Difference between revisions of "Building"

From sigrok
Jump to navigation Jump to search
Line 21: Line 21:
* pkg-config >= 0.22
* pkg-config >= 0.22
** This is part of the standard [[OpenBSD]] install (not an extra package), apparently.
** This is part of the standard [[OpenBSD]] install (not an extra package), apparently.
* libglib >= 2.34.0
* libglib >= 2.32.0
* libzip >= 0.10
* libzip >= 0.10
* libserialport >= 0.1.0 (optional, used by some drivers)
* libserialport >= 0.1.0 (optional, used by some drivers)

Revision as of 17:11, 30 January 2015

This page documents the build requirements for the sigrok subprojects, and contains links to OS-specific instructions to build them from source.

Distribution packages and binaries

See Downloads for distribution packages of the sigrok subprojects and binary builds for various OSes.

See the instructions below if you want to build from source.

Build requirements

libsigrok

Requirements for the C library:

  • git (only needed when building from git)
  • gcc (>= 4.0) or clang
  • make
  • autoconf >= 2.63 (only needed when building from git)
  • automake >= 1.11 (only needed when building from git)
  • libtool (only needed when building from git)
  • pkg-config >= 0.22
    • This is part of the standard OpenBSD install (not an extra package), apparently.
  • libglib >= 2.32.0
  • libzip >= 0.10
  • libserialport >= 0.1.0 (optional, used by some drivers)
  • librevisa >= 0.0.20130412 (optional, used by some drivers)
  • libusb-1.0 >= 1.0.16 (optional, used by some drivers)
    • On FreeBSD, this is an integral part of the FreeBSD libc, not an extra package/library.
    • This is part of the standard OpenBSD install (not an extra package), apparently.
  • libftdi >= 0.16 or libftdi1 >= 1.0 (optional, used by some drivers)
  • libgpib (optional, used by some drivers; only available on Linux)
  • check >= 0.9.4 (optional, only needed to run unit tests)
  • doxygen (optional, only needed for the C API docs)
  • graphviz (optional, only needed for the C API docs)

Requirements for the C++ bindings:

  • libsigrok >= 0.3.0 (the libsigrok C library, see above)
  • A C++ compiler with C++11 support (-std=c++11 option), e.g.
    • g++ (>= 4.7)
    • clang++ (>= 3.1)
  • autoconf-archive (for the macro AX_CXX_COMPILE_STDCXX_11; only needed when building from git)
  • doxygen (required for building the bindings, not only for C++ API docs!)
  • graphviz (optional, only needed for the C++ API docs)
  • Python (2 or 3) executable (development files are not needed)
  • glibmm-2.4 (>= 2.32.0)

Requirements for the Python bindings:

  • libsigrokxx >= 0.3.0 (the libsigrok C++ bindings, see above)
  • Python >= 2.7 or Python >= 3 (including development files!)
  • Python setuptools (for Python 2 or 3)
  • pygobject >= 3.0.0 (for Python 2 or 3), a.k.a python-gi
  • numpy (for Python 2 or 3)
  • SWIG >= 2.0.0
  • doxygen (optional, only needed for the Python API docs)
  • graphviz (optional, only needed for the Python API docs)
  • doxypy (optional, only needed for the Python API docs)

Requirements for the Java bindings:

  • libsigrokxx >= 0.3.0 (the libsigrok C++ bindings, see above)
  • SWIG >= 2.0.0
  • Java JDK (for JNI includes and the javac/jar binaries)
  • doxygen (optional, only needed for the Java API docs)
  • graphviz (optional, only needed for the Java API docs)

libsigrokdecode

  • git (only needed when building from git)
  • gcc (>= 4.0) or clang
  • make
  • autoconf >= 2.63 (only needed when building from git)
  • automake >= 1.11 (only needed when building from git)
  • libtool (only needed when building from git)
  • pkg-config >= 0.22
    • This is part of the standard OpenBSD install (not an extra package), apparently.
  • libglib >= 2.24.0
  • Python >= 3.2
  • check >= 0.9.4 (optional, only needed to run unit tests)
  • doxygen (optional, only needed for the C API docs)
  • graphviz (optional, only needed for the C API docs)

sigrok-cli

  • git (only needed when building from git)
  • gcc or clang
  • make
  • autoconf >= 2.63 (only needed when building from git)
  • automake >= 1.11 (only needed when building from git)
  • libtool (only needed when building from git)
  • pkg-config >= 0.22
    • This is part of the standard OpenBSD install (not an extra package), apparently.
  • libglib >= 2.28.0
  • libsigrok >= 0.3.0
  • libsigrokdecode >= 0.3.0

