X-Git-Url: http://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fhardware%2Fscpi-pps%2Fprofiles.c;h=75be9efdf525c5d08a0eecdb0ea3d7d0e543e12d;hb=eac48b34917cf19c2b5ba52ccea85ec94bb5830f;hp=b645a9a356074c27860f3783af3e7361b690919d;hpb=5281993e0ad0cd2dcb4e0d17aa399db91f500ba0;p=libsigrok.git
diff --git a/src/hardware/scpi-pps/profiles.c b/src/hardware/scpi-pps/profiles.c
index b645a9a3..75be9efd 100644
--- a/src/hardware/scpi-pps/profiles.c
+++ b/src/hardware/scpi-pps/profiles.c
@@ -19,39 +19,19 @@
* along with this program. If not, see .
*/
+#include
#include
#include
#include "protocol.h"
#define CH_IDX(x) (1 << x)
-#define FREQ_DC_ONLY {0, 0, 0}
-
-static const char *pps_vendors[][2] = {
- { "RIGOL TECHNOLOGIES", "Rigol" },
- { "HEWLETT-PACKARD", "HP" },
- { "PHILIPS", "Philips" },
- { "CHROMA", "Chroma" },
- { "Chroma ATE", "Chroma" },
- { "Agilent Technologies", "Agilent" },
-};
-
-SR_PRIV const char *get_vendor(const char *raw_vendor)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(pps_vendors); i++) {
- if (!strcasecmp(raw_vendor, pps_vendors[i][0]))
- return pps_vendors[i][1];
- }
-
- return raw_vendor;
-}
+#define FREQ_DC_ONLY {0, 0, 0, 0, 0}
static const uint32_t devopts_none[] = { };
/* Agilent/Keysight N5700A series */
static const uint32_t agilent_n5700a_devopts[] = {
- SR_CONF_CONTINUOUS | SR_CONF_SET,
+ SR_CONF_CONTINUOUS,
};
static const uint32_t agilent_n5700a_devopts_cg[] = {
@@ -64,12 +44,16 @@ static const uint32_t agilent_n5700a_devopts_cg[] = {
SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
};
+static const struct channel_group_spec agilent_n5700a_cg[] = {
+ { "1", CH_IDX(0), PPS_OVP | PPS_OCP },
+};
+
static const struct channel_spec agilent_n5767a_ch[] = {
- { "1", { 0, 60, 0.0001 }, { 0, 25, 0.1 }, FREQ_DC_ONLY },
+ { "1", { 0, 60, 0.0072, 3, 4 }, { 0, 25, 0.003, 3, 4 }, { 0, 1500 }, FREQ_DC_ONLY },
};
-static const struct channel_group_spec agilent_n5767a_cg[] = {
- { "1", CH_IDX(0), PPS_OVP | PPS_OCP },
+static const struct channel_spec agilent_n5763a_ch[] = {
+ { "1", { 0, 12.5, 0.0015, 3, 4 }, { 0, 120, 0.0144, 3, 4 }, { 0, 1500 }, FREQ_DC_ONLY },
};
/*
@@ -96,11 +80,12 @@ static const struct scpi_command agilent_n5700a_cmd[] = {
/* Current limit (CC mode) and OCP are set using the same command. */
{ SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR?" },
{ SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR %.6f" },
+ ALL_ZERO
};
/* Chroma 61600 series AC source */
static const uint32_t chroma_61604_devopts[] = {
- SR_CONF_CONTINUOUS | SR_CONF_SET,
+ SR_CONF_CONTINUOUS,
};
static const uint32_t chroma_61604_devopts_cg[] = {
@@ -115,7 +100,7 @@ static const uint32_t chroma_61604_devopts_cg[] = {
};
static const struct channel_spec chroma_61604_ch[] = {
- { "1", { 0, 300, 0.1 }, { 0, 16, 0.1 }, { 1.0, 1000.0, 0.01 } },
+ { "1", { 0, 300, 0.1, 1, 1 }, { 0, 16, 0.1, 2, 2 }, { 0, 2000, 0, 1, 1 }, { 1.0, 1000.0, 0.01 } },
};
static const struct channel_group_spec chroma_61604_cg[] = {
