X-Git-Url: http://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fhardware%2Fikalogic-scanaplus%2Fapi.c;h=9f8f2506d41c11acec9876eeed795d9c841fa004;hb=91057d2fc24c0ca058aa08c8ea6ada4eadf05ffd;hp=2105bce130ed937ef4a9da75070a0c2c7f3b750f;hpb=f670835f1fbc03525e995d6970a5495976ab7c1a;p=libsigrok.git

diff --git a/src/hardware/ikalogic-scanaplus/api.c b/src/hardware/ikalogic-scanaplus/api.c
index 2105bce1..9f8f2506 100644
--- a/src/hardware/ikalogic-scanaplus/api.c
+++ b/src/hardware/ikalogic-scanaplus/api.c
@@ -143,7 +143,6 @@ static int dev_open(struct sr_dev_inst *sdi)
 		       ftdi_get_error_string(devc->ftdic));
 		return SR_ERR;
 	}
-	sr_dbg("FTDI chip interface A set successfully.");
 
 	/* Open the device. */
 	ret = ftdi_usb_open_desc(devc->ftdic, USB_VENDOR_ID, USB_DEVICE_ID,
@@ -153,7 +152,6 @@ static int dev_open(struct sr_dev_inst *sdi)
 		       ftdi_get_error_string(devc->ftdic));
 		return SR_ERR;
 	}
-	sr_dbg("FTDI device opened successfully.");
 
 	/* Purge RX/TX buffers in the FTDI chip. */
 	if ((ret = ftdi_usb_purge_buffers(devc->ftdic)) < 0) {
@@ -161,7 +159,6 @@ static int dev_open(struct sr_dev_inst *sdi)
 		       ret, ftdi_get_error_string(devc->ftdic));
 		goto err_dev_open_close_ftdic;
 	}
-	sr_dbg("FTDI chip buffers purged successfully.");
 
 	/* Reset the FTDI bitmode. */
 	ret = ftdi_set_bitmode(devc->ftdic, 0xff, BITMODE_RESET);
@@ -170,7 +167,6 @@ static int dev_open(struct sr_dev_inst *sdi)
 		       ret, ftdi_get_error_string(devc->ftdic));
 		goto err_dev_open_close_ftdic;
 	}
-	sr_dbg("FTDI chip bitmode reset successfully.");
 
 	/* Set FTDI bitmode to "sync FIFO". */
 	ret = ftdi_set_bitmode(devc->ftdic, 0xff, BITMODE_SYNCFF);
@@ -179,7 +175,6 @@ static int dev_open(struct sr_dev_inst *sdi)
 		       ret, ftdi_get_error_string(devc->ftdic));
 		goto err_dev_open_close_ftdic;
 	}
-	sr_dbg("FTDI chip sync FIFO mode entered successfully.");
 
 	/* Set the FTDI latency timer to 2. */
 	ret = ftdi_set_latency_timer(devc->ftdic, 2);
@@ -188,7 +183,6 @@ static int dev_open(struct sr_dev_inst *sdi)
 		       ret, ftdi_get_error_string(devc->ftdic));
 		goto err_dev_open_close_ftdic;
 	}
-	sr_dbg("FTDI chip latency timer set successfully.");
 
 	/* Set the FTDI read data chunk size to 64kB. */
 	ret = ftdi_read_data_set_chunksize(devc->ftdic, 64 * 1024);
@@ -197,7 +191,6 @@ static int dev_open(struct sr_dev_inst *sdi)
 		       ret, ftdi_get_error_string(devc->ftdic));
 		goto err_dev_open_close_ftdic;
 	}
-	sr_dbg("FTDI chip read data chunk size set successfully.");
 
 	/* Get the ScanaPLUS device ID from the FTDI EEPROM. */
 	if ((ret = scanaplus_get_device_id(devc)) < 0) {
@@ -207,33 +200,21 @@ static int dev_open(struct sr_dev_inst *sdi)
 	sr_dbg("Received ScanaPLUS device ID successfully: %02x %02x %02x.",
 	       devc->devid[0], devc->devid[1], devc->devid[2]);
 
-	sdi->status = SR_ST_ACTIVE;
-
 	return SR_OK;
 
 err_dev_open_close_ftdic:
 	scanaplus_close(devc);
+
 	return SR_ERR;
 }
 
 static int dev_close(struct sr_dev_inst *sdi)
 {
-	int ret;
 	struct dev_context *devc;
 
-	ret = SR_OK;
 	devc = sdi->priv;
 
-	if (sdi->status == SR_ST_ACTIVE) {
-		sr_dbg("Status ACTIVE, closing device.");
-		ret = scanaplus_close(devc);
-	} else {
-		sr_spew("Status not ACTIVE, nothing to do.");
-	}
-
-	sdi->status = SR_ST_INACTIVE;
-
-	return ret;
+	return scanaplus_close(devc);
 }
 
 static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
@@ -261,9 +242,6 @@ static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sd
 
 	(void)cg;
 
-	if (sdi->status != SR_ST_ACTIVE)
-		return SR_ERR_DEV_CLOSED;
-
 	devc = sdi->priv;
 
 	switch (key) {