X-Git-Url: http://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fhardware%2Fhung-chang-dso-2100%2Fprotocol.c;h=69efb14d3c332b125334490b4ebc901ed25794be;hb=refs%2Fheads%2Flibsigrok-0.5.x;hp=1a5dd33d959583b715c380f644a80f9591470885;hpb=05ac4a9828fc73bee0d420e96104d9cf3c5b658a;p=libsigrok.git
diff --git a/src/hardware/hung-chang-dso-2100/protocol.c b/src/hardware/hung-chang-dso-2100/protocol.c
index 1a5dd33d..69efb14d 100644
--- a/src/hardware/hung-chang-dso-2100/protocol.c
+++ b/src/hardware/hung-chang-dso-2100/protocol.c
@@ -17,14 +17,415 @@
* along with this program. If not, see .
*/
+#include
+#include
+#include
#include "protocol.h"
-SR_PRIV int hung_chang_dso_2100_receive_data(int fd, int revents, void *cb_data)
+/* The firmware can be in the following states:
+ * 0x00 Temporary state during initialization
+ * Automatically transitions to state 0x01
+ * 0x01 Idle, this state updates calibration caps
+ * Send 0x02 to go to state 0x21
+ * Send 0x03 to go to state 0x03
+ * Send 0x04 to go to state 0x14
+ * 0x21 Trigger is armed, caps are _not_ updated
+ * Send 0x99 to check if trigger event occured
+ * if triggered, goes to state 0x03
+ * else stays in state 0x21
+ * Send 0xFE to generate artificial trigger event
+ * returns to state 0x21
+ * but next 0x99 will succeed
+ * Send 0xFF to go to state 0x03 (abort capture)
+ * 0x03 Extracts two 500 sample subsets from the 5000
+ * sample capture buffer for readout
+ * When reading samples, the FPGA starts at the
+ * first of the 1000 samples and automatically
+ * advances to the next.
+ * Send 0x04 to go to state 0x0F
+ * 0x14 Scroll acquisition mode, update calib caps
+ * When reading samples, the FPGA provides the
+ * current value of the ADCs
+ * Send 0xFF to go to state 0x0F
+ * 0x0F Send channel number (1 or 2) to go to next state
+ * There are actually two 0x0F states in series
+ * which both expect the channel number.
+ * If the values don't match, they are discarded.
+ * The next state 0x05 is entered anyway
+ * 0x05 Same as state 0x0F but expects sample rate index.
+ * The next state is 0x08
+ * 0x08 Same as state 0x0F but expects step size + 1 for
+ * the second 500 sample subset
+ * The next state is 0x09
+ * 0x09 Same as state 0x0F but expects step size + 1 for
+ * the first 500 sample subset
+ * The next state is 0x06
+ * 0x06 Same as state 0x0F but expects vdiv and coupling
+ * configuration for the first channel and trigger
+ * source selection.
+ * (U46 in the schematics)
+ * The next state is 0x07
+ * 0x07 Same as state 0x0F but expects vdiv and coupling
+ * configuration for the first channel and trigger
+ * type (edge, TV hsync, TV vsync).
+ * (U47 in the schematics)
+ * The next state is 0x0A
+ * 0x0A Same as state 0x0F but expects a parameter X + 1
+ * that determines the offset of the second 500 sample
+ * subset
+ * Offset = 5 * X * step size for first subset
+ * The next state is 0x0B
+ * 0x0B Same as state 0x0F but expects the type of edge to
+ * trigger on (rising or falling)
+ * The next state is 0x0C
+ * 0x0C Same as state 0x0F but expects the calibration
+ * value for the first channel's position
+ * (POS1 in the schematics)
+ * The next state is 0x0D
+ * 0x0D Same as state 0x0F but expects the calibration
+ * value for the second channel's position
+ * (POS2 in the schematics)
+ * The next state is 0x0E
+ * 0x0E Same as state 0x0F but expects the trigger level
+ * (TRIGLEVEL in the schematics)
+ * Keep in mind that trigger sources are AC coupled
+ * The next state is 0x10
+ * 0x10 Same as state 0x0F but expects the calibration
+ * value for the first channel's offset
+ * (OFFSET1 in the schematics)
+ * The next state is 0x11
+ * 0x11 Same as state 0x0F but expects the calibration
+ * value for the first channel's gain
+ * (GAIN1 in the schematics)
+ * The next state is 0x12
+ * 0x12 Same as state 0x0F but expects the calibration
+ * value for the second channel's offset
+ * (OFFSET2 in the schematics)
+ * The next state is 0x13
+ * 0x13 Same as state 0x0F but expects the calibration
+ * value for the second channel's gain
+ * (GAIN2 in the schematics)
+ * The next state is 0x01
+ *
+ * The Mailbox appears to be half duplex.
