X-Git-Url: http://sigrok.org/gitweb/?a=blobdiff_plain;f=hardware%2Fikalogic-scanalogic2%2Fapi.c;h=fd0f217644d8538176b8f75623b9fecbd48b5238;hb=a4e435eb49c1fa30c31d5851b404001324cafe33;hp=b00f9adf3711d0a51e8b3e300410383a56cbc7e1;hpb=91aea754aaed0f0f2a6fc4b2b875f0d0b7c01f8e;p=libsigrok.git

diff --git a/hardware/ikalogic-scanalogic2/api.c b/hardware/ikalogic-scanalogic2/api.c
index b00f9adf..fd0f2176 100644
--- a/hardware/ikalogic-scanalogic2/api.c
+++ b/hardware/ikalogic-scanalogic2/api.c
@@ -23,10 +23,16 @@ static const int hwcaps[] = {
 	SR_CONF_LOGIC_ANALYZER,
 	SR_CONF_SAMPLERATE,
 	SR_CONF_LIMIT_SAMPLES,
-	SR_CONF_TRIGGER_TYPE,
+	SR_CONF_TRIGGER_MATCH,
 	SR_CONF_CAPTURE_RATIO,
 };
 
+static const int32_t trigger_matches[] = {
+	SR_TRIGGER_RISING,
+	SR_TRIGGER_FALLING,
+	SR_TRIGGER_EDGE,
+};
+
 SR_PRIV const uint64_t sl2_samplerates[NUM_SAMPLERATES] = {
 	SR_KHZ(1.25),
 	SR_KHZ(10),
@@ -41,7 +47,7 @@ SR_PRIV const uint64_t sl2_samplerates[NUM_SAMPLERATES] = {
 	SR_MHZ(20),
 };
 
-static const char *probe_names[NUM_PROBES + 1] = {
+static const char *channel_names[NUM_CHANNELS + 1] = {
 	"0", "1", "2", "3",
 	NULL,
 };
@@ -59,7 +65,7 @@ static GSList *scan(GSList *options)
 	GSList *usb_devices, *devices, *l;
 	struct drv_context *drvc;
 	struct sr_dev_inst *sdi;
-	struct sr_channel *probe;
+	struct sr_channel *ch;
 	struct dev_context *devc;
 	struct sr_usb_dev_inst *usb;
 	struct device_info dev_info;
@@ -136,11 +142,11 @@ static GSList *scan(GSList *options)
 		sdi->inst_type = SR_INST_USB;
 		sdi->conn = usb;
 
-		for (i = 0; probe_names[i]; i++) {
-			probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE,
-				probe_names[i]);
-			sdi->probes = g_slist_append(sdi->probes, probe);
-			devc->probes[i] = probe;
+		for (i = 0; channel_names[i]; i++) {
+			ch = sr_channel_new(i, SR_CHANNEL_LOGIC, TRUE,
+				channel_names[i]);
+			sdi->channels = g_slist_append(sdi->channels, ch);
+			devc->channels[i] = ch;
 		}
 
 		devc->state = STATE_IDLE;
@@ -390,8 +396,10 @@ static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi,
 		g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
 		*data = g_variant_builder_end(&gvb);
 		break;
-	case SR_CONF_TRIGGER_TYPE:
-		*data = g_variant_new_string(TRIGGER_TYPES);
+	case SR_CONF_TRIGGER_MATCH:
+		*data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
+				trigger_matches, ARRAY_SIZE(trigger_matches),
+				sizeof(int32_t));
 		break;
 	case SR_CONF_LIMIT_SAMPLES:
 		grange[0] = g_variant_new_uint64(0);
@@ -431,7 +439,7 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
 	 * The trigger must be configured first because the calculation of the
 	 * pre and post trigger samples depends on a configured trigger.
 	 */
-	sl2_configure_trigger(sdi);
+	sl2_convert_trigger(sdi);
 	sl2_calculate_trigger_samples(sdi);
 
 	trigger_bytes = devc->pre_trigger_bytes + devc->post_trigger_bytes;
@@ -443,21 +451,21 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
 	if (trigger_bytes % PACKET_NUM_SAMPLE_BYTES != 0)
 		devc->num_sample_packets++;
 
-	devc->num_enabled_probes = 0;
+	devc->num_enabled_channels = 0;
 
 	/*
-	 * Count the number of enabled probes and number them for a sequential
+	 * Count the number of enabled channels and number them for a sequential
 	 * access.
 	 */
-	for (i = 0, j = 0; i < NUM_PROBES; i++) {
-		if (devc->probes[i]->enabled) {
-			devc->num_enabled_probes++;
-			devc->probe_map[j] = i;
+	for (i = 0, j = 0; i < NUM_CHANNELS; i++) {
+		if (devc->channels[i]->enabled) {
+			devc->num_enabled_channels++;
+			devc->channel_map[j] = i;
 			j++;
 		}
 	}
 
-	sr_dbg("Number of enabled probes: %i.", devc->num_enabled_probes);
+	sr_dbg("Number of enabled channels: %i.", devc->num_enabled_channels);
 
 	/* Set up the transfer buffer for the acquisition. */
 	devc->xfer_data_out[0] = CMD_SAMPLE;