X-Git-Url: http://sigrok.org/gitweb/?a=blobdiff_plain;ds=sidebyside;f=fx2lib%2Fexamples%2Fbulkloop%2Fdscr.a51;fp=fx2lib%2Fexamples%2Fbulkloop%2Fdscr.a51;h=0000000000000000000000000000000000000000;hb=94ca1bed405209b1fa36466174449f07b14127ab;hp=12991e431bca16c85b461225a9f5d95ce9b19bca;hpb=0bac7de529ed84f6b2236e41f435c5a4cd86ff95;p=sigrok-firmware-fx2lafw.git diff --git a/fx2lib/examples/bulkloop/dscr.a51 b/fx2lib/examples/bulkloop/dscr.a51 deleted file mode 100644 index 12991e43..00000000 --- a/fx2lib/examples/bulkloop/dscr.a51 +++ /dev/null @@ -1,225 +0,0 @@ -; Copyright (C) 2009 Ubixum, Inc. -; -; This library is free software; you can redistribute it and/or -; modify it under the terms of the GNU Lesser General Public -; License as published by the Free Software Foundation; either -; version 2.1 of the License, or (at your option) any later version. -; -; This library is distributed in the hope that it will be useful, -; but WITHOUT ANY WARRANTY; without even the implied warranty of -; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -; Lesser General Public License for more details. -; -; You should have received a copy of the GNU Lesser General Public -; License along with this library; if not, write to the Free Software -; Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - -; this is a the default -; full speed and high speed -; descriptors found in the TRM -; change however you want but leave -; the descriptor pointers so the setupdat.c file works right - - -.module DEV_DSCR - -; descriptor types -; same as setupdat.h -DSCR_DEVICE_TYPE=1 -DSCR_CONFIG_TYPE=2 -DSCR_STRING_TYPE=3 -DSCR_INTERFACE_TYPE=4 -DSCR_ENDPOINT_TYPE=5 -DSCR_DEVQUAL_TYPE=6 - -; for the repeating interfaces -DSCR_INTERFACE_LEN=9 -DSCR_ENDPOINT_LEN=7 - -; endpoint types -ENDPOINT_TYPE_CONTROL=0 -ENDPOINT_TYPE_ISO=1 -ENDPOINT_TYPE_BULK=2 -ENDPOINT_TYPE_INT=3 - - .globl _dev_dscr, _dev_qual_dscr, _highspd_dscr, _fullspd_dscr, _dev_strings, _dev_strings_end -; These need to be in code memory. If -; they aren't you'll have to manully copy them somewhere -; in code memory otherwise SUDPTRH:L don't work right - .area DSCR_AREA (CODE) - -_dev_dscr: - .db dev_dscr_end-_dev_dscr ; len - .db DSCR_DEVICE_TYPE ; type - .dw 0x0002 ; usb 2.0 - .db 0xff ; class (vendor specific) - .db 0xff ; subclass (vendor specific) - .db 0xff ; protocol (vendor specific) - .db 64 ; packet size (ep0) - .dw 0xB404 ; vendor id - .dw 0x0410 ; product id - .dw 0x0100 ; version id - .db 1 ; manufacturure str idx - .db 2 ; product str idx - .db 0 ; serial str idx - .db 1 ; n configurations -dev_dscr_end: - -_dev_qual_dscr: - .db dev_qualdscr_end-_dev_qual_dscr - .db DSCR_DEVQUAL_TYPE - .dw 0x0002 ; usb 2.0 - .db 0xff - .db 0xff - .db 0xff - .db 64 ; max packet - .db 1 ; n configs - .db 0 ; extra reserved byte -dev_qualdscr_end: - -_highspd_dscr: - .db highspd_dscr_end-_highspd_dscr ; dscr len ;; Descriptor length - .db DSCR_CONFIG_TYPE - ; can't use .dw because byte order is different - .db (highspd_dscr_realend-_highspd_dscr) % 256 ; total length of config lsb - .db (highspd_dscr_realend-_highspd_dscr) / 256 ; total length of config