-------------------------------------------------------------------------------
Philips RC-6 remote control captures
-------------------------------------------------------------------------------

These captures contain the IR data sent by various remote controls.

Logic analyzer setup
--------------------

The logic analyzer used was a Saleae Logic (at 1MHz):

  Probe       RC-6
  ----------------
  0           IR
  1           Raw

The data was captured using a TSOP1736 directly connected to channel 0.
For comparison a phototransistor is connected to channel 1. Only channel 0
should be used for decoding.


philips_RC2143604_numbers.sr
----------------------------

This capture was taken with a Philips RC2143604 remote control. The
sequence of keys is "power", 1, 2, ..., 9, 0.

Note that this remote uses Mode 0.


philips_unknown_numbers.sr
--------------------------

This capture was taken with an unknown Philips remote control. The
sequence of keys is "power", 1, 2, ..., 9.

Note that this remote uses Mode 0.