@@ -141,12 +126,13 @@ static const struct scpi_command chroma_61604_cmd[] = {
/* This is not a current limit mode. It is overcurrent protection. */
{ SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:LIM?" },
{ SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:LIM %.2f" },
+ ALL_ZERO
};
/* Chroma 62000 series DC source */
static const uint32_t chroma_62000_devopts[] = {
- SR_CONF_CONTINUOUS | SR_CONF_SET,
+ SR_CONF_CONTINUOUS,
};
static const uint32_t chroma_62000_devopts_cg[] = {
@@ -159,10 +145,6 @@ static const uint32_t chroma_62000_devopts_cg[] = {
SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
};
-static const struct channel_spec chroma_62024p_80_60_ch[] = {
- { "1", { 0, 80, 0.01 }, { 0, 60, 0.01 }, FREQ_DC_ONLY },
-};
-
static const struct channel_group_spec chroma_62000_cg[] = {
{ "1", CH_IDX(0), PPS_OVP | PPS_OCP },
};
@@ -187,11 +169,61 @@ static const struct scpi_command chroma_62000_cmd[] = {
{ SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:HIGH %.6f" },
{ SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:PROT:HIGH?" },
{ SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:PROT:HIGH %.6f" },
+ ALL_ZERO
};
+static int chroma_62000p_probe_channels(struct sr_dev_inst *sdi,
+ struct sr_scpi_hw_info *hw_info,
+ struct channel_spec **channels, unsigned int *num_channels,
+ struct channel_group_spec **channel_groups,
+ unsigned int *num_channel_groups)
+{
+ unsigned int volts, amps, watts;
+ struct channel_spec *channel;
+
+ (void)sdi;
+
+ sscanf(hw_info->model, "620%uP-%u-%u", &watts, &volts, &s);
+ watts *= 100;
+ sr_dbg("Found device rated for %d V, %d A and %d W", volts, amps, watts);
+
+ if (volts > 600) {
+ sr_err("Probed max voltage of %u V is out of spec.", volts);
+ return SR_ERR_BUG;
+ }
+
+ if (amps > 120) {
+ sr_err("Probed max current of %u A is out of spec.", amps);
+ return SR_ERR_BUG;
+ }
+
+ if (watts > 5000) {
+ sr_err("Probed max power of %u W is out of spec.", watts);
+ return SR_ERR_BUG;
+ }
+
+ channel = g_malloc0(sizeof(struct channel_spec));
+ channel->name = "1";
+ channel->voltage[0] = channel->current[0] = channel->power[0] = 0.0;
+ channel->voltage[1] = (float)volts;
+ channel->current[1] = (float)amps;
+ channel->power[1] = (float)watts;
+ channel->voltage[2] = channel->current[2] = 0.01;
+ channel->voltage[3] = channel->voltage[4] = 3;
+ channel->current[3] = channel->current[4] = 4;
+ *channels = channel;
+ *num_channels = 1;
+
+ *channel_groups = g_malloc(sizeof(struct channel_group_spec));
+ **channel_groups = chroma_62000_cg[0];
+ *num_channel_groups = 1;
+
+ return SR_OK;
+}
+
/* Rigol DP800 series */
static const uint32_t rigol_dp800_devopts[] = {
- SR_CONF_CONTINUOUS | SR_CONF_SET,
+ SR_CONF_CONTINUOUS,
SR_CONF_OVER_TEMPERATURE_PROTECTION | SR_CONF_GET | SR_CONF_SET,
};
@@ -211,20 +243,20 @@ static const uint32_t rigol_dp800_devopts_cg[] = {
};
static const struct channel_spec rigol_dp821a_ch[] = {
- { "1", { 0, 60, 0.001 }, { 0, 1, 0.0001 }, FREQ_DC_ONLY },
