Finish Spanish (Mexico) translation

[pulseview.git] / l10n / mx.ts

diff --git a/l10n/mx.ts b/l10n/mx.ts
index a03b5a862b444ecbab5766f8514fa3d04896eee9..7e9d60024055a8913ca10d9aeb6ff3a83e990a70 100644 (file)
--- a/l10n/mx.ts
+++ b/l10n/mx.ts
@@ -19,12 +19,12 @@
     <message>
         <location filename="../pv/devices/device.cpp" line="70"/>
         <source>Querying config key %1 is not allowed</source>
-        <translation type="unfinished">No se permite consultar la key de configuración %1</translation>
+        <translation>No se permite consultar la clave de configuración %1</translation>
     </message>
     <message>
         <location filename="../pv/devices/device.cpp" line="79"/>
         <source>Querying config key %1 resulted in %2</source>
-        <translation type="unfinished">La consulta de la clave de configuración %1 resultó en %2</translation>
+        <translation>La consulta de la clave de configuración %1 resultó en %2</translation>
     </message>
     <message>
         <location filename="../pv/devices/device.cpp" line="93"/>
@@ -56,7 +56,7 @@
         <location filename="../main.cpp" line="130"/>
         <source>When %1 last crashed, it created a stack trace.
 A human-readable form has been saved to disk and was written to the log. You may access it from the settings dialog.</source>
-        <translation type="unfinished"></translation>
+        <translation>Cuando %1 se bloqueó por última vez, creó un stack trace.\nSe guardó un formulario legible en el disco y fue escrito en el log. Puedes acceder a el desde el dialogo de configuración.</translation>
     </message>
     <message>
         <location filename="../pv/devicemanager.cpp" line="65"/>
@@ -66,7 +66,7 @@ A human-readable form has been saved to disk and was written to the log. You may
     <message>
         <location filename="../pv/devicemanager.cpp" line="96"/>
         <source>Scanning for devices that driver %1 can access...</source>
-        <translation type="unfinished"></translation>
+        <translation>Buscando dispositivos a los que el controlador %1 puede acceder...</translation>
     </message>
 </context>
 <context>
@@ -94,7 +94,7 @@ A human-readable form has been saved to disk and was written to the log. You may
     <message>
         <location filename="../pv/mainwindow.cpp" line="517"/>
         <source>Start/Stop Acquisition</source>
-        <translation type="unfinished"></translation>
+        <translation>Iniciar/Detener Adquisición</translation>
     </message>
     <message>
         <location filename="../pv/mainwindow.cpp" line="525"/>
@@ -127,13 +127,13 @@ A human-readable form has been saved to disk and was written to the log. You may
     <message>
         <location filename="../pv/mainwindow.cpp" line="633"/>
         <source>There is unsaved data. Close anyway?</source>
-        <translation type="unfinished"></translation>
+        <translation>Hay datos sin guardar. Cerrar de todos modos?</translation>
     </message>
     <message>
         <location filename="../pv/mainwindow.cpp" line="827"/>
         <location filename="../pv/mainwindow.cpp" line="853"/>
         <source>This session contains unsaved data. Close it anyway?</source>
-        <translation type="unfinished"></translation>
+        <translation>Esta sesión contiene datos sin almacenar. Cerrar de todos modos?</translation>
     </message>
 </context>
 <context>
@@ -141,47 +141,47 @@ A human-readable form has been saved to disk and was written to the log. You may
     <message>
         <location filename="../pv/session.cpp" line="481"/>
         <source>Failed to select device</source>
-        <translation type="unfinished"></translation>
+        <translation>Error al seleccionar dispositivo</translation>
     </message>
     <message>
         <location filename="../pv/session.cpp" line="530"/>
         <source>Failed to open device</source>
-        <translation type="unfinished"></translation>
+        <translation>Error al abrir dispositivo</translation>
     </message>
     <message>
         <location filename="../pv/session.cpp" line="632"/>
         <source>Error</source>
-        <translation type="unfinished">Error</translation>
+        <translation>Error</translation>
     </message>
     <message>
         <location filename="../pv/session.cpp" line="633"/>
         <source>Unexpected input format: %s</source>
-        <translation type="unfinished"></translation>
+        <translation>Formato de entrada inesperado: %s</translation>
     </message>
     <message>
         <location filename="../pv/session.cpp" line="668"/>
         <source>Failed to load %1</source>
-        <translation type="unfinished"></translation>
+        <translation>Error al cargar %1</translation>
     </message>
     <message>
         <location filename="../pv/session.cpp" line="703"/>
         <source>No active device set, can&apos;t start acquisition.</source>
-        <translation type="unfinished"></translation>
+        <translation>No hay un dispositivo activo configurado, no se puede iniciar la adquisición.</translation>
     </message>
     <message>
         <location filename="../pv/session.cpp" line="716"/>
         <source>No channels enabled.</source>
-        <translation type="unfinished"></translation>
+        <translation>No hay canales habilitados.</translation>
     </message>
     <message>
         <location filename="../pv/session.cpp" line="1171"/>
         <source>Out of memory, acquisition stopped.</source>
-        <translation type="unfinished"></translation>
+        <translation>Sin memoria, la adquisición se detuvo.</translation>
     </message>
     <message>
         <location filename="../pv/session.cpp" line="1377"/>
         <source>Can&apos;t handle more than 64 logic channels.</source>
-        <translation type="unfinished"></translation>
+        <translation>No puede manejar más de 64 canales lógicos.</translation>
     </message>
 </context>
 <context>
@@ -189,28 +189,28 @@ A human-readable form has been saved to disk and was written to the log. You may
     <message>
         <location filename="../pv/storesession.cpp" line="114"/>
         <source>Can&apos;t save logic channel without data.</source>
-        <translation type="unfinished"></translation>
+        <translation>No se puede guardar el canal lógico sin datos.</translation>
     </message>
     <message>
         <location filename="../pv/storesession.cpp" line="130"/>
         <source>Can&apos;t save analog channel without data.</source>
-        <translation type="unfinished"></translation>
+        <translation>No se puede guardar el canal analógico sin datos.</translation>
     </message>
     <message>
         <location filename="../pv/storesession.cpp" line="142"/>
         <source>No channels enabled.</source>
-        <translation type="unfinished"></translation>
+        <translation>No hay canales habilitados.</translation>
     </message>
     <message>
         <location filename="../pv/storesession.cpp" line="167"/>
         <source>Can&apos;t save range without sample data.</source>
-        <translation type="unfinished"></translation>
+        <translation>No se puede guardar el rango sin datos de muestra.</translation>
     </message>
     <message>
         <location filename="../pv/storesession.cpp" line="188"/>
         <location filename="../pv/storesession.cpp" line="295"/>
         <source>Error while saving: </source>
-        <translation type="unfinished"></translation>
+        <translation>Error al guardar: </translation>
     </message>
 </context>
 <context>
@@ -218,32 +218,32 @@ A human-readable form has been saved to disk and was written to the log. You may
     <message>
         <location filename="../pv/data/decodesignal.cpp" line="194"/>
         <source>No decoders</source>
-        <translation type="unfinished"></translation>
+        <translation>Sin decodificadores</translation>
     </message>
     <message>
         <location filename="../pv/data/decodesignal.cpp" line="201"/>
