X-Git-Url: http://sigrok.org/gitweb/?a=blobdiff_plain;f=hardware%2Ffx2lafw%2Fprotocol.c;h=fc875d04446d2098b60827005f3a7acbe7b4468d;hb=HEAD;hp=836e27840941cbb2e9a114bd2048d1323d842ab4;hpb=335122f07d3768cc0fdfa5541030c3a546b8c054;p=libsigrok.git diff --git a/hardware/fx2lafw/protocol.c b/hardware/fx2lafw/protocol.c deleted file mode 100644 index 836e2784..00000000 --- a/hardware/fx2lafw/protocol.c +++ /dev/null @@ -1,529 +0,0 @@ -/* - * This file is part of the libsigrok project. - * - * Copyright (C) 2013 Bert Vermeulen - * Copyright (C) 2012 Joel Holdsworth - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "protocol.h" - -/* Protocol commands */ -#define CMD_GET_FW_VERSION 0xb0 -#define CMD_START 0xb1 -#define CMD_GET_REVID_VERSION 0xb2 - -#define CMD_START_FLAGS_WIDE_POS 5 -#define CMD_START_FLAGS_CLK_SRC_POS 6 - -#define CMD_START_FLAGS_SAMPLE_8BIT (0 << CMD_START_FLAGS_WIDE_POS) -#define CMD_START_FLAGS_SAMPLE_16BIT (1 << CMD_START_FLAGS_WIDE_POS) - -#define CMD_START_FLAGS_CLK_30MHZ (0 << CMD_START_FLAGS_CLK_SRC_POS) -#define CMD_START_FLAGS_CLK_48MHZ (1 << CMD_START_FLAGS_CLK_SRC_POS) - -#pragma pack(push, 1) - -struct version_info { - uint8_t major; - uint8_t minor; -}; - -struct cmd_start_acquisition { - uint8_t flags; - uint8_t sample_delay_h; - uint8_t sample_delay_l; -}; - -#pragma pack(pop) - -static int command_get_fw_version(libusb_device_handle *devhdl, - struct version_info *vi) -{ - int ret; - - ret = libusb_control_transfer(devhdl, LIBUSB_REQUEST_TYPE_VENDOR | - LIBUSB_ENDPOINT_IN, CMD_GET_FW_VERSION, 0x0000, 0x0000, - (unsigned char *)vi, sizeof(struct version_info), 100); - - if (ret < 0) { - sr_err("Unable to get version info: %s.", - libusb_error_name(ret)); - return SR_ERR; - } - - return SR_OK; -} - -static int command_get_revid_version(struct sr_dev_inst *sdi, uint8_t *revid) -{ - struct sr_usb_dev_inst *usb = sdi->conn; - libusb_device_handle *devhdl = usb->devhdl; - int ret; - - ret = libusb_control_transfer(devhdl, LIBUSB_REQUEST_TYPE_VENDOR | - LIBUSB_ENDPOINT_IN, CMD_GET_REVID_VERSION, 0x0000, 0x0000, - revid, 1, 100); - - if (ret < 0) { - sr_err("Unable to get REVID: %s.", libusb_error_name(ret)); - return SR_ERR; - } - - return SR_OK; -} - -SR_PRIV int fx2lafw_command_start_acquisition(const struct sr_dev_inst *sdi) -{ - struct dev_context *devc = sdi->priv; - struct sr_usb_dev_inst *usb = sdi->conn; - libusb_device_handle *devhdl = usb->devhdl; - uint64_t samplerate = devc->cur_samplerate; - gboolean samplewide = devc->sample_wide; - struct cmd_start_acquisition cmd = { 0 }; - int delay = 0, ret; - - /* Compute the sample rate. */ - if (samplewide && samplerate > MAX_16BIT_SAMPLE_RATE) { - sr_err("Unable to sample at %" PRIu64 "Hz " - "when collecting 16-bit samples.", samplerate); - return SR_ERR; - } - - if ((SR_MHZ(48) % samplerate) == 0) { - cmd.flags = CMD_START_FLAGS_CLK_48MHZ; - delay = SR_MHZ(48) / samplerate - 1; - if (delay > MAX_SAMPLE_DELAY) - delay = 0; - } - - if (delay == 0 && (SR_MHZ(30) % samplerate) == 0) { - cmd.flags = CMD_START_FLAGS_CLK_30MHZ; - delay = SR_MHZ(30) / samplerate - 1; - } - - sr_info("GPIF delay = %d, clocksource = %sMHz.", delay, - (cmd.flags & CMD_START_FLAGS_CLK_48MHZ) ? "48" : "30"); - - if (delay <= 0 || delay > MAX_SAMPLE_DELAY) { - sr_err("Unable to sample at %" PRIu64 "Hz.", samplerate); - return SR_ERR; - } - - cmd.sample_delay_h = (delay >> 8) & 