Difference between revisions of "FreeBSD"

From sigrok
Jump to navigation Jump to search
(Build instructions for all projects.)
m
 
(20 intermediate revisions by 4 users not shown)
Line 1: Line 1:
This page describes how to build/install sigrok on FreeBSD.
This page describes how to build/install the sigrok subprojects on [http://www.freebsd.org FreeBSD].


The instructions were tested on FreeBSD 9.0, older versions may or may not have the required libs/versions to build sigrok.
The instructions were tested on FreeBSD 10.3, older versions may or may not have the required libs/versions to build sigrok.


== Distribution packages ==
== Distribution packages ==


There are no FreeBSD packages/ports yet, contributors welcome!
FreeBSD packages/ports are available, see the [[Downloads#Binaries_and_distribution_packages|Downloads]] page.


== Getting the source ==
== Building ==


$ '''git clone git://sigrok.git.sourceforge.net/gitroot/sigrok/sigrok'''
=== libsigrok ===
$ '''cd sigrok'''


== Building libsigrok ==
'''Installing the [[Building#Build_requirements|requirements]]:'''


=== Requirements ===
$ '''pkg install git autoconf autoconf-archive automake libtool pkgconf glib libzip libftdi1 libcheck doxygen swig30 ruby python py27-numpy py27-setuptools py27-gobject3 openjdk-7.101.00_1,1'''


* git
'''Building:'''
* gcc (>= 4.0)
* gmake
* autoconf >= 2.63
* automake >= 1.11
* libtool
* pkg-config >= 0.22
* [http://library.gnome.org/devel/glib/unstable/ libglib] >= 2.22.0
* libusb-1.0 (this is an integral part of FreeBSD, not an extra package/library, though)
* [http://nih.at/libzip/ libzip] >= 0.8
* zlib >= 1.2.3.1
* [http://www.intra2net.com/en/developer/libftdi/ libftdi >= 0.16] (for some logic analyzer hardware)
 
=== Installing the requirements ===
 
$ '''pkg_add -r git gcc gmake autoconf268 automake111 libtool pkg-config glib20 libzip libftdi'''
 
=== Building ===


$ '''git clone git://sigrok.org/libsigrok'''
  $ '''cd libsigrok'''
  $ '''cd libsigrok'''
  $ '''./autogen.sh'''
  $ '''./autogen.sh'''
  $ '''./configure'''
  $ '''./configure --with-jni-include-path=/usr/local/openjdk7/include'''
  $ '''make'''
  $ '''make'''
  $ '''make install'''
  $ '''sudo make install'''


== Building libsigrokdecode ==
=== libsigrokdecode ===


=== Requirements ===
'''Installing the [[Building#Build_requirements|requirements]]:'''


* git
$ '''pkg install python3'''
* gcc (>= 4.0)
* gmake
* autoconf >= 2.63
* automake >= 1.11
* libtool
* pkg-config >= 0.22
* [http://library.gnome.org/devel/glib/unstable/ libglib] >= 2.22.0
* Python >= 3.0


=== Installing the requirements ===
'''Building:'''
 
$ '''pkg_add -r git gcc gmake autoconf268 automake111 libtool pkg-config glib20 python31'''
 
=== Building ===


$ '''git clone git://sigrok.org/libsigrokdecode'''
  $ '''cd libsigrokdecode'''
  $ '''cd libsigrokdecode'''
  $ '''./autogen.sh'''
  $ '''./autogen.sh'''
  $ '''./configure'''
  $ '''./configure'''
  $ '''make'''
  $ '''make'''
  $ '''make install'''
  $ '''sudo make install'''
 
== Building sigrok-cli ==
 
=== Requirements ===


* git
=== sigrok-firmware-fx2lafw ===
* gcc (>= 4.0)
* gmake
* autoconf >= 2.63
* automake >= 1.11
* libtool
* pkg-config >= 0.22
* [http://library.gnome.org/devel/glib/unstable/ libglib] >= 2.22.0
* libsigrok >= 0.2
* libsigrokdecode >= 0.2


=== Installing the requirements ===
'''Installing the [[Building#Build_requirements|requirements]]:'''


  $ '''pkg_add -r git gcc gmake autoconf268 automake111 libtool pkg-config glib20'''
  $ '''pkg install sdcc'''


=== Building ===
'''Building:'''