         <source>There are no channels assigned to this decoder</source>
-        <translation type="unfinished"></translation>
+        <translation>No hay canales asignados a este decodificador</translation>
     </message>
     <message>
         <location filename="../pv/data/decodesignal.cpp" line="215"/>
         <source>One or more required channels have not been specified</source>
-        <translation type="unfinished"></translation>
+        <translation>No se han especificado uno o más canales requeridos</translation>
     </message>
     <message>
         <location filename="../pv/data/decodesignal.cpp" line="234"/>
         <source>No input data</source>
-        <translation type="unfinished"></translation>
+        <translation>Sin datos de entrada</translation>
     </message>
     <message>
         <location filename="../pv/data/decodesignal.cpp" line="1160"/>
         <source>Decoder reported an error</source>
-        <translation type="unfinished"></translation>
+        <translation>El decodificador reportó un error</translation>
     </message>
     <message>
         <location filename="../pv/data/decodesignal.cpp" line="1296"/>
         <source>Failed to create decoder instance</source>
-        <translation type="unfinished"></translation>
+        <translation>Error al crear la instancia del decodificador</translation>
     </message>
 </context>
 <context>
@@ -251,52 +251,52 @@ A human-readable form has been saved to disk and was written to the log. You may
     <message>
         <location filename="../pv/data/signalbase.cpp" line="409"/>
         <source>Signal average</source>
-        <translation type="unfinished"></translation>
+        <translation>Promedio de la señal</translation>
     </message>
     <message>
         <location filename="../pv/data/signalbase.cpp" line="410"/>
         <source>0.9V (for 1.8V CMOS)</source>
-        <translation type="unfinished"></translation>
+        <translation>0.9V (para 1.8V CMOS)</translation>
     </message>
     <message>
         <location filename="../pv/data/signalbase.cpp" line="411"/>
         <source>1.8V (for 3.3V CMOS)</source>
-        <translation type="unfinished"></translation>
+        <translation>1.8V (para 3.3V CMOS)</translation>
     </message>
     <message>
         <location filename="../pv/data/signalbase.cpp" line="412"/>
         <source>2.5V (for 5.0V CMOS)</source>
-        <translation type="unfinished"></translation>
+        <translation>2.5V (para 5.0V CMOS)</translation>
     </message>
     <message>
         <location filename="../pv/data/signalbase.cpp" line="413"/>
         <source>1.5V (for TTL)</source>
-        <translation type="unfinished"></translation>
+        <translation>1.5V (para TTL)</translation>
     </message>
     <message>
         <location filename="../pv/data/signalbase.cpp" line="418"/>
         <source>Signal average +/- 15%</source>
-        <translation type="unfinished"></translation>
+        <translation>Promedio de la señal +/- 15%</translation>
     </message>
     <message>
         <location filename="../pv/data/signalbase.cpp" line="419"/>
         <source>0.3V/1.2V (for 1.8V CMOS)</source>
-        <translation type="unfinished"></translation>
+        <translation>0.3V/1.2V (para 1.8V CMOS)</translation>
     </message>
     <message>
         <location filename="../pv/data/signalbase.cpp" line="420"/>
         <source>0.7V/2.5V (for 3.3V CMOS)</source>
-        <translation type="unfinished"></translation>
+        <translation>0.7V/2.5V (para 3.3V CMOS)</translation>
     </message>
     <message>
         <location filename="../pv/data/signalbase.cpp" line="421"/>
         <source>1.3V/3.7V (for 5.0V CMOS)</source>
-        <translation type="unfinished"></translation>
+        <translation>1.3V/3.7V (para 5.0V CMOS)</translation>
     </message>
     <message>
         <location filename="../pv/data/signalbase.cpp" line="422"/>
         <source>0.8V/2.0V (for TTL)</source>
-        <translation type="unfinished"></translation>
+        <translation>0.8V/2.0V (para TTL)</translation>
     </message>
 </context>
 <context>
@@ -304,52 +304,52 @@ A human-readable form has been saved to disk and was written to the log. You may
     <message>
         <location filename="../pv/dialogs/connect.cpp" line="58"/>
         <source>&amp;Scan for devices using driver above</source>
-        <translation type="unfinished"></translation>
+        <translation>E&amp;Scanea por dispositivos utilizando el driver de arriba</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/connect.cpp" line="63"/>
         <source>Connect to Device</source>
-        <translation type="unfinished"></translation>
+        <translation>Conectarse al dispositivo</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/connect.cpp" line="75"/>
         <source>Step 1: Choose the driver</source>
-        <translation type="unfinished"></translation>
+        <translation>Paso 1: Elige el driver</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/connect.cpp" line="79"/>
         <source>&amp;USB</source>
-        <translation type="unfinished"></translation>
+        <translation>&amp;USB</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/connect.cpp" line="80"/>
         <source>Serial &amp;Port</source>
-        <translation type="unfinished"></translation>
+        <translation>&amp;Puerto Serial</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/connect.cpp" line="81"/>
         <source>&amp;TCP/IP</source>
-        <translation type="unfinished"></translation>
+        <translation>&amp;TCP/IP</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/connect.cpp" line="116"/>
         <source>Protocol:</source>
-        <translation type="unfinished"></translation>
+        <translation>Protocolo:</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/connect.cpp" line="134"/>
         <source>Step 2: Choose the interface</source>
-        <translation type="unfinished"></translation>
+        <translation>Paso 2: Elige la interfaz</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/connect.cpp" line="140"/>
         <source>Step 3: Scan for devices</source>
-        <translation type="unfinished"></translation>
+        <translation>Paso 3: Escanear por dispositivos</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/connect.cpp" line="146"/>
         <source>Step 4: Select the device</source>
-        <translation type="unfinished"></translation>
+        <translation>Paso 4: Selecciona el dispositivo</translation>
     </message>
 </context>
 <context>
@@ -363,255 +363,255 @@ A human-readable form has been saved to disk and was written to the log. You may
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="143"/>
         <source>Views</source>
-        <translation type="unfinished"></translation>
+        <translation>Vistas</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="153"/>
         <location filename="../pv/dialogs/settings.cpp" line="397"/>
         <source>Decoders</source>
-        <translation type="unfinished"></translation>
+        <translation>Decodificadores</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="163"/>
         <source>About</source>
-        <translation type="unfinished"></translation>
+        <translation>Acerca de</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="172"/>
         <source>Logging</source>
-        <translation type="unfinished"></translation>
+        <translation>Logging</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="236"/>
         <source>User interface language</source>
-        <translation type="unfinished"></translation>
+        <translation>Lenguaje de la interfaz de usuario</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="247"/>
         <source>User interface theme</source>
-        <translation type="unfinished"></translation>
+        <translation>Tema de la interfaz de usuario</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="249"/>
