|-
| [[HT USBee-AxPro]]
| 08a9:0014
| Clone (AX)
| 8 (+1 analog)
| 56PVXC (SSOP)
| none
| none
| Microchip 24LC641 + 24LC02B
| bgcolor="lime" | 100%


|-
|-
Line 245: Line 257:
|-
|-
| [[Lcsoft Mini Board]]
| [[Lcsoft Mini Board]]
| 04b4:8613
| 04b4:8613 / 0925:3881
| bgcolor="lime" | Eval board
| Eval board / Clone (Logic)
| 8/16
| 8/16
| 56PVXC (SSOP)
| 56PVXC (SSOP)
Line 255: Line 267:


|-
|-
| [http://translate.google.com/translate?sl=ru&tl=en&js=n&prev=_t&hl=de&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Fwww.rom.by%2Fforum%2FLogicheskij_analizator_signalov_USBee_AX_Saleae_Logic_45&act=url Mollex Logic Analyzer]<sup>3</sup>
| [[MCU123 Saleae Logic clone]]
| 0925:3881
| Clone (Logic)
| 8
| 56PVC (SSOP)
| NXP 74HC245
| 100 Ω
| Atmel AT24C02
| bgcolor="lime" | 100%
 
|-
| [[MCU123 USBee AX Pro clone]]<sup>2</sup>
| 08a9:0014
| Clone (AX-Pro w/o scope)
| 8
| 56PVXC (SSOP)
| NXP 74HC245
| 100 Ω
| Atmel AT24C02
| bgcolor="lime" | 100%
 
|-
| [http://www.ebay.co.uk/itm/MDSO-LA-20MHz-USB-Digital-oscilloscope-48M-Sampling-16-channel-logic-analyzer-/251119761248?pt=UK_BOI_Electrical_Test_Measurement_Equipment_ET&hash=item3a77e77760&_uhb=1 MDSO-LA]
| ?
| ?
| Clone (Logic, AX w/o scope)
| Clone (SX, AX-Pro)
| ?
| ?
| ?
| ?
Line 266: Line 300:


|-
|-
| [http://translate.google.com/translate?hl=de&sl=zh-CN&tl=en&u=http%3A%2F%2Fitem.taobao.com%2Fitem.htm%3Fid%3D6076642324 Noname Saleae Logic clone I]
| [http://translate.google.com/translate?sl=ru&tl=en&js=n&prev=_t&hl=de&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Fwww.rom.by%2Fforum%2FLogicheskij_analizator_signalov_USBee_AX_Saleae_Logic_45&act=url Mollex Logic Analyzer]<sup>3</sup>
| ?
| ?
| Clone (Logic)
| Clone (Logic, AX w/o scope)
| ?
| ?
| ?
| ?
Line 277: Line 311:


|-
|-
| [http://www.hotmcu.com/24mhz-8channel-logic-analyzerminisimpleeasy-to-use-p-15.html?cPath=3_26 Noname Saleae Logic clone II]
| [http://translate.google.com/translate?hl=de&sl=zh-CN&tl=en&u=http%3A%2F%2Fitem.taobao.com%2Fitem.htm%3Fid%3D6076642324 Noname Saleae Logic clone I]
| ?
| ?
| Clone (Logic)
| Clone (Logic)
Line 288: Line 322:


|-
|-
| [https://translate.googleusercontent.com/translate_c?act=url&hl=de&ie=UTF8&prev=_t&rurl=translate.google.com&sl=zh-CN&tl=en&u=http://item.taobao.com/item.htm%3Fid%3D15872520745&usg=ALkJrhg07D21JRo3GQV7fR9Mua_yYKocfw Noname Saleae Logic clone III]
| [http://translate.google.com/translate?sl=cs&tl=en&js=n&prev=_t&ie=UTF-8&eotf=1&u=http%3A%2F%2Fpandatron.cz%2F%3F2729%26klon_logickeho_analyzatoru_saleae&act=url Pandatron PLA8] ([https://translate.googleusercontent.com/translate_c?act=url&depth=1&hl=de&ie=UTF8&prev=_t&rurl=translate.google.com&sl=cs&tl=en&u=http://pandatron.cz/%3Fshop%26sla%3D2%26pn%3D90113%26tx%3Dpla8_modul_-_logicky_analyzator_pro_usb&usg=ALkJrhjOD7bJQd1xRz_BFS3hxg31kE7FSQ S], [http://www.ebay.de/itm/USB-Logic-Analyzer-and-decoder-8-CH-10-GS-CY7C68013A-USB-2-0-/221154315071 E])
| ?
| ?
| Clone (Logic)
| Clone (Logic)
| ?
| 8
| ?
| 56PVXC (SSOP)
| ?
| SN74LVC245APWR
| ?
| 100 Ω
| ?
| ?
| bgcolor="lime" | 100%
| bgcolor="lime" | 100%
Line 377: Line 411:
|-
|-
| [http://lab.robomotic.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=26&category_id=6&vmcchk=1&option=com_virtuemart&Itemid=56 Robomotic XZL024]<sup>7</sup>
| [http://lab.robomotic.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=26&category_id=6&vmcchk=1&option=com_virtuemart&Itemid=56 Robomotic XZL024]<sup>7</sup>
| 08a9:0014
| Clone (AX-Pro)
| 8 (+2 analog)
| 56LTXC (QFN)
| ?
| ?
| Clone (AX)
| 100 Ω
| ?
| Atmel 24C02N
| ?
| ?
| ?
| ?
| bgcolor="lime" | 95%<sup>1</sup>
| bgcolor="lime" | 95%<sup>1</sup>


Line 395: Line 429:
| ?
| ?
| ?
| ?
| bgcolor="lime" | 100%
|-
| [[Sysclk AX-Pro]]
| 08a9:0014
| Clone (AX)
| 8 (+2 analog)
| 56LTXC (QFN)
| none
| ?
| Atmel AT24C02N
| bgcolor="lime" | 100%
| bgcolor="lime" | 100%


Line 409: Line 454:


|-
|-
| [http://translate.google.com/translate?sl=zh-CN&tl=en&js=n&prev=_t&hl=de&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Fitem.taobao.com%2Fitem.htm%3Fid%3D6321822194&act=url XZL-Studio AX]
| [[XZL_Studio AX]]
| ?
| 08a9:0014
| Clone (AX)
| Clone (AX-Pro)
| ?
| 8 (+2 analog)
| ?
| 56LTXC (QFN)
| ?
| ?
| ?
| ?
| 100 Ω
| Atmel 24C02N
| bgcolor="lime" | 95%<sup>1</sup>
| bgcolor="lime" | 95%<sup>1</sup>


|-
|-
| [http://www.aliexpress.com/product-fm/540565153-New-arrival-XZL-Studio-DX-usb-logic-analyzer-oscilloscope-Mixed-Signal-Oscilloscope-2-probe-P6020-4-wholesalers.html XZL-Studio DX]<sup>6</sup>
| [[XZL Studio DX]]<sup>6</sup>
| ?
| 2x 08a9:0015
| Clone (DX)
| Clone (DX)
| 8/16
| 56PVXC (SSOP)
| ?
| ?
| ?
| ?
| ?
| Atmel ATML H136 24C02C M Y
| ?
| ?
| bgcolor="red" | TODO
| bgcolor="red" | TODO


Line 436: Line 481:
<small>
<small>
<sup>1</sup> Analog signal support is not yet implemented.<br />
<sup>1</sup> Analog signal support is not yet implemented.<br />
<sup>2</sup> Even though this devices has the same USB VID/PID as the CWAV USBee AX-Pro, it only has 8 channels and no analog support.<br />
<sup>2</sup> Even though this device has the same USB VID/PID as the CWAV USBee AX-Pro, it only has 8 channels and no analog support.<br />
<sup>3</sup> Clone of the USBee AX and Saleae Logic. "Mollex" is the name of the guy who seems to sell it on some forum.<br />
<sup>3</sup> Clone of the USBee AX and Saleae Logic. "Mollex" is the name of the guy who seems to sell it on some forum.<br />
<sup>4</sup> Clone of the USBee AX (SX?) and Saleae Logic, see also [http://iteadstudio.com/copied/hack-a-saleae-logic-analyzer/ here] and [http://iteadstudio.com/produce/seleae-logic-usbee-ax-usb-blaster/ here]. Dissection by a user [http://www.todopic.com.ar/foros/index.php?topic=32657.0 here]. Seems to be the same hardware as the [[Robomotic MiniLogic]].<br />
<sup>4</sup> Clone of the USBee AX (SX?) and Saleae Logic, see also [http://iteadstudio.com/copied/hack-a-saleae-logic-analyzer/ here] and [http://iteadstudio.com/produce/seleae-logic-usbee-ax-usb-blaster/ here]. Dissection by a user [http://www.todopic.com.ar/foros/index.php?topic=32657.0 here]. Seems to be the same hardware as the [[Robomotic MiniLogic]].<br />
Line 446: Line 491:
== Download ==
== Download ==