  $ '''cd sigrok-cli'''
$ '''git clone git://sigrok.org/sigrok-firmware-fx2lafw'''
  $ '''cd sigrok-firmware-fx2lafw'''
  $ '''./autogen.sh'''
  $ '''./autogen.sh'''
  $ '''./configure'''
  $ '''./configure'''
  $ '''make'''
  $ '''make'''
  $ '''make install'''
  $ '''sudo make install'''


== Building sigrok-gtk ==
=== sigrok-cli ===


=== Requirements ===
'''Building:'''


* git
$ '''git clone git://sigrok.org/sigrok-cli'''
* gcc (>= 4.0)
  $ '''cd sigrok-cli'''
* gmake
* autoconf >= 2.63
* automake >= 1.11
* libtool
* pkg-config >= 0.22
* [http://library.gnome.org/devel/glib/unstable/ libglib] >= 2.22.0
* GTK+
* libsigrok >= 0.2
 
=== Installing the requirements ===
 
$ '''pkg_add -r git gcc gmake autoconf268 automake111 libtool pkg-config glib20 gtk'''
 
=== Building ===
 
  $ '''cd sigrok-gtk'''
  $ '''./autogen.sh'''
  $ '''./autogen.sh'''
  $ '''./configure'''
  $ '''./configure'''
  $ '''make'''
  $ '''make'''
  $ '''make install'''
  $ '''sudo make install'''


== Building sigrok-qt ==
=== PulseView ===


=== Requirements ===
'''Installing the [[Building#Build_requirements|requirements]]:'''


* git
$ '''pkg install cmake qt4 qt4-qmake qt4-moc qt4-rcc qt4-uic boost-libs'''
* g++
* gmake
* libtool
* pkg-config >= 0.22
* [http://library.gnome.org/devel/glib/unstable/ libglib] >= 2.22.0
* Qt >= 4.5
* libsigrok >= 0.2
* libsigrokdecode >= 0.2


=== Installing the requirements ===
'''Building:'''


  $ '''pkg_add -r git gcc gmake libtool pkg-config glib20 qt4 qt4-qmake qt4-moc qt4-rcc qt4-uic'''
  $ '''git clone git://sigrok.org/pulseview'''
 
$ '''cd pulseview'''
=== Building ===
$ '''cmake .'''
$ '''make'''
$ '''sudo make install'''


For building [[GUI|sigrok-qt]] ('''Note:''' The Qt GUI is not yet usable!):
'''Hint''': If something goes wrong, you can see what cmake is doing by running:


  $ '''cd sigrok-qt'''
  $ '''cmake VERBOSE=1'''
$ '''qmake-qt4'''
$ '''make'''
$ '''make install'''

Latest revision as of 22:52, 16 August 2016

This page describes how to build/install the sigrok subprojects on FreeBSD.

The instructions were tested on FreeBSD 10.3, older versions may or may not have the required libs/versions to build sigrok.

Distribution packages

FreeBSD packages/ports are available, see the Downloads page.

Building

libsigrok

Installing the requirements: 

$ pkg install git autoconf autoconf-archive automake libtool pkgconf glib libzip libftdi1 libcheck doxygen swig30 ruby python py27-numpy py27-setuptools py27-gobject3 openjdk-7.101.00_1,1

Building: 

$ git clone git://sigrok.org/libsigrok
$ cd libsigrok
$ ./autogen.sh
$ ./configure --with-jni-include-path=/usr/local/openjdk7/include
$ make
$ sudo make install

libsigrokdecode

Installing the requirements: 

$ pkg install python3

Building: 

$ git clone git://sigrok.org/libsigrokdecode
$ cd libsigrokdecode
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install

sigrok-firmware-fx2lafw

Installing the requirements: 

$ pkg install sdcc

Building: 

$ git clone git://sigrok.org/sigrok-firmware-fx2lafw
$ cd sigrok-firmware-fx2lafw
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install

sigrok-cli

Building: 

$ git clone git://sigrok.org/sigrok-cli
$ cd sigrok-cli
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install

PulseView

Installing the requirements: 

$ pkg install cmake qt4 qt4-qmake qt4-moc qt4-rcc qt4-uic boost-libs

Building: 

$ git clone git://sigrok.org/pulseview
$ cd pulseview
$ cmake .
$ make
$ sudo make install

Hint: If something goes wrong, you can see what cmake is doing by running: 

$ cmake VERBOSE=1
Retrieved from "https://sigrok.org/w/index.php?title=FreeBSD&oldid=11881"