X-Git-Url: http://sigrok.org/gitweb/?a=blobdiff_plain;f=README;h=a47a3953c07711b4a96f8f079acac400a10ace32;hb=ae5859fff08a8ccc8cba081d7500f75cc46114f7;hp=e25f227290885a27fc72386f9a3490909ce377c4;hpb=e21e846330070e102b24e08605b76b362020f500;p=libsigrok.git

diff --git a/README b/README
index e25f2272..a47a3953 100644
--- a/README
+++ b/README
@@ -3,12 +3,25 @@ README
 -------------------------------------------------------------------------------
 
 The sigrok project aims at creating a portable, cross-platform,
-Free/Libre/Open-Source logic analyzer software that supports various
-logic analyzer hardware products.
+Free/Libre/Open-Source signal analysis software suite that supports various
+device types (such as logic analyzers, oscilloscopes, multimeters, and more).
 
 libsigrok is a shared library written in C which provides the basic API
-for talking to logic analyzer hardware and reading/writing the acquired data
-into various input/output file formats.
+for talking to hardware and reading/writing the acquired data into various
+input/output file formats.
+
+
+Status
+------
+
+libsigrok is in a usable state and has had official tarball releases.
+
+While the API can change from release to release, this will always be
+properly documented and reflected in the package version number and
+in the shared library / libtool / .so-file version numbers.
+
+However, there are _NO_ guarantees at all for stable APIs in git snapshots!
+Distro packagers should only use released tarballs (no git snapshots).
 
 
 Requirements
@@ -21,11 +34,13 @@ Requirements
  - automake >= 1.11
  - libtool
  - pkg-config >= 0.22
- - libglib >= 2.28.0
- - libusb >= 1.0.5 (for most logic analyzer hardware)
+ - libglib >= 2.32.0
  - libzip >= 0.8
- - libftdi >= 0.16 (for some logic analyzer hardware)
- - libudev >= 151 (for some logic analyzer hardware)
+ - libusb-1.0 >= 1.0.9 (optional, used by most drivers)
+ - libftdi >= 0.16 (optional, used by some drivers)
+ - libudev >= 151 (optional, used by some drivers)
+ - libasound / alsa-lib >= 1.0 (optional, only used by the alsa driver)
+ - check >= 0.9.4 (optional, only needed to run unit tests)
 
 
 Building and installing
@@ -33,8 +48,8 @@ Building and installing
 
 In order to get the libsigrok source code and build it, run:
 
- $ git clone git://sigrok.git.sourceforge.net/gitroot/sigrok/sigrok
- $ cd sigrok/libsigrok
+ $ git clone git://sigrok.org/libsigrok
+ $ cd libsigrok
  $ ./autogen.sh
  $ ./configure
  $ make
@@ -43,29 +58,23 @@ For installing libsigrok:
 
  $ make install
 
-Please see the following wiki pages for more detailed instructions:
+See INSTALL or the following wiki page for more (OS-specific) instructions:
 
- http://sigrok.org/wiki/Linux
- http://sigrok.org/wiki/Mac_OS_X
- http://sigrok.org/wiki/Windows
- http://sigrok.org/wiki/FreeBSD
+ http://sigrok.org/wiki/Building
 
 
-Firmware
---------
+Device-specific issues
+----------------------
 
-Some devices supported by libsigrok need a firmware to be uploaded before the
-device can be used. 
-
-The default location where libsigrok expects the firmware files is:
-
-  $prefix/share/sigrok-firmware
+Please check README.devices for some notes and hints about device- or
+driver-specific issues to be aware of.
 
-($prefix is usually /usr/local or /usr, depending on your ./configure options)
 
-For further information see:
+Firmware
+--------
 
-  http://sigrok.org/wiki/Firmware
+Some devices supported by libsigrok need a firmware to be uploaded before the
+device can be used. See README.devices for details.
 
 
 Mailing lists
@@ -86,5 +95,5 @@ You can find the sigrok developers in the #sigrok IRC channel on Freenode.
 Website
 -------
 
-http://sigrok.org
+ http://sigrok.org/wiki/Libsigrok