  $ '''git clone git://sigrok.git.sourceforge.net/gitroot/sigrok/fx2lafw'''
Released versions of the source code can be downloaded here:
 
  http://sigrok.org/download/source/sigrok-firmware-fx2lafw/
 
There are also '''pre-built firmware files''' that can be used without having to build them from source:
 
  http://sigrok.org/download/binary/sigrok-firmware-fx2lafw/
 
Or you can get the latest development snapshot of the source code from git:
 
  $ '''git clone git://sigrok.org/sigrok-firmware-fx2lafw'''
 
You can also [http://sigrok.org/gitweb/?p=sigrok-firmware-fx2lafw.git;a=tree browse the source code] via gitweb.


== Usage ==
== Usage ==
Line 452: Line 509:
=== Build sigrok ===
=== Build sigrok ===


* Build and install a sigrok frontend (CLI or GUI) with libsigrok >= 0.1.1 (or latest git HEAD) for your platform as usual, see e.g. [[Linux]], [[Mac OS X]], [[FreeBSD]], or [[Windows]].
* Build and install a [[libsigrok]] frontend (CLI or GUI) with libsigrok >= 0.1.1 (or latest git HEAD) for your platform as usual, see [[Building]].


=== Install the udev rules file ===
=== Install the udev rules file ===


These steps prevent the need to run sigrok as superuser.
These steps prevent the need to run libsigrok frontends as superuser.


* Copy the udev rules file from '''sigrok/libsigrok/contrib/z60_libsigrok.rules''' to '''/etc/udev/rules.d/'''.
* Copy the udev rules file from '''libsigrok/contrib/z60_libsigrok.rules''' to '''/etc/udev/rules.d/''' (or where-ever your distribution stores udev rules files).
* Restart udev: '''sudo /etc/init.d/udev restart'''.
* Restart udev: '''sudo /etc/init.d/udev restart'''.


=== Build fx2lafw ===
=== Build fx2lafw ===


  $ '''cd fx2lafw'''
  $ '''cd sigrok-firmware-fx2lafw'''
  $ '''git clone git://github.com/mulicheng/fx2lib.git'''
  $ '''./autogen.sh'''
$ '''./configure'''
  $ '''make'''
  $ '''make'''
  $ '''sudo cp hw/*/build/*.fw /usr/local/share/sigrok-firmware/'''
  $ '''sudo make install'''
 
This will install the firmware files into '''/usr/local/share/sigrok-firmware/''', per default.
 
=== Pre-built firmware files ===
 
There are also pre-built firmware files that can be used without having to build them from source (see [[#Download|above]]).
 
== Cypress FX2 vs. FX2LP ==
 
Various devices supported by fx2lafw can use either the older Cypress CY7C68013 (FX2) or the more recent Cypress CY7C68013A (FX2LP).


Where '''/usr/local''' is your installation prefix.
There are [http://www.cypress.com/?id=4&rID=31723 various differences] between the two ICs, see [http://www.cypress.com/?rID=12968 AN4078 - Migrating From EZ-USB FX2 to EZ-USB FX2LP] ([http://www.cypress.com/?docID=39449 PDF]) for the details.


== TODO ==
There are known cases of e.g. the [[CWAV USBee SX]] having shipped with an FX2 at some point, and more recent units shipping with an FX2LP. Also, it's not too uncommon that some FX2 "eval board" or clone of an existing logic analyser (e.g. [[CWAV USBee SX]] or [[Saleae Logic]] ones) has "CY7C68013A (FX2LP)" chip markings, but in reality it really is an older "CY7C68013 (FX2)".


