X-Git-Url: http://sigrok.org/gitweb/?a=blobdiff_plain;f=decoders%2Fmodbus%2Fpd.py;h=d5cb811ef1794c226851fb3c6d8bde16c52568f3;hb=d4364948d0356f0659e1777cf771ed5bfc1f2072;hp=d427844ca490892151899e3d8bf8d94db128b9c6;hpb=db858a048288645d00eeb643dc43006ef9875280;p=libsigrokdecode.git

diff --git a/decoders/modbus/pd.py b/decoders/modbus/pd.py
index d427844..d5cb811 100644
--- a/decoders/modbus/pd.py
+++ b/decoders/modbus/pd.py
@@ -22,6 +22,7 @@ from math import ceil
 
 RX = 0
 TX = 1
+rxtx_channels = ('RX', 'TX')
 
 class No_more_data(Exception):
     '''This exception is a signal that we should stop parsing an ADU as there
@@ -124,18 +125,18 @@ class Modbus_ADU:
                 self.annotation_prefix + 'error',
                 'Message too short or not finished')
             self.hasError = True
-        if self.hasError and self.parent.options['channel'] == 'RX':
-            # If we are on RX mode (so client->server and server->client
-            # messages can be seperated) we like to mark blocks containing
-            # errors. We don't do this in TX mode, because then we interpret
-            # each frame as both a client->server and server->client frame, and
+        if self.hasError and self.parent.options['scchannel'] != self.parent.options['cschannel']:
+            # If we are decoding different channels (so client->server and
+            # server->client messages can be separated) we like to mark blocks
+            # containing errors. We don't do this when decoding the same
+            # channel as both a client->server and server->client frame, and
             # one of those is bound to contain an error, making highlighting
             # frames useless.
             self.parent.puta(data[0].start, data[-1].end,
                              'error-indication', 'Frame contains error')
         if len(data) > 256:
             try:
-                self.puti(len(data) - 1, self.annotation_prefix + 'error',
+                self.puti(len(data) - 1, 'error',
                     'Modbus data frames are limited to 256 bytes')
             except No_more_data:
                 pass
@@ -811,14 +812,15 @@ class Modbus_ADU_CS(Modbus_ADU):
         self.check_crc(bytecount + 12)
 
 class Decoder(srd.Decoder):
-    api_version = 2
+    api_version = 3
     id = 'modbus'
     name = 'Modbus'
     longname = 'Modbus RTU over RS232/RS485'
     desc = 'Modbus RTU protocol for industrial applications.'
-    license = 'gplv2+'
+    license = 'gplv3+'
     inputs = ['uart']
     outputs = ['modbus']
+    tags = ['Embedded/industrial']
     annotations = (
         ('sc-server-id', ''),
         ('sc-function', ''),
@@ -842,11 +844,17 @@ class Decoder(srd.Decoder):
         ('error-indicator', 'Errors in frame', (14,)),
     )
     options = (
-        {'id': 'channel', 'desc': 'Server -> client channel', 'default': 'RX',
-            'values': ('RX', 'TX')},
+        {'id': 'scchannel', 'desc': 'Server -> client channel',
+            'default': rxtx_channels[0], 'values': rxtx_channels},
+        {'id': 'cschannel', 'desc': 'Client -> server channel',
+            'default': rxtx_channels[1], 'values': rxtx_channels},
+        {'id': 'framegap', 'desc': 'Inter-frame bit gap', 'default': '28'},
     )
 
-    def __init__(self, **kwargs):
+    def __init__(self):
+        self.reset()
+
+    def reset(self):
         self.ADUSc = None # Start off with empty slave -> client ADU.
         self.ADUCs = None # Start off with empty client -> slave ADU.
 
@@ -904,7 +912,7 @@ class Decoder(srd.Decoder):
         # somewhere between seems fine.
         # A character is 11 bits long, so (3.5 + 1.5)/2 * 11 ~= 28
         # TODO: Display error for too short or too long.
-        if (ss - ADU.last_read) <= self.bitlength * 28:
+        if (ss - ADU.last_read) <= self.bitlength * int(self.options['framegap']):
             ADU.add_data(ss, es, data)
         else:
             # It's been too long since the last part of the ADU!
@@ -923,9 +931,7 @@ class Decoder(srd.Decoder):
 
         # Decide what ADU(s) we need this packet to go to.
         # Note that it's possible to go to both ADUs.
-        if rxtx == TX:
-            self.decode_adu(ss, es, data, 'Cs')
-        if rxtx == TX and self.options['channel'] == 'TX':
-            self.decode_adu(ss, es, data, 'Sc')
-        if rxtx == RX and self.options['channel'] == 'RX':
+        if rxtx_channels[rxtx] == self.options['scchannel']:
             self.decode_adu(ss, es, data, 'Sc')
+        if rxtx_channels[rxtx] == self.options['cschannel']:
+            self.decode_adu(ss, es, data, 'Cs')