Difference between revisions of "DreamSourceLab DSLogic"

From sigrok
Jump to navigation Jump to search
m
(Firmware info.)
(2 intermediate revisions by the same user not shown)
Line 2: Line 2:
| image            = [[File:DSLogic.png|180px]]
| image            = [[File:DSLogic.png|180px]]
| name            = DreamSourceLab DSLogic
| name            = DreamSourceLab DSLogic
| status          = in progress
| status          = supported
| source_code_dir  = fx2lafw
| source_code_dir  = fx2lafw
| channels        = 1-16
| channels        = 1-16
Line 38: Line 38:
File:DSLogic PCB back.jpg|<small>PCB, bottom</small>
File:DSLogic PCB back.jpg|<small>PCB, bottom</small>
</gallery>
</gallery>
== Firmware ==
In order to use this device with [[libsigrok]] the [https://github.com/DreamSourceLab/DSView/tree/4cc02c8d780e17527cd05e0ba7aa45288e49bd8a/DSView/res vendor firmare and bitstream files] are required.
The easiest method to install those is to use the [http://sigrok.org/gitweb/?p=sigrok-util.git;a=blob;f=firmware/dreamsourcelab-dslogic/sigrok-fwextract-dreamsourcelab-dslogic sigrok-fwextract-dreamsourcelab-dslogic] script. It will download the correct files, rename them to the correct filenames as expected by libsigrok and install them.
'''Example usage''':
<small>
$ '''PREFIX=$HOME/sr ./sigrok-fwextract-dreamsourcelab-dslogic'''
</small>
This will install the files into '''$HOME/sr/share/sigrok-fimware'''. Without '''PREFIX''', the files will be installed into '''/usr/local/share/sigrok-firmware''' by default.
If you want to avoid using the script, you can manually download and rename the files (but check [http://sigrok.org/gitweb/?p=sigrok-util.git;a=blob;f=firmware/dreamsourcelab-dslogic/sigrok-fwextract-dreamsourcelab-dslogic the script] for the correct filenames).
'''Note:''' Do '''not''' use any files newer than those linked here, they're currently not supported. See [http://sigrok.org/bugzilla/show_bug.cgi?id=905 bug #905].


== Resources ==
== Resources ==


* [http://www.dreamsourcelab.com Vendor website]
* [http://www.dreamsourcelab.com/wiki/index.php Vendor wiki]
* [http://www.dreamsourcelab.com/forum/index.php Vendor forum]
* [http://www.dreamsourcelab.com/techspec.html Device specs]
* [https://www.kickstarter.com/projects/dreamsourcelab/dslogic-multifunction-instruments-for-everyone Kickstarter page]
* [https://www.kickstarter.com/projects/dreamsourcelab/dslogic-multifunction-instruments-for-everyone Kickstarter page]


[[Category:Device]]
[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Logic analyzer]]
[[Category:In progress]]
[[Category:Supported]]

Revision as of 00:04, 27 February 2017

DreamSourceLab DSLogic
DSLogic.png
Status supported
Source code fx2lafw
Channels 1-16
Samplerate 400MHz(4ch), 200MHz(8ch), 100MHz(16ch)
Samplerate (state) 50MHz
Triggers high, low, rising, falling, edge, multi-stage triggers
Min/max voltage -0.6V — 6V
Threshold voltage configurable: 3.3V, 5V
Memory 32MByte (2MByte/ch)
Compression no
Website dreamsourcelab.com

The DreamSourceLab DSLogic is a 16-channel USB-based logic analyzer, with sampling rates up to 400MHz (when using only 4 channels).

See DreamSourceLab DSLogic/Info for more details (such as lsusb -v output) about the device.

Hardware

Photos

Firmware

In order to use this device with libsigrok the vendor firmare and bitstream files are required.

The easiest method to install those is to use the sigrok-fwextract-dreamsourcelab-dslogic script. It will download the correct files, rename them to the correct filenames as expected by libsigrok and install them.

Example usage:

$ PREFIX=$HOME/sr ./sigrok-fwextract-dreamsourcelab-dslogic

This will install the files into $HOME/sr/share/sigrok-fimware. Without PREFIX, the files will be installed into /usr/local/share/sigrok-firmware by default.

If you want to avoid using the script, you can manually download and rename the files (but check the script for the correct filenames).

Note: Do not use any files newer than those linked here, they're currently not supported. See bug #905.

Resources