X-Git-Url: http://sigrok.org/gitweb/?a=blobdiff_plain;f=libserialport.h.in;h=9c6842ab7f079f1ed769269e0f259b21326f34f6;hb=27911925c11b01943e2a569ebb71fe259c387329;hp=44c6684fb11bf07fd9330770f148f52ec1c7d67d;hpb=144a598f190bbfe5244d6fb1192c7a1fae2cbbef;p=libserialport.git diff --git a/libserialport.h.in b/libserialport.h.in index 44c6684..9c6842a 100644 --- a/libserialport.h.in +++ b/libserialport.h.in @@ -85,9 +85,6 @@ extern "C" { #endif #include -#ifdef _WIN32 -#include -#endif /** Return values. */ enum sp_return { @@ -109,7 +106,7 @@ enum sp_mode { SP_MODE_READ = 1, /** Open port for write access. */ SP_MODE_WRITE = 2, - /** Open port for read and write access. */ + /** Open port for read and write access. @since 0.1.1 */ SP_MODE_READ_WRITE = 3 }; @@ -231,13 +228,17 @@ enum sp_signal { SP_SIG_RI = 8 }; -/** Transport types. */ +/** + * Transport types. + * + * @since 0.1.1 + */ enum sp_transport { - /** Native platform serial port. */ + /** Native platform serial port. @since 0.1.1 */ SP_TRANSPORT_NATIVE, - /** USB serial port adapter. */ + /** USB serial port adapter. @since 0.1.1 */ SP_TRANSPORT_USB, - /** Bluetooth serial port adapter. */ + /** Bluetooth serial port adapter. @since 0.1.1 */ SP_TRANSPORT_BLUETOOTH }; @@ -282,8 +283,10 @@ struct sp_event_set { * * The result should be freed after use by calling sp_free_port(). * - * If any error is returned, the variable pointed to by port_ptr will be set - * to NULL. Otherwise, it will be set to point to the newly allocated port. + * @param[in] portname The OS-specific name of a serial port. Must not be NULL. + * @param[out] port_ptr If any error is returned, the variable pointed to by + * port_ptr will be set to NULL. Otherwise, it will be set + * to point to the newly allocated port. Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -294,6 +297,8 @@ enum sp_return sp_get_port_by_name(const char *portname, struct sp_port **port_p /** * Free a port structure obtained from sp_get_port_by_name() or sp_copy_port(). * + * @param[in] port Pointer to a port structure. Must not be NULL. + * * @since 0.1.0 */ void sp_free_port(struct sp_port *port); @@ -309,8 +314,9 @@ void sp_free_port(struct sp_port *port); * If a port from the list is to be used after freeing the list, it must be * copied first using sp_copy_port(). * - * If any error is returned, the variable pointed to by list_ptr will be set - * to NULL. Otherwise, it will be set to point to the newly allocated array. + * @param[out] list_ptr If any error is returned, the variable pointed to by + * list_ptr will be set to NULL. Otherwise, it will be set + * to point to the newly allocated array. Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -319,15 +325,17 @@ void sp_free_port(struct sp_port *port); enum sp_return sp_list_ports(struct sp_port ***list_ptr); /** - * Make a new copy of a sp_port structure. + * Make a new copy of an sp_port structure. * * The user should allocate a variable of type "struct sp_port *" and pass a * pointer to this to receive the result. * * The copy should be freed after use by calling sp_free_port(). * - * If any error is returned, the variable pointed to by copy_ptr will be set - * to NULL. Otherwise, it will be set to point to the newly allocated copy. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[out] copy_ptr If any error is returned, the variable pointed to by + * copy_ptr will be set to NULL. Otherwise, it will be set + * to point to the newly allocated copy. Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -341,6 +349,8 @@ enum sp_return sp_copy_port(const struct sp_port *port, struct sp_port **copy_pt * This will also free all the sp_port structures referred to from the list; * any that are to be retained must be copied first using sp_copy_port(). * + * @param[in] ports Pointer to a list of port structures. Must not be NULL. + * * @since 0.1.0 */ void sp_free_port_list(struct sp_port **ports); @@ -357,8 +367,8 @@ void sp_free_port_list(struct sp_port **ports); /** * Open the specified serial port. * - * @param port Pointer to port structure. - * @param flags Flags to use when opening the serial port. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] flags Flags to use when opening the serial port. * * @return SP_OK upon success, a negative error code otherwise. * @@ -369,6 +379,8 @@ enum sp_return sp_open(struct sp_port *port, enum sp_mode flags); /** * Close the specified serial port. * + * @param[in] port Pointer to a port structure. Must not be NULL. + * * @return SP_OK upon success, a negative error code otherwise. * * @since 0.1.0 @@ -382,11 +394,11 @@ enum sp_return sp_close(struct sp_port *port); * current operating system; e.g. for Windows it will usually be a "COMn" * device name, and for Unix it will be a device path beginning with "/dev/". * - * @param port Pointer to port structure. + * @param[in] port Pointer to a port structure. Must not be NULL. * * @return The port name, or NULL if an invalid port is passed. The name - * string is part of the port structure and may not be used after the - * port structure has been freed. + * string is part of the port structure and may not be used after + * the port structure has been freed. * * @since 0.1.0 */ @@ -395,37 +407,39 @@ char *sp_get_port_name(const struct sp_port *port); /** * Get a description for a port, to present to end user. * - * @param port Pointer to port structure. + * @param[in] port Pointer to a port structure. Must not be NULL. * * @return The port description, or NULL if an invalid port is passed. - * The description string is part of the port structure and may not be used - * after the port structure has been freed. + * The description string is part of the port structure and may not + * be used after the port structure has been freed. * - * @since 0.2.0 + * @since 0.1.1 */ -char *sp_get_port_description(struct sp_port *port); +char *sp_get_port_description(const struct sp_port *port); /** * Get the transport type used by a port. * - * @param port Pointer to port structure. + * @param[in] port Pointer to a port structure. Must not be NULL. * * @return The port transport type. * - * @since 0.2.0 + * @since 0.1.1 */ -enum sp_transport sp_get_port_transport(struct sp_port *port); +enum sp_transport sp_get_port_transport(const struct sp_port *port); /** * Get the USB bus number and address on bus of a USB serial adapter port. * - * @param port Pointer to port structure. - * @param usb_bus Pointer to variable to store USB bus. - * @param usb_address Pointer to variable to store USB address + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[out] usb_bus Pointer to a variable to store the USB bus. + * Can be NULL (in that case it will be ignored). + * @param[out] usb_address Pointer to a variable to store the USB address. + * Can be NULL (in that case it will be ignored). * * @return SP_OK upon success, a negative error code otherwise. * - * @since 0.2.0 + * @since 0.1.1 */ enum sp_return sp_get_port_usb_bus_address(const struct sp_port *port, int *usb_bus, int *usb_address); @@ -433,65 +447,67 @@ enum sp_return sp_get_port_usb_bus_address(const struct sp_port *port, /** * Get the USB Vendor ID and Product ID of a USB serial adapter port. * - * @param port Pointer to port structure. - * @param usb_vid Pointer to variable to store USB VID. - * @param usb_pid Pointer to variable to store USB PID + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[out] usb_vid Pointer to a variable to store the USB VID. + * Can be NULL (in that case it will be ignored). + * @param[out] usb_pid Pointer to a variable to store the USB PID. + * Can be NULL (in that case it will be ignored). * * @return SP_OK upon success, a negative error code otherwise. * - * @since 0.2.0 + * @since 0.1.1 */ enum sp_return sp_get_port_usb_vid_pid(const struct sp_port *port, int *usb_vid, int *usb_pid); /** * Get the USB manufacturer string of a USB serial adapter port. * - * @param port Pointer to port structure. + * @param[in] port Pointer to a port structure. Must not be NULL. * * @return The port manufacturer string, or NULL if an invalid port is passed. - * The manufacturer string is part of the port structure and may not be used - * after the port structure has been freed. + * The manufacturer string is part of the port structure and may not + * be used after the port structure has been freed. * - * @since 0.2.0 + * @since 0.1.1 */ char *sp_get_port_usb_manufacturer(const struct sp_port *port); /** * Get the USB product string of a USB serial adapter port. * - * @param port Pointer to port structure. + * @param[in] port Pointer to a port structure. Must not be NULL. * * @return The port product string, or NULL if an invalid port is passed. - * The product string is part of the port structure and may not be used - * after the port structure has been freed. + * The product string is part of the port structure and may not be + * used after the port structure has been freed. * - * @since 0.2.0 + * @since 0.1.1 */ char *sp_get_port_usb_product(const struct sp_port *port); /** * Get the USB serial number string of a USB serial adapter port. * - * @param port Pointer to port structure. + * @param[in] port Pointer