         <source>(You may need to restart PulseView for all UI elements to update)</source>
-        <translation type="unfinished"></translation>
+        <translation>(Es posible que deba reiniciar PulseView para que se actualicen todos los elementos de la interfaz de usuario)</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="255"/>
         <source>System Default</source>
-        <translation type="unfinished"></translation>
+        <translation>Default del sistema</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="268"/>
         <source>Qt widget style</source>
-        <translation type="unfinished"></translation>
+        <translation>Estilo de Qt widget</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="270"/>
         <source>(Dark themes look best with the Fusion style)</source>
-        <translation type="unfinished"></translation>
+        <translation>(Los temas oscuros se ven mejor con el estilo Fusion)</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="277"/>
         <source>Save session &amp;setup along with .sr file</source>
-        <translation type="unfinished"></translation>
+        <translation>Guardar &amp;configuración de sesión junto al archivo .sr</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="291"/>
         <source>Trace View</source>
-        <translation type="unfinished"></translation>
+        <translation>Vista de trazo</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="299"/>
         <source>Use colored trace &amp;background</source>
-        <translation type="unfinished"></translation>
+        <translation>Use &amp;fondo de trazas coloreado</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="303"/>
         <source>Constantly perform &amp;zoom-to-fit during acquisition</source>
-        <translation type="unfinished"></translation>
+        <translation>Realizar constantemente zoom para &amp;ajustar durante la adquisición</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="307"/>
         <source>Perform a zoom-to-&amp;fit when acquisition stops</source>
-        <translation type="unfinished"></translation>
+        <translation>Realice un zoom para ajustar cuando la adquisición se &amp;detenga</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="311"/>
         <source>Show time zero at the trigger</source>
-        <translation type="unfinished"></translation>
+        <translation>Mostrar el tiempo cero en el trigger</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="315"/>
         <source>Always keep &amp;newest samples at the right edge during capture</source>
-        <translation type="unfinished"></translation>
+        <translation>Mantenga siempre las muestras más &amp;recientes en el borde derecho durante la captura</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="319"/>
         <source>Show data &amp;sampling points</source>
-        <translation type="unfinished"></translation>
+        <translation>Mostrar puntos de datos &amp;sampleados</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="323"/>
         <source>Fill high areas of logic signals</source>
-        <translation type="unfinished"></translation>
+        <translation>Rellenar áreas altas de señales lógicas</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="330"/>
         <source>Color to fill high areas of logic signals with</source>
-        <translation type="unfinished"></translation>
+        <translation>Color para llenar áreas altas de señales lógicas</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="334"/>
         <source>Show analog minor grid in addition to div grid</source>
-        <translation type="unfinished"></translation>
+        <translation>Mostrar cuadrícula menor analogíca además de cuadrícula por div</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="338"/>
         <source>Highlight mouse cursor using a vertical marker line</source>
-        <translation type="unfinished"></translation>
+        <translation>Resalte el cursor del mouse usando una línea de marcador vertical</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="342"/>
         <location filename="../pv/dialogs/settings.cpp" line="368"/>
         <location filename="../pv/dialogs/settings.cpp" line="377"/>
         <source> pixels</source>
-        <translation type="unfinished"></translation>
+        <translation> píxeles</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="347"/>
         <source>Maximum distance from edges before markers snap to them</source>
-        <translation type="unfinished"></translation>
+        <translation>Distancia máxima desde los bordes antes de que los marcadores se ajusten a ellos</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="354"/>
         <source>Color to fill cursor area with</source>
-        <translation type="unfinished"></translation>
+        <translation>Color para llenar el área del cursor</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="357"/>
         <source>None</source>
-        <translation type="unfinished"></translation>
+        <translation>Ninguna</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="358"/>
         <source>Background</source>
-        <translation type="unfinished"></translation>
+        <translation>Fondo</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="359"/>
         <source>Dots</source>
-        <translation type="unfinished"></translation>
+        <translation>Puntos</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="364"/>
         <source>Conversion threshold display mode (analog traces only)</source>
-        <translation type="unfinished"></translation>
+        <translation>Modo de visualización del umbral de conversión (solo trazas analógicas)</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="373"/>
         <source>Default analog trace div height</source>
-        <translation type="unfinished"></translation>
+        <translation>Altura de div de trazo análogo por defecto</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="382"/>
         <source>Default logic trace height</source>
-        <translation type="unfinished"></translation>
+        <translation>Altura de trazo lógico por defecto</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="405"/>
         <source>Allow configuration of &amp;initial signal state</source>
-        <translation type="unfinished"></translation>
+        <translation>Permitir configuración de estado de señal &amp;inicial</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="409"/>
         <source>Always show all &amp;rows, even if no annotation is visible</source>
-        <translation type="unfinished"></translation>
+        <translation>Mostrar siempre todas las &amp;filas, incluso si no hay ninguna anotación visible</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="417"/>
         <source>Annotation export format</source>
-        <translation type="unfinished"></translation>
+        <translation>Formato de exportación de anotaciones</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="418"/>
         <source>%s = sample range; %d: decoder name; %r: row name; %c: class name</source>
-        <translation type="unfinished"></translation>
+        <translation>%s = rango de muestra; %d: nombre del decodificador; %r: nombre de fila; %c: nombre de clase</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="421"/>
         <source>%1: longest annotation text; %a: all annotation texts; %q: use quotation marks</source>
-        <translation type="unfinished"></translation>
+        <translation>%1: texto de anotación más largo; %a: todos los textos de anotación; %q: use comillas</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="441"/>
         <source>%1&lt;br /&gt;&lt;a href=&quot;http://%2&quot;&gt;%2&lt;/a&gt;</source>
-        <translation type="unfinished"></translation>
+        <translation>%1&lt;br /&gt;&lt;a href=&quot;http://%2&quot;&gt;%2&lt;/a&gt;</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="442"/>
         <source>GNU GPL, version 3 or later</source>
