--- /dev/null
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2012-2014 Uwe Hermann <uwe@hermann-uwe.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+# Normal commands (CMD)
+# Unlisted items are 'Reserved' as per SD spec. The 'Unknown' items don't
+# seem to be mentioned in the spec, but aren't marked as reserved either.
+cmd_names = {
+ 0: 'GO_IDLE_STATE',
+ 1: 'SEND_OP_COND', # Reserved in SD mode
+ 2: 'ALL_SEND_CID',
+ 3: 'SEND_RELATIVE_ADDR',
+ 4: 'SET_DSR',
+ 5: 'IO_SEND_OP_COND', # SDIO-only
+ 6: 'SWITCH_FUNC', # New since spec 1.10
+ 7: 'SELECT/DESELECT_CARD',
+ 8: 'SEND_IF_COND',
+ 9: 'SEND_CSD',
+ 10: 'SEND_CID',
+ 11: 'VOLTAGE_SWITCH',
+ 12: 'STOP_TRANSMISSION',
+ 13: 'SEND_STATUS',
+ # 14: Reserved
+ 15: 'GO_INACTIVE_STATE',
+ 16: 'SET_BLOCKLEN',
+ 17: 'READ_SINGLE_BLOCK',
+ 18: 'READ_MULTIPLE_BLOCK',
+ 19: 'SEND_TUNING_BLOCK',
+ 20: 'SPEED_CLASS_CONTROL',
+ # 21-22: Reserved
+ 23: 'SET_BLOCK_COUNT',
+ 24: 'WRITE_BLOCK',
+ 25: 'WRITE_MULTIPLE_BLOCK',
+ 26: 'Reserved for manufacturer',
+ 27: 'PROGRAM_CSD',
+ 28: 'SET_WRITE_PROT',
+ 29: 'CLR_WRITE_PROT',
+ 30: 'SEND_WRITE_PROT',
+ # 31: Reserved
+ 32: 'ERASE_WR_BLK_START', # SPI mode: ERASE_WR_BLK_START_ADDR
+ 33: 'ERASE_WR_BLK_END', # SPI mode: ERASE_WR_BLK_END_ADDR
+ 34: 'Reserved for CMD6', # New since spec 1.10
+ 35: 'Reserved for CMD6', # New since spec 1.10
+ 36: 'Reserved for CMD6', # New since spec 1.10
+ 37: 'Reserved for CMD6', # New since spec 1.10
+ 38: 'ERASE',
+ # 39: Reserved
+ 40: 'Reserved for security specification',
+ # 41: Reserved
+ 42: 'LOCK_UNLOCK',
+ # 43-49: Reserved
+ 50: 'Reserved for CMD6', # New since spec 1.10
+ # 51: Reserved
+ 52: 'IO_RW_DIRECT', # SDIO-only
+ 53: 'IO_RW_EXTENDED', # SDIO-only
+ 54: 'Unknown',
+ 55: 'APP_CMD',
+ 56: 'GEN_CMD',
+ 57: 'Reserved for CMD6', # New since spec 1.10
+ 58: 'READ_OCR', # Reserved in SD mode
+ 59: 'CRC_ON_OFF', # Reserved in SD mode
+ 60: 'Reserved for manufacturer',
+ 61: 'Reserved for manufacturer',
+ 62: 'Reserved for manufacturer',
+ 63: 'Reserved for manufacturer',
+}
+
+# Application-specific commands (ACMD)
+# Unlisted items are 'Reserved' as per SD spec. The 'Unknown' items don't
+# seem to be mentioned in the spec, but aren't marked as reserved either.