- { "2", { 0, 8, 0.001 }, { 0, 10, 0.001 }, FREQ_DC_ONLY },
+ { "1", { 0, 60, 0.001, 3, 3 }, { 0, 1, 0.0001, 4, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY },
+ { "2", { 0, 8, 0.001, 3, 3 }, { 0, 10, 0.001, 3, 3 }, { 0, 80, 0, 3, 3 }, FREQ_DC_ONLY },
};
static const struct channel_spec rigol_dp831_ch[] = {
- { "1", { 0, 8, 0.001 }, { 0, 5, 0.0003 }, FREQ_DC_ONLY },
- { "2", { 0, 30, 0.001 }, { 0, 2, 0.0001 }, FREQ_DC_ONLY },
- { "3", { 0, -30, 0.001 }, { 0, 2, 0.0001 }, FREQ_DC_ONLY },
+ { "1", { 0, 8, 0.001, 3, 4 }, { 0, 5, 0.0003, 3, 4 }, { 0, 40, 0, 3, 4 }, FREQ_DC_ONLY },
+ { "2", { 0, 30, 0.001, 3, 4 }, { 0, 2, 0.0001, 3, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY },
+ { "3", { 0, -30, 0.001, 3, 4 }, { 0, 2, 0.0001, 3, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY },
};
static const struct channel_spec rigol_dp832_ch[] = {
- { "1", { 0, 30, 0.001 }, { 0, 3, 0.001 }, FREQ_DC_ONLY },
- { "2", { 0, 30, 0.001 }, { 0, 3, 0.001 }, FREQ_DC_ONLY },
- { "3", { 0, 5, 0.001 }, { 0, 3, 0.001 }, FREQ_DC_ONLY },
+ { "1", { 0, 30, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY },
+ { "2", { 0, 30, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY },
+ { "3", { 0, 5, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY },
};
static const struct channel_group_spec rigol_dp820_cg[] = {
@@ -271,11 +303,24 @@ static const struct scpi_command rigol_dp800_cmd[] = {
{ SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":OUTP:OCP:QUES?" },
{ SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL?" },
{ SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL %.6f" },
+ ALL_ZERO
};
/* HP 663xx series */
+
+static const uint32_t hp_6630a_devopts[] = {
+ SR_CONF_CONTINUOUS,
+ SR_CONF_ENABLED | SR_CONF_SET,
+ SR_CONF_VOLTAGE | SR_CONF_GET,
+ SR_CONF_CURRENT | SR_CONF_GET,
+ SR_CONF_VOLTAGE_TARGET | SR_CONF_SET | SR_CONF_LIST,
+ SR_CONF_CURRENT_LIMIT | SR_CONF_SET | SR_CONF_LIST,
+ SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_SET,
+ SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_SET,
+};
+
static const uint32_t hp_6632b_devopts[] = {
- SR_CONF_CONTINUOUS | SR_CONF_SET,
+ SR_CONF_CONTINUOUS,
SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
SR_CONF_VOLTAGE | SR_CONF_GET,
SR_CONF_CURRENT | SR_CONF_GET,
@@ -283,14 +328,31 @@ static const uint32_t hp_6632b_devopts[] = {
SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
};
+static const struct channel_spec hp_6633a_ch[] = {
+ { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 2.0475, 0.0005, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY },
+};
+
static const struct channel_spec hp_6632b_ch[] = {
- { "1", { 0, 20.475, 0.005 }, { 0, 5.1188, 0.00132 }, FREQ_DC_ONLY },
+ { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00132, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY },
};
-static const struct channel_group_spec hp_6632b_cg[] = {
+static const struct channel_group_spec hp_663xx_cg[] = {
{ "1", CH_IDX(0), 0 },