-        <translation type="unfinished"></translation>
+        <translation>GNU GPL, versión 3 o posterior</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="453"/>
         <source>Versions, libraries and features:</source>
-        <translation type="unfinished"></translation>
+        <translation>Versiones, librerías y características:</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="460"/>
         <source>Firmware search paths:</source>
-        <translation type="unfinished"></translation>
+        <translation>Rutas de búsqueda de firmware:</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="467"/>
         <source>Protocol decoder search paths:</source>
-        <translation type="unfinished"></translation>
+        <translation>Ruta de búsqueda del decodificador de protocolo:</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="474"/>
         <source>Supported hardware drivers:</source>
-        <translation type="unfinished"></translation>
+        <translation>Drivers de hardware soportados:</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="481"/>
         <source>Supported input formats:</source>
-        <translation type="unfinished"></translation>
+        <translation>Formatos de entrada soportados:</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="488"/>
         <source>Supported output formats:</source>
-        <translation type="unfinished"></translation>
+        <translation>Formatos de salida soportados:</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="496"/>
         <source>Supported protocol decoders:</source>
-        <translation type="unfinished"></translation>
+        <translation>Decodificadores de protocolo soportados:</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="537"/>
         <source>Log level:</source>
-        <translation type="unfinished"></translation>
+        <translation>Nivel de log:</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="542"/>
         <source> lines</source>
-        <translation type="unfinished"></translation>
+        <translation> líneas</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="551"/>
         <source>Length of background buffer:</source>
-        <translation type="unfinished"></translation>
+        <translation>Longitud del búfer de fondo:</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="557"/>
         <source>&amp;Save to File</source>
-        <translation type="unfinished"></translation>
+        <translation>&amp;Guardar en archivo</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="564"/>
         <source>&amp;Pop out</source>
-        <translation type="unfinished"></translation>
+        <translation>&amp;Pop out</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="633"/>
@@ -619,7 +619,7 @@ A human-readable form has been saved to disk and was written to the log. You may
 Should I set the user-adjustable colors to better suit your choice?
 
 Please keep in mind that PulseView may need a restart to display correctly.</source>
-        <translation type="unfinished"></translation>
+        <translation>Seleccionaste el tema obscuro.\nDebería de establecer los colores ajustables por el usuario que mejor se ajustan a tu elección?\n\nPor favor ten en cuenta que Pulseview tal vez se tenga que reiniciar para mostrar correctamente.</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="639"/>
@@ -627,42 +627,42 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
 Should I set the user-adjustable colors to better suit your choice?
 
 Please keep in mind that PulseView may need a restart to display correctly.</source>
-        <translation type="unfinished"></translation>
+        <translation>Seleccionaste el tema brillante.\nDebería de establecer los colores ajustables por el usuario que mejor se ajustan a tu elección?\n\nPor favor ten en cuenta que Pulseview tal vez se tenga que reiniciar para mostrar correctamente.</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="792"/>
         <source>Save Log</source>
-        <translation type="unfinished"></translation>
+        <translation>Guardar log</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="792"/>
         <source>Log Files (*.txt *.log);;All Files (*)</source>
-        <translation type="unfinished"></translation>
+        <translation>Archivos de log (*.txt *.log);;Todos los archivos (*)</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="804"/>
         <source>Success</source>
-        <translation type="unfinished"></translation>
+        <translation>Éxito</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="804"/>
         <source>Log saved to %1.</source>
-        <translation type="unfinished"></translation>
+        <translation>Log guardado en %1.</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="814"/>
         <source>Error</source>
-        <translation type="unfinished"></translation>
+        <translation>Error</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="814"/>
         <source>File %1 could not be written to.</source>
-        <translation type="unfinished"></translation>
+        <translation>No se pudo escribir en el archivo%1.</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/settings.cpp" line="828"/>
         <source>%1 Log</source>
-        <translation type="unfinished"></translation>
+        <translation>%1 Log</translation>
     </message>
 </context>
 <context>
@@ -670,17 +670,17 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
     <message>
         <location filename="../pv/dialogs/storeprogress.cpp" line="44"/>
         <source>Saving...</source>
-        <translation type="unfinished"></translation>
+        <translation>Guardando...</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/storeprogress.cpp" line="44"/>
         <source>Cancel</source>
-        <translation type="unfinished"></translation>
+        <translation>Cancelar</translation>
     </message>
     <message>
         <location filename="../pv/dialogs/storeprogress.cpp" line="85"/>
         <source>Failed to save session.</source>
-        <translation type="unfinished"></translation>
+        <translation>Error al guardar sesión.</translation>
     </message>
 </context>
 <context>
@@ -691,55 +691,55 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
         <location filename="../pv/popups/channels.cpp" line="273"/>
         <location filename="../pv/popups/channels.cpp" line="300"/>
         <source>All</source>
-        <translation type="unfinished"></translation>
+        <translation>Todo</translation>
     </message>
     <message>
         <location filename="../pv/popups/channels.cpp" line="64"/>
         <location filename="../pv/popups/channels.cpp" line="65"/>
         <source>Logic</source>
-        <translation type="unfinished"></translation>
+        <translation>Lógico</translation>
     </message>
     <message>
         <location filename="../pv/popups/channels.cpp" line="66"/>
         <location filename="../pv/popups/channels.cpp" line="67"/>
         <source>Analog</source>
-        <translation type="unfinished"></translation>
+        <translation>Análogo</translation>
     </message>
     <message>
         <location filename="../pv/popups/channels.cpp" line="68"/>
         <source>Named</source>
-        <translation type="unfinished"></translation>
+        <translation>Nombrado</translation>
     </message>
     <message>
         <location filename="../pv/popups/channels.cpp" line="69"/>
         <source>Unnamed</source>
-        <translation type="unfinished"></translation>
+        <translation>Sin nombre</translation>
     </message>
     <message>
         <location filename="../pv/popups/channels.cpp" line="70"/>
         <source>Changing</source>
-        <translation type="unfinished"></translation>
+        <translation>Cambiando</translation>
     </message>
     <message>
         <location filename="../pv/popups/channels.cpp" line="71"/>
         <source>Non-changing</source>
-        <translation type="unfinished"></translation>