* Analog sampling: 1-channel, 2-channel, voltage meter
The fx2lafw firmware supports both devices (FX2 and FX2LP).
* Trigger pin
* Clock input
* Clock output
* Frequency/pulse counter
* Signal generator


== Resources ==
== Resources ==


* [http://sigrok.git.sourceforge.net/git/gitweb.cgi?p=sigrok/fx2lafw;a=tree Browse Source Code]
* [http://sdcc.sourceforge.net/ sdcc] (C compiler for 8051 microcontrollers, usable for FX2)
* [http://sdcc.sourceforge.net/ sdcc] (C compiler for 8051 microcontrollers, usable for FX2)
* fx2lib: [http://sourceforge.net/projects/fx2lib/ SF project page], [http://allmybrain.com/2008/12/05/an-open-source-library-for-writing-firmware-on-the-cypress-fx2-with-sdcc/ blog article], [https://github.com/mulicheng/fx2lib github repo], [http://sourceforge.net/mailarchive/forum.php?forum_name=fx2lib-devel mailing list]
* fx2lib: [http://sourceforge.net/projects/fx2lib/ SF project page], [http://allmybrain.com/2008/12/05/an-open-source-library-for-writing-firmware-on-the-cypress-fx2-with-sdcc/ blog article], [https://github.com/mulicheng/fx2lib github repo], [http://sourceforge.net/mailarchive/forum.php?forum_name=fx2lib-devel mailing list]
* [http://www.cypress.com/?id=193 Cypress FX2] docs:
* [http://www.cypress.com/?id=193 Cypress FX2] docs:
** [http://www.cypress.com/?rID=38801 CY7C68013A, CY7C68014A, CY7C68015A, CY7C68016A datasheet] ([http://www.cypress.com/?docID=30172 PDF])
** [http://www.cypress.com/?rID=38801 CY7C68013A, CY7C68014A, CY7C68015A, CY7C68016A datasheet] ([http://www.cypress.com/?docID=34060 PDF])
** [http://www.cypress.com/?rID=38232 EZ-USB Technical Reference Manual (TRM)] ([http://www.cypress.com/?docID=27095&dlm=1 PDF])
** [http://www.cypress.com/?rID=38232 EZ-USB Technical Reference Manual (TRM)] ([http://www.cypress.com/?docID=27095&dlm=1 PDF])
** [http://www.cypress.com/?id=193&rtID=76 EZ-USB FX2LP appnotes]
** [http://www.cypress.com/?id=193&rtID=76 EZ-USB FX2LP appnotes]
Line 491: Line 553:
** [http://www.cypress.com/?rID=14448 GPIF Designer] (Windows software, requires login)
** [http://www.cypress.com/?rID=14448 GPIF Designer] (Windows software, requires login)
*** [http://www.cypress.com/?rID=14319 CY3681 EZ-USB FX2 Development Kit] (GPIF designer downloadable without login)
*** [http://www.cypress.com/?rID=14319 CY3681 EZ-USB FX2 Development Kit] (GPIF designer downloadable without login)
** [http://www.cypress.com/?rID=12968 AN4078 - Migrating From EZ-USB FX2 to EZ-USB FX2LP] ([http://www.cypress.com/?docID=39449 PDF])

Revision as of 00:49, 14 July 2016

fx2lafw is an open-source firmware for Cypress FX2 chips which makes them usable as simple logic analyzer hardware.

It is licensed under the terms of the GNU GPL (version 2, or later) and written in C, using sdcc as compiler, and fx2lib as helper library.

Hardware overview

The fx2lafw firmware is meant to work on any FX2-based hardware, including logic analyzers, FX2 eval boards, or other hardware which has this chip on-board.

Here's a quick overview of some of the relevant hardware information we have about the various devices.

The devices marked as Clone are those that clone the USB VID/PID of the original product, and also have no own PC software/firmware, but instead illegally ship the software of the original product/manufacturer.

