X-Git-Url: http://sigrok.org/gitweb/?p=sigrok-firmware-fx2lafw.git;a=blobdiff_plain;f=fx2lib%2Fexamples%2Feeprom%2Fclient.py;fp=fx2lib%2Fexamples%2Feeprom%2Fclient.py;h=80d630f5747ac6b6f40c996826df56c06e0efbbb;hp=0000000000000000000000000000000000000000;hb=3608c1063d17c56c038434eba5a6b11f26e530b5;hpb=8b13135e5fd175911ad9d8283b17fc97fe0c7709

diff --git a/fx2lib/examples/eeprom/client.py b/fx2lib/examples/eeprom/client.py
new file mode 100644
index 00000000..80d630f5
--- /dev/null
+++ b/fx2lib/examples/eeprom/client.py
@@ -0,0 +1,92 @@
+# Copyright (C) 2009 Ubixum, Inc. 
+#
+# This library is free software; you can redistribute it and/or
+#
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+# 
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+# 
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+import sys
+from fx2load import *
+
+
+def get_eeprom(addr,length):
+ assert f.isopen()
+
+ prom_val = '';
+ while len(prom_val)<length:
+     buf='\x00'*1024 # read 1024 bytes max at a time
+     transfer_len = length-len(prom_val) > 1024 and 1024 or length-len(prom_val)
+     ret=f.do_usb_command ( buf,
+         0xc0,
+         0xb1,
+       addr+len(prom_val),0,transfer_len )
+     if (ret>=0):
+        prom_val += buf[:ret]
+     else: 
+        raise Exception("eeprom read didn't work: %d" % ret )
+ return prom_val
+  
+  
+def hexchartoint(c):
+    return int(c.encode('hex'),16)
+  
+
+def fetch_eeprom():
+ """
+   See TRM 3.4.2, 3.4,3.
+   This function dynamically determines how much data to read for c2 eeprom data and downloads
+   the eeprom iic file.
+ """
+ assert f.isopen()
+ # fetch 1st 8 bytes
+ prom=get_eeprom(0,8)
+ if prom[0] == '\xc0':
+    return prom # c0 blocks are 8 bytes long
+ if prom[0] != '\xc2': raise Exception ( "Envalid eeprom (%s)" % prom[0].encode('hex') )
+ # the length of the 1st data block is bytes 8,9 (0 based)
+ read_addr=8
+ while True:
+    size_read = get_eeprom(read_addr,4) # get the data length and start address
+    prom += size_read
+    read_addr+=4
+    # if this is the end 0x80 0x01 0xe6 0x00, then break
+    if size_read == '\x80\x01\xe6\x00': break
+    # else it is a data block 
+    size = (hexchartoint(size_read[0]) << 8) + hexchartoint(size_read[1])
+    print "Next eeprom data size %d" % size
+    prom += get_eeprom(read_addr,size)
+    read_addr+=size
+ # one last byte
+ prom += get_eeprom(read_addr,1) # should always be 0
+ assert prom[-1] == '\x00'
+ return prom
+ 
+
+def set_eeprom(prom):
+   assert f.isopen()
+   bytes_written=0;
+   while bytes_written<len(prom):
+        # attemp 1024 at a time
+        to_write=len(prom)-bytes_written > 1024 and 1024 or len(prom)-bytes_written
+        print "Writing %d Bytes.." % to_write
+        ret=f.do_usb_command(prom[bytes_written:bytes_written+to_write], 0x40,0xb1,bytes_written, 0, to_write, 10000)
+        if ret>0:
+            bytes_written += ret;
+        else:
+            raise Exception ( "eeprom write didn't work: %d" % ret )
+ 
+
+if __name__=='__main__':
+
+   openfx2(0x04b4,0x0083) # vid/pid of eeprom firmware 
+