+        <translation>Sin cambios</translation>
     </message>
     <message>
         <location filename="../pv/popups/channels.cpp" line="141"/>
         <source>Disable: </source>
-        <translation type="unfinished"></translation>
+        <translation>Deshabilitar: </translation>
     </message>
     <message>
         <location filename="../pv/popups/channels.cpp" line="149"/>
         <source>Enable: </source>
-        <translation type="unfinished"></translation>
+        <translation>Habilitar: </translation>
     </message>
     <message>
         <location filename="../pv/popups/channels.cpp" line="281"/>
         <location filename="../pv/popups/channels.cpp" line="301"/>
         <source>None</source>
-        <translation type="unfinished"></translation>
+        <translation>Ninguna</translation>
     </message>
 </context>
 <context>
@@ -748,7 +748,7 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
         <location filename="../pv/prop/bool.cpp" line="51"/>
         <location filename="../pv/prop/bool.cpp" line="82"/>
         <source>Querying config key %1 resulted in %2</source>
-        <translation type="unfinished">La consulta de la clave de configuración %1 resultó en %2</translation>
+        <translation>La consulta de la clave de configuración %1 resultó en %2</translation>
     </message>
 </context>
 <context>
@@ -757,7 +757,7 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
         <location filename="../pv/prop/double.cpp" line="65"/>
         <location filename="../pv/prop/double.cpp" line="96"/>
         <source>Querying config key %1 resulted in %2</source>
-        <translation type="unfinished">La consulta de la clave de configuración %1 resultó en %2</translation>
+        <translation>La consulta de la clave de configuración %1 resultó en %2</translation>
     </message>
 </context>
 <context>
@@ -766,7 +766,7 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
         <location filename="../pv/prop/enum.cpp" line="113"/>
         <location filename="../pv/prop/enum.cpp" line="176"/>
         <source>Querying config key %1 resulted in %2</source>
-        <translation type="unfinished">La consulta de la clave de configuración %1 resultó en %2</translation>
+        <translation>La consulta de la clave de configuración %1 resultó en %2</translation>
     </message>
 </context>
 <context>
@@ -775,7 +775,7 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
         <location filename="../pv/prop/int.cpp" line="65"/>
         <location filename="../pv/prop/int.cpp" line="128"/>
         <source>Querying config key %1 resulted in %2</source>
-        <translation type="unfinished">La consulta de la clave de configuración %1 resultó en %2</translation>
+        <translation>La consulta de la clave de configuración %1 resultó en %2</translation>
     </message>
 </context>
 <context>
@@ -784,7 +784,7 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
         <location filename="../pv/prop/string.cpp" line="59"/>
         <location filename="../pv/prop/string.cpp" line="84"/>
         <source>Querying config key %1 resulted in %2</source>
-        <translation type="unfinished">La consulta de la clave de configuración %1 resultó en %2</translation>
+        <translation>La consulta de la clave de configuración %1 resultó en %2</translation>
     </message>
 </context>
 <context>
@@ -815,7 +815,7 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
     <message>
         <location filename="../pv/subwindows/decoder_selector/subwindow.cpp" line="49"/>
         <source>Select a decoder to see its description here.</source>
-        <translation type="unfinished">Seleccione un decoder para ver su descripción aquí.</translation>
+        <translation>Seleccione un decoder para ver su descripción aquí.</translation>
     </message>
     <message>
         <location filename="../pv/subwindows/decoder_selector/subwindow.cpp" line="247"/>
@@ -825,12 +825,12 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
     <message>
         <location filename="../pv/subwindows/decoder_selector/subwindow.cpp" line="264"/>
         <source>&lt;p align=&apos;right&apos;&gt;Tags: %1&lt;/p&gt;</source>
-        <translation type="unfinished"></translation>
+        <translation>&lt;p align=&apos;right&apos;&gt;Tags: %1&lt;/p&gt;</translation>
     </message>
     <message>
         <location filename="../pv/subwindows/decoder_selector/subwindow.cpp" line="311"/>
         <source>Protocol decoder &lt;b&gt;%1&lt;/b&gt; requires input type &lt;b&gt;%2&lt;/b&gt; which several decoders provide.&lt;br&gt;Choose which one to use:&lt;br&gt;</source>
-        <translation type="unfinished"></translation>
+        <translation>Decodificador de protocolo &lt;b&gt;%1&lt;/b&gt; requiere tipo de entrada &lt;b&gt;%2&lt;/b&gt; que proporcionan varios decodificadores.&lt;br&gt;Elige cúal usar:&lt;br&gt;</translation>
     </message>
     <message>
         <location filename="../pv/subwindows/decoder_selector/subwindow.cpp" line="319"/>
@@ -843,166 +843,166 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="120"/>
         <source>New &amp;View</source>
-        <translation type="unfinished"></translation>
+        <translation>Nueva &amp;Vista</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="126"/>
         <source>&amp;Open...</source>
-        <translation type="unfinished"></translation>
+        <translation>&amp;Abrir...</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="133"/>
         <source>Restore Session Setu&amp;p...</source>
-        <translation type="unfinished"></translation>
+        <translation>Restaurar Configu&amp;ración de Sesión...</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="137"/>
         <source>&amp;Save As...</source>
-        <translation type="unfinished"></translation>
+        <translation>G&amp;uardar Como...</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="144"/>
         <source>Save Selected &amp;Range As...</source>
-        <translation type="unfinished"></translation>
+        <translation>Guardar &amp;Rango Seleccionado Como...</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="151"/>
         <source>Save Session Setu&amp;p...</source>
-        <translation type="unfinished"></translation>
+        <translation>Guardar Confi&amp;guración de Sesión...</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="157"/>
         <source>&amp;Export</source>
-        <translation type="unfinished"></translation>
+        <translation>&amp;Exporta</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="163"/>
         <source>&amp;Import</source>
-        <translation type="unfinished"></translation>
+        <translation>&amp;Importa</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="167"/>
         <source>&amp;Connect to Device...</source>
-        <translation type="unfinished"></translation>
+        <translation>&amp;Conecta a Dispositivo...</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="228"/>
         <source>Add protocol decoder</source>
-        <translation type="unfinished"></translation>
+        <translation>Agregar decodificador de protocolo</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="244"/>
         <source>Configure Device</source>
-        <translation type="unfinished"></translation>
+        <translation>Configura Dispositivo</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="248"/>
         <source>Configure Channels</source>
-        <translation type="unfinished"></translation>
+        <translation>Configura Canales</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="357"/>
         <source>Failed to get sample rate list:</source>
-        <translation type="unfinished"></translation>
+        <translation>Error al obtener la lista de frecuencia de muestreo:</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="420"/>
         <source>Failed to get sample rate:</source>
-        <translation type="unfinished"></translation>