};
+static const struct scpi_command hp_6630a_cmd[] = {
+ { SCPI_CMD_SET_OUTPUT_ENABLE, "OUT 1" },
+ { SCPI_CMD_SET_OUTPUT_DISABLE, "OUT 0" },
+ { SCPI_CMD_GET_MEAS_VOLTAGE, "VOUT?" },
+ { SCPI_CMD_GET_MEAS_CURRENT, "IOUT?" },
+ { SCPI_CMD_SET_VOLTAGE_TARGET, "VSET %.4f" },
+ { SCPI_CMD_SET_CURRENT_LIMIT, "ISET %.4f" },
+ { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, "OCP 1" },
+ { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, "OCP 0" },
+ { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "OVSET %.4f" },
+ ALL_ZERO
+};
+
static const struct scpi_command hp_6632b_cmd[] = {
{ SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP:STAT?" },
{ SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP:STAT ON" },
@@ -301,11 +363,12 @@ static const struct scpi_command hp_6632b_cmd[] = {
{ SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" },
{ SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
{ SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
+ ALL_ZERO
};
/* Philips/Fluke PM2800 series */
static const uint32_t philips_pm2800_devopts[] = {
- SR_CONF_CONTINUOUS | SR_CONF_SET,
+ SR_CONF_CONTINUOUS,
};
static const uint32_t philips_pm2800_devopts_cg[] = {
@@ -332,17 +395,18 @@ enum philips_pm2800_modules {
static const struct philips_pm2800_module_spec {
/* Min, max, programming resolution. */
- float voltage[3];
- float current[3];
+ float voltage[5];
+ float current[5];
+ float power[5];
} philips_pm2800_module_specs[] = {
/* Autoranging modules. */
- [PM2800_MOD_30V_10A] = { { 0, 30, 0.0075 }, { 0, 10, 0.0025 } },
- [PM2800_MOD_60V_5A] = { { 0, 60, 0.015 }, { 0, 5, 0.00125 } },
- [PM2800_MOD_60V_10A] = { { 0, 60, 0.015 }, { 0, 10, 0.0025 } },
+ [PM2800_MOD_30V_10A] = { { 0, 30, 0.0075, 2, 4 }, { 0, 10, 0.0025, 2, 4 }, { 0, 60 } },
+ [PM2800_MOD_60V_5A] = { { 0, 60, 0.015, 2, 3 }, { 0, 5, 0.00125, 2, 5 }, { 0, 60 } },
+ [PM2800_MOD_60V_10A] = { { 0, 60, 0.015, 2, 3 }, { 0, 10, 0.0025, 2, 5 }, { 0, 120 } },
/* Linear modules. */
- [PM2800_MOD_8V_15A] = { { 0, 8, 0.002 }, { -15, 15, 0.00375 } },
- [PM2800_MOD_60V_2A] = { { 0, 60, 0.015 }, { -2, 2, 0.0005 } },
- [PM2800_MOD_120V_1A] = { { 0, 120, 0.030 }, { -1, 1, 0.00025 } },
+ [PM2800_MOD_8V_15A] = { { 0, 8, 0.002, 3, 3 }, { -15, 15, 0.00375, 3, 5 }, { 0, 120 } },
+ [PM2800_MOD_60V_2A] = { { 0, 60, 0.015, 2, 3 }, { -2, 2, 0.0005, 3, 4 }, { 0, 120 } },
+ [PM2800_MOD_120V_1A] = { { 0, 120, 0.030, 2, 2 }, { -1, 1, 0.00025, 3, 5 }, { 0, 120 } },
};
static const struct philips_pm2800_model {
@@ -414,11 +478,12 @@ static int philips_pm2800_probe_channels(struct sr_dev_inst *sdi,
for (i = 0; i < num_modules; i++) {
module = model->modules[i];
spec = &philips_pm2800_module_specs[module];
- sr_dbg("output %d: %.0f - %.0fV, %.0f - %.0fA", i + 1,
+ sr_dbg("output %d: %.0f - %.0fV, %.0f - %.0fA, %.0f - %.0fW", i + 1,
spec->voltage[0], spec->voltage[1],
- spec->current[0], spec->current[1]);
+ spec->current[0], spec->current[1],
+ spec->power[0], spec->power[1]);