Device USB VID:PID Product type Probes (pins) FX2 package Buffer / ESD-protection Resistors I2C EEPROM Status
6-Lab LOGIC-U5 ? Clone (Logic) ? ? ? ? ? 100%
6-Lab LOGIC-U PLUS5 ? Clone (AX-Pro) ? ? ? ? ? 95%1
6-Lab LOGIC-U PRO5 ? Clone (AX-Pro) ? ? ? ? ? 95%1
6-Lab LOGIC-U ISL5 ? Clone (Logic) ? ? ? ? ? 100%
ARMFLY AX-Pro 08a9:0014 Clone (AX-Pro) 8 (+1 analog) 56LTXC (QFN) ? 100 Ω Atmel ATML920 24C02N SU27 D 95%1
ARMFLY Mini-Logic2 08a9:0014 Clone (AX-Pro w/o scope) 8 56LTXC (QFN) ? 100 Ω Atmel ATML920 24C02N SU27 D 100%
Braintechnology USB Interface V2.x 04b4:8613 Eval board 8/16 56PVXC (SSOP) none none Microchip 24LC64I 100%
Braintechnology USB-LPS 16d0:0498 Original product 8/16 56PVXC (SSOP) none ? 68 Ω Atmel ATML0816 TINY13 20SU 100%
CWAV BusBee ? Original product 4 ? ? ? ? TODO
CWAV USBee AX-Standard 08a9:0012 Original product ? ? ? ? ? TODO
CWAV USBee AX-Plus 08a9:0013 Original product ? ? ? ? ? TODO
CWAV USBee AX-Pro 08a9:0014 Original product 8 (+1 analog) ? ? ? ? 100%
CWAV USBee DX 08a9:0015 Original product 16 (+2 analog) ? ? ? ? TODO
CWAV USBee EX2 ? Original product 8 ? ? ? ? TODO
CWAV USBee SX 08a9:0009 Original product 8 56PVXC (SSOP) none 560 Ω Microchip 24LC01B 100%
CWAV USBee ZX 08a9:0005 Original product 8 56PVXC (SSOP) none ? ? 100%
EE Electronics ESLA100 0925:3881 Clone (Logic) 8 56LFXC (QFN) NXP 74HC245D 100 Ω Atmel ATMLH911 02B 1 100%
EE Electronics ESLA201A 08a9:0014 Clone (AX) 8 (+1 analog) 56LFXC (QFN) none 100 Ω Atmel ATMLH113 95%1
HT USBee-AxPro 08a9:0014 Clone (AX) 8 (+1 analog) 56PVXC (SSOP) none none Microchip 24LC641 + 24LC02B 100%
ITead Studio MiniLogic4 ? Clone (Logic, AX w/o scope) ? ? ? ? ? 100%
ITead Studio ITDB01 ? Eval board ? ? ? ? ? 100%
Lcsoft Mini Board 04b4:8613 / 0925:3881 Eval board / Clone (Logic) 8/16 56PVXC (SSOP) none none Shenzhen First-Rank Technology T24C128A 100%
MCU123 Saleae Logic clone 0925:3881 Clone (Logic) 8 56PVC (SSOP) NXP 74HC245 100 Ω Atmel AT24C02 100%
MCU123 USBee AX Pro clone2 08a9:0014 Clone (AX-Pro w/o scope) 8 56PVXC (SSOP) NXP 74HC245 100 Ω Atmel AT24C02 100%
MDSO-LA ? Clone (SX, AX-Pro) ? ? ? ? ? 100%
Mollex Logic Analyzer3 ? Clone (Logic, AX w/o scope) ? ? ? ? ? 100%
Noname Saleae Logic clone I ? Clone (Logic) ? ? ? ? ? 100%
Pandatron PLA8 (S, E) ? Clone (Logic) 8 56PVXC (SSOP) SN74LVC245APWR 100 Ω ? 100%
picavr Digital USB Analyzer v1 ? Clone (Logic, AX w/o scope) ? ? ? ? ? 100%
picavr A/D USB Analyzer v2 ? Clone (Logic, AX) ? ? ? ? ? 95%1
picavr A/D USB Analyzer v3 ? Clone (Logic, AX) ? ? ? ? ? 95%1
picavr A/D USB Analyzer v4 ? Clone (Logic, AX) ? ? ? ? ? 95%1
Robomotic BugLogic 2 ? Clone (Logic, SX/ZX) ? ? ? ? ? 100%
Robomotic BugLogic 3 0925:3881 Clone (Logic) 8 ? ? ? ? 100%
Robomotic MiniLogic 0925:3881 Clone (Logic, AX w/o scope) 8 56PVXC (SSOP) 74HC244A ? 2x Microchip 24LC02BI, 1x 24LC64I 100%
Robomotic XZL0247 08a9:0014 Clone (AX-Pro) 8 (+2 analog) 56LTXC (QFN) ? 100 Ω Atmel 24C02N 95%1
Saleae Logic 0925:3881 Original product 8 56PVXC (SSOP) ST DVIULC6-4SC6 ? ? 100%
Sysclk AX-Pro 08a9:0014 Clone (AX) 8 (+2 analog) 56LTXC (QFN) none ? Atmel AT24C02N 100%
Sysclk Box ? Clone (SX, AX-Pro w/o scope) ? ? ? ? ? 100%
XZL_Studio AX 08a9:0014 Clone (AX-Pro) 8 (+2 analog) 56LTXC (QFN) ? 100 Ω Atmel 24C02N 95%1
XZL Studio DX6 2x 08a9:0015 Clone (DX) 8/16 56PVXC (SSOP) ? ? Atmel ATML H136 24C02C M Y TODO