+        <translation>Error al obtener la lista de frecuencia de muestreo:</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="461"/>
         <source>Failed to get sample limit list:</source>
-        <translation type="unfinished"></translation>
+        <translation>Error al obtener la lista de límites de muestra:</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="551"/>
         <source>Failed to configure samplerate:</source>
-        <translation type="unfinished"></translation>
+        <translation>Error al configurar frecuencia de muestreo:</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="578"/>
         <source>Failed to configure sample count:</source>
-        <translation type="unfinished"></translation>
+        <translation>Error al configurar cuenta de muestras:</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="616"/>
         <source>Missing Cursors</source>
-        <translation type="unfinished"></translation>
+        <translation>Cursores Faltantes</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="616"/>
         <source>You need to set the cursors before you can save the data enclosed by them to a session file (e.g. using the Show Cursors button).</source>
-        <translation type="unfinished"></translation>
+        <translation>Debe configurar los cursores antes de poder guardar los datos encerrados en un archivo de sesión (por ejemplo, usando el botón Mostrar Cursores).</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="634"/>
         <source>Invalid Range</source>
-        <translation type="unfinished"></translation>
+        <translation>Rango Inválido</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="634"/>
         <source>The cursors don&apos;t define a valid range of samples.</source>
-        <translation type="unfinished"></translation>
+        <translation>Los cursores no definen un rango válido de muestras.</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="646"/>
         <source>%1 files </source>
-        <translation type="unfinished"></translation>
+        <translation>%1 archivos </translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="654"/>
         <location filename="../pv/toolbars/mainbar.cpp" line="699"/>
         <source>All Files</source>
-        <translation type="unfinished"></translation>
+        <translation>Todos los archivos</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="658"/>
         <location filename="../pv/toolbars/mainbar.cpp" line="817"/>
         <source>Save File</source>
-        <translation type="unfinished"></translation>
+        <translation>Guardar Archivo</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="670"/>
         <source>Export %1</source>
-        <translation type="unfinished"></translation>
+        <translation>Exporta %1</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="696"/>
         <source>%1 files</source>
-        <translation type="unfinished"></translation>
+        <translation>%1 archivos</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="707"/>
         <source>Import File</source>
-        <translation type="unfinished"></translation>
+        <translation>Importa Archivo</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="716"/>
         <source>Import %1</source>
-        <translation type="unfinished"></translation>
+        <translation>Importa %1</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="789"/>
         <location filename="../pv/toolbars/mainbar.cpp" line="834"/>
         <source>Open File</source>
-        <translation type="unfinished"></translation>
+        <translation>Abrir Archivo</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="789"/>
         <source>sigrok Sessions (*.sr);;All Files (*)</source>
-        <translation type="unfinished"></translation>
+        <translation>Sesiones sigrok (*sr);;Todos los archivos (*)</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="817"/>
         <location filename="../pv/toolbars/mainbar.cpp" line="834"/>
         <source>PulseView Session Setups (*.pvs);;All Files (*)</source>
-        <translation type="unfinished"></translation>
+        <translation>Configurciones de Sesión de PulseView (*.pvs);;Todos los Archivos (*)</translation>
     </message>
     <message>
         <location filename="../pv/toolbars/mainbar.cpp" line="895"/>
         <source>Total sampling time: %1</source>
-        <translation type="unfinished"></translation>
+        <translation>Tiempo de muestreo total: %1</translation>
     </message>
 </context>
 <context>
@@ -1010,50 +1010,50 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
     <message>
         <location filename="../pv/views/decoder_binary/view.cpp" line="83"/>
         <source>Decoder:</source>
-        <translation type="unfinished"></translation>
+        <translation>Decodificador:</translation>
     </message>
     <message>
         <location filename="../pv/views/decoder_binary/view.cpp" line="87"/>
         <source>Show data as</source>
-        <translation type="unfinished"></translation>
+        <translation>Muestra datos como</translation>
     </message>
     <message>
         <location filename="../pv/views/decoder_binary/view.cpp" line="93"/>
         <source>Hexdump</source>
-        <translation type="unfinished"></translation>
+        <translation>Hexdump</translation>
     </message>
     <message>
         <location filename="../pv/views/decoder_binary/view.cpp" line="110"/>
         <source>&amp;Save...</source>
-        <translation type="unfinished"></translation>
+        <translation>&amp;Guardar...</translation>
     </message>
     <message>
         <location filename="../pv/views/decoder_binary/view.cpp" line="258"/>
         <location filename="../pv/views/decoder_binary/view.cpp" line="298"/>
         <source>Save Binary Data</source>
-        <translation type="unfinished"></translation>
+        <translation>Guardar Datos Binarios</translation>
     </message>
     <message>
         <location filename="../pv/views/decoder_binary/view.cpp" line="258"/>
         <source>Binary Data Files (*.bin);;All Files (*)</source>
-        <translation type="unfinished"></translation>
+        <translation>Archivos de Datos Binarios (*.txt);;Todos los archivos (*)</translation>
     </message>
     <message>
         <location filename="../pv/views/decoder_binary/view.cpp" line="277"/>
         <location filename="../pv/views/decoder_binary/view.cpp" line="329"/>
         <source>Error</source>
-        <translation type="unfinished"></translation>
+        <translation>Error</translation>
     </message>
     <message>
         <location filename="../pv/views/decoder_binary/view.cpp" line="277"/>
         <location filename="../pv/views/decoder_binary/view.cpp" line="329"/>
         <source>File %1 could not be written to.</source>
-        <translation type="unfinished"></translation>
+        <translation>No se pudo escribir en el archivo%1.</translation>
     </message>
     <message>
         <location filename="../pv/views/decoder_binary/view.cpp" line="298"/>
         <source>Hex Dumps (*.txt);;All Files (*)</source>
-        <translation type="unfinished"></translation>
+        <translation>Hex Dumps (*.txt);;Todos los archivos (*)</translation>
     </message>
 </context>
 <context>
@@ -1061,82 +1061,82 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="988"/>
         <source>Number of pos vertical divs</source>
-        <translation type="unfinished"></translation>
+        <translation>Número de divisiones verticales pos</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="995"/>
         <source>Number of neg vertical divs</source>
-        <translation type="unfinished"></translation>
+        <translation>Número de divisiones verticales neg</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="1000"/>
         <source> pixels</source>
-        <translation type="unfinished"></translation>
+        <translation> píxeles</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="1004"/>