msb - .db 1 ; n interfaces - .db 1 ; config number - .db 0 ; config string - .db 0x80 ; attrs = bus powered, no wakeup - .db 0x32 ; max power = 100ma -highspd_dscr_end: - -; all the interfaces next -; NOTE the default TRM actually has more alt interfaces -; but you can add them back in if you need them. -; here, we just use the default alt setting 1 from the trm - .db DSCR_INTERFACE_LEN - .db DSCR_INTERFACE_TYPE - .db 0 ; index - .db 0 ; alt setting idx - .db 2 ; n endpoints - .db 0xff ; class - .db 0xff - .db 0xff - .db 3 ; string index - -; endpoint 2 out - .db DSCR_ENDPOINT_LEN - .db DSCR_ENDPOINT_TYPE - .db 0x02 ; ep2 dir=OUT and address - .db ENDPOINT_TYPE_BULK ; type - .db 0x00 ; max packet LSB - .db 0x02 ; max packet size=512 bytes - .db 0x00 ; polling interval - -; endpoint 6 in - .db DSCR_ENDPOINT_LEN - .db DSCR_ENDPOINT_TYPE - .db 0x86 ; ep6 dir=in and address - .db ENDPOINT_TYPE_BULK ; type - .db 0x00 ; max packet LSB - .db 0x02 ; max packet size=512 bytes - .db 0x00 ; polling interval - -highspd_dscr_realend: - - .even -_fullspd_dscr: - .db fullspd_dscr_end-_fullspd_dscr ; dscr len - .db DSCR_CONFIG_TYPE - ; can't use .dw because byte order is different - .db (fullspd_dscr_realend-_fullspd_dscr) % 256 ; total length of config lsb - .db (fullspd_dscr_realend-_fullspd_dscr) / 256 ; total length of config msb - .db 1 ; n interfaces - .db 1 ; config number - .db 0 ; config string - .db 0x80 ; attrs = bus powered, no wakeup - .db 0x32 ; max power = 100ma -fullspd_dscr_end: - -; all the interfaces next -; NOTE the default TRM actually has more alt interfaces -; but you can add them back in if you need them. -; here, we just use the default alt setting 1 from the trm - .db DSCR_INTERFACE_LEN - .db DSCR_INTERFACE_TYPE - .db 0 ; index - .db 0 ; alt setting idx - .db 2 ; n endpoints - .db 0xff ; class - .db 0xff - .db 0xff - .db 3 ; string index - -; endpoint 2 out - .db DSCR_ENDPOINT_LEN - .db DSCR_ENDPOINT_TYPE - .db 0x02 ; ep2 dir=OUT and address - .db ENDPOINT_TYPE_BULK ; type - .db 0x40 ; max packet LSB - .db 0x00 ; max packet size=64 bytes - .db 0x00 ; polling interval - -; endpoint 6 in - .db DSCR_ENDPOINT_LEN - .db DSCR_ENDPOINT_TYPE - .db 0x86 ; ep6 dir=in and address - .db ENDPOINT_TYPE_BULK ; type - .db 0x40 ; max packet LSB - .db 0x00 ; max packet size=64 bytes - .db 0x00 ; polling interval - -fullspd_dscr_realend: - -.even -_dev_strings: -; sample string -_string0: - .db string0end-_string0 ; len - .db DSCR_STRING_TYPE - .db 0x09, 0x04 ; who knows -string0end: -; add more strings here - -_string1: - .db string1end-_string1 - .db DSCR_STRING_TYPE - .ascii 'H' - .db 0 - .ascii 'i' - .db 0 -string1end: - -_string2: - .db string2end-_string2 - .db DSCR_STRING_TYPE - .ascii 'T' - .db 0 - .ascii 'h' - .db 0 - .ascii 'e' - .db 0 - .ascii 'r' - .db 0 - .ascii 'e' - .db 0 -string2end: - -_string3: - .db string3end-_string3 - .db DSCR_STRING_TYPE - .ascii 'i' - .db 0 - .ascii 'F' - .db 0 - .ascii 'a' - .db 0 - .ascii 'c' - .db 0 - .ascii 'e' - .db 0 -string3end: - -_dev_strings_end: - .dw 0x0000 ; just in case someone passes an index higher than the end to the firmware