X-Git-Url: http://sigrok.org/gitweb/?a=blobdiff_plain;f=hardware%2Fzeroplus-logic-cube%2Fzeroplus.c;h=6966ff83f103dba8cbe9870ab045fb265679775c;hb=c31e9ef49b84b61a353168956882140e2b5a93bb;hp=9b867dca43e134da40f30a3d989caad7ddaef0d9;hpb=86f5e3d826fc9059e110f07221cb1a30652ceac2;p=libsigrok.git
diff --git a/hardware/zeroplus-logic-cube/zeroplus.c b/hardware/zeroplus-logic-cube/zeroplus.c
index 9b867dca..6966ff83 100644
--- a/hardware/zeroplus-logic-cube/zeroplus.c
+++ b/hardware/zeroplus-logic-cube/zeroplus.c
@@ -17,15 +17,16 @@
* along with this program. If not, see .
*/
-#include "config.h"
#include
#include
+#include
#include
#include
#include
#include
-#include
-#include
+#include "config.h"
+#include "sigrok.h"
+#include "sigrok-internal.h"
#include "analyzer.h"
#define USB_VENDOR 0x0c12
@@ -73,6 +74,42 @@ static int capabilities[] = {
0,
};
+static const char *probe_names[] = {
+ "0",
+ "1",
+ "2",
+ "3",
+ "4",
+ "5",
+ "6",
+ "7",
+ "8",
+ "9",
+ "10",
+ "11",
+ "12",
+ "13",
+ "14",
+ "15",
+ "16",
+ "17",
+ "18",
+ "19",
+ "20",
+ "21",
+ "22",
+ "23",
+ "24",
+ "25",
+ "26",
+ "27",
+ "28",
+ "29",
+ "30",
+ "31",
+ NULL,
+};
+
/* List of struct sr_device_instance, maintained by opendev()/closedev(). */
static GSList *device_instances = NULL;
@@ -116,16 +153,17 @@ static struct sr_samplerates samplerates = {
supported_samplerates,
};
-/* TODO: All of these should go in a device-specific struct. */
-static uint64_t cur_samplerate = 0;
-static uint64_t limit_samples = 0;
-static int num_channels = 32; /* TODO: This isn't initialized before it's needed :( */
-static uint64_t memory_size = 0;
-static uint8_t probe_mask = 0;
-static uint8_t trigger_mask[NUM_TRIGGER_STAGES] = { 0 };
-static uint8_t trigger_value[NUM_TRIGGER_STAGES] = { 0 };
-
-// static uint8_t trigger_buffer[NUM_TRIGGER_STAGES] = { 0 };
+struct zp {
+ uint64_t cur_samplerate;
+ uint64_t period_ps;
+ uint64_t limit_samples;
+ int num_channels; /* TODO: This isn't initialized before it's needed :( */
+ uint64_t memory_size;
+ uint8_t probe_mask;
+ uint8_t trigger_mask[NUM_TRIGGER_STAGES];
+ uint8_t trigger_value[NUM_TRIGGER_STAGES];
+ // uint8_t trigger_buffer[NUM_TRIGGER_STAGES];
+};
static int hw_set_configuration(int device_index, int capability, void *value);
@@ -146,9 +184,17 @@ static unsigned int get_memory_size(int type)
static int opendev4(struct sr_device_instance **sdi, libusb_device *dev,
struct libusb_device_descriptor *des)
{
+ struct zp *zp;
unsigned int i;
int err;
+ /* Note: sdi is non-NULL, the caller already checked this. */
+
+ if (!(zp = (*sdi)->priv)) {
+ sr_err("zp: %s: (*sdi)->priv was NULL", __func__);
+ return -1;
+ }
+
if ((err = libusb_get_device_descriptor(dev, des))) {
sr_warn("failed to get device descriptor: %d", err);
return -1;
@@ -166,12 +212,12 @@ static int opendev4(struct sr_device_instance **sdi, libusb_device *dev,
sr_info("Found PID=%04X (%s)", des->idProduct,
zeroplus_models[i].model_name);
- num_channels = zeroplus_models[i].channels;
- memory_size = zeroplus_models[i].sample_depth * 1024;
+ zp->num_channels = zeroplus_models[i].channels;
+ zp->memory_size = zeroplus_models[i].sample_depth * 1024;
break;
}
- if (num_channels == 0) {
+ if (zp->num_channels == 0) {
sr_warn("Unknown ZeroPlus device %04X", des->idProduct);
return -2;
}
@@ -234,17 +280,21 @@ static void close_device(struct sr_device_instance *sdi)