         <source>Div height</source>
-        <translation type="unfinished"></translation>
+        <translation>Altura de div</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="1021"/>
         <source>V/div</source>
-        <translation type="unfinished"></translation>
+        <translation>V/div</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="1025"/>
         <source>Vertical resolution</source>
-        <translation type="unfinished"></translation>
+        <translation>Resolución vertical</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="1034"/>
         <source>Autoranging</source>
-        <translation type="unfinished"></translation>
+        <translation>Autorango</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="1039"/>
         <source>none</source>
-        <translation type="unfinished"></translation>
+        <translation>ninguna</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="1041"/>
         <source>to logic via threshold</source>
-        <translation type="unfinished"></translation>
+        <translation>a nivel lógico a partir de umbral</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="1043"/>
         <source>to logic via schmitt-trigger</source>
-        <translation type="unfinished"></translation>
+        <translation>a nivel lógico a partir de schmitt trigger</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="1049"/>
         <source>Conversion</source>
-        <translation type="unfinished"></translation>
+        <translation>Conversión</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="1058"/>
         <source>Conversion threshold(s)</source>
-        <translation type="unfinished"></translation>
+        <translation>Umbral(es) de conversión</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="1068"/>
         <source>analog</source>
-        <translation type="unfinished"></translation>
+        <translation>análogo</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="1069"/>
         <source>converted</source>
-        <translation type="unfinished"></translation>
+        <translation>convertida</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="1070"/>
         <source>analog+converted</source>
-        <translation type="unfinished"></translation>
+        <translation>Analógico+convertido</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/analogsignal.cpp" line="1075"/>
         <source>Show traces for</source>
-        <translation type="unfinished"></translation>
+        <translation>Mostrar trazos para</translation>
     </message>
 </context>
 <context>
@@ -1170,118 +1170,118 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="448"/>
         <source>&lt;p&gt;&lt;i&gt;No decoders in the stack&lt;/i&gt;&lt;/p&gt;</source>
-        <translation type="unfinished"></translation>
+        <translation>&lt;p&gt;&lt;i&gt;No hay decodificadores en el stack.&lt;/i&gt;&lt;/p&gt;</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="459"/>
         <source>&lt;i&gt;* Required channels&lt;/i&gt;</source>
-        <translation type="unfinished"></translation>
+        <translation>&lt;i&gt;* Canales requeridos&lt;/i&gt;</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="463"/>
         <source>Stack Decoder</source>
-        <translation type="unfinished"></translation>
+        <translation>Decodificadores</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="464"/>
         <source>Stack a higher-level decoder on top of this one</source>
-        <translation type="unfinished"></translation>
+        <translation>Apilar un decodificador de nivel superior encima de este</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="478"/>
         <source>Delete</source>
-        <translation type="unfinished"></translation>
+        <translation>Eliminar</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="520"/>
         <source>Resume decoding</source>
-        <translation type="unfinished"></translation>
+        <translation>Reanudar decodificación</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="527"/>
         <source>Pause decoding</source>
-        <translation type="unfinished"></translation>
+        <translation>Pausar decodificación</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="535"/>
         <source>Copy annotation text to clipboard</source>
-        <translation type="unfinished"></translation>
+        <translation>Copiar texto de anotación al clipboard</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="544"/>
         <source>Export all annotations</source>
-        <translation type="unfinished"></translation>
+        <translation>Exportar todas las anotaciones</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="551"/>
         <source>Export all annotations for this row</source>
-        <translation type="unfinished"></translation>
+        <translation>Exportar todas las anotaciones para esta fila</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="560"/>
         <source>Export all annotations, starting here</source>
-        <translation type="unfinished"></translation>
+        <translation>Exportar todas las anotaciones, comenzando aquí</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="567"/>
         <source>Export annotations for this row, starting here</source>
-        <translation type="unfinished"></translation>
+        <translation>Exportar todas las anotaciones para esta fila, comenzando aquí</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="576"/>
         <source>Export all annotations within cursor range</source>
-        <translation type="unfinished"></translation>
+        <translation>Exportar todas las anotaciones dentro del rango del cursor</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="583"/>
         <source>Export annotations for this row within cursor range</source>
-        <translation type="unfinished"></translation>
+        <translation>Exportar todas las anotaciones para esta fila dentro del rango del cursor</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="1100"/>
         <source>%1:
 %2</source>
-        <translation type="unfinished"></translation>
+        <translation>%1\n%2</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="1144"/>
         <source>&lt;b&gt;%1&lt;/b&gt; (%2) %3</source>
-        <translation type="unfinished"></translation>
+        <translation>&lt;b&gt;%1&lt;/b&gt; (%2) %3</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="1214"/>
         <source>Export annotations</source>
-        <translation type="unfinished"></translation>
+        <translation>Exportar anotaciones</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="1214"/>
         <source>Text Files (*.txt);;All Files (*)</source>
-        <translation type="unfinished"></translation>
+        <translation>Archivos de texto (*.txt *.log);;Todos los archivos (*)</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="1279"/>
         <source>Error</source>
-        <translation type="unfinished"></translation>
+        <translation>Error</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="1279"/>
         <source>File %1 could not be written to.</source>
-        <translation type="unfinished"></translation>
+        <translation>No se pudo escribir en el archivo%1.</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="1332"/>
         <source>Show this row</source>
-        <translation type="unfinished"></translation>
+        <translation>Muestra esta fila</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="1343"/>
         <source>Show All</source>
-        <translation type="unfinished"></translation>
+        <translation>Muestra todo</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/decodetrace.cpp" line="1351"/>
         <source>Hide All</source>
-        <translation type="unfinished"></translation>
+        <translation>Oculta todo</translation>
     </message>
 </context>
 <context>
@@ -1289,17 +1289,17 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
     <message>