(*channels)[i].name = (char *)philips_pm2800_names[i];
- memcpy(&((*channels)[i].voltage), spec, sizeof(float) * 6);
+ memcpy(&((*channels)[i].voltage), spec, sizeof(float) * 15);
(*channel_groups)[i].name = (char *)philips_pm2800_names[i];
(*channel_groups)[i].channel_index_mask = 1 << i;
(*channel_groups)[i].features = PPS_OTP | PPS_OVP | PPS_OCP;
@@ -447,16 +512,73 @@ static const struct scpi_command philips_pm2800_cmd[] = {
{ SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":SOUR:CURR:PROT:STAT ON" },
{ SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":SOUR:CURR:PROT:STAT OFF" },
{ SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":SOUR:CURR:PROT:TRIP?" },
+ ALL_ZERO
+};
+
+static const uint32_t rs_hmc8043_devopts[] = {
+ SR_CONF_CONTINUOUS,
+};
+
+static const uint32_t rs_hmc8043_devopts_cg[] = {
+ SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
+ SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
+ SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
+ SR_CONF_VOLTAGE | SR_CONF_GET,
+ SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+ SR_CONF_CURRENT | SR_CONF_GET,
+ SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+ SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
+};
+
+static const struct channel_spec rs_hmc8043_ch[] = {
+ { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY },
+ { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY },
+ { "3", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY },
+};
+
+static const struct channel_group_spec rs_hmc8043_cg[] = {
+ { "1", CH_IDX(0), PPS_OVP },
+ { "2", CH_IDX(1), PPS_OVP },
+ { "3", CH_IDX(2), PPS_OVP },
+};
+
+static const struct scpi_command rs_hmc8043_cmd[] = {
+ { SCPI_CMD_SELECT_CHANNEL, "INST:NSEL %s" },
+ { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" },
+ { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" },
+ { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" },
+ { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" },
+ { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" },
+ { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" },
+ { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" },
+ { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP ON" },
+ { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP OFF" },
+ { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "VOLT:PROT:TRIP?" },
+ { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV?" },
+ { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV %.6f" },
+ { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED, "VOLT:PROT:STAT?" },
+ { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE, "VOLT:PROT:STAT ON" },
+ { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE, "VOLT:PROT:STAT OFF" },
+ ALL_ZERO
};
SR_PRIV const struct scpi_pps pps_profiles[] = {
+ /* Agilent N5763A */
+ { "Agilent", "N5763A", 0,
+ ARRAY_AND_SIZE(agilent_n5700a_devopts),
+ ARRAY_AND_SIZE(agilent_n5700a_devopts_cg),
+ ARRAY_AND_SIZE(agilent_n5763a_ch),