+ * If one side writes a byte into the mailbox, it
+ * reads 0 until the other side has written a byte.
+ * So you can't transfer 0.
+ *
+ * As the status signals are unconnected, the device is not
+ * IEEE1284 compliant and can't make use of EPP or ECP transfers.
+ * It drives the data lines when control is set to:
+ * 0 => Channel A data
+ * C1284_NAUTOFD => Channel B data
+ * C1284_NSELECTIN => Mailbox
+ * C1284_NSELECTIN | C1284_NAUTOFD => 0x55
+ *
+ * It takes about 200ns for the data lines to become stable after
+ * the control lines have been changed. This driver assumes that
+ * parallel port access is slow enough to not require additional
+ * delays.
+ *
+ * Channel values in state 0x14 and the mailbox can change their
+ * value while they are selected, the latter of course only from
+ * 0 to a valid state. Beware of intermediate values.
+ *
+ * SRAM N layout (N = 1 or 2):
+ * 0x0000-0x13ff samples captured from ADC N
+ * 0x4000-0x41f3 bytes extracted from 0x6000 with step1
+ * (both ADCs but only channel N)
+ * 0x41f4-0x43e7 bytes extracted from 0x6000+5*step1*shift
+ * with step2 (both ADCs but only channel N)
+ * 0x43e8-0x43ea {0x01, 0xfe, 0x80}
+ * 0x43eb-0x444e copy of bytes from 0x4320
+ * 0x6000-0x7387 interleaved SRAM 1 and SRAM 2 bytes from
+ * 0x0001 to 0x09c5 after channel N was captured
+ *
+ * On a trigger event the FPGA directs the ADC samples to the region
+ * at 0x0000. The microcontroller then copies 5000 samples from 0x0001
+ * to 0x6000. Each time state 0x03 is entered, the bytes from 0x4000
+ * to 0x444e are filled and the start address for readout is reset to
+ * 0x4000. Readout will wrap around back to 0x4000 after reaching 0x7fff.
+ *
+ * As you can see from the layout, it was probably intended to capture
+ * 5000 samples for both probes before they are read out. We don't do that
+ * to be able to read the full 10k samples captured by the FPGA. It would
+ * be useless anyway if you don't capture repetitive signals. We're also
+ * not reading the two samples at 0x0000 to save a few milliseconds.
+ */
+
+static const struct {
+ uint16_t num;
+ uint8_t step1;
+ uint8_t shift;
+ uint8_t interleave;
+} readout_steps[] = {
+ { 1000, 1, 100, 0 },
+ { 500, 100, 2, 0 },
+ { 500, 100, 3, 0 },
+ { 500, 100, 4, 0 },
+ { 500, 100, 5, 0 },
+ { 500, 100, 6, 0 },
+ { 500, 100, 7, 0 },
+ { 500, 100, 8, 0 },
+ { 500, 100, 9, 0 },
+ { 499, 212, 41, 1 },
+ { 500, 157, 56, 1 },
+ { 500, 247, 36, 1 },
+ { 500, 232, 180, 1 },
+ { 500, 230, 182, 1 },
+ { 120, 212, 43, 1 }
+};
+
+SR_PRIV void hung_chang_dso_2100_reset_port(struct parport *port)
+{
+ ieee1284_write_control(port,
+ C1284_NSTROBE | C1284_NAUTOFD | C1284_NSELECTIN);
+ ieee1284_data_dir(port, 0);
+}
+
+SR_PRIV gboolean hung_chang_dso_2100_check_id(struct parport *port)
+{
+ gboolean ret = FALSE;
+
+ if (ieee1284_data_dir(port, 1) != E1284_OK)
+ goto fail;
+
+ ieee1284_write_control(port, C1284_NSTROBE | C1284_NAUTOFD | C1284_NSELECTIN);
+ ieee1284_write_control(port, C1284_NAUTOFD | C1284_NSELECTIN);
+
+ if (ieee1284_read_data(port) != 0x55)
+ goto fail;
+
+ ret = TRUE;
+fail:
+ hung_chang_dso_2100_reset_port(port);
+
+ return ret;
+}
+
+SR_PRIV void hung_chang_dso_2100_write_mbox(struct parport *port, uint8_t val)
+{
+ sr_dbg("mbox <= %X", val);
+ ieee1284_write_control(port,
+ C1284_NSTROBE | C1284_NINIT | C1284_NSELECTIN);
+ ieee1284_data_dir(port, 0);
+ ieee1284_write_data(port, val);
+ ieee1284_write_control(port, C1284_NINIT | C1284_NSELECTIN);
+ ieee1284_write_control(port,
+ C1284_NSTROBE | C1284_NINIT | C1284_NSELECTIN);
+ ieee1284_data_dir(port, 1);
+ ieee1284_write_control(port,
+ C1284_NSTROBE | C1284_NAUTOFD | C1284_NINIT | C1284_NSELECTIN);
+}
+
+SR_PRIV uint8_t hung_chang_dso_2100_read_mbox(struct parport *port, float timeout)
+{
+ GTimer *timer = NULL;
+ uint8_t val;
+
+ ieee1284_write_control(port, C1284_NSTROBE | C1284_NSELECTIN);
+ ieee1284_write_control(port, C1284_NSELECTIN);
+
+ for (;;) {
+ if (ieee1284_read_data(port)) {
+ /* Always read the value a second time.
