From: Gerhard Sittig <redacted>
Date: Mon, 7 Feb 2022 17:52:20 +0000 (+0100)
Subject: kingst-la2016: add more device types and their EEPROM magic numbers
X-Git-Url: http://sigrok.org/gitweb/?a=commitdiff_plain;h=69320ad31c261df3e191aeb4c87daed299068661;p=libsigrok.git

kingst-la2016: add more device types and their EEPROM magic numbers

Extend the EEPROM content check which identifies device types. Inspect
the full set of four bytes before falling back to weaker checks of two
bytes per copy. Prefer the longest run of consistent data that is found
first. Some devices are said to require inspection of byte[2] in
addition to byte[0], to tell different models apart which share the
same byte[0] value.

This was exclusively tested on LA2016 hardware. The details were derived
from the https://github.com/AlexUg/sigrok implementation (which claims
support for LA1010, the LA50xx details may be untested there as well).
The model database also includes items which are not supported by this
driver implementation, to provide the maximum amount of information to
users which became available during scan.
---

diff --git a/src/hardware/kingst-la2016/protocol.c b/src/hardware/kingst-la2016/protocol.c
index 2b1da858..2378b37d 100644
--- a/src/hardware/kingst-la2016/protocol.c
+++ b/src/hardware/kingst-la2016/protocol.c
@@ -34,20 +34,27 @@
 #define FPGA_FWFILE_FMT	"kingst-%s-fpga.bitstream"
 
 /*
- * List of supported devices and their features. See @ref kingst_model
+ * List of known devices and their features. See @ref kingst_model
  * for the fields' type and meaning. Table is sorted by EEPROM magic.
+ * More specific items need to go first (additional byte[2/6]). Not
+ * all devices are covered by this driver implementation, but telling
+ * users what was detected is considered useful.
  *
- * TODO
- * - Below LA1016 properties were guessed, need verification.
- * - Add LA5016 and LA5032 devices when their EEPROM magic is known.
- * - Does LA1010 fit the driver implementation? Samplerates vary with
- *   channel counts, lack of local sample memory. Most probably not.
+ * TODO Verify the identification of models that were not tested before.
  */
 static const struct kingst_model models[] = {
-	{ 2, "LA2016", "la2016", SR_MHZ(200), 16, 1, },
-	{ 3, "LA1016", "la1016", SR_MHZ(100), 16, 1, },
-	{ 8, "LA2016", "la2016a1", SR_MHZ(200), 16, 1, },
-	{ 9, "LA1016", "la1016a1", SR_MHZ(100), 16, 1, },
+	{  2, 1, "LA2016", "la2016a1", SR_MHZ(200), 16, 1, },
+	{  2, 0, "LA2016", "la2016",   SR_MHZ(200), 16, 1, },
+	{  3, 1, "LA1016", "la1016a1", SR_MHZ(100), 16, 1, },
+	{  3, 0, "LA1016", "la1016",   SR_MHZ(100), 16, 1, },
+	{  4, 0, "LA1010", "la1010a0", SR_MHZ(100), 16, 0, },
+	{  5, 0, "LA5016", "la5016a1", SR_MHZ(500), 16, 2, },
+	{  6, 0, "LA5032", "la5032a0", SR_MHZ(500), 32, 4, },
+	{  7, 0, "LA1010", "la1010a1", SR_MHZ(100), 16, 0, },
+	{  8, 0, "LA2016", "la2016a1", SR_MHZ(200), 16, 1, },
+	{  9, 0, "LA1016", "la1016a1", SR_MHZ(100), 16, 1, },
+	{ 10, 0, "LA1010", "la1010a2", SR_MHZ(100), 16, 0, },
+	{ 65, 0, "LA5016", "la5016a1", SR_MHZ(500), 16, 2, },
 };
 