+ ARRAY_AND_SIZE(agilent_n5700a_cg),
+ agilent_n5700a_cmd,
+ .probe_channels = NULL,
+ },
/* Agilent N5767A */
{ "Agilent", "N5767A", 0,
ARRAY_AND_SIZE(agilent_n5700a_devopts),
ARRAY_AND_SIZE(agilent_n5700a_devopts_cg),
ARRAY_AND_SIZE(agilent_n5767a_ch),
- ARRAY_AND_SIZE(agilent_n5767a_cg),
- ARRAY_AND_SIZE(agilent_n5700a_cmd),
+ ARRAY_AND_SIZE(agilent_n5700a_cg),
+ agilent_n5700a_cmd,
.probe_channels = NULL,
},
/* Chroma 61604 */
@@ -465,25 +587,35 @@ SR_PRIV const struct scpi_pps pps_profiles[] = {
ARRAY_AND_SIZE(chroma_61604_devopts_cg),
ARRAY_AND_SIZE(chroma_61604_ch),
ARRAY_AND_SIZE(chroma_61604_cg),
- ARRAY_AND_SIZE(chroma_61604_cmd),
+ chroma_61604_cmd,
.probe_channels = NULL,
},
/* Chroma 62000 series */
- { "Chroma", "62024P-80-60", 0,
+ { "Chroma", "620[0-9]{2}P-[0-9]{2,3}-[0-9]{1,3}", 0,
ARRAY_AND_SIZE(chroma_62000_devopts),
ARRAY_AND_SIZE(chroma_62000_devopts_cg),
- ARRAY_AND_SIZE(chroma_62024p_80_60_ch),
- ARRAY_AND_SIZE(chroma_62000_cg),
- ARRAY_AND_SIZE(chroma_62000_cmd),
+ NULL, 0,
+ NULL, 0,
+ chroma_62000_cmd,
+ .probe_channels = chroma_62000p_probe_channels,
+ },
+ /* HP 6633A */
+ { "HP", "6633A", 0,
+ ARRAY_AND_SIZE(hp_6630a_devopts),
+ ARRAY_AND_SIZE(devopts_none),
+ ARRAY_AND_SIZE(hp_6633a_ch),
+ ARRAY_AND_SIZE(hp_663xx_cg),
+ hp_6630a_cmd,
.probe_channels = NULL,
},
+
/* HP 6632B */
{ "HP", "6632B", 0,
ARRAY_AND_SIZE(hp_6632b_devopts),
ARRAY_AND_SIZE(devopts_none),
ARRAY_AND_SIZE(hp_6632b_ch),
- ARRAY_AND_SIZE(hp_6632b_cg),
- ARRAY_AND_SIZE(hp_6632b_cmd),
+ ARRAY_AND_SIZE(hp_663xx_cg),
+ hp_6632b_cmd,
.probe_channels = NULL,
},
@@ -493,7 +625,7 @@ SR_PRIV const struct scpi_pps pps_profiles[] = {
ARRAY_AND_SIZE(rigol_dp800_devopts_cg),
ARRAY_AND_SIZE(rigol_dp821a_ch),
ARRAY_AND_SIZE(rigol_dp820_cg),
- ARRAY_AND_SIZE(rigol_dp800_cmd),
+ rigol_dp800_cmd,
.probe_channels = NULL,
},
{ "Rigol", "^DP831A$", PPS_OTP,
@@ -501,7 +633,7 @@ SR_PRIV const struct scpi_pps pps_profiles[] = {
ARRAY_AND_SIZE(rigol_dp800_devopts_cg),
ARRAY_AND_SIZE(rigol_dp831_ch),
ARRAY_AND_SIZE(rigol_dp830_cg),
- ARRAY_AND_SIZE(rigol_dp800_cmd),
+ rigol_dp800_cmd,
.probe_channels = NULL,
},
{ "Rigol", "^(DP832|DP832A)$", PPS_OTP,
@@ -509,7 +641,7 @@ SR_PRIV const struct scpi_pps pps_profiles[] = {
ARRAY_AND_SIZE(rigol_dp800_devopts_cg),
ARRAY_AND_SIZE(rigol_dp832_ch),
ARRAY_AND_SIZE(rigol_dp830_cg),
- ARRAY_AND_SIZE(rigol_dp800_cmd),
+ rigol_dp800_cmd,
.probe_channels = NULL,
},
@@ -519,9 +651,19 @@ SR_PRIV const struct scpi_pps pps_profiles[] = {
ARRAY_AND_SIZE(philips_pm2800_devopts_cg),
NULL, 0,
NULL, 0,
- ARRAY_AND_SIZE(philips_pm2800_cmd),
+ philips_pm2800_cmd,
philips_pm2800_probe_channels,
},
+
+ /* Rohde & Schwarz HMC8043 */
+ { "Rohde&Schwarz", "HMC8043", 0,
+ ARRAY_AND_SIZE(rs_hmc8043_devopts),
+ ARRAY_AND_SIZE(rs_hmc8043_devopts_cg),
+ ARRAY_AND_SIZE(rs_hmc8043_ch),
+ ARRAY_AND_SIZE(rs_hmc8043_cg),
+ rs_hmc8043_cmd,
+ .probe_channels = NULL,
+ },
};
SR_PRIV unsigned int num_pps_profiles = ARRAY_SIZE(pps_profiles);