to a port structure. Must not be NULL. * * @return The port serial number, or NULL if an invalid port is passed. - * The serial number string is part of the port structure and may not be used - * after the port structure has been freed. + * The serial number string is part of the port structure and may + * not be used after the port structure has been freed. * - * @since 0.2.0 + * @since 0.1.1 */ char *sp_get_port_usb_serial(const struct sp_port *port); /** * Get the MAC address of a Bluetooth serial adapter port. * - * @param port Pointer to port structure. + * @param[in] port Pointer to a port structure. Must not be NULL. * * @return The port MAC address, or NULL if an invalid port is passed. - * The MAC address string is part of the port structure and may not be used - * after the port structure has been freed. + * The MAC address string is part of the port structure and may not + * be used after the port structure has been freed. * - * @since 0.2.0 + * @since 0.1.1 */ char *sp_get_port_bluetooth_address(const struct sp_port *port); @@ -515,6 +531,12 @@ char *sp_get_port_bluetooth_address(const struct sp_port *port); * that direct usage of the OS handle will not conflict with the * library's own usage of the port. Be careful. * + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[out] result_ptr If any error is returned, the variable pointed to by + * result_ptr will have unknown contents and should not + * be used. Otherwise, it will be set to point to the + * OS handle. Must not be NULL. + * * @return SP_OK upon success, a negative error code otherwise. * * @since 0.1.0 @@ -533,17 +555,20 @@ enum sp_return sp_get_port_handle(const struct sp_port *port, void *result_ptr); /** * Allocate a port configuration structure. * - * The user should allocate a variable of type "struct sp_config *" and pass a - * pointer to this to receive the result. The variable will be updated to - * point to the new configuration structure. The structure is opaque and must - * be accessed via the functions provided. + * The user should allocate a variable of type "struct sp_port_config *" and + * pass a pointer to this to receive the result. The variable will be updated + * to point to the new configuration structure. The structure is opaque and + * must be accessed via the functions provided. * * All parameters in the structure will be initialised to special values which * are ignored by sp_set_config(). * * The structure should be freed after use by calling sp_free_config(). * - * @param config_ptr Pointer to variable to receive result. + * @param[out] config_ptr If any error is returned, the variable pointed to by + * config_ptr will be set to NULL. Otherwise, it will + * be set to point to the allocated config structure. + * Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -554,7 +579,7 @@ enum sp_return sp_new_config(struct sp_port_config **config_ptr); /** * Free a port configuration structure. * - * @param config Pointer to configuration structure. + * @param[in] config Pointer to a configuration structure. Must not be NULL. * * @since 0.1.0 */ @@ -571,6 +596,11 @@ void sp_free_config(struct sp_port_config *config); * supported by libserialport, will be set to special values that are * ignored by sp_set_config(). * + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[out] config Pointer to a configuration structure that will hold + * the result. Upon errors the contents of the config + * struct will not be changed. Must not be NULL. + * * @return SP_OK upon success, a negative error code otherwise. * * @since 0.1.0 @@ -584,6 +614,12 @@ enum sp_return sp_get_config(struct sp_port *port, struct sp_port_config *config * -1, but see the documentation for each field). These values will be ignored * and the corresponding setting left unchanged on the port. * + * Upon errors, the configuration of the serial port is unknown since + * partial/incomplete config updates may have happened. + * + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * * @return SP_OK upon success, a negative error code otherwise. * * @since 0.1.0 @@ -593,8 +629,8 @@ enum sp_return sp_set_config(struct sp_port *port, const struct sp_port_config * /** * Set the baud rate for the specified serial port. * - * @param port Pointer to port structure. - * @param baudrate Baud rate in bits per second. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] baudrate Baud rate in bits per second. * * @return SP_OK upon success, a negative error code otherwise. * @@ -605,11 +641,11 @@ enum sp_return sp_set_baudrate(struct sp_port *port, int baudrate); /** * Get the baud rate from a port configuration. * - * The user should allocate a variable of type int and pass a pointer to this - * to receive the result. + * The user should allocate a variable of type int and + * pass a pointer to this to receive the result. * - * @param config Pointer to configuration structure. - * @param baudrate_ptr Pointer to variable to store result. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[out] baudrate_ptr Pointer to a variable to store the result. Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -620,8 +656,8 @@ enum sp_return sp_get_config_baudrate(const struct sp_port_config *config, int * /** * Set the baud rate in a port configuration. * - * @param config Pointer to configuration structure. - * @param baudrate Baud rate in bits per second, or -1 to retain current setting. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[in] baudrate Baud rate in bits per second, or -1 to retain the current setting. * * @return SP_OK upon success, a negative error code otherwise. * @@ -632,8 +668,8 @@ enum sp_return sp_set_config_baudrate(struct sp_port_config *config, int baudrat /** * Set the data bits for the specified serial port. * - * @param port Pointer to port structure. - * @param bits Number of data bits. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] bits Number of data bits. * * @return SP_OK upon success, a negative error code otherwise. * @@ -644,11 +680,11 @@ enum sp_return sp_set_bits(struct sp_port *port, int bits); /** * Get the data bits from a port configuration. * - * The user should allocate a variable of type int and pass a pointer to this - * to receive the result. + * The user should allocate a variable of type int and + * pass a pointer to this to receive the result. * - * @param config Pointer to configuration structure. - * @param bits_ptr Pointer to variable to store result. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[out] bits_ptr Pointer to a variable to store the result. Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -659,8 +695,8 @@ enum sp_return sp_get_config_bits(const struct sp_port_config *config, int *bits /** * Set the data bits in a port configuration. * - * @param config Pointer to configuration structure. - * @param bits Number of data bits, or -1 to retain current setting. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[in] bits Number of data bits, or -1 to retain the current setting. * * @return SP_OK upon success, a negative error code otherwise. * @@ -671,8 +707,8 @@ enum sp_return sp_set_config_bits(struct sp_port_config *config, int bits); /** * Set the parity setting for the specified serial port. * - * @param port Pointer to port structure. - * @param parity Parity setting. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] parity Parity setting. * * @return SP_OK upon success, a negative error code otherwise. * @@ -683,11 +719,11 @@ enum sp_return sp_set_parity(struct sp_port *port, enum sp_parity parity); /** * Get the parity setting from a port configuration. * - * The user should allocate a variable of type enum sp_parity and pass a pointer to this - * to receive the result. + * The user should allocate a variable of type enum sp_parity and + * pass a pointer to this to receive the result. * - * @param config Pointer to configuration structure. - * @param parity_ptr Pointer to variable to store result. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[out] parity_ptr Pointer to a variable to store the result. Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -698,8 +734,8 @@ enum sp_return sp_get_config_parity(const struct sp_port_config *config, enum sp /** * Set the parity setting in a port configuration. * - * @param config Pointer to configuration structure. - * @param parity Parity setting, or -1 to retain current setting. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[in] parity Parity setting, or -1 to retain the current setting. * * @return SP_OK upon success, a negative error code otherwise. * @@ -710,8 +746,8 @@ enum sp_return sp_set_config_parity(struct sp_port_config *config, enum sp_parit /** * Set the stop bits for the specified serial port. * - * @param port Pointer to port structure. - * @param stopbits Number of stop bits. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] stopbits Number of stop bits. * * @return SP_OK upon success, a negative error code otherwise. * @@ -722,11 +758,11 @@ enum sp_return sp_set_stopbits(struct sp_port *port, int stopbits); /** * Get the stop bits from a port configuration. * - * The user should allocate a variable of type int and pass a pointer to this - * to receive the result. + * The user should allocate a variable of type int and + * pass a pointer to this to receive the result. * - * @param config Pointer to configuration structure. - * @param stopbits_ptr Pointer to variable to store result. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[out] stopbits_ptr Pointer to a variable to store the result. Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -737,8 +773,8 @@ enum sp_return sp_get_config_stopbits(const struct sp_port_config *config, int * /** * Set the stop bits in a port configuration. * - * @param config Pointer to configuration structure. - * @param stopbits Number of stop bits, or -1 to retain current setting. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[in] stopbits Number of stop bits, or -1 to retain the current setting. * * @return SP_OK upon success, a negative error code otherwise. * @@ -749,8 +785,8 @@ enum sp_return sp_set_config_stopbits(struct sp_port_config *config, int stopbit /** * Set the RTS pin behaviour for the specified serial port. * - * @param port Pointer to port structure. - * @param rts RTS pin mode. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] rts RTS pin mode. * * @return SP_OK upon success, a negative error code otherwise. * @@ -761,11 +797,11 @@ enum sp_return sp_set_rts(struct sp_port *port, enum sp_rts rts); /** * Get the RTS pin behaviour from a port configuration. * - * The user should allocate a variable of type enum sp_rts and pass a pointer to this - * to receive the result. + * The user should allocate a variable of type enum sp_rts and + * pass a pointer to this to receive the result. * - * @param config Pointer to configuration structure. - * @param rts_ptr Pointer to variable to store result. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[out] rts_ptr Pointer to a variable to store the result. Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -776,8 +812,8 @@ enum sp_return sp_get_config_rts(const struct sp_port_config *config, enum sp_rt /** * Set the RTS pin behaviour in a port configuration. * - * @param config Pointer to configuration structure. - * @param rts RTS pin mode, or -1 to retain current setting. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[in] rts RTS pin mode, or -1 to retain the current setting. * * @return SP_OK upon success, a negative error code otherwise. * @@ -788,8 +824,8 @@ enum sp_return sp_set_config_rts(struct sp_port_config *config, enum sp_rts rts) /** * Set the CTS pin behaviour for the specified serial port. * - * @param port Pointer to port structure. - * @param cts CTS pin mode. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] cts CTS pin mode. * * @return SP_OK upon success, a negative error code otherwise. * @@ -800,11 +836,11 @@ enum sp_return sp_set_cts(struct sp_port *port, enum sp_cts cts); /** * Get the CTS pin behaviour from a port configuration. * - * The user should allocate a variable of type enum sp_cts and pass a pointer to this - * to receive the result. + * The user should allocate a variable of type enum sp_cts and + * pass a pointer to this to receive the result. * - * @param config Pointer to configuration structure. - * @param cts_ptr Pointer to variable to store result. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[out] cts_ptr Pointer to a variable to store the result. Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -815,8 +851,8 @@ enum sp_return sp_get_config_cts(const struct sp_port_config *config, enum sp_ct /** * Set the CTS pin behaviour in a port configuration. * - * @param config Pointer to configuration structure. - * @param cts CTS pin mode, or -1 to retain current setting. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[in] cts CTS pin mode, or -1 to retain the current setting. * * @return SP_OK upon success, a negative error code otherwise. * @@ -827,8 +863,8 @@ enum sp_return sp_set_config_cts(struct sp_port_config *config, enum sp_cts cts) /** * Set the DTR pin behaviour for the specified serial port. * - * @param port Pointer to port structure. - * @param dtr DTR pin mode. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] dtr DTR pin mode. * * @return SP_OK upon success, a negative error code otherwise. * @@ -839,11 +875,11 @@ enum sp_return sp_set_dtr(struct sp_port *port, enum sp_dtr dtr); /** * Get the DTR pin behaviour from a port configuration. * - * The user should allocate a variable of type enum sp_dtr and pass a pointer to this - * to receive the result. + * The user should allocate a variable of type enum sp_dtr and + * pass a pointer to this to receive the result. * - * @param config Pointer to configuration structure. - * @param dtr_ptr Pointer to variable to store result. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[out] dtr_ptr Pointer to a variable to store the result. Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -854,8 +890,8 @@ enum sp_return sp_get_config_dtr(const struct sp_port_config *config, enum sp_dt /** * Set the DTR pin behaviour in a port configuration. * - * @param config Pointer to configuration structure. - * @param dtr DTR pin mode, or -1 to retain current setting. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[in] dtr DTR pin mode, or -1 to retain the current setting. * * @return SP_OK upon success, a negative error code otherwise. * @@ -866,8 +902,8 @@ enum sp_return sp_set_config_dtr(struct sp_port_config *config, enum sp_dtr dtr) /** * Set the DSR pin behaviour for the specified serial port. * - * @param port Pointer to port structure. - * @param dsr DSR pin mode. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] dsr DSR pin mode. * * @return SP_OK upon success, a negative error code otherwise. * @@ -878,11 +914,11 @@ enum sp_return sp_set_dsr(struct sp_port *port, enum sp_dsr dsr); /** * Get the DSR pin behaviour from a port configuration. * - * The user should allocate a variable of type enum sp_dsr and pass a pointer to this - * to receive the result. + * The user should allocate a variable of type enum sp_dsr and + * pass a pointer to this to receive the result. * - * @param config Pointer to configuration structure. - * @param dsr_ptr Pointer to variable to store result. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[out] dsr_ptr Pointer to a variable to store the result. Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -893,8 +929,8 @@ enum sp_return sp_get_config_dsr(const struct sp_port_config *config, enum sp_ds /** * Set the DSR pin behaviour in a port configuration. * - * @param config Pointer to configuration structure. - * @param dsr DSR pin mode, or -1 to retain current setting. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[in] dsr DSR pin mode, or -1 to retain the current setting. * * @return SP_OK upon success, a negative error code otherwise. * @@ -905,8 +941,8 @@ enum sp_return sp_set_config_dsr(struct sp_port_config *config, enum sp_dsr dsr) /** * Set the XON/XOFF configuration for the specified serial port. * - * @param port Pointer to port structure. - * @param xon_xoff XON/XOFF mode. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] xon_xoff XON/XOFF mode. * * @return SP_OK upon success, a negative error code otherwise. * @@ -917,11 +953,11 @@ enum sp_return sp_set_xon_xoff(struct sp_port *port, enum sp_xonxoff xon_xoff); /** * Get the XON/XOFF configuration from a port configuration. * - * The user should allocate a variable of type enum sp_xonxoff and pass a pointer to this - * to receive the result. + * The user should allocate a variable of type enum sp_xonxoff and + * pass a pointer to this to receive the result. * - * @param config Pointer to configuration structure. - * @param xon_xoff_ptr Pointer to variable to store result. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[out] xon_xoff_ptr Pointer to a variable to store the result. Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -932,8 +968,8 @@ enum sp_return sp_get_config_xon_xoff(const struct sp_port_config *config, enum /** * Set the XON/XOFF configuration in a port configuration. * - * @param config Pointer to configuration structure. - * @param xon_xoff XON/XOFF mode, or -1 to retain current setting. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[in] xon_xoff XON/XOFF mode, or -1 to retain the current setting. * * @return SP_OK upon success, a negative error code otherwise. * @@ -949,8 +985,8 @@ enum sp_return sp_set_config_xon_xoff(struct sp_port_config *config, enum sp_xon * type. For more fine-grained control of these settings, use their * individual configuration functions. * - * @param config Pointer to configuration structure. - * @param flowcontrol Flow control setting to use. + * @param[in] config Pointer to a configuration structure. Must not be NULL. + * @param[in] flowcontrol Flow control setting to use. * * @return SP_OK upon success, a negative error code otherwise. * @@ -966,8 +1002,8 @@ enum sp_return sp_set_config_flowcontrol(struct sp_port_config *config, enum sp_ * type. For more fine-grained control of these settings, use their * individual configuration functions. * - * @param port Pointer to port structure. - * @param flowcontrol Flow control setting to use. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] flowcontrol Flow control setting to use. * * @return SP_OK upon success, a negative error code otherwise. * @@ -998,10 +1034,10 @@ enum sp_return sp_set_flowcontrol(struct sp_port *port, enum sp_flowcontrol flow * sp_get_port_handle() and use this to call select() or pselect(), * with appropriate arrangements to return if a signal is received. * - * @param port Pointer to port structure. - * @param buf Buffer in which to store the bytes read. - * @param count Requested number of bytes to read. - * @param timeout Timeout in milliseconds, or zero to wait indefinitely. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[out] buf Buffer in which to store the bytes read. Must not be NULL. + * @param[in] count Requested number of bytes to read. + * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely. * * @return The number of bytes read on success, or a negative error code. If * the number of bytes returned is less than that requested, the @@ -1011,14 +1047,14 @@ enum sp_return sp_set_flowcontrol(struct sp_port *port, enum sp_flowcontrol flow * * @since 0.1.0 */ -enum sp_return sp_blocking_read(struct sp_port *port, void *buf, size_t count, unsigned int timeout); +enum sp_return sp_blocking_read(struct sp_port *port, void *buf, size_t count, unsigned int timeout_ms); /** * Read bytes from the specified serial port, without blocking. * - * @param port Pointer to port structure. - * @param buf Buffer in which to store the bytes read. - * @param count Maximum number of bytes to read. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[out] buf Buffer in which to store the bytes read. Must not be NULL. + * @param[in] count Maximum number of bytes to read. * * @return The number of bytes read on success, or a negative error code. The * number of bytes returned may be any number from zero to the maximum @@ -1047,10 +1083,10 @@ enum sp_return sp_nonblocking_read(struct sp_port *port, void *buf, size_t count * sp_get_port_handle() and use this to call select() or pselect(), * with appropriate arrangements to return if a signal is received. * - * @param port Pointer to port structure. - * @param buf Buffer containing the bytes to write. - * @param count Requested number of bytes to write. - * @param timeout Timeout in milliseconds, or zero to wait indefinitely. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] buf Buffer containing the bytes to write. Must not be NULL. + * @param[in] count Requested number of bytes to write. + * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely. * * @return The number of bytes written on success, or a negative error code. * If the number of bytes returned is less than that requested, the @@ -1062,7 +1098,7 @@ enum sp_return sp_nonblocking_read(struct sp_port *port, void *buf, size_t count * * @since 0.1.0 */ -enum sp_return sp_blocking_write(struct sp_port *port, const void *buf, size_t count, unsigned int timeout); +enum sp_return sp_blocking_write(struct sp_port *port, const void *buf, size_t count, unsigned int timeout_ms); /** * Write bytes to the specified serial port, without blocking. @@ -1073,9 +1109,9 @@ enum sp_return sp_blocking_write(struct sp_port *port, const void *buf, size_t c * been transmitted, use the sp_output_waiting() function. To wait until all * written bytes have actually been transmitted, use the sp_drain() function. * - * @param port Pointer to port structure. - * @param buf Buffer containing the bytes to write. - * @param count Maximum number of bytes to write. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] buf Buffer containing the bytes to write. Must not be NULL. + * @param[in] count Maximum number of bytes to write. * * @return The number of bytes written on success, or a negative error code. * The number of bytes returned may be any number from zero to the @@ -1088,7 +1124,7 @@ enum sp_return sp_nonblocking_write(struct sp_port *port, const void *buf, size_ /** * Gets the number of bytes waiting in the input buffer. * - * @param port Pointer to port structure. + * @param[in] port Pointer to a port structure. Must not be NULL. * * @return Number of bytes waiting on success, a negative error code otherwise. * @@ -1099,7 +1135,7 @@ enum sp_return sp_input_waiting(struct sp_port *port); /** * Gets the number of bytes waiting in the output buffer. * - * @param port Pointer to port structure. + * @param[in] port Pointer to a port structure. Must not be NULL. * * @return Number of bytes waiting on success, a negative error code otherwise. * @@ -1110,8 +1146,8 @@ enum sp_return sp_output_waiting(struct sp_port *port); /** * Flush serial port buffers. Data in the selected buffer(s) is discarded. * - * @param port Pointer to port structure. - * @param buffers Which buffer(s) to flush. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] buffers Which buffer(s) to flush. * * @return SP_OK upon success, a negative error code otherwise. * @@ -1129,7 +1165,7 @@ enum sp_return sp_flush(struct sp_port *port, enum sp_buffer buffers); * signal handler, you would need to implement your own blocking * drain by polling the result of sp_output_waiting(). * - * @param port Pointer to port structure. + * @param[in] port Pointer to a port structure. Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -1155,6 +1191,10 @@ enum sp_return sp_drain(struct sp_port *port); * * The result should be freed after use by calling sp_free_event_set(). * + * @param[out] result_ptr If any error is returned, the variable pointed to by + * result_ptr will be set to NULL. Otherwise, it will + * be set to point to the event set. Must not be NULL. + * * @return SP_OK upon success, a negative error code otherwise. * * @since 0.1.0 @@ -1170,9 +1210,9 @@ enum sp_return sp_new_event_set(struct sp_event_set **result_ptr); * After the port is closed or the port structure freed, the results may * no longer be valid. * - * @param event_set Event set to update. - * @param port Pointer to port structure. - * @param mask Bitmask of events to be waited for. + * @param[in,out] event_set Event set to update. Must not be NULL. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[in] mask Bitmask of events to be waited for. * * @return SP_OK upon success, a negative error code otherwise. * @@ -1184,18 +1224,20 @@ enum sp_return sp_add_port_events(struct sp_event_set *event_set, /** * Wait for any of a set of events to occur. * - * @param event_set Event set to wait on. - * @param timeout Timeout in milliseconds, or zero to wait indefinitely. + * @param[in] event_set Event set to wait on. Must not be NULL. + * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely. * * @return SP_OK upon success, a negative error code otherwise. * * @since 0.1.0 */ -enum sp_return sp_wait(struct sp_event_set *event_set, unsigned int timeout); +enum sp_return sp_wait(struct sp_event_set *event_set, unsigned int timeout_ms); /** * Free a structure allocated by sp_new_event_set(). * + * @param[in] event_set Event set to free. Must not be NULL. + * * @since 0.1.0 */ void sp_free_event_set(struct sp_event_set *event_set); @@ -1218,8 +1260,9 @@ void sp_free_event_set(struct sp_event_set *event_set); * in which individual signals can be checked by bitwise OR with values of * the sp_signal enum. * - * @param port Pointer to port structure. - * @param signal_mask Pointer to variable to receive result. + * @param[in] port Pointer to a port structure. Must not be NULL. + * @param[out] signal_mask Pointer to a variable to receive the result. + * Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -1230,7 +1273,7 @@ enum sp_return sp_get_signals(struct sp_port *port, enum sp_signal *signal_mask) /** * Put the port transmit line into the break state. * - * @param port Pointer to port structure. + * @param[in] port Pointer to a port structure. Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -1241,7 +1284,7 @@ enum sp_return sp_start_break(struct sp_port *port); /** * Take the port transmit line out of the break state. * - * @param port Pointer to port structure. + * @param[in] port Pointer to a port structure. Must not be NULL. * * @return SP_OK upon success, a negative error code otherwise. * @@ -1289,6 +1332,8 @@ char *sp_last_error_message(void); /** * Free an error message returned by sp_last_error_message(). * + * @param[in] message The error message string to free. Must not be NULL. + * * @since 0.1.0 */ void sp_free_error_message(char *message); @@ -1305,6 +1350,9 @@ void sp_free_error_message(char *message); * * The default handler is sp_default_debug_handler(). * + * @param[in] handler The handler function to use. Can be NULL (in that case + * all debug messages will be ignored). + * * @since 0.1.0 */ void sp_set_debug_handler(void (*handler)(const char *format, ...)); @@ -1316,6 +1364,9 @@ void sp_set_debug_handler(void (*handler)(const char *format, ...)); * environment variable LIBSERIALPORT_DEBUG is set. Otherwise, they are * ignored. * + * @param[in] format The format string to use. Must not be NULL. + * @param[in] ... The variable length argument list to use. + * * @since 0.1.0 */ void sp_default_debug_handler(const char *format, ...);