0xff; - cmd.sample_delay_l = delay & 0xff; - - /* Select the sampling width. */ - cmd.flags |= samplewide ? CMD_START_FLAGS_SAMPLE_16BIT : - CMD_START_FLAGS_SAMPLE_8BIT; - - /* Send the control message. */ - ret = libusb_control_transfer(devhdl, LIBUSB_REQUEST_TYPE_VENDOR | - LIBUSB_ENDPOINT_OUT, CMD_START, 0x0000, 0x0000, - (unsigned char *)&cmd, sizeof(cmd), 100); - if (ret < 0) { - sr_err("Unable to send start command: %s.", - libusb_error_name(ret)); - return SR_ERR; - } - - return SR_OK; -} - -/** - * Check the USB configuration to determine if this is an fx2lafw device. - * - * @return TRUE if the device's configuration profile match fx2lafw - * configuration, FALSE otherwise. - */ -SR_PRIV gboolean fx2lafw_check_conf_profile(libusb_device *dev) -{ - struct libusb_device_descriptor des; - struct libusb_device_handle *hdl; - gboolean ret; - unsigned char strdesc[64]; - - hdl = NULL; - ret = FALSE; - while (!ret) { - /* Assume the FW has not been loaded, unless proven wrong. */ - if (libusb_get_device_descriptor(dev, &des) != 0) - break; - - if (libusb_open(dev, &hdl) != 0) - break; - - if (libusb_get_string_descriptor_ascii(hdl, - des.iManufacturer, strdesc, sizeof(strdesc)) < 0) - break; - if (strncmp((const char *)strdesc, "sigrok", 6)) - break; - - if (libusb_get_string_descriptor_ascii(hdl, - des.iProduct, strdesc, sizeof(strdesc)) < 0) - break; - if (strncmp((const char *)strdesc, "fx2lafw", 7)) - break; - - /* If we made it here, it must be an fx2lafw. */ - ret = TRUE; - } - if (hdl) - libusb_close(hdl); - - return ret; -} - -SR_PRIV int fx2lafw_dev_open(struct sr_dev_inst *sdi, struct sr_dev_driver *di) -{ - libusb_device **devlist; - struct sr_usb_dev_inst *usb; - struct libusb_device_descriptor des; - struct dev_context *devc; - struct drv_context *drvc; - struct version_info vi; - int ret, skip, i, device_count; - uint8_t revid; - - drvc = di->priv; - devc = sdi->priv; - usb = sdi->conn; - - if (sdi->status == SR_ST_ACTIVE) - /* Device is already in use. */ - return SR_ERR; - - skip = 0; - device_count = libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); - if (device_count < 0) { - sr_err("Failed to get device list: %s.", - libusb_error_name(device_count)); - return SR_ERR; - } - - for (i = 0; i < device_count; i++) { - if ((ret = libusb_get_device_descriptor(devlist[i], &des))) { - sr_err("Failed to get device descriptor: %s.", - libusb_error_name(ret)); - continue; - } - - if (des.idVendor != devc->profile->vid - || des.idProduct != devc->profile->pid) - continue; - - if (sdi->status == SR_ST_INITIALIZING) { - if (skip != sdi->index) { - /* Skip devices of this type that aren't the one we want. */ - skip += 1; - continue; - } - } else if (sdi->status == SR_ST_INACTIVE) { - /* - * This device is fully enumerated, so we need to find - * this device by vendor, product, bus and address. - */ - if (libusb_get_bus_number(devlist[i]) != usb->bus - || libusb_get_device_address(devlist[i]) != usb->address) - /* This is not the one. */ - continue; - } - - if (!