X-Git-Url: http://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fhardware%2Fserial-dmm%2Fapi.c;h=99b2a717672da9e50ebff03fe7d713d95c6dcaf5;hb=f778bf02eaf0d7fa7ccb91a0da8a68233f1fb79a;hp=a9f9cff81fcac132c498d1112317c27a7e052eae;hpb=d5b1b76d65c446bed0dbabdccd66e51d8cdc8298;p=libsigrok.git

diff --git a/src/hardware/serial-dmm/api.c b/src/hardware/serial-dmm/api.c
index a9f9cff8..99b2a717 100644
--- a/src/hardware/serial-dmm/api.c
+++ b/src/hardware/serial-dmm/api.c
@@ -144,9 +144,6 @@ static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sd
 
 	(void)cg;
 
-	if (sdi->status != SR_ST_ACTIVE)
-		return SR_ERR_DEV_CLOSED;
-
 	devc = sdi->priv;
 
 	return sr_sw_limits_config_set(&devc->limits, key, data);
@@ -179,9 +176,6 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi)
 	struct dev_context *devc;
 	struct sr_serial_dev_inst *serial;
 
-	if (sdi->status != SR_ST_ACTIVE)
-		return SR_ERR_DEV_CLOSED;
-
 	devc = sdi->priv;
 
 	sr_sw_limits_acquisition_start(&devc->limits);
@@ -206,6 +200,7 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi)
 			.cleanup = std_cleanup, \
 			.scan = scan, \
 			.dev_list = std_dev_list, \
+			.dev_clear = std_dev_clear, \
 			.config_get = NULL, \
 			.config_set = config_set, \
 			.config_list = config_list, \
@@ -232,6 +227,13 @@ SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers,
 	 * Fold marks {{{ }}} with matching braces were added, to further
 	 * speed up navigation in the long list.
 	 */
+	/* asycii based meters {{{ */
+	DMM(
+		"metrix-mx56c", asycii, "Metrix", "MX56C",
+		"2400/8n1", 2400, ASYCII_PACKET_SIZE, 0, 0, NULL,
+		sr_asycii_packet_valid, sr_asycii_parse, NULL
+	),
+	/* }}} */
 	/* bm25x based meters {{{ */
 	DMM(
 		"brymen-bm25x", bm25x,
@@ -244,7 +246,7 @@ SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers,
 	/* dtm0660 based meters {{{ */
 	DMM(
 		"peaktech-3415", dtm0660,
-		"Peaktech", "3415", "2400/8n1/rts=0/dtr=1",
+		"PeakTech", "3415", "2400/8n1/rts=0/dtr=1",
 		2400, DTM0660_PACKET_SIZE, 0, 0, NULL,
 		sr_dtm0660_packet_valid, sr_dtm0660_parse, NULL
 	),
@@ -268,6 +270,9 @@ SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers,
 	 * "out" by .15%, and so is well within the typical 1% margin
 	 * that is considered acceptable in UART communication, and thus
 	 * should not cause an issue.
+	 *
+	 * However, using 19230 as baudrate here will not work, as most DMM
+	 * cables do not support that baudrate!
 	 */
 	DMM(
 		"tenma-72-7750-ser", es519xx,
@@ -315,7 +320,7 @@ SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers,
 	),
 	DMM(
 		"peaktech-3330", fs9721,
-		"Peaktech", "3330", "2400/8n1/dtr=1", 2400,
+		"PeakTech", "3330", "2400/8n1/dtr=1", 2400,
 		FS9721_PACKET_SIZE, 0, 0, NULL,
 		sr_fs9721_packet_valid, sr_fs9721_parse,
 		sr_fs9721_01_10_temp_f_c
@@ -385,6 +390,12 @@ SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers,
 	),
 	/* }}} */
 	/* fs9922 based meters {{{ */
+	DMM(
+		"sparkfun-70c", fs9922,
+		"SparkFun", "70C", "2400/8n1/rts=0/dtr=1",
+		2400, FS9922_PACKET_SIZE, 0, 0, NULL,
+		sr_fs9922_packet_valid, sr_fs9922_parse, NULL
+	),
 	DMM(
 		"uni-t-ut61b-ser", fs9922,
 		"UNI-T", "UT61B (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
@@ -416,14 +427,16 @@ SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers,
 		&sr_fs9922_z1_diode
 	),
 	/* }}} */
-	/* metex14 based meters {{{ */
+	/* m2110 based meters {{{ */
 	DMM(
-		"bbcgm-2010", metex14,
+		"bbcgm-2010", m2110,
 		"BBC Goertz Metrawatt", "M2110", "1200/7n2", 1200,
 		BBCGM_M2110_PACKET_SIZE, 0, 0, NULL,
 		sr_m2110_packet_valid, sr_m2110_parse,
 		NULL
 	),
+	/* }}} */
+	/* metex14 based meters {{{ */
 	DMM(
 		"mastech-mas345", metex14,
 		"MASTECH", "MAS345", "600/7n2/rts=0/dtr=1", 600,
@@ -454,7 +467,7 @@ SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers,
 	),
 	DMM(
 		"peaktech-3410", metex14,
-		"Peaktech", "3410", "600/7n2/rts=0/dtr=1", 600,
+		"PeakTech", "3410", "600/7n2/rts=0/dtr=1", 600,
 		METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
 		sr_metex14_packet_valid, sr_metex14_parse,
 		NULL