 /* USB vendor class control requests, executed by the Cypress FX2 MCU. */
@@ -1690,7 +1697,7 @@ SR_PRIV int la2016_identify_device(const struct sr_dev_inst *sdi,
 	const uint8_t *rdptr;
 	uint8_t date_yy, date_mm;
 	uint8_t dinv_yy, dinv_mm;
-	uint8_t magic;
+	uint8_t magic, magic2;
 	size_t model_idx;
 	const struct kingst_model *model;
 	int ret;
@@ -1783,25 +1790,39 @@ SR_PRIV int la2016_identify_device(const struct sr_dev_inst *sdi,
 		sr_spew("EEPROM magic bytes %s.", txt->str);
 		sr_hexdump_free(txt);
 	}
-	if ((buf[0] ^ buf[1]) == 0xff) {
-		/* Primary copy of magic passes complement check. */
+	magic = 0;
+	magic2 = 0;
+	if ((buf[0] ^ buf[1]) == 0xff && (buf[2] ^ buf[3]) == 0xff) {
+		/* Primary copy of magic passes complement check (4 bytes). */
 		magic = buf[0];
-		sr_dbg("Using primary magic, value %d.", (int)magic);
+		magic2 = buf[2];
+		sr_dbg("Using primary magic %hhu (%hhu).", magic, magic2);
+	} else if ((buf[4] ^ buf[5]) == 0xff && (buf[6] ^ buf[7]) == 0xff) {
+		/* Backup copy of magic passes complement check (4 bytes). */
+		magic = buf[4];
+		magic2 = buf[6];
+		sr_dbg("Using secondary magic %hhu (%hhu).", magic, magic2);
+	} else if ((buf[0] ^ buf[1]) == 0xff) {
+		/* Primary copy of magic passes complement check (2 bytes). */
+		magic = buf[0];
+		sr_dbg("Using primary magic %hhu.", magic);
 	} else if ((buf[4] ^ buf[5]) == 0xff) {
-		/* Backup copy of magic passes complement check. */
+		/* Backup copy of magic passes complement check (2 bytes). */
 		magic = buf[4];
-		sr_dbg("Using backup magic, value %d.", (int)magic);
+		sr_dbg("Using secondary magic %hhu.", magic);
 	} else {
 		sr_err("Cannot find consistent device type identification.");
-		magic = 0;
 	}
 	devc->identify_magic = magic;
+	devc->identify_magic2 = magic2;
 
 	devc->model = NULL;
 	for (model_idx = 0; model_idx < ARRAY_SIZE(models); model_idx++) {
 		model = &models[model_idx];
 		if (model->magic != magic)
 			continue;
+		if (model->magic2 && model->magic2 != magic2)
+			continue;
 		devc->model = model;
 		sr_info("Model '%s', %zu channels, max %" PRIu64 "MHz.",
 			model->name, model->channel_count,
@@ -1809,6 +1830,10 @@ SR_PRIV int la2016_identify_device(const struct sr_dev_inst *sdi,
 		devc->fpga_bitstream = g_strdup_printf(FPGA_FWFILE_FMT,
 			model->fpga_stem);
 		sr_info("FPGA bitstream file '%s'.", devc->fpga_bitstream);
+		if (!model->channel_count) {
+			sr_warn("Device lacks logic channels. Not supported.");
+			devc->model = NULL;
+		}
 		break;
 	}
 	if (!devc->model) {
diff --git a/src/hardware/kingst-la2016/protocol.h b/src/hardware/kingst-la2016/protocol.h
index ffdd09a2..3fdf8279 100644
--- a/src/hardware/kingst-la2016/protocol.h
+++ b/src/hardware/kingst-la2016/protocol.h
@@ -107,7 +107,7 @@
 #define LA2016_CONVBUFFER_SIZE	(4 * 1024 * 1024)
 
 struct kingst_model {
-	uint8_t magic;		/* EEPROM magic byte value. */
+	uint8_t magic, magic2;	/* EEPROM magic byte values. */
 	const char *name;	/* User perceived model name. */
 	const char *fpga_stem;	/* Bitstream filename stem. */
 	uint64_t samplerate;	/* Max samplerate in Hz. */
@@ -120,7 +120,7 @@ struct dev_context {
 	char *mcu_firmware;
 	char *fpga_bitstream;
 	uint64_t fw_uploaded; /* Timestamp of most recent FW upload. */
-	uint8_t identify_magic;
+	uint8_t identify_magic, identify_magic2;
 	const struct kingst_model *model;
 	struct sr_channel_group *cg_logic, *cg_pwm;