(ret = libusb_open(devlist[i], &usb->devhdl))) { - if (usb->address == 0xff) - /* - * First time we touch this device after FW - * upload, so we don't know the address yet. - */ - usb->address = libusb_get_device_address(devlist[i]); - } else { - sr_err("Failed to open device: %s.", - libusb_error_name(ret)); - break; - } - - ret = command_get_fw_version(usb->devhdl, &vi); - if (ret != SR_OK) { - sr_err("Failed to get firmware version."); - break; - } - - ret = command_get_revid_version(sdi, &revid); - if (ret != SR_OK) { - sr_err("Failed to get REVID."); - break; - } - - /* - * Changes in major version mean incompatible/API changes, so - * bail out if we encounter an incompatible version. - * Different minor versions are OK, they should be compatible. - */ - if (vi.major != FX2LAFW_REQUIRED_VERSION_MAJOR) { - sr_err("Expected firmware version %d.x, " - "got %d.%d.", FX2LAFW_REQUIRED_VERSION_MAJOR, - vi.major, vi.minor); - break; - } - - sdi->status = SR_ST_ACTIVE; - sr_info("Opened device %d on %d.%d, " - "interface %d, firmware %d.%d.", - sdi->index, usb->bus, usb->address, - USB_INTERFACE, vi.major, vi.minor); - - sr_info("Detected REVID=%d, it's a Cypress CY7C68013%s.", - revid, (revid != 1) ? " (FX2)" : "A (FX2LP)"); - - break; - } - libusb_free_device_list(devlist, 1); - - if (sdi->status != SR_ST_ACTIVE) - return SR_ERR; - - return SR_OK; -} - -SR_PRIV struct dev_context *fx2lafw_dev_new(void) -{ - struct dev_context *devc; - - if (!(devc = g_try_malloc(sizeof(struct dev_context)))) { - sr_err("Device context malloc failed."); - return NULL; - } - - devc->profile = NULL; - devc->fw_updated = 0; - devc->cur_samplerate = 0; - devc->limit_samples = 0; - devc->sample_wide = FALSE; - devc->stl = NULL; - - return devc; -} - -SR_PRIV void fx2lafw_abort_acquisition(struct dev_context *devc) -{ - int i; - - devc->acq_aborted = TRUE; - - for (i = devc->num_transfers - 1; i >= 0; i--) { - if (devc->transfers[i]) - libusb_cancel_transfer(devc->transfers[i]); - } -} - -static void finish_acquisition(struct dev_context *devc) -{ - struct sr_datafeed_packet packet; - - /* Terminate session. */ - packet.type = SR_DF_END; - sr_session_send(devc->cb_data, &packet); - - /* Remove fds from polling. */ - usb_source_remove(devc->ctx); - - devc->num_transfers = 0; - g_free(devc->transfers); - - if (devc->stl) { - soft_trigger_logic_free(devc->stl); - devc->stl = NULL; - } -} - -static void free_transfer(struct libusb_transfer *transfer) -{ - struct sr_dev_inst *sdi; - struct dev_context *devc; - unsigned int i; - - sdi = transfer->user_data; - devc = sdi->priv; - - g_free(transfer->buffer); - transfer->buffer = NULL; - libusb_free_transfer(transfer); - - for (i = 0; i < devc->num_transfers; i++) { - if (devc->transfers[i] == transfer) { - devc->transfers[i] = NULL; - break; - } - } - - devc->submitted_transfers--; - if (devc->submitted_transfers == 0) - finish_acquisition(devc); -} - -static void resubmit_transfer(struct libusb_transfer *transfer) -{ - int ret; - - if ((ret = libusb_submit_transfer(transfer)) == LIBUSB_SUCCESS) - return; - - sr_err("%s: %s", __func__, libusb_error_name(ret)); - free_transfer(transfer); - -} - -SR_PRIV void fx2lafw_receive_transfer(struct libusb_transfer *transfer) -{ - struct sr_dev_inst *sdi; - struct dev_context *devc; - gboolean packet_has_error = FALSE; - struct sr_datafeed_packet packet; - struct sr_datafeed_logic logic; - unsigned int num_samples; - int trigger_offset, cur_sample_count, unitsize; - - sdi = transfer->user_data; - devc = sdi->priv; - - /* - * If acquisition has already ended, just free any queued up - * transfer that come in. - */ - if (devc->acq_aborted) { - free_transfer(transfer); - return; - } - - sr_info("receive_transfer(): status %d received %d bytes.", - transfer->status, transfer->actual_length); - - /* Save incoming transfer before reusing the transfer struct. */ - unitsize = devc->sample_wide ? 