+ * The first one may be unstable. */
+ val = ieee1284_read_data(port);
+ break;
+ }
+ if (!timer) {
+ timer = g_timer_new();
+ } else if (g_timer_elapsed(timer, NULL) > timeout) {
+ val = 0;
+ break;
+ }
+ }
+
+ ieee1284_write_control(port, C1284_NSTROBE | C1284_NSELECTIN);
+ ieee1284_write_control(port,
+ C1284_NSTROBE | C1284_NAUTOFD | C1284_NINIT | C1284_NSELECTIN);
+
+ if (timer)
+ g_timer_destroy(timer);
+ sr_dbg("mbox == %X", val);
+ return val;
+}
+
+SR_PRIV int hung_chang_dso_2100_move_to(const struct sr_dev_inst *sdi, uint8_t target)
{
- const struct sr_dev_inst *sdi;
+ struct dev_context *devc = sdi->priv;
+ int timeout = 40;
+ uint8_t c;
+
+ while (timeout--) {
+ c = hung_chang_dso_2100_read_mbox(sdi->conn, 0.1);
+ if (c == target)
+ return SR_OK;
+
+ switch (c) {
+ case 0x00:
+ /* Can happen if someone wrote something into
+ * the mbox that was not expected by the uC.
+ * Alternating between 0xff and 4 helps in
+ * all states. */
+ c = (timeout & 1) ? 0xFF : 0x04;
+ break;
+ case 0x01:
+ switch (target) {
+ case 0x21: c = 2; break;
+ case 0x03: c = 3; break;
+ default: c = 4;
+ }
+ break;
+ case 0x03: c = 4; break;
+ case 0x05: c = devc->rate + 1; break;
+ case 0x06: c = devc->cctl[0]; break;
+ case 0x07: c = devc->cctl[1]; break;
+ case 0x08: c = 1 /* step 2 */ + 1 ; break;
+ case 0x09: c = readout_steps[devc->step].step1 + 1; break;
+ case 0x0A: c = readout_steps[devc->step].shift + 1; break;
+ case 0x0B: c = devc->edge + 1; break;
+ case 0x0C: c = devc->pos[0]; break;
+ case 0x0D: c = devc->pos[1]; break;
+ case 0x0E: c = devc->tlevel; break;
+ case 0x0F:
+ if (!devc->channel)
+ c = 1;
+ else if (readout_steps[devc->step].interleave)
+ c = devc->adc2 ? 2 : 1;
+ else
+ c = devc->channel;
+ break;
+ case 0x10: c = devc->offset[0]; break;
+ case 0x11: c = devc->gain[0]; break;
+ case 0x12: c = devc->offset[1]; break;
+ case 0x13: c = devc->gain[1]; break;
+ case 0x14:
+ case 0x21: c = 0xFF; break;
+ default:
+ return SR_ERR_DATA;
+ }
+ hung_chang_dso_2100_write_mbox(sdi->conn, c);
+ }
+ return SR_ERR_TIMEOUT;
+}
+
+static void skip_samples(struct parport *port, uint8_t ctrl, size_t num)
+{
+ while (num--) {
+ ieee1284_write_control(port, ctrl & ~C1284_NSTROBE);
+ ieee1284_write_control(port, ctrl);
+ }
+}
+
+static void read_samples(struct parport *port, uint8_t ctrl, uint8_t *buf, size_t num, size_t stride)
+{
+ while (num--) {
+ ieee1284_write_control(port, ctrl & ~C1284_NSTROBE);
+ *buf = ieee1284_read_data(port);
+ buf += stride;
+ ieee1284_write_control(port, ctrl);
+ }
+}
+
+static void push_samples(const struct sr_dev_inst *sdi, uint8_t *buf, size_t num)
+{
+ struct dev_context *devc = sdi->priv;
+ float *data = devc->samples;
+ struct sr_datafeed_analog analog;
+ struct sr_analog_encoding encoding;
+ struct sr_analog_meaning meaning;
+ struct sr_analog_spec spec;
+ struct sr_datafeed_packet packet = {
+ .type = SR_DF_ANALOG,
+ .payload = &analog,
+ };
+ float factor = devc->factor;
+
+ while (num--)
+ data[num] = (buf[num] - 0x80) * factor;
+
+ float vdivlog = log10f(factor);
+ int digits = -(int)vdivlog + (vdivlog < 0.0);