All devices use a 24MHz crystal. For 8 probes the FX2 pins PB0-PB7 are used, for 16 probes PB0-PB7 and PD0-PD7. For analog support PD0-PD7 (plus additional hardware) is usually used.

1 Analog signal support is not yet implemented.
2 Even though this device has the same USB VID/PID as the CWAV USBee AX-Pro, it only has 8 channels and no analog support.
3 Clone of the USBee AX and Saleae Logic. "Mollex" is the name of the guy who seems to sell it on some forum.
4 Clone of the USBee AX (SX?) and Saleae Logic, see also here and here. Dissection by a user here. Seems to be the same hardware as the Robomotic MiniLogic.
5 It seems 6-Labs has/had permission from Saleae to distribute the hardware in Ukraine (only)? Various adapters are available, for example RS422/RS232/CAN, galvanic isolation, "BNC divider".
6 There is apparently a post from the author of XZL-Studio DX in some forum.
7 There's an RS232/RS485/RS422/CAN converter board for this.

Download

Released versions of the source code can be downloaded here:

 http://sigrok.org/download/source/sigrok-firmware-fx2lafw/

There are also pre-built firmware files that can be used without having to build them from source:

 http://sigrok.org/download/binary/sigrok-firmware-fx2lafw/

Or you can get the latest development snapshot of the source code from git:

$ git clone git://sigrok.org/sigrok-firmware-fx2lafw

You can also browse the source code via gitweb.

Usage

Build sigrok

  • Build and install a libsigrok frontend (CLI or GUI) with libsigrok >= 0.1.1 (or latest git HEAD) for your platform as usual, see Building.

Install the udev rules file

These steps prevent the need to run libsigrok frontends as superuser.

  • Copy the udev rules file from libsigrok/contrib/z60_libsigrok.rules to /etc/udev/rules.d/ (or where-ever your distribution stores udev rules files).
  • Restart udev: sudo /etc/init.d/udev restart.

Build fx2lafw

$ cd sigrok-firmware-fx2lafw
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install

This will install the firmware files into /usr/local/share/sigrok-firmware/, per default.

Pre-built firmware files

There are also pre-built firmware files that can be used without having to build them from source (see above).

Cypress FX2 vs. FX2LP

Various devices supported by fx2lafw can use either the older Cypress CY7C68013 (FX2) or the more recent Cypress CY7C68013A (FX2LP).

There are various differences between the two ICs, see AN4078 - Migrating From EZ-USB FX2 to EZ-USB FX2LP (PDF) for the details.

There are known cases of e.g. the CWAV USBee SX having shipped with an FX2 at some point, and more recent units shipping with an FX2LP. Also, it's not too uncommon that some FX2 "eval board" or clone of an existing logic analyser (e.g. CWAV USBee SX or Saleae Logic ones) has "CY7C68013A (FX2LP)" chip markings, but in reality it really is an older "CY7C68013 (FX2)".

The fx2lafw firmware supports both devices (FX2 and FX2LP).

Resources