2 : 1; - cur_sample_count = transfer->actual_length / unitsize; - - switch (transfer->status) { - case LIBUSB_TRANSFER_NO_DEVICE: - fx2lafw_abort_acquisition(devc); - free_transfer(transfer); - return; - case LIBUSB_TRANSFER_COMPLETED: - case LIBUSB_TRANSFER_TIMED_OUT: /* We may have received some data though. */ - break; - default: - packet_has_error = TRUE; - break; - } - - if (transfer->actual_length == 0 || packet_has_error) { - devc->empty_transfer_count++; - if (devc->empty_transfer_count > MAX_EMPTY_TRANSFERS) { - /* - * The FX2 gave up. End the acquisition, the frontend - * will work out that the samplecount is short. - */ - fx2lafw_abort_acquisition(devc); - free_transfer(transfer); - } else { - resubmit_transfer(transfer); - } - return; - } else { - devc->empty_transfer_count = 0; - } - - if (devc->trigger_fired) { - if (devc->sent_samples < devc->limit_samples) { - /* Send the incoming transfer to the session bus. */ - packet.type = SR_DF_LOGIC; - packet.payload = &logic; - if (devc->sent_samples + cur_sample_count > devc->limit_samples) - num_samples = devc->limit_samples - devc->sent_samples; - else - num_samples = cur_sample_count; - logic.length = num_samples * unitsize; - logic.unitsize = unitsize; - logic.data = transfer->buffer; - sr_session_send(devc->cb_data, &packet); - devc->sent_samples += cur_sample_count; - } - } else { - trigger_offset = soft_trigger_logic_check(devc->stl, - transfer->buffer, transfer->actual_length); - if (trigger_offset > -1) { - packet.type = SR_DF_LOGIC; - packet.payload = &logic; - num_samples = cur_sample_count - trigger_offset; - if (devc->limit_samples && - num_samples > devc->limit_samples - devc->sent_samples) - num_samples = devc->limit_samples - devc->sent_samples; - logic.length = num_samples * unitsize; - logic.unitsize = unitsize; - logic.data = transfer->buffer + trigger_offset * unitsize; - sr_session_send(devc->cb_data, &packet); - devc->sent_samples += num_samples; - - devc->trigger_fired = TRUE; - } - } - - if (devc->limit_samples && devc->sent_samples >= devc->limit_samples) { - fx2lafw_abort_acquisition(devc); - free_transfer(transfer); - } else - resubmit_transfer(transfer); -} - -static unsigned int to_bytes_per_ms(unsigned int samplerate) -{ - return samplerate / 1000; -} - -SR_PRIV size_t fx2lafw_get_buffer_size(struct dev_context *devc) -{ - size_t s; - - /* - * The buffer should be large enough to hold 10ms of data and - * a multiple of 512. - */ - s = 10 * to_bytes_per_ms(devc->cur_samplerate); - return (s + 511) & ~511; -} - -SR_PRIV unsigned int fx2lafw_get_number_of_transfers(struct dev_context *devc) -{ - unsigned int n; - - /* Total buffer size should be able to hold about 500ms of data. */ - n = (500 * to_bytes_per_ms(devc->cur_samplerate) / - fx2lafw_get_buffer_size(devc)); - - if (n > NUM_SIMUL_TRANSFERS) - return NUM_SIMUL_TRANSFERS; - - return n; -} - -SR_PRIV unsigned int fx2lafw_get_timeout(struct dev_context *devc) -{ - size_t total_size; - unsigned int timeout; - - total_size = fx2lafw_get_buffer_size(devc) * - fx2lafw_get_number_of_transfers(devc); - timeout = total_size / to_bytes_per_ms(devc->cur_samplerate); - return timeout + timeout / 4; /* Leave a headroom of 25% percent. */ -}