+
+ sr_analog_init(&analog, &encoding, &meaning, &spec, digits);
+ analog.meaning->channels = devc->enabled_channel;
+ analog.meaning->mq = SR_MQ_VOLTAGE;
+ analog.meaning->unit = SR_UNIT_VOLT;
+ analog.meaning->mqflags = 0;
+ analog.num_samples = num;
+ analog.data = data;
+
+ sr_session_send(sdi, &packet);
+}
+
+static int read_subframe(const struct sr_dev_inst *sdi, uint8_t *buf)
+{
+ struct dev_context *devc = sdi->priv;
+ uint8_t sig[3], ctrl;
+ unsigned int num;
+ gboolean interleave;
+
+ interleave = readout_steps[devc->step].interleave;
+ ctrl = C1284_NSTROBE;
+ if ((interleave && devc->adc2) || (!interleave && devc->channel == 2))
+ ctrl |= C1284_NAUTOFD;
+
+ ieee1284_write_control(sdi->conn, ctrl);
+ num = readout_steps[devc->step].num;
+ if (num < 1000)
+ skip_samples(sdi->conn, ctrl, 1000 - num);
+ read_samples(sdi->conn, ctrl, buf + (devc->adc2 ? 1 : 0), num,
+ interleave ? 2 : 1);
+ read_samples(sdi->conn, ctrl, sig, 3, 1);
+ if (sig[0] != 0x01 || sig[1] != 0xfe || sig[2] != 0x80) {
+ if (--devc->retries) {
+ sr_dbg("Missing signature at end of buffer, %i tries remaining",
+ devc->retries);
+ return TRUE;
+ } else {
+ sr_err("Failed to read frame without transfer errors");
+ devc->step = 0;
+ }
+ } else {
+ if (interleave && !devc->adc2) {
+ devc->adc2 = TRUE;
+ devc->retries = MAX_RETRIES;
+ return TRUE;
+ } else {
+ if (interleave)
+ num *= 2;
+ if (!devc->step) {
+ struct sr_datafeed_packet packet = {
+ .type = SR_DF_TRIGGER
+ };
+
+ push_samples(sdi, buf, 6);
+ sr_session_send(sdi, &packet);
+ buf += 6;
+ num -= 6;
+ }
+ push_samples(sdi, buf, num);
+ if (++devc->step > devc->last_step)
+ devc->step = 0;
+ }
+ }
+
+ devc->adc2 = FALSE;
+ devc->retries = MAX_RETRIES;
+
+ return devc->step > 0;
+}
+
+SR_PRIV int hung_chang_dso_2100_poll(int fd, int revents, void *cb_data)
+{
+ struct sr_datafeed_packet packet = { .type = SR_DF_FRAME_BEGIN };
+ struct sr_dev_inst *sdi;
struct dev_context *devc;
+ uint8_t state, buf[1000];
(void)fd;
+ (void)revents;
if (!(sdi = cb_data))
return TRUE;
@@ -32,9 +433,40 @@ SR_PRIV int hung_chang_dso_2100_receive_data(int fd, int revents, void *cb_data)
if (!(devc = sdi->priv))
return TRUE;
- if (revents == G_IO_IN) {
- /* TODO */
+ if (devc->state_known)
+ hung_chang_dso_2100_write_mbox(sdi->conn, 0x99);
+
+ state = hung_chang_dso_2100_read_mbox(sdi->conn, 0.00025);
+ devc->state_known = (state != 0x00);
+
+ if (!devc->state_known || state == 0x21)
+ return TRUE;
+
+ if (state != 0x03) {
+ sr_err("Unexpected state 0x%X while checking for trigger", state);
+ return FALSE;
+ }
+
+ sr_session_send(sdi, &packet);
+
+ if (devc->channel) {
+ while (read_subframe(sdi, buf)) {
+ if (hung_chang_dso_2100_move_to(sdi, 1) != SR_OK)
+ break;
+ hung_chang_dso_2100_write_mbox(sdi->conn, 3);
+ g_usleep(1700);
+ if (hung_chang_dso_2100_read_mbox(sdi->conn, 0.02) != 0x03)
+ break;
+ }
}
+ packet.type = SR_DF_FRAME_END;
+ sr_session_send(sdi, &packet);
+
+ if (++devc->frame >= devc->frame_limit)
+ sr_dev_acquisition_stop(sdi);
+ else
+ hung_chang_dso_2100_move_to(sdi, 0x21);
+
return TRUE;
}