sdi->status = SR_ST_INACTIVE;
}
-static int configure_probes(GSList *probes)
+static int configure_probes(struct sr_device_instance *sdi, GSList *probes)
{
+ struct zp *zp;
struct sr_probe *probe;
GSList *l;
int probe_bit, stage, i;
char *tc;
- probe_mask = 0;
+ /* Note: sdi and sdi->priv are non-NULL, the caller checked this. */
+ zp = sdi->priv;
+
+ zp->probe_mask = 0;
for (i = 0; i < NUM_TRIGGER_STAGES; i++) {
- trigger_mask[i] = 0;
- trigger_value[i] = 0;
+ zp->trigger_mask[i] = 0;
+ zp->trigger_value[i] = 0;
}
stage = -1;
@@ -253,14 +303,14 @@ static int configure_probes(GSList *probes)
if (probe->enabled == FALSE)
continue;
probe_bit = 1 << (probe->index - 1);
- probe_mask |= probe_bit;
+ zp->probe_mask |= probe_bit;
if (probe->trigger) {
stage = 0;
for (tc = probe->trigger; *tc; tc++) {
- trigger_mask[stage] |= probe_bit;
+ zp->trigger_mask[stage] |= probe_bit;
if (*tc == '1')
- trigger_value[stage] |= probe_bit;
+ zp->trigger_value[stage] |= probe_bit;
stage++;
if (stage > NUM_TRIGGER_STAGES)
return SR_ERR;
@@ -281,9 +331,27 @@ static int hw_init(const char *deviceinfo)
struct libusb_device_descriptor des;
libusb_device **devlist;
int err, devcnt, i;
+ struct zp *zp;
/* Avoid compiler warnings. */
- deviceinfo = deviceinfo;
+ (void)deviceinfo;
+
+ /* Allocate memory for our private driver context. */
+ if (!(zp = g_try_malloc(sizeof(struct zp)))) {
+ sr_err("zp: %s: struct zp malloc failed", __func__);
+ return 0;
+ }
+
+ /* Set some sane defaults. */
+ zp->cur_samplerate = 0;
+ zp->period_ps = 0;
+ zp->limit_samples = 0;
+ zp->num_channels = 32; /* TODO: This isn't initialized before it's needed :( */
+ zp->memory_size = 0;
+ zp->probe_mask = 0;
+ memset(zp->trigger_mask, 0, NUM_TRIGGER_STAGES);
+ memset(zp->trigger_value, 0, NUM_TRIGGER_STAGES);
+ // memset(zp->trigger_buffer, 0, NUM_TRIGGER_STAGES);
if (libusb_init(&usb_context) != 0) {
sr_warn("Failed to initialize USB.");
@@ -307,11 +375,18 @@ static int hw_init(const char *deviceinfo)
* TODO: Any way to detect specific model/version in
* the zeroplus range?
*/
+ /* Register the device with libsigrok. */
sdi = sr_device_instance_new(devcnt,
SR_ST_INACTIVE, USB_VENDOR_NAME,
USB_MODEL_NAME, USB_MODEL_VERSION);
- if (!sdi)
+ if (!sdi) {
+ sr_err("zp: %s: sr_device_instance_new failed",
+ __func__);
return 0;
+ }
+
+ sdi->priv = zp;
+
device_instances =
g_slist_append(device_instances, sdi);
sdi->usb = sr_usb_device_instance_new(
@@ -328,6 +403,7 @@ static int hw_init(const char *deviceinfo)
static int hw_opendev(int device_index)
{
struct sr_device_instance *sdi;
+ struct zp *zp;
int err;
if (!(sdi = zp_open_device(device_index))) {
@@ -335,6 +411,13 @@ static int hw_opendev(int device_index)
return SR_ERR;
}
+ /* TODO: Note: sdi is retrieved in zp_open_device(). */
+
+ if (!(zp = sdi->priv)) {
+ sr_err("zp: %s: sdi->priv was NULL", __func__);
+ return SR_ERR_ARG;
+ }
+
err = libusb_claim_interface(sdi->usb->devhdl, USB_INTERFACE);
if (err != 0) {
sr_warn("Unable to claim interface: %d", err);
@@ -360,22 +443,29 @@ static int hw_opendev(int device_index)
#endif
analyzer_set_compression(COMPRESSION_NONE);
- if (cur_samplerate == 0) {
+ if (zp->cur_samplerate == 0) {
/* Samplerate hasn't been set. Default to the slowest one. */
if (hw_set_configuration(device_index, SR_HWCAP_SAMPLERATE,
- &samplerates.low) == SR_ERR)
+ &samplerates.list[0]) == SR_ERR)
