From: Russ Dill Date: Mon, 30 Dec 2013 15:12:49 +0000 (-0800) Subject: zeroplus: Major rework of sample buffer processing X-Git-Tag: libsigrok-0.3.0~341 X-Git-Url: http://sigrok.org/gitweb/?a=commitdiff_plain;h=42ceb77726b6314fc999cf3664114820eaeddba9;p=libsigrok.git zeroplus: Major rework of sample buffer processing The sample buffer is a still a bit of a mystery, but this should help. The variables in play: triggerbar/ramsize_trigger - These two variables added together indicate how many samples we want captured. ramsize_trigger - triggerbar indicades how many samples must be captured. The ratio between the two is determined by capture ratio. memory_size - This indicates the number of samples in the circular capture buffer. stop_address, now_address, and trigger_address are pointers within the zeroplus that wrap based on this size. now_address - The address that the zeroplus was about to write to when it finished capturing, and now the address that will be read from when reads are done from the capture buffer stop_address - The address that the zeroplus last wrote to when it completed capture. trigger_address - The sample address for which the trigger occured. status - This one is a bit tricky. Some testing has shown that if the zeroplus has captured memory_size or less samples, the STATUS_READY bit is set. For all captures generated with more samples than this, STATUS_READY was cleared. However, boundary conditions are difficult to test and values such as, memory_size + 1 have not been tested. We use this to determine if the capture has wrapped through the sample buffer. More testing is required, but this improves behavior in a number of cases, specifically capturing sample amounts that are not a power of 2 of the sample buffer size. Before, random data was passed to libsigrok. Signed-off-by: Russ Dill --- diff --git a/hardware/zeroplus-logic-cube/api.c b/hardware/zeroplus-logic-cube/api.c index f865a1ab..84f830a6 100644 --- a/hardware/zeroplus-logic-cube/api.c +++ b/hardware/zeroplus-logic-cube/api.c @@ -577,10 +577,21 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi, struct sr_usb_dev_inst *usb; struct sr_datafeed_packet packet; struct sr_datafeed_logic logic; - //uint64_t samples_read; + unsigned int samples_read; int res; unsigned int packet_num, n; unsigned char *buf; + unsigned int status; + unsigned int stop_address; + unsigned int now_address; + unsigned int trigger_address; + unsigned int trigger_offset; + unsigned int triggerbar; + unsigned int ramsize_trigger; + unsigned int memory_size; + unsigned int valid_samples; + unsigned int discard; + int trigger_now; if (sdi->status != SR_ST_ACTIVE) return SR_ERR_DEV_CLOSED; @@ -606,39 +617,138 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi, sr_info("Waiting for data."); analyzer_wait_data(usb->devhdl); - sr_info("Stop address = 0x%x.", - analyzer_get_stop_address(usb->devhdl)); - sr_info("Now address = 0x%x.", - analyzer_get_now_address(usb->devhdl)); - sr_info("Trigger address = 0x%x.", - analyzer_get_trigger_address(usb->devhdl)); + status = analyzer_read_status(usb->devhdl); + stop_address = analyzer_get_stop_address(usb->devhdl); + now_address = analyzer_get_now_address(usb->devhdl); + trigger_address = analyzer_get_trigger_address(usb->devhdl); + + triggerbar = analyzer_get_triggerbar_address(); + ramsize_trigger = analyzer_get_ramsize_trigger_address(); + + n = get_memory_size(devc->memory_size); + memory_size = n / 4; + + sr_info("Status = 0x%x.", status); + sr_info("Stop address = 0x%x.", stop_address); + sr_info("Now address = 0x%x.", now_address); + sr_info("Trigger address = 0x%x.", trigger_address); + sr_info("Triggerbar address = 0x%x.", triggerbar); + sr_info("Ramsize trigger = 0x%x.", ramsize_trigger); + sr_info("Memory size = 0x%x.", memory_size); /* Send header packet to the session bus. */ std_session_send_df_header(cb_data, LOG_PREFIX); + /* Check for empty capture */ + if ((status & STATUS_READY) && !stop_address) { + packet.type = SR_DF_END; + sr_session_send(cb_data, &packet); + return SR_OK; + } + if (!(buf = g_try_malloc(PACKET_SIZE))) { sr_err("Packet buffer malloc failed."); return SR_ERR_MALLOC; } - //samples_read = 0; + /* Check if the trigger is in the samples we are throwing away */ + trigger_now = now_address == trigger_address || + ((now_address + 1) % memory_size) == trigger_address; + + /* + * STATUS_READY doesn't clear until now_address advances past + * addr 0, but for our logic, clear it in that case + */ + if (!now_address) + status &= ~STATUS_READY; + analyzer_read_start(usb->devhdl); + + /* Calculate how much data to discard */ + discard = 0; + if (status & STATUS_READY) { + /* + * We haven't wrapped around, we need to throw away data from + * our current position to the end of the buffer. + * Additionally, the first two samples captured are always + * bogus. + */ + discard += memory_size - now_address + 2; + now_address = 2; + } + + /* If we have more samples than we need, discard them */ + valid_samples = (stop_address - now_address) % memory_size; + if (valid_samples > ramsize_trigger + triggerbar) { + discard += valid_samples - (ramsize_trigger + triggerbar); + now_address += valid_samples - (ramsize_trigger + triggerbar); + } + + sr_info("Need to discard %d samples.", discard); + + /* Calculate how far in the trigger is */ + if (trigger_now) + trigger_offset = 0; + else + trigger_offset = (trigger_address - now_address) % memory_size; + + /* Recalculate the number of samples available */ + valid_samples = (stop_address - now_address) % memory_size; + /* Send the incoming transfer to the session bus. */ - n = get_memory_size(devc->memory_size); - if (devc->max_sample_depth * 4 < n) - n = devc->max_sample_depth * 4; + samples_read = 0; for (packet_num = 0; packet_num < n / PACKET_SIZE; packet_num++) { + unsigned int len; + unsigned int buf_offset; + res = analyzer_read_data(usb->devhdl, buf, PACKET_SIZE); sr_info("Tried to read %d bytes, actually read %d bytes.", PACKET_SIZE, res); + if (discard >= PACKET_SIZE / 4) { + discard -= PACKET_SIZE / 4; + continue; + } + + len = PACKET_SIZE - discard * 4; + buf_offset = discard * 4; + discard = 0; + + /* Check if we've read all the samples */ + if (samples_read + len / 4 >= valid_samples) + len = (valid_samples - samples_read) * 4; + if (!len) + break; + + if (samples_read < trigger_offset && + samples_read + len / 4 > trigger_offset) { + /* Send out samples remaining before trigger */ + packet.type = SR_DF_LOGIC; + packet.payload = &logic; + logic.length = (trigger_offset - samples_read) * 4; + logic.unitsize = 4; + logic.data = buf + buf_offset; + sr_session_send(cb_data, &packet); + len -= logic.length; + samples_read += logic.length / 4; + buf_offset += logic.length; + } + + if (samples_read == trigger_offset) { + /* Send out trigger */ + packet.type = SR_DF_TRIGGER; + packet.payload = NULL; + sr_session_send(cb_data, &packet); + } + + /* Send out data (or data after trigger) */ packet.type = SR_DF_LOGIC; packet.payload = &logic; - logic.length = PACKET_SIZE; + logic.length = len; logic.unitsize = 4; - logic.data = buf; + logic.data = buf + buf_offset; sr_session_send(cb_data, &packet); - //samples_read += res / 4; + samples_read += len / 4; } analyzer_read_stop(usb->devhdl); g_free(buf);