+acmd_names = {
+ # 1-5: Reserved
+ 6: 'SET_BUS_WIDTH',
+ # 7-12: Reserved
+ 13: 'SD_STATUS',
+ 14: 'Reserved for Security Application',
+ 15: 'Reserved for Security Application',
+ 16: 'Reserved for Security Application',
+ # 17: Reserved
+ 18: 'Reserved for SD security applications',
+ # 19-21: Reserved
+ 22: 'SEND_NUM_WR_BLOCKS',
+ 23: 'SET_WR_BLK_ERASE_COUNT',
+ # 24: Reserved
+ 25: 'Reserved for SD security applications',
+ 26: 'Reserved for SD security applications',
+ 27: 'Reserved for security specification',
+ 28: 'Reserved for security specification',
+ # 29: Reserved
+ 30: 'Reserved for security specification',
+ 31: 'Reserved for security specification',
+ 32: 'Reserved for security specification',
+ 33: 'Reserved for security specification',
+ 34: 'Reserved for security specification',
+ 35: 'Reserved for security specification',
+ # 36-37: Reserved
+ 38: 'Reserved for SD security applications',
+ # 39-40: Reserved
+ 41: 'SD_SEND_OP_COND',
+ 42: 'SET_CLR_CARD_DETECT',
+ 43: 'Reserved for SD security applications',
+ 44: 'Reserved for SD security applications',
+ 45: 'Reserved for SD security applications',
+ 46: 'Reserved for SD security applications',
+ 47: 'Reserved for SD security applications',
+ 48: 'Reserved for SD security applications',
+ 49: 'Reserved for SD security applications',
+ 50: 'Unknown',
+ 51: 'SEND_SCR',
+ 52: 'Reserved for security specification',
+ 53: 'Reserved for security specification',
+ 54: 'Reserved for security specification',
+ 55: 'Non-existant', # Doesn't exist (equivalent to CMD55)
+ 56: 'Reserved for security specification',
+ 57: 'Reserved for security specification',
+ 58: 'Reserved for security specification',
+ 59: 'Reserved for security specification',
+ 60: 'Unknown',
+ 61: 'Unknown',
+ 62: 'Unknown',
+ 63: 'Unknown',
+}
+
+accepted_voltages = {
+ 0b0001: '2.7-3.6V',
+ 0b0010: 'reserved for low voltage range',
+ 0b0100: 'reserved',
+ 0b1000: 'reserved',
+ # All other values: "not defined".
+}
+
+card_status = {
+ 0: 'Reserved for manufacturer test mode',
+ 1: 'Reserved for manufacturer test mode',
+ 2: 'Reserved for application specific commands',
+ 3: 'AKE_SEQ_ERROR',
+ 4: 'Reserved for SDIO card',
+ 5: 'APP_CMD',
+ 6: 'Unknown',
+ 7: 'Unknown',
+ 8: 'READY_FOR_DATA',
+ 9: 'CURRENT_STATE', # CURRENT_STATE is a 4-bit value (decimal: 0..15).
+ 10: 'CURRENT_STATE',
+ 11: 'CURRENT_STATE',
+ 12: 'CURRENT_STATE',
+ 13: 'ERASE_RESET',
+ 14: 'CARD_ECC_DISABLED',
+ 15: 'WP_ERASE_SKIP',
+ 16: 'CSD_OVERWRITE',
+ 17: 'Reserved for DEFERRED_RESPONSE', # See eSD addendum
+ 18: 'Reserved',
+ 19: 'ERROR',
+ 20: 'CC_ERROR',
+ 21: 'CARD_ECC_FAILED',
+ 22: 'ILLEGAL_COMMAND',
+ 23: 'COM_CRC_ERROR',
+ 24: 'LOCK_UNLOCK_FAILED',
+ 25: 'CARD_IS_LOCKED',
+ 26: 'WP_VIOLATION',
+ 27: 'ERASE_PARAM',
+ 28: 'ERASE_SEQ_ERROR',
+ 29: 'BLOCK_LEN_ERROR',
+ 30: 'ADDRESS_ERROR',
+ 31: 'OUT_OF_RANGE',
+}
+
+sd_status = {
+ # 311:0: Reserved for manufacturer
+ # 391:312: Reserved
+}
projects / libsigrokdecode.git / blobdiff