return SR_ERR;
}
return SR_OK;
}
-static void hw_closedev(int device_index)
+static int hw_closedev(int device_index)
{
struct sr_device_instance *sdi;
- if ((sdi = sr_get_device_instance(device_instances, device_index)))
- close_device(sdi);
+ if (!(sdi = sr_get_device_instance(device_instances, device_index))) {
+ sr_err("zp: %s: sdi was NULL", __func__);
+ return SR_ERR; /* TODO: SR_ERR_ARG? */
+ }
+
+ /* TODO */
+ close_device(sdi);
+
+ return SR_OK;
}
static void hw_cleanup(void)
@@ -400,17 +490,28 @@ static void hw_cleanup(void)
static void *hw_get_device_info(int device_index, int device_info_id)
{
struct sr_device_instance *sdi;
- void *info = NULL;
+ struct zp *zp;
+ void *info;
- if (!(sdi = sr_get_device_instance(device_instances, device_index)))
+ if (!(sdi = sr_get_device_instance(device_instances, device_index))) {
+ sr_err("zp: %s: sdi was NULL", __func__);
return NULL;
+ }
+
+ if (!(zp = sdi->priv)) {
+ sr_err("zp: %s: sdi->priv was NULL", __func__);
+ return NULL;
+ }
switch (device_info_id) {
case SR_DI_INSTANCE:
info = sdi;
break;
case SR_DI_NUM_PROBES:
- info = GINT_TO_POINTER(num_channels);
+ info = GINT_TO_POINTER(zp->num_channels);
+ break;
+ case SR_DI_PROBE_NAMES:
+ info = probe_names;
break;
case SR_DI_SAMPLERATES:
info = &samplerates;
@@ -419,7 +520,12 @@ static void *hw_get_device_info(int device_index, int device_info_id)
info = TRIGGER_TYPES;
break;
case SR_DI_CUR_SAMPLERATE:
- info = &cur_samplerate;
+ info = &zp->cur_samplerate;
+ break;
+ default:
+ /* Unknown device info ID, return NULL. */
+ sr_err("zp: %s: Unknown device info ID", __func__);
+ info = NULL;
break;
}
@@ -442,10 +548,23 @@ static int *hw_get_capabilities(void)
return capabilities;
}
-/* TODO: This will set the same samplerate for all devices. */
-static int set_configuration_samplerate(uint64_t samplerate)
+static int set_configuration_samplerate(struct sr_device_instance *sdi,
+ uint64_t samplerate)
{
- sr_info("%s(%" PRIu64 ")", __FUNCTION__, samplerate);
+ struct zp *zp;
+
+ if (!sdi) {
+ sr_err("zp: %s: sdi was NULL", __func__);
+ return SR_ERR_ARG;
+ }
+
+ if (!(zp = sdi->priv)) {
+ sr_err("zp: %s: sdi->priv was NULL", __func__);
+ return SR_ERR_ARG;
+ }
+
+ sr_info("zp: Setting samplerate to %" PRIu64 "Hz.", samplerate);
+
if (samplerate > SR_MHZ(1))
analyzer_set_freq(samplerate / SR_MHZ(1), FREQ_SCALE_MHZ);
else if (samplerate > SR_KHZ(1))
@@ -453,7 +572,8 @@ static int set_configuration_samplerate(uint64_t samplerate)
else
analyzer_set_freq(samplerate, FREQ_SCALE_HZ);
- cur_samplerate = samplerate;
+ zp->cur_samplerate = samplerate;
+ zp->period_ps = 1000000000000 / samplerate;
return SR_OK;
}
@@ -462,36 +582,54 @@ static int hw_set_configuration(int device_index, int capability, void *value)
{
struct sr_device_instance *sdi;
uint64_t *tmp_u64;
+ struct zp *zp;
- if (!(sdi = sr_get_device_instance(device_instances, device_index)))
+ if (!(sdi = sr_get_device_instance(device_instances, device_index))) {
+ sr_err("zp: %s: sdi was NULL", __func__);
return SR_ERR;
+ }
+
+ if (!(zp = sdi->priv)) {
+ sr_err("zp: %s: sdi->priv was NULL", __func__);
+ return SR_ERR_ARG;
+ }
switch (capability) {
case SR_HWCAP_SAMPLERATE:
tmp_u64 = value;
- return set_configuration_samplerate(*tmp_u64);
+ return set_configuration_samplerate(sdi, *tmp_u64);
case SR_HWCAP_PROBECONFIG:
- return configure_probes((GSList *) value);
