Difference between revisions of "DreamSourceLab DSLogic Pro"

From sigrok
Jump to navigation Jump to search
(Undo revision 11645 by Susurrus (talk))
Line 2: Line 2:
| image            = [[File:DSLogic.png|180px]]
| image            = [[File:DSLogic.png|180px]]
| name            = DreamSourceLab DSLogic Pro
| name            = DreamSourceLab DSLogic Pro
| status          = in progress
| status          = supported
| source_code_dir  = fx2lafw
| source_code_dir  = fx2lafw
| channels        = 1-16
| channels        = 1-16
Line 49: Line 49:
[[Category:Device]]
[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Logic analyzer]]
[[Category:In progress]]
[[Category:Supported]]

Revision as of 15:38, 3 July 2016

DreamSourceLab DSLogic Pro
DSLogic.png
Status supported
Source code fx2lafw
Channels 1-16
Samplerate 400MHz(4ch), 200MHz(8ch), 100MHz(16ch)
Samplerate (state) 50MHz
Triggers high, low, rising, falling, edge, multi-stage triggers
Min/max voltage -0.6V — 6V
Threshold voltage configurable: 0-5V (0.1V increments)
Memory 32MByte (2MByte/ch)
Compression yes
Website dreamsourcelab.com

The DreamSourceLab DSLogic Pro is a 16-channel USB-based logic analyzer, with sampling rates up to 400MHz (when using only 4 channels). This differs slightly from the original DSLogic product in its configurable threshold voltage and different PCB layout. DreamSourceLabs doesn't make the distinction between these two products very clear on their website.

See DreamSourceLab DSLogic Pro/Info for more details (such as lsusb -v output) about the device.

Hardware

Photos

Resources