         <location filename="../pv/views/trace/flag.cpp" line="132"/>
         <source>Text</source>
-        <translation type="unfinished"></translation>
+        <translation>Texto</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/flag.cpp" line="141"/>
         <source>Delete</source>
-        <translation type="unfinished"></translation>
+        <translation>Eliminar</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/flag.cpp" line="146"/>
         <source>Disable snapping</source>
-        <translation type="unfinished"></translation>
+        <translation>Deshabilita snapping</translation>
     </message>
 </context>
 <context>
@@ -1315,47 +1315,47 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
     <message>
         <location filename="../pv/views/trace/logicsignal.cpp" line="451"/>
         <source>No trigger</source>
-        <translation type="unfinished"></translation>
+        <translation>Sin trigger</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/logicsignal.cpp" line="456"/>
         <source>Trigger on rising edge</source>
-        <translation type="unfinished"></translation>
+        <translation>Trigger en flanco de subida</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/logicsignal.cpp" line="461"/>
         <source>Trigger on high level</source>
-        <translation type="unfinished"></translation>
+        <translation>Trigger en nivel alto</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/logicsignal.cpp" line="466"/>
         <source>Trigger on falling edge</source>
-        <translation type="unfinished"></translation>
+        <translation>Trigger en flanco de bajada</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/logicsignal.cpp" line="471"/>
         <source>Trigger on low level</source>
-        <translation type="unfinished"></translation>
+        <translation>Trigger en nivel bajo</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/logicsignal.cpp" line="476"/>
         <source>Trigger on rising or falling edge</source>
-        <translation type="unfinished"></translation>
+        <translation>Trigger en flanco de subida o bajada</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/logicsignal.cpp" line="563"/>
         <source> pixels</source>
-        <translation type="unfinished"></translation>
+        <translation> pixeles</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/logicsignal.cpp" line="567"/>
         <source>Trace height</source>
-        <translation type="unfinished"></translation>
+        <translation>Altura del trazo</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/logicsignal.cpp" line="591"/>
         <source>Trigger</source>
-        <translation type="unfinished"></translation>
+        <translation>Trigger</translation>
     </message>
 </context>
 <context>
@@ -1363,27 +1363,27 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
     <message>
         <location filename="../pv/views/trace/ruler.cpp" line="153"/>
         <source>Create marker here</source>
-        <translation type="unfinished"></translation>
+        <translation>Crear marcador aqui</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/ruler.cpp" line="157"/>
         <source>Set as zero point</source>
-        <translation type="unfinished"></translation>
+        <translation>Establecer como punto cero</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/ruler.cpp" line="162"/>
         <source>Reset zero point</source>
-        <translation type="unfinished"></translation>
+        <translation>Reiniciar punto cero</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/ruler.cpp" line="175"/>
         <source>Disable mouse hover marker</source>
-        <translation type="unfinished"></translation>
+        <translation>Deshabilitar marcador de desplazamiento del mouse</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/ruler.cpp" line="175"/>
         <source>Enable mouse hover marker</source>
-        <translation type="unfinished"></translation>
+        <translation>Habilitar marcador de desplazamiento del mouse</translation>
     </message>
 </context>
 <context>
@@ -1404,37 +1404,37 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
     <message>
         <location filename="../pv/views/trace/standardbar.cpp" line="54"/>
         <source>Zoom &amp;In</source>
-        <translation type="unfinished"></translation>
+        <translation>&amp;Acercar</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/standardbar.cpp" line="62"/>
         <source>Zoom &amp;Out</source>
-        <translation type="unfinished"></translation>
+        <translation>A&amp;lejar</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/standardbar.cpp" line="70"/>
         <source>Zoom to &amp;Fit</source>
-        <translation type="unfinished"></translation>
+        <translation>Hacer Zoom para &amp;Encajar</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/standardbar.cpp" line="82"/>
         <source>Show &amp;Cursors</source>
-        <translation type="unfinished"></translation>
+        <translation>Mostrar &amp;Cursores</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/standardbar.cpp" line="85"/>
         <source>Display last segment only</source>
-        <translation type="unfinished"></translation>
+        <translation>Mostrar solo el último segmento</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/standardbar.cpp" line="90"/>
         <source>Display last complete segment only</source>
-        <translation type="unfinished"></translation>
+        <translation>Mostrar solo el último segmento completo</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/standardbar.cpp" line="95"/>
         <source>Display a single segment</source>
-        <translation type="unfinished"></translation>
+        <translation>Mostrar solo un segmento</translation>
     </message>
 </context>
 <context>
@@ -1442,7 +1442,7 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
     <message>
         <location filename="../pv/views/trace/timemarker.cpp" line="191"/>
         <source>Time</source>
-        <translation type="unfinished"></translation>
+        <translation>Tiempo</translation>
     </message>
 </context>
 <context>
@@ -1450,17 +1450,17 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
     <message>
         <location filename="../pv/views/trace/trace.cpp" line="206"/>
         <source>Create marker here</source>
-        <translation type="unfinished"></translation>
+        <translation>Crear marcador aqui</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/trace.cpp" line="315"/>
         <source>Color</source>
-        <translation type="unfinished"></translation>
+        <translation>Color</translation>
     </message>
     <message>
         <location filename="../pv/views/trace/trace.cpp" line="380"/>
         <source>Name</source>
-        <translation type="unfinished"></translation>
+        <translation>Nombre</translation>
     </message>
 </context>
 <context>
@@ -1468,7 +1468,7 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
     <message>
         <location filename="../pv/views/trace/tracegroup.cpp" line="140"/>
         <source>Ungroup</source>
-        <translation type="unfinished"></translation>
+        <translation>Desagrupar</translation>
     </message>
 </context>
 <context>
@@ -1476,12 +1476,12 @@ Please keep in mind that PulseView may need a restart to display correctly.</sou
     <message>
         <location filename="../pv/widgets/decodergroupbox.cpp" line="48"/>
         <source>Show/hide this decoder trace</source>
-        <translation type="unfinished"></translation>
+        <translation>Mostrar / ocultar este trazo de decodificador</translation>
     </message>
     <message>
         <location filename="../pv/widgets/decodergroupbox.cpp" line="58"/>
         <source>Delete this decoder trace</source>
-        <translation type="unfinished"></translation>
+        <translation>Eliminar este trazo de decodificador</translation>
     </message>
 </context>
 <context>