PulseView

  • git (only needed when building from git)
  • A C++ compiler with C++11 support (-std=c++11 option), e.g.
    • g++ (>= 4.7)
    • clang++ (>= 3.1)
  • make
  • libtool (only needed when building from git)
  • pkg-config >= 0.22
    • This is part of the standard OpenBSD install (not an extra package), apparently.
  • cmake >= 2.8.6
  • libglib >= 2.28.0
  • Qt4 >= 4.5 or Qt5 (including the following components):
    • Qt4: QtCore, QtGui, QtSvg
    • Qt5: Qt5Core, Qt5Gui, Qt5Widgets, Qt5Svg
  • libboost >= 1.42 (including the following libs):
    • libboost-sytem
    • libboost-filesystem
    • libboost-thread
    • libboost-test (optional, only needed to run unit tests)
  • libsigrokcxx >= 0.3.0 (libsigrok C++ bindings)
  • libsigrokdecode >= 0.3.0
  • libsigrokandroidutils >= 0.1.0 (optional, only needed on Android)

Building from source

See the OS-specific build instructions below if you want to build the sigrok subprojects from source:

FAQ

Warning: AX_CXX_COMPILE_STDCXX_11 macro not found

libsigrok's autogen.sh outputs the following warning:

--- Warning: AX_CXX_COMPILE_STDCXX_11 macro not found.
--- You won't be able to build the language bindings!

That means that the m4 macro used to detect C++11 support was not found. Use the package manager of your distribution/OS to install the package that included the macro. Most distributions package this file in a package called autoconf-archive or similar.

Warning: AX_CXX_COMPILE_STDCXX_11 macro is too old

libsigrok's autogen.sh outputs the following warning:

--- Warning: AX_CXX_COMPILE_STDCXX_11 macro is too old.
--- (found version <version>, at least 4 is required)
--- You won't be able to build the language bindings!

That means that the version of the macro included with your distribution/OS is too old. You can:

  • Download the latest version of the macro from here, and use the ACLOCAL_PATH environment variable to point aclocal to the file:
$ ACLOCAL_PATH=/path/to/directory/containing/macro ./autogen.sh
  • Download the latest version of the macro and overwrite the file included with your distribution, most often located in /usr/share/aclocal.

Cannot open shared object file: No such file or directory

You get the following error:

error while loading shared libraries: libsigrok.so.0: cannot open shared object file: No such file or directory

Run ldconfig with the proper installation lib directory where you installed the sigrok related libraries, e.g.:

$ sudo ldconfig /usr/local/lib

TEST FAILED: .../lib/python2.7/site-packages/ does NOT support .pth files

You get the following error when trying to run libsigrok's make install step:

TEST FAILED: .../lib/python2.7/site-packages/ does NOT support .pth files
error: bad install directory or PYTHONPATH

You are attempting to install a package to a directory that is not
on PYTHONPATH and which Python does not read ".pth" files from.  The
installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:

    .../lib/python2.7/site-packages/

and your PYTHONPATH environment variable currently contains:

    ''

Here are some of your options for correcting the problem:

* You can choose a different installation directory, i.e., one that is
  on PYTHONPATH or supports .pth files

* You can add the installation directory to the PYTHONPATH environment
  variable.  (It must then also be on PYTHONPATH whenever you run
  Python and want to use the package(s) you are installing.)

* You can set up the installation directory to support ".pth" files by
  using one of the approaches described here:

  https://pythonhosted.org/setuptools/easy_install.html#custom-installation-locations

Please make the appropriate changes for your system and try again.

This can be fixed using multiple ways (see text above), but the simplest is probably to run:

$ PYTHONPATH=.../lib/python2.7/site-packages make install

(replace the "..." with the correct path that is shown in your console output)

Cannot access USB / serial / other device

Please read libsigrok's README.devices file for any extra steps you may need to take to get your specific device working. This includes USB devices (you might need to use a udev rules file), serial devices (you might need permissions for accessing them), and various other devices (you might need firmware/bitstream files, or other things).

Also check the wiki page for your respective device as well for more hints.