+ return configure_probes(sdi, (GSList *)value);
case SR_HWCAP_LIMIT_SAMPLES:
tmp_u64 = value;
- limit_samples = *tmp_u64;
+ zp->limit_samples = *tmp_u64;
return SR_OK;
default:
return SR_ERR;
}
}
-static int hw_start_acquisition(int device_index, gpointer session_device_id)
+static int hw_start_acquisition(int device_index, gpointer session_data)
{
struct sr_device_instance *sdi;
struct sr_datafeed_packet packet;
+ struct sr_datafeed_logic logic;
struct sr_datafeed_header header;
+ uint64_t samples_read;
int res;
unsigned int packet_num;
unsigned char *buf;
+ struct zp *zp;
- if (!(sdi = sr_get_device_instance(device_instances, device_index)))
+ if (!(sdi = sr_get_device_instance(device_instances, device_index))) {
+ sr_err("zp: %s: sdi was NULL", __func__);
return SR_ERR;
+ }
+
+ if (!(zp = sdi->priv)) {
+ sr_err("zp: %s: sdi->priv was NULL", __func__);
+ return SR_ERR_ARG;
+ }
/* push configured settings to device */
analyzer_configure(sdi->usb->devhdl);
@@ -500,50 +638,48 @@ static int hw_start_acquisition(int device_index, gpointer session_device_id)
sr_info("Waiting for data");
analyzer_wait_data(sdi->usb->devhdl);
- sr_info("Stop address = 0x%x",
- analyzer_get_stop_address(sdi->usb->devhdl));
- sr_info("Now address = 0x%x",
- analyzer_get_now_address(sdi->usb->devhdl));
- sr_info("Trigger address = 0x%x",
- analyzer_get_trigger_address(sdi->usb->devhdl));
+ sr_info("Stop address = 0x%x", analyzer_get_stop_address(sdi->usb->devhdl));
+ sr_info("Now address = 0x%x", analyzer_get_now_address(sdi->usb->devhdl));
+ sr_info("Trigger address = 0x%x", analyzer_get_trigger_address(sdi->usb->devhdl));
packet.type = SR_DF_HEADER;
- packet.length = sizeof(struct sr_datafeed_header);
- packet.payload = (unsigned char *)&header;
+ packet.payload = &header;
header.feed_version = 1;
gettimeofday(&header.starttime, NULL);
- header.samplerate = cur_samplerate;
- header.protocol_id = SR_PROTO_RAW;
- header.num_logic_probes = num_channels;
+ header.samplerate = zp->cur_samplerate;
+ header.num_logic_probes = zp->num_channels;
header.num_analog_probes = 0;
- sr_session_bus(session_device_id, &packet);
+ sr_session_bus(session_data, &packet);
if (!(buf = g_try_malloc(PACKET_SIZE))) {
- sr_err("zeroplus: %s: buf malloc failed", __func__);
+ sr_err("zp: %s: buf malloc failed", __func__);
return SR_ERR_MALLOC;
}
+ samples_read = 0;
analyzer_read_start(sdi->usb->devhdl);
/* Send the incoming transfer to the session bus. */
- for (packet_num = 0; packet_num < (memory_size * 4 / PACKET_SIZE);
+ for (packet_num = 0; packet_num < (zp->memory_size * 4 / PACKET_SIZE);
packet_num++) {
res = analyzer_read_data(sdi->usb->devhdl, buf, PACKET_SIZE);
-#if 0
sr_info("Tried to read %llx bytes, actually read %x bytes",
PACKET_SIZE, res);
-#endif
packet.type = SR_DF_LOGIC;
- packet.length = PACKET_SIZE;
- packet.unitsize = 4;
- packet.payload = buf;
- sr_session_bus(session_device_id, &packet);
+ packet.timeoffset = samples_read * zp->period_ps;
+ packet.duration = res / 4 * zp->period_ps;
+ packet.payload = &logic;
+ logic.length = PACKET_SIZE;
+ logic.unitsize = 4;
+ logic.data = buf;
+ sr_session_bus(session_data, &packet);
+ samples_read += res / 4;
}
analyzer_read_stop(sdi->usb->devhdl);
g_free(buf);
packet.type = SR_DF_END;
- sr_session_bus(session_device_id, &packet);
+ sr_session_bus(session